105 Bonnie Drive Butler, PA 16002 724-283-4681 724-283-5939 (fax) www.bwieagle.com PRODUCT INFORMATION BULLETIN AIR-EAGLE® XLT PLUS High Power 900MHz RF Receiver MODEL 460-5000-DC DESCRIPTION The AIR-EAGLE XLT PLUS is an RF system designed for long range wireless remote control of electrical apparatus in a variety of industrial applications. Systems can consist of any number of receivers and handheld or contact input transmitters working together. The “460” series of receivers feature built-in repeating capability. They will listen for all transmissions from the control transmitter, perform commands if necessary and pass all commands on to any receiver within range. This receiver is equipped with 2 independent relays, capable of switching 5 amps @ 120VAC or 30VDC, which can be directly interfaced with the customer's equipment or P.L.C. Seven user selectable frequencies allow multiple systems to be used in the same area. The Air-Eagle XLT Plus is capable of receiving remote signals transmitted from up to 3500 feet away (with a handheld transmitter) or up to 10 miles away (with a stationary transmitter and external high gain antennas. APPROVALS CONTROLS & INDICATORS United States (FCC) OUR-9XTEND Canada (IC) 4214A-9XTEND INSTALLATION 1. 2. 3. 4. Mount the AIR-EAGLE XLT PLUS RECEIVER IN a convenient location. Install relay control wiring to the I/O terminal strip. Attach rubber duck antenna or coax from external antenna to connector on side of enclosure. Connect DC power to the proper terminals in your control circuit. Make the following connections on the PC Board Terminal Strip (TER1) TERMINAL STRIP WIRING (TER1) Terminal 1 Negative (-) 9-36VDC Terminal 2 Positive (+) 9-36VDC Terminal 3 Not Used Terminal 4 Not Used Terminal 5 Not Used Terminal 6 Not Used Terminal 7 Not Used Terminal 8 Not Used Terminal 9 N/O Relay 1 PWR/TX LED Dual color LED. Illuminates red while receiver is booting up; changes to green when boot-up is successful and unit is ready to operate. If this LED fails to turn green, recycle power to unit. Terminal 10 C Relay 1 Terminal 11 N/C Relay 1 Terminal 12 N/O Relay 2 LED1 Illuminates green while relay 1 is energized Terminal 13 C Relay 2 LED2 Illuminates green while relay 2 is energized Terminal 14 N/C Relay 2 AIR-EAGLE® XLT PLUS DIMENSIONS High Power 900MHz RF Receiver MODEL 460-5000-DC FREQUENCY & RELAY SET-UP This unit is shipped from the factory with SEL1 switches in the open positions. It will operate on frequency #1 and have a 10 second signal loss off-delay. If you wish to change the default setting, follow the instructions below: 1) 2) 3) 4) 5) Remove power from unit Remove top cover. Select desired network frequency and off-delay using table below. Reattach cover and apply power. Programming is now complete. FREQUENCY SELECTION SEL 1 (SW1, 2 &3): Network Frequency #1 (default) #2 #3 #4 #5 #6 #7 SW1 SW2 OPEN CLOSED OPEN CLOSED OPEN CLOSED OPEN SW3 OPEN OPEN CLOSED CLOSED OPEN OPEN CLOSED OPEN OPEN OPEN OPEN CLOSED CLOSED CLOSED RELAY SET-UP OPTIONS Open (default) SEL1 (SW4) Closed 10 Second Signal Loss Off-Delay (default) 60 Second Signal Loss Off-Delay REPLACEMENT PARTS & ACCESSORIES PC Board (Main) Standard Antenna (Included): RELAY OPERATION TX Signal Received 460-5002 Relay Function Input 1 Closed Relay 1 energizes, maintained momentary Input 2 Closed Relay 2 energizes, maintained momentary SPECIFICATIONS Power Supply 9-36 VDC, 16 W, 50/60 Hz Fuse Protected 2 amp Relay Contacts SPDT 5 amp @ 120VAC or 30VDC Receiver Range Approximately 1 Mile (Up to 10 miles with external antenna - see accessories) Receiver Frequency 900MHz Spread Spectrum RF Channels Seven independent network frequencies Enclosure Polycarbonate, NEMA 4, IP66 Operating Temp -40o F - +185o F DOCUMENT DATE: 5/21/15 / PRODUCT REV.4 900MHz Portable Antenna (For distances up to 1 Mile*) 49-1103 Optional Antennas and Accessories: 900MHz Omni Directional Antenna (For distances up to 10 miles*) 49-3101 900MHz 13dB Yagi Antenna Long Range Operation (For distances up to 10 miles*) 49-3102 49-4000-XX Flex Coax Cable w/Connectors (XX = # of Feet) Inline Lightening Arrestor 49-5002 * = Line of Sight LIMITED WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. This limited warranty, and any implied warranties that may exist under state law, apply only to the original purchaser of the equipment, and last only for as long as such purchaser continues to own the equipment. This warranty replaces all other warranties, express or implied including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. BWI Eagle makes no express warranties beyond those stated here. BWI disclaims without limitation, implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not allow the exclusion of implied warranties so this limitation may not apply to you. To obtain warranty service, contact BWI Eagle for a return material authorization. When returning equipment to BWI Eagle, the customer assumes the risk of damage or loss during shipping and is responsible for the shipping costs incurred.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project