QuickSpecs
QuickSpecs
HPE Standard Series Racks
Overview
HPE Standard Series Rack
The HPE Standard Series Rack is specifically designed for the value-minded customer. It presents significant savings while
providing a reliable industry standard rack that will fit many racking requirements.
The HPE Standard Series Rack is an industry standard 19" rack that can hold up to 2000 lbs of static load.
HPE Standard Series Rack Models
HP 42U 600mm x 1075mm Standard Pallet Rack
HP V142 1075mm deep Pallet 100 series Rack/S-Buy
AF046A
AF046S
Page 1
QuickSpecs
HPE Standard Series Racks
Overview
At a Glance
The HPE 42U Standard Pallet Rack is a full-featured, low cost rack option for HPE server and storage customers buying their first IT
rack. It is fully compatible with all HPE rack-mounted servers, storage, and networking products, but recommended for those
devices requiring less than 1075mm of depth. The HPE 42U Standard Pallet Rack is designed to meet the EIA-310D industry
specification and can be used with most other non-HPE 19-inch wide devices.
The HPE 42U 600mm x 1075mm Standard Pallet Rack includes:
•
•
•
•
•
•
Front door with perforated design for better air flow
Front and rear door handles and locks for security
Cable management, rack stabilizer, baying, grounding kit and other options available
Three-year limited warranty (3/0/0), parts only
Covered by HPE Server Care Pack when server and rack purchased together
Optional side panels come in 2 parts for ease of manageability and mounting
Page 2
QuickSpecs
HPE Standard Series Racks
Standard Features
Rack Compatibility
The following HPE IT solutions are supported by the HPE 42U Standard Pallet Rack:
•
•
•
•
•
•
HPE Rack and Tower ProLiant Servers (Recommended)
HPE BladeSystem Enclosures
HPE HyperScale Servers
HPE Mission-Critical Servers
HPE Storage
HPE Networking
HPE 42U Standard Pallet Racks utilize the industry-standard 19-inch RETMA rack design (now EIA)
and can support most other non-HPE devices designed to mount in a 19-inch rack.
Rack Load Support
HPE racks are designed to support high capacity weight loads that include the weight of the rack and
all the equipment installed. All HPE racks are tested to provide the following maximum weight loads:
•
•
•
Static Load – maximum loaded weight that a rack can support without any movement;
Dynamic Load (Rolling) – maximum loaded weight a rack can support while being moved (or
rolled) within a data center or facility;
Dynamic Load (Shipping) – maximum loaded weight a rack can support while being shipped
to data center or facility – this includes services such as HPE Factory Express.
The HPE 42U Standard Rack is rated for Static Loads only (maximum of 2000 lbs. or 907 kg) and
should never be used to transport installed IT equipment to or within an IT facility. If transportation or
movement of installed equipment within a rack is required, Hewlett Packard Enterprise recommends
that you review the Advanced and Enterprise racks for rack options rated for Dynamic Loads.
Compliance
EIA
UL/CES Certification
WEEE
RoHS compliant
TAA compliant
HPE Support Services
The HPE Standard Rack conforms to EIA-310D Type A cabinet per section
4.1.1
No
Yes
Yes
Yes
HPE Care Pack services include coverage for the Hewlett Packard Enterprise branded hardware options
qualified for the server and purchased at the same time or afterward that are internal to the enclosure.
This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These
items will be covered at the same service level and for the same coverage period as the server.
Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or
storage systems installed within a rack, service also covers all HPE qualified rack options installed within
the same rack.
•
•
•
HPE Services
o To help streamline implementation and enhance ongoing support of rack solution,
Hewlett Packard Enterprise provides cost-effective service options with resources and
specialized expertise to complement customers’ in-house capabilities.
Installation and Startup services
o Take advantage of complete installation and implementation support-including global
rollout capabilities-to get rack solutions up-and-running rapidly, with minimal business
disruption.
Rack Option Hardware Support
Page 3
QuickSpecs
HPE Standard Series Racks
Standard Features
o
Cover rack options with a single convenient service package. HPE Care Pack Services
for rack-mounted ProLiant DL servers and storage products provide support for all
HPE-branded rack hardware options that are qualified for inclusion with the server at
the time of or after purchase. In addition, 22-inch and smaller external monitors, tower
units, and UPS options up to 3KVA are covered at the same service level and for the
same period as the server at no additional cost. Also covered are any additional HPEqualified rack options installed within the same rack.
HPE Care Pack Services help increase uptime and productivity with rapid response on a 24x7 or 13x5
basis. Both options feature same-day, 4-hour onsite assistance when service issues cannot be resolved
remotely. And both help enhance the return on server investment with proven HPE Services expertise
and consistent support levels across geographically dispersed sites.
NOTE: To learn more, please visit:
http://www.hp.com/services/servers
Page 4
QuickSpecs
HPE Standard Series Racks
Related Options
Hewlett Packard Enterprise offers a full line of accessories and options that can be added to a Standard Series Rack allowing you
to customize each rack to fit your IT requirements. HPE Standard Series Rack accessories include upgrades such as side panels,
baying kits, cable management kits, drawers, shelving, and filler panels. To build a complete rack and power infrastructure for your
IT environment, Hewlett Packard Enterprise also offers a full line of options that include power distribution units (PDU),
uninterruptible power systems (UPS), and KVM (keyboard, video, mouse) consoles and switches.
Rack Baying Kit
HP Standard Series Rack Baying Kit
NOTE: The baying kit is used to join two or more HPE 42U Standard Series Racks.
AF048A
Sidewall Panel Kits
HP Standard Series Rack Side Panels
NOTE: Lightweight, locking side panels for this 42U rack come in 2 sections for
better handling.
AF047A
Ballast Option Kit
HP 9000 and 10000 Rack Ballast Kit
NOTE: The Ballast Option Kit is designed to provide additional stability and
support when used with the Stabilizer Kit. It is typically used when very heavy
equipment is routinely installed, removed or accessed within the rack.
Rack Stabilization Kit
HP Standard Series Rack Stabilizer Kit
NOTE: The anti-tip stabilizer kits provide stability and support when equipment is
installed, removed or accessed within the rack.
NOTE: The stabilizing kit is recommended for single rack deployments.
AF049A
Grounding Kit
HP Standard Series Rack Grounding Kit
NOTE: Provides a dedicated ground system to maintain system performance and
protect equipment.
AF040A
120672-B21
HPE Cable Management Compaq Cable Management D Rings
NOTE: This kit consists of 10 "D" rings that can be for cable management.
Kits
HP Rack Cable Management Velcro Clips
HP Rack Cable Management Kit
NOTE: This kit provides an easy way to organize and route cables within HPE
Racks. Cable clips, cable rings, and 1U and 2U access panels are included.
168233-B21
HPE Locking Drawer
HP 2U Universal Locking Drawer
NOTE: This product mounts on all HPE Standard Series Racks with sliding rails and
is used to store CD's, Instruction manuals, tools, and any other item that is
frequently used at the rack. Drawer includes lock.
361591-B21
HPE Rack Cable Trays
HP 600 Wide Rack Top Cable Tray
HP 800 Wide Rack Top Cable Tray
383982-B21
383983-B21
379820-B21
AF099A
Page 5
QuickSpecs
HPE Standard Series Racks
Related Options
HPE Rack Top Cable Mgmt Transfer Tray
NOTE: The HPE Rack Top Cable Management Transfer Tray allows for cabling
trays to be connected even across different aisles in the datacenter.
383984-B21
Universal 1U Filler
Panels
HP 1U 10-pack Black Universal Filler Panel
HP 1U 100-pack Black Universal Filler Panel
NOTE: The blanking panels are made from high grade molded plastic, and are
designed to be installed without tools. The use of blanking panels is recommended
to ensure proper airflow.
HPE Basic Power
Distribution Units
(PDU)
NOTE: HPE Basic PDU’s provide reliable, low-cost power distribution throughout the rack and are
available in both vertical and horizontal form factors to allow for flexible installation in your rack. For
more information, please review the HPE Basic PDU QuickSpecs.
HPE Basic Power Distribution Unit: 1U/0U Version
HPE Basic 1.9kVA/L5-20P 16A/120V Outlets (12) 5-20R/Horizontal NA/JP PDU
H5M54A
HPE Basic 3.6kVA/60320 C20 Detachable 16A/230V Outlets (12) C13/Horizontal
H5M56A
WW PDU
NOTE: HPE Standard racks support 1U or 2U mounting of PDUs only.
HPE Basic Power Distribution Unit: Half Height Version
HPE Basic 2.8kVA/L5-30P 24A/120V Outlets (18) 5-20R/Vertical NA/JP PDU
H5M55A
HPE Basic 4.9kVA/60320 C20 Detachable 16A/230V Outlets (20) C13/Vertical WW
H5M57A
PDU
HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (20) C13/Vertical NA/JP PDU
H5M58A
HPE Basic 7.3kVA/60309 5-wire 32A/230V Outlets (20) C13/Vertical INTL PDU
H5M68A
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13/Vertical NA/JP PDU
H5M61A
HPE Basic Power Distribution Unit: Mid Height Version
HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP PDU
H5M59A
HPE Basic 7.3kVA/60309 3-wire 32A/230V Outlets (24) C13 (6) C19/Vertical INTL
H5M70A
PDU
HPE Basic 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (6) C19/Vertical NA PDU
H5M60A
HPE Basic 11kVA/60309 63A 3-wire 48A/230V Outlets (30) C13 (6) C19/Vertical
H5M71A
INTL PDU
HPE Basic 9.2kVA/50A Terminal Block 40A/230V Outlets (30) C13 (6) C19/Vertical
H5M75A
WW PDU
HPE Basic 3Ph 5.7kVA/ L21-20P 16A/120-208V Outlets (24) C13 (3) 5H5M63A
20R/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (24) C13 (3) C19 (3) 5H5M64A
20R/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (24) C13 (6) C19/Vertical
H5M62A
NA/JP PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (24) C13 (6) C19/Vertical
H5M72A
INTL PDU
HPE Basic Power Distribution Unit: Full Height Version
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (36) C13 (6) C19/Vertical
H5M73A
INTL PDU
HPE Basic 3Ph 11kVA/60309 16A/240V Outlets (36) C13 (6) C19/Vertical NA PDU
H5M67A
BW928A
BW929A
Page 6
QuickSpecs
HPE Standard Series Racks
Related Options
HPE Standard Power Distribution Unit: 480/277 Volt Version
HPE Basic 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (6) C19/Vertical NA PDU
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13/Vertical NA/JP PDU
HPE Basic 3Ph 11kVA/60309 16A/240V Outlets (36) C13 (6) C19/Vertical NA PDU
HPE Basic 9.2kVA/50A Terminal Block 40A/230V Outlets (30) C13 (6) C19/Vertical
WW PDU
HPE Basic 7.3kVA/60309 5-wire 32A/230V Outlets (20) C13/Vertical INTL PDU
HPE Basic 7.3kVA/60309 3-wire 32A/230V Outlets (24) C13 (6) C19/Vertical INTL
PDU
HPE Basic 11kVA/60309 63A 3-wire 48A/230V Outlets (30) C13 (6) C19/Vertical
INTL PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (24) C13 (6) C19/Vertical
INTL PDU
HPE Basic 3Ph 11kVA/60309 5-wire 16A/230V Outlets (36) C13 (6) C19/Vertical
INTL PDU
NOTE: Additional HPE Power Distribution Units are available. For a complete list of
all HPE PDUs and additional information: please visit http://www.hp.com/go/pdu
HPE Metered Power
Distribution Units
(PDU)
H5M60A
H5M61A
H5M67A
H5M75A
H5M68A
H5M70A
H5M71A
H5M72A
H5M73A
NOTE: HPE Monitored PDU’s provide reliable power distribution within your rack combined with
highly accurate power metering available for each power load segment. For more information, please
review the HPE Monitored PDU QuickSpecs.
HPE Monitored Power Distribution Unit: 1U Version
HPE Metered 2.8kVA/L5-30P 24A/120V Outlets (12) 5-20R/Horizontal NA/JP PDU
D9N43A
HPE Metered 3.6kVA/60320 C20 Detachable 16A/230V Outlets (12)
D9N46A
C13/Horizontal WW PDU
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (12) C13/Horizontal NA/JP PDU
D9N44A
HPE Monitored Power Distribution Unit: Half Height Version
HPE Metered 3.6kVA/60320 C20 Detachable 16A/230V Outlets (16) C13/Vertical
D9N45A
WW PDU
HPE Monitored Power Distribution Unit: Mid Height Version
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical NA/JP
D9N47A
PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlets (20) C13 (4) C19/Vertical
D9N48A
INTL PDU
HPE Metered 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (3) C19/Vertical
D9N51A
NA/JP PDU
HPE Metered 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (18) C13 (3) C19 (3) 5D9N53A
20R/Vertical NA/JP PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (18) C13 (3)
D9N55A
C19/Vertical INTL PDU
HPE Monitored Power Distribution Unit: Full Height Version
HPE Metered 8.3kVA/CS8265C 40A/208V Outlets (30) C13 (3) C19/Vertical NA
D9N49A
PDU
HPE Metered 7.3kVA/60309 32A 3-wire/230V Outlet (32) C13 (4) C19/Vertical
D9N50A
INTL PDU
HPE Metered 3Ph 11kVA/60309 5-wire 16A/230V Outlets (30) C13 (3)
D9N57A
C19/Vertical INTL PDU
Page 7
QuickSpecs
HPE Standard Series Racks
Related Options
HPE Metered 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12) C19/Vertical
NA/JP PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (30) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (24) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12) C13 (12)
C19/Vertical INTL PDU
HPE Metered 3Ph 22kVA/60309 5-wire 32A/230V Outlet (30) C13 (3) C19/Vertical
INTL PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (12) C13
(12) C19/Vertical NA/JP PDU
HPE Metered 3Ph 19.9kVA/L22-30P 24A/277V Outlets (30) RF-203P-HP/Vertical
NA PDU
HPE Environmental Sensor for Remote Monitored PDUs
HP Environmental Sensor for Remote Monitored and Managed PDUs
NOTE: Additional HPE Power Distribution Units are available. For a complete list of
all HPE PDUs and additional information: please visit http://www.hp.com/go/pdu
HPE Metered and
Switched Power
Distribution Units
(PDU)
D9N58A
D9N61A
D9N54A
D9N59A
D9N60A
D9N56A
D9N62A
D9N63A
E2D53A
NOTE: HPE Managed PDU’s provide reliable power distribution combined with highly accurate
power metering and switching that provide you with the ability to monitor and control each outlet.
For more information, please review the HPE Managed PDU QuickSpecs.
100-120V Single Phase
HPE Metered Switched 2.8kVA/L5-30P 24A/120V Outlets (24) 5-20R /Vertical
H8B48A
NA/JP PDU
200-240V Single Phase
HPE Metered Switched 3.6kVA/60320 C20 Detachable 16A/230V Outlets (7) C13
H8B49A
(1) C19/Vertical WW PDU
HPE Metered Switched 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4)
H8B50A
C19/Vertical NA/JP PDU
HPE Metered Switched 7.3kVA/60309 3-wire 32A/230V Outlets (20) C13 (4)
H8B51A
C19/Vertical INTL PDU
200-240V Three Phase
HPE Metered Switched 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (6)
H8B52A
C19/Vertical NA/JP PDU
HPE Metered Switched 3Ph 8.6kVA/L21-30P 24A/208V Outlets (20)C13 (3)C19
H8B53A
(1)5-20R/Vertical NA/JP PDU
HPE Metered Switched 3Ph 11kVA/60309 5-wire 16A/230V Outlets (21) C13 (3)
H8B54A
C19/Vertical INTL PDU
HPE Metered Switched 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12)
H8B55A
C19/Vertical NA/JP PDU
HPE Metered Switched 3Ph 17.3kVA/60309 4-wire 48A/208V Outlets (12) C13
H8B56A
(12) C19/Vertical NA/JP PDU
NOTE: Additional HPE Power Distribution Units are available. For a complete list of
all HPE PDUs and additional information: please visit http://www.hp.com/go/pdu
Page 8
QuickSpecs
HPE Standard Series Racks
Related Options
HPE Intelligent Power NOTE: HPE Intelligent PDU’s deliver a unique set of capabilities that not only allow you to meter and
Distribution Unit (PDU) switch individual outlets, but also communicate directly with each server to understand and track
power usage, configuration, and redundancy information. For more information, please review the
HPE Intelligent Power PDU QuickSpecs.
HPE 6 Outlet Intelligent Power Distribution Unit Cores
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal
AF520A
NA/JP PDU
HPE Intelligent Modular 8.3kVA/CS8265C 40A/208V Outlets (6) C19/Horizontal
AF521A
NA/JP PDU
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal
AF522A
NA/JP PDU
HPE Intelligent Modular 3Ph 14.4kVA/CS8365C 40A/208V Outlets (6)
AF533A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6)
AF523A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 30A 5-wire 24A/240V (6)
AF901A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal
AF525A
INTL PDU
HPE Intelligent Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6)
AF526A
C19/Horizontal INTL PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6)
AF527A
C19/Horizontal INTL PDU
NOTE: HPE Standard racks support 1U or 2U mounting of PDUs only.
HPE 12 Outlet Intelligent Power Distribution Unit Cores
HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12)
AF535A
C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12)
AF538A
C19/Horizontal INTL PDU
HPE Intelligent Power Distribution Unit Extension Bar Kits
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
AF547A
NOTE: Intelligent Extensions Bars have individually monitored outlets that are also
individually switchable for power cycling attached equipment. Each individual C13
outlet has Power Line Communications to support Intelligent Power Discovery
when connected to PLC enabled common slot power supplies.
HPE 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
AF528A
NOTE: Standard (non-intelligent) Extension Bars are monitored as a single load
segment and do not support Intelligent Power Discovery AF528A
NOTE: Additional HPE Power Distribution Units are available. For a complete list of
all HPE PDUs and additional information: please visit http://www.hp.com/go/pdu
HPE R1500 G4
Uninterruptible Power
Supply (UPS)
Line Interactive Single Phase UPS that provides up to 1.5kVA in a 1U rack mount form factor.
HPE R1500 G4 NA Uninterruptible Power System
J2Q99A
HPE R1500 G4 JP/TWN Uninterruptible Power System
J2R05A
HPE R1500 G4 INTL Uninterruptible Power System
J2R03A
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154342
(Worldwide)
Page 9
QuickSpecs
HPE Standard Series Racks
Related Options
HPE R/T2200 G4
Uninterruptible Power
System (UPS)
Line Interactive Single Phase UPS that provides up to 2.2kVA in a 2U rack mount form factor. System
can be converted for either rack or tower use.
HPE R/T2200 G4 NA/JP Uninterruptible Power System
J2R00A
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154342
(Worldwide)
HPE R/T3000 G4
Uninterruptible Power
System (UPS)
Line Interactive Single Phase UPS that provides up to 3kVA in a 2U rack mount form factor. System
can be converted for either rack or tower use.
HPE R/T3000 G4 Low Voltage NA/JP Uninterruptible Power System
J2R01A
HPE R/T3000 G4 High Voltage NA/JP Uninterruptible Power System
J2R02A
HPE R/T3000 G4 High Voltage INTL Uninterruptible Power System
J2R04A
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154342
(Worldwide)
HPE R5000
Uninterruptible Power
Systems (UPS)
Line Interactive Single Phase UPS that provides up to 5kVA in a 3U rack mount form factor.
HPE R5000 3U L630 High Voltage NA/JP Uninterruptible Power System
AF460A
HPE R5000 3U IEC309-32A High Voltage INTL Uninterruptible Power System
AF461A
NOTE: Please see the QuickSpecs additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154342
(Worldwide)
HPE R7000
Uninterruptible Power
Systems (UPS)
Line Interactive Single Phase UPS that provides up to 7kVA in a 4U rack mount form factor.
HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System
AF462A
HPE R7000 4U IEC-32A High Voltage INTL Uninterruptible Power System
AF463A
NOTE: Please see the QuickSpecs additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154342
(Worldwide)
HPE Online On Demand
3 Phase
Uninterruptible Power
Systems (UPS)
Online On-Demand Three-Phase UPS solution that is scalable to 72kVA.
HPE R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power
System
HPE R8000/3 8000kVA Three Phase INTL 6U Rackmount Uninterruptible Power
System
HPE R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power
System
HPE R12000/3 12000VA Three Phase INTL 6U Rackmount Uninterruptible Power
System
NOTE: Please see the QuickSpecs additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123376
(Worldwide)
HPE DirectFlow 3
AF431A
AF432A
AF429A
AF430A
Enterprise level rack-based UPS that can provide up to 19.9kVA of power in as little as 5U of rack
space.
Page 10
QuickSpecs
HPE Standard Series Racks
Related Options
Phase Uninterruptible 1U UPS
Power Systems (UPS) HPE R12000 DirectFlow - 1U Rackmount Uninterruptible Power System
HPE R12000 DirectFlow - POD 1U Rackmount Uninterruptible Power System
2U UPS
HPE R18000 DirectFlow - 2U Rackmount Uninterruptible Power System
NOTE: Please see the QuickSpecs additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123376
(Worldwide)
HPE KVM Consoles
HPE KVM Switch
Options
HPE LCD8500 1U Rackmount Console Kit Models
HP LCD8500 1U US Rackmount Console Kit
HP LCD8500 1U UK Rackmount Console Kit
HP LCD8500 1U DE Rackmount Console Kit
HP LCD8500 1U FR Rackmount Console Kit
HP LCD8500 1U JP Rackmount Console Kit
HP LCD8500 1U RU Rackmount Console Kit
HP LCD8500 1U INTL Rackmount Console Kit
HP LCD8500 1U US TAA Rackmount Console Kit
HPE Analog KVM Switches
HP 1x4 USB/PS2 KVM Console Switch
HP 1x4 KVM Console 6ft PS2 Cable
HP 1x4 KVM Console 6ft USB Cable
NOTE: USB cable required for supporting USB peripherals.
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04164460
(Worldwide)
HP 0x1x8 G3 KVM Console Switch
HP 0x2x16 G3 KVM Console Switch
HP KVM Console USB Interface Adapter
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123433
(Worldwide)
HPE Analog KVM Switches with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
HP KVM Console Serial/Power G2 Interface Adapter
NOTE: VT100 True Serial.
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04168373
(Worldwide)
HPE Digital KVM Switches with Virtual Media & CAC
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
G9Y75A
AF478A
AF479A
AF630A
AF631A
AF632A
AF633A
AF642A
AF643A
AF644A
AF645A
AF611A
AF612A
AF613A
AF651A
AF652A
AF628A
AF618A
AF619A
AF629A
AF625A
AF620A
AF621A
AF622A
Page 11
QuickSpecs
HPE Standard Series Racks
Related Options
Interface Adapters
HP KVM CAT5 1-pack PS/2 Interface Adapter
HP KVM Console USB Interface Adapter
HP KVM CAT5 1-pack Serial Interface Adapter
NOTE: Please see the QuickSpecs for additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04168374
(Worldwide)
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: http://www.hp.com/go/kvm
HPE Support Services
HPE Install Rack and Rack Options Service
262588-B21
AF628A
373035-B21
U2871E
Page 12
QuickSpecs
HPE Standard Series Racks
Technical Specifications
HPE Standard Pallet Rack
Dimensions (HxDxW)
80.00 x 42.13 x 23.63 in (203.2 x 107.01 x 60.02 cm)
Total Cabinet Area
Shipping (with packaging 85.28 x 47.24 x 27.95in (216.6 x 119.98 x 70.99 cm)
materials)
249 lb (112.94 kg)
Weight
Operating
278 lb (126.09 kg)
Shipping
2000 lb (907.18 kg)
Load
Static
Not applicable
Dynamic (Rolling)
Not applicable
Dynamic (Shipping)
Carbonite
Color
Doors
Carbonite
Frame
HPE Standard Pallet Rack does not include casters and cannot be CTO configured. Please see Advanced or Enterprise Series
Racks for configure to order options.
Environment-friendly End-of-life Management
Products and Approach and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in,
and recycling programs, in many geographic areas, for our products.
Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.
http://www.hpe.com/recycle
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by
treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard Enterprise web site.
These instructions may be used by recyclers and other WEEE
treatment facilities as well as HPE OEM customers who integrate and
re-sell Hewlett Packard Enterprise equipment.
http://www.hpe.com/recycle
Page 13
QuickSpecs
HPE Standard Series Racks
Summary of Changes
Date
06-Mar-2017
Version History
From Version 13 to 14
Action
Added
07-Oct-2016
23-Oct-2015
17-Aug-2015
From Version 12 to 13
From Version 11 to 12
From Version 10 to 11
Changed
Changed
Changed
24-Aug-2012
From Version 9 to 10
Removed
15-May-2012
From Version 8 to 9
Changed
30-Aug-2011
From Version 7 to 8
Changed
20-Jun-2011
From Version 6 to 7
Changed
16-Feb-2011
From Version 5 to 6
Changed
14-Jan-2011
From Version 4 to 5
Changed
16-Aug-2010
From Version 3 to 4
Removed
21-Jun-2010
From Version 2 to 3
Removed
19-Feb-2010
From Version 1 to 2
Changed
Description of Change
Note added under the HPE Basic Power Distribution Unit:
1U/0U Version and HPE 6 Outlet Intelligent Power
Distribution Unit Cores sections.
QuickSpecs was rebranded.
Overview section was revised.
Content changed throughout the entire QuickSpecs.
Note the title changed to HPE Standard Series Rack.
HPE UPS R1500 G2, HPE R/T 3000 Uninterrupted Power
System, HPE Rack-Mountable R5500 UPS, and HPE Serial
Console Server Options nodes were removed from Related
Options section.
Revised the Hard Drives section. Note that the title has
changed.
Product descriptions were revised throughout Related
Options and HPE R1500 G3 Uninterruptible Power Supply
(UPS) and HPE R/T3000 G2 Uninterruptible Power
System (UPS) were added.
What's New was added to the Overview.
Models and Related Options product descriptions were
revised.
Mentions of StorageWorks were removed.
TFT7600 Rackmount Keyboard and Monitors were
replaced with HPE TFT7600 G2 KVM Console Rackmount
Keyboard and Monitors in Keyboard and Monitors and
Serial Interface Adapter, 1-pack with power supply was
removed from HPE KVM Switch Options.
Changes made to the North America and Canada versions
only.
HPE R3000v Uninterruptible Power System (UPS) was
removed from Related Options.
HPE UPS R3000 Uninterruptible Power System and HPE
UPS R/T2200 G2 Models were removed from Related
Options.
Corrected the overview image.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
c04123338 - 13560 - Worldwide - V14 - 6-March-2017
Page 14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising