Manual - Kmart
Wireless Desktop Mouse and Keyboard
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with
accompanying recommendations or instructions where provided. This
warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange
(where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
warranty. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse or neglect.
Wireless Desktop Mouse and Keyboard
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995
(New Zealand) or alternatively, via Customer Help at for any difficulties with your product. Warranty claims and
claims for expense incurred in returning this product can be addressed to
our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Wireless Desktop Mouse and Keyboard
2.4Ghz wireless technology
Up to 1600 DPI and three resolutions for optional mouse sensitivity
Ergonomic design
Built-in nano receiver
How to install
1.Remove the mouse, USB receiver and keyboard out of the
packing .
2.Insert the USB receiver into the computer's USB port
3.Insert the 2× “AAA” batteries into the mouse, and 2× “AAA”batteries
into the keyboard, following the polarity guides in the battery
4.The LED light will shine for a period of time, then they will be able
to be used.
Advanced Functions:
Wireless Desktop Mouse and Keyboard
Auto Sleep Function:
The mouse will switch to sleep mode once inactive for 8 minutes.
Press any button to activate the mouse from sleep mode again.
Remove the battery from the mouse if it is not being used for a
long period of time
Wireless connection may be affected by high temperatures .
Magnetic fields or vibration.Re-connect the mouse using the
following steps:
1.Remove the USB receiver from the computer and re-insert
after a few seconds.
2.Press and hold the scroll wheel and the right click button
Simultaneously for a few seconds and then release .The device
will be able to be used again .
3.For the keyboard, press the ESC key and “K”key simutaneously
for a few seconds and then release . The keyboard will be able
to be used again.
To change the DPI(mouse sensitivity)
There are 3 types of DPI settings : 800/1200/1600 . The default DPI
setting is 1200.
1.Press the CPI button on the top of the mouse to change the
sensitivity .
2.Long press the left key +middle key 3 seconds = switching DPI
Low Battery Reminder
The power will run down during use of this mouse .When the LED
shines red, this indicates that the battery is low .Please insert new
1.2.4GHZ wireless radio wave transmits up to 10 meters.The
transmission distance will be shorter if there is an obstruction.
2.For the best possible responsiveness of the mouse,it is
recommended that it is used on a flat surface and/or with a mouse
Any alteration or amendment of this device is prohibited for user
without any explicit permission from responsible authorities.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF