telligence powerswitch
[PRODUCT SHEET ]
Product: Telligence PowerSwitch
HC-IPSWITCH8
TELLIGENCE POWERSWITCH
Features
ƒƒEight 100 Mbps Ethernet switch ports available
ƒƒUplink Ethernet port for expansion to other
network equipment
ƒƒPowered Ethernet capable, 12 mW per port
ƒƒRack mountable in one 483 mm (19 in) wide rack space
ƒƒIndustry standard Cat 5/5e/6 cabling
simplifies installation
ƒƒTwo status LEDs per port
ƒƒNo user configuration needed
The Telligence PowerSwitch™ is an Ethernet communication interface and power
supply for all IP devices residing on the Telligence™ patient-staff communications
network. It interconnects with system components by means of standard network
wiring, cabling, and connectors.
Suitable for rack mounting in a remote closet, the Telligence PowerSwitch
occupies one space in a standard 483 mm (19 in) wide EIA equipment rack.
Device wiring is via industry standard Cat 5/5e/6 cable. An AC power source
is required.
Devices interconnected through the Telligence PowerSwitch include the
Telligence Bridge™, ColorTouch™ VoIP Staff Consoles, ColorTouch VoIP Annunciators,
the Telephone Gateway, and the Telligence Station Gateway™. All, except the
Telephone Gateway, derive their power from the Telligence PowerSwitch’s
Powered Ethernet feature. The Telligence PowerSwitch does not require an
IP address.
PERFORMANCE SPECIFICATIONS
The Telligence PowerSwitch is an 8-port switch capable of processing 100 Mbps
Ethernet traffic. It also provides 12 milliwatts of power per port over the same
Cat 5/5e/6 network cabling via RJ-45 connectors.
The Telligence PowerSwitch is wall or rack mountable in a metal enclosure
and requires not more than 1U high rack space.
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Uplink
Uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Layer 4
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Layer 3
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Layer 2
HC-IPSWITCH8
Powered Ethernet,
8Ports + uplink
Uplink
Layer 1
Uplink
[PRODUCT SHEET: TELLIGENCE POWERSWITCH ]
Power specifications
Power source
120 VAC, 60 Hz
Power dissipation
125 W (427 BTUs)
Output load
40 VDC, 12 mW per port
Fuse
2.5 Amp AC
Compatibility
Telligence patient-staff communications networks
Indicators
Two LEDS per port: Power (green) and Data (amber). Also AC line indicator LED (green).
Terminations
Front: Eight RJ-45 switch ports, one RJ-45 uplink port, nine ports total
Rear: IEC 320 Receptacle, battery backup
Physical specifications
Dimensions (H x W x D)
4.4 x 48.3 x 30.5 cm (1.75 x 19 x 12 inch)
Mounting
19 in wide rack mountable, wall mounting in standard 3rd party sectional cabinet
UL 1069, CAN/CSA C22.2 No. 205, FCC (Part 15, Class A)
Ascom Patient Systems (US)
9024 Town Center Parkway #100
Lakewood Ranch, Florida 34202
Toll Free: 800 385 2639
www.ascom.us/ascom-telligence
11.2013 © Ascom (US) Inc. DOC0636721 Rev. 4
Certifications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising