OE14-502 - Kongsberg Maritime

OE14-502 - Kongsberg Maritime
OE14-502
January 2016
HIGH DEFINITION COLOUR ZOOM CAMERA
 High definition colour inspection camera
 Multi-standard video capability
 10:1 optical zoom lens
The Kongsberg Maritime OE14-502 Underwater HD
Camera is designed and priced to be used for all general
purpose ROV inspection tasks. Video output is available
as Component (Y, Pb, Pr) and HD-SDI on coax or fibre
connectors (Single or Multi-mode). CWDM alternative
wavelengths are also available. It is possible to easily
switch to high resolution composite video output if HD is
not required for certain tasks.
A domed water compensated port and optical zoom
provide a close-up inspection capability combined with
the flexibility of a 10x magnification for powerful stand off
inspections.
The OE14-502 is a multi-standard camera with the ability
to change video formats by IR remote control (RC) or by
GUI.
The inclusive Kongsberg Maritime Graphical User
Interface (GUI) provides control functionality via the
serial link.
Long line drive can be set by RC or GUI and allows the
component signal to drive three matched coax cables
with no degradation over three hundred metres. In
addition to full control of the camera using the GUI, white
balance can be set to 3,200K, 5,800K or to auto tracking
and back light compensation can be switched on or off
using the remote control.
The unique Kongsberg Maritime IR remote control also
allows camera control set-up. Camera control can be
single wire (tri-state), RS485 and RS232.
Applications
 Marine Science
 Manned Submersible
 HD and SD High End Inspection
TECHNICAL SPECIFICATIONS
Performance
Horizontal Resolution
Light Sensitivity
Minimum Scene Illumination
Signal to Noise Ratio
800 TVL/PH
100 mV video at 140 x 10-3 lux faceplate
350 mV video at 1 lux faceplate
2 lux
>54 dB (weighted)
Electrical
Scan Standard
Sensor Elements
Video Output
Power Input
Control
1080i / 720p, 50 fps
1080i / 720p, 59.94 fps
PAL / NTSC VBS Composite Video
1920(H) x 1080 (V)
HD-SDI over coax, HD-SDI over fibre (SM,MM, CWDM),
Component (Y,Pb,Pr), PAL and NTSC composite video
16 to 24 V dc, 700mA (max)
Single wire (tri-state), RS232, RS485 (user selectable via IR remote)
Optical
Lens
AOV in water
Iris Control
Focus Range
5.1mm to 51mm, F1.8
10x Optical Zoom
Horizontal: 45°
Vertical: 29°
Diagonal: 50°
Automatic (Manual using the GUI)
Front port to infinity (at wide angle)
800mm to Infinity (at narrow angle)
Mechanical
Dimensions
Weight
Housing Material
Connector
Diameter: 95mm (excl. bump guard)
Length: 222.5mm (excl. connector and bump guard)
In air 3.2Kg, in water 1.6Kg
Titanium Alloy, 6AL/4V ASTM B3 48
Configuration dependent
Environmental
4,500 msw (other depth rated housing options are available)
Operating: -5 to 40°C, Storage: -20 to 60°C
30G peak acceleration, 25ms half sine duration, on all three axes
10G, from 20 to150Hz on all three axes
BS EN 61000-6-3: 2001 Emission and BS EN 61000-6-1: 2001 Immunity
Features
White Balance
Back Light Compensation
Auto, 3,200K, 5,800K selectable through GUI or IR remote
Switch on and off using the GUI or IR remote
Over voltage and reverse polarity protection
Specifications subject to change without any further notice
KONGSBERG MARITIME
Telephone: +44 1224 226500
E-mail sales: km.camsales.uk@kongsberg.com
E-mail support: km.camsupport.uk@kongsberg.com
www.km.kongsberg.com
OE14502_Datasheet_A4 / Rev.B
Operating Depth
Temperature
Shock
Vibration
Electromagnetic Compatibility
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising