Preterminated Multiuse Platform

Preterminated Multiuse Platform
Are You Corning Connected?
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications
products without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/
trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2017 Corning Optical
Communications. All rights reserved. CRR-626-AEN / February 2017
Preterminated
Multiuse Platform
Preterminated Multiuse Platform
A
Fiber Optic Feeder Cable
F
Corning changed communications when we
invented low-loss optical fiber, and we continue to
lead the industry in product quality and innovation.
Our outdoor cables are engineered to withstand
your most challenging fiber optic applications, from
environmental extremes to mechanical forces.
Whether aerial or buried, we have the fiber count,
quality, and reliability your network demands.
Part Number
E
E
Terminal
A variety of terminal offerings are available
to mate to OptiTip® or OptiTap® connector
tethers, including traditional sealed terminals
as well as MDU housings in both standard and
splitter versions.
E
D
F
Description
Part Number
Description
Ribbon Cable
xxxZC5-14100D53
xxxEC4-14100D53
xxxEC5-14100D53
xxxEV4-14100D53
xxxEV5-14100D53
xxxZC5-14100D53
B
Splitter Terminals
SST-Ribbon™ Gel-Free, Armored Cable, SMF-28® Ultra fiber, (144-864 fibers)
SST-Ribbon Gel-Free, All-Dielectric, Non-Armored Cable, SMF-28e+®
(012-216 fibers) SST-Ribbon Gel-Free, Single-Jacket/Single-Armor Cable, SMF-28e+
(012-216 fibers) SST-UltraRibbon™ Gel-Free, All-Dielectric, Non-Armored Cable, SMF-28e+
(288-864 fibers)
SST-UltraRibbon Gel-Free, Single-Jacket/Single-Armor Cable, SMF-28e+
(288-864 fibers)
SST-Ribbon, Gel-Free, Armored Cable, SMF-28 Ultra fiber, (144-864 fibers)
E
F
E
B
C
The Centrix™ hardware system is specifically
designed for high-density FTTx applications and
is available with a variety of splitter and WDM
solutions that can be collocated within the same
hardware frame.
Standard Rear Cable Access Frame, 7 ft
Centrix Housing, 4U, 12 cassette positions, empty
OptiSheath Multiport Stubless Splitter Terminal, 1x4 splitter, OptiTap input
D
MSF-xx4848R43F-P
OptiSheath Multiport Flex Splitter Terminal, OptiTap input port, xx indicates
02, 04, or 08 (1:2, 1:4 or 1:8) split ratio, single-fiber female OptiTap per leg
LPT-DS000000006C-H
Low-Profile MDU Terminals with OptiTap® connector, (1) 1:4 splitter, 8 ports,
grommets
LPT-DS000000006C-F
Low-Profile MDU Terminals with OptiTap connector, (1) 1:8 splitter, 8 ports,
grommets
Standard Terminals
Central
Office
MTB-xx44FD010FW-P
OptiSheath Multiport Terminal, OptiTip stub, 10 ft, xx indicates 04, 08, or 12
port, single fiber per port
MTF-xx48FD010F-P
OptiSheath Multiport Flex Terminal, OptiTip stub, 10 ft, xx indicates 04, 08,
or 12 ports, single-fiber female OptiTap per leg
Multiport MF2 Terminal, OptiTip stub, 500 ft, xx indicates 02, 04,
MF02-M177xxEB4S500F OptiSheath
or 06 ports, two-fiber OptiTip connectors per port
A
Fiber Hardware
CTX-S4U
OptiSheath® Multiport Stubless Splitter Terminal, 1x8 splitter, OptiTap input
MTS-H444NS000MW
Outside Plant Standard Terminals
Description
CTX-SA-FRAME-7
MTS-F844NS000MW
MDU Splitter Terminals
F
Central Office
Part Number
Outside Plant Splitter Terminals
MDU Standard Terminals
MDU Terminal, OptiTip input ports, xx indicates 12, 24, 36, or 48
MDU0000xx6C-00M22Q OptiSheath
fiber capacity, SC APC distribution panel, no pigtails
F
Splice Cassette, 24 SC APC adapters and single-mode pigtails, MIC®
CTXCPP24-6C-2RH000 Centrix
900 µm standard single-mode pigtails
Drop Cable
Splice Housing, 4U, 288 F, 12 cassettes each with 24 SC APC adapters
CX4U8P24-6C-2RH000 Centrix
and single-mode pigtails, MIC 900 µm standard single-mode pigtails
C
Corning’s drop cable portfolio and associated
assemblies allow for full plug-and-play at the
subcriber premises and also support fieldinstallable terminations.
Local Convergence Point/Fiber Distribution Hub
The OptiTect® Local Convergence Cabinet,
MC Series is a preterminated, lightweight,
pole-mounted cabinet. This cabinet houses
splitters for the first layer split of a distributed
split PON architecture and has available ports for
pass-through of fiber to support other business
services or wireless backhaul needs.
Part Number
= Fiber Optic Cable
= Multiuse FlexNAP Cable
= Fiber Drop
SCF-6C28-01-F
Splice Closure, 192 single-fiber or 384 ribbon fiber splice capacity, 6-in
diameter, 28-in dome length, four drop ports (holds four SCF-ST-077 trays
not included)
SCF-ST-077
Dual-Purpose Splice Tray for use in SCF closure
00M212EB4D1ExxxF-P
12-Fiber Flat Drop Cable Pigtail with one end terminated with OptiTip
connector xxx ft
MG44C100-VC100
Preterminated Mini-Hub Cabinet with 48 feeder fibers (via four OptiTip
stubs) and 120 distribution fibers (via 10 OptiTip stubs); 48 express/
bypass patch panel; variable splitting options offer total serving capacity
from 120 to 768 depending upon configuration
MIS1AA6C06C01014
Splitter for Mini FDH, WB, (1) 1x4, adapter SC APC in/out
MIS1AA6C06C01018
Splitter for Mini FDH, WB, (1) 1x8, adapter SC APC in/out Cabinet
MIS1AA6C06C01032 Splitter for Mini FDH, WB, (1) 1x32, adapter SC APC in/out (coming soon)
Description
004301EB49RxxxF-P
OptiTap ROC™ Drop Cable Pigtail with FastAccess® technology, 900 µm, 1 F,
dielectric, xxx ft
004301EB19RxxxF-P
OptiTap ROC Drop Cable Pigtail with FastAccess technology, 900 µm, 1 F,
toneable, xxx ft
434401EB49RxxxF-P
OptiTap ROC Drop Cable Assembly, OptiTap to SC APC, 900 µm, 1 F,
dielectric, xxx ft
434401EB19RxxxF-P
OptiTap ROC Drop Cable Assembly, OptiTap to SC APC, 900 µm, 1 F,
toneable, xxx ft
434301EB4FDxxxF-P
OptiTap SST-Drop® Cable Assembly, OptiTap to OptiTap connector,
dielectric, xxx ft
434301EB1TDxxxF-P
OptiTap SST-Drop Cable Assembly, 1 F, OptiTap to OptiTap connector,
toneable, xxx ft
434401EB4FDxxxF-P
OptiTap SST-Drop Cable Assembly, 1 F, OptiTap connector to SC APC,
dielectric, xxx ft
434401EB1TDxxxF-P
OptiTap SST-Drop Cable Assembly, 1 F, OptiTap connector to SC APC,
toneable, xxx ft
Drops
D
Distribution & Terminal Access Point
Description
Closure and OptiTip® Pigtail
Part Number
Corning’s FlexNAP™ system
now accommodates
preterminated ends for
connecting to the mini-hub
cabinet and laterally to
other FlexNAP system cable
extensions. The multiuse
FlexNAP system offers the
ability to configure home run,
centralized, and distributed
split architectures in the
same system for optimal
flexibility in supporting
business, residential, and
wireless services. Additionally,
it utilizes self-supporting
RPX® ribbon cable for lowcost aerial installations.
Part Number
Description
Multiuse FlexNAP Distribution System
Preterminated Mount to Cabinet
OptiTip Pretermination for RPX cable, xx indicates 12, 24, 36,
PLCP-0xxEV4M1
or 48 fibers
Terminal Access Point
FlexNAP Terminal Access Point for dielectric RPX cable, 4 x 1 F
FSDTA0443TN015F
OptiTap® tether, staggered 15 ft on center
FlexNAP Terminal Access Point for dielectric RPX cable,
FSV4AxxM2TN005F
aerial, 1 OptiTip tether, xx indicates 04, 08, 12 fibers
In-Line Tether Extender
OptiTap (male) to OptiTap (female) Tether Extender,
434801EB1TDxxxF-P
toneable flat drop cable, single fiber, xxx ft
(male) to OptiTip (female) Tether Extender, dielectric
M1M212EB4D1ExxxF-P OptiTip
flat drop cable, 12 fiber, xxx ft
RPX Cable Accessories
AB910
Clamp Drop Cable Dead End, (Box of 25)
RPX-DEADEND-E1
Mechanical Wedge Dead End for RPX cable, used in
self-support applications, (Box of 10)
RPX-SUSP-H1
RPX Suspension Clamp (Box of 10)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising