Floppy/hard drive expansion Features

Floppy/hard drive expansion Features
Floppy/hard drive expansion
The 5815 is an integrated drive card that comes with
one 1.44 MB 3.5” floppy drive. A single 2.5” hard drive
can mount directly onto the 5815 card. This card can be
used as a boot device for any microcontroller. The card
supports hard drive sizes up to the limits allowed by the
operating system.
Micro PC cards plug into any ISA expansion slot or
Micro PC card cage. The Octagon family of Micro PC
controllers, expansion cards, and card cages provide a
complete solution for applications in transportation,
security, military, communications, distributed control,
point–of–sale, ticketing machines, weighing equipment,
and other similar applications. The 5815 will withstand
high shock and vibration, and operates in temperature
ranges from –40° to +45° C. This rugged expansion
card will provide years of reliable service in the most
challenging environments.
The 5815 will withstand high shock and vibration, and
operates in temperature ranges from –4° to +45° C. This
rugged expansion card will provide years of reliable
service in the most challenging environments.
Octagon products are designed and
manufactured under the supervision
of an ISO 9001–2000 certified
quality management syste
Features
DRIVES:
N
One 1.44 MB 3.5” floppy included
N
Mounting position for one 2.5” hard drive
N
Floppy or hard drive can be used as boot drive
N
Supports larger drive sizes of later operating systems
(Windows® 98/2000, etc.)
N
On–board LED indicates hard drive access and floppy
disk insertion
FLOPPY DRIVE:
1
N
765B–compatible controller, 100% IBM compatible,
enabled via jumper
N
Standard floppy interrupt (IRQ6) and DMA (2) used
N
Powered through flex cable; no external power
connection required
6510 W. 91st Avenue • Westminster CO 80031 • 303–430–1500
www.octagonsystems.com
HARD
N
DRIVE:
ENVIRONMENTAL &
Can be enabled and configured through CPU system
BIOS/Setup or through on–board BIOS
POWER:
N
–40° to 45° C operating
N
–23° to 65° C nonoperating
N
Hard drive controller enabled with jumper
N
5% to 95%, RH, noncondensing
N
Configurable for IRQ5 or IRQ14
N
Size 3.55" x 3.755" x 0.50", PC/104 form factor
N
Powered through connector; no external power
source required
N
40g shock, 5g vibration, 3 axis (not mentioned in
manual, and might not apply to drives)
N
Idle, floppy drive only: 5V ±5% @ 100 mA
N
Motor on, floppy drive only: 5V ±5% @ 300 mA
N
Idle, floppy and hard drive: 5V ±5% @ 280 mA
N
Motor on, floppy and hard drive: 5V ±5% @ 660 mA
BASE
ADDRESS:
N
Hard drive uses addresses 1F0h—1F7h and
376h—377h; floppy uses 3F0h—3F7h
N
On–board BIOS, if used, starts at C800h or CC00h,
jumper selectable
ORDERING
INFORMATION
#4046 5815 floppy/hard drive card
2
6510 W. 91st Avenue • Westminster CO 80031 • 303–430–1500
www.octagonsystems.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising