How to use your Ezi-Pay Creon Terminal

How to use your Ezi-Pay Creon Terminal
USER GUIDE Ingenico ICT220 or ICT250
Setting up
1. Connect the terminal’s power cable and plug it into the wall, ensuring the wall socket is on.
2. Plug the phone cable into the IN port.
3. Plug the Ethernet cable into the ETH port.
Logging on
Your terminal will log you on automatically. To perform a manual logon:
1. Select Menu
2. Select option 4 – ACTIVATA ADMIN MENU
3. Select option 1 – LOGON
4. After logon is accepted, press CANCEL
Security
After a logon or settlement cutover, you’ll be required to enter a PIN. If you have a merchant card,
you’ll be required to enter your PIN with every transaction. The default PIN is 12369, which can be
changed if required. To change the PIN or the security level on your terminal, please contact Activata
customer care.
PAYMENT FIRST
For your security, ensure you receive confirmed payment BEFORE processing any Activata transaction.
Selling mobile top ups
1. Press MENU from the idle screen
2. Select option 5 – ACTIVATA TRANS MENU
3. Select option 1 - VOUCHER
4. Select Voucher Type
5. Select the desired amount from the available amounts
6. The terminal will print the top up voucher. To print your copy of the receipt, select ENTER when
prompted, else press CANCEL
Activata Retailer Guide – Ingenico ICT220 or ICT250
V1.0
Page 1
USER GUIDE Ingenico ICT220 or ICT250
Selling phone cards
1. Swipe the phone card through the terminal’s magstripe reader
2. If this is a brand new card, select ISSUE or select RECHARGE to top up a card that has
previously been used
4. If this is an ISSUE transaction, select the desired amount from the options displayed by pressing
the corresponding numeric key and then press ENTER. If this is a RECHARGE, key in the desired
amount, which can be from $1 to $50 and rounded to the nearest 5c and then press ENTER. To
load a value greater than $50, perform 2 transactions.
5. The terminal will respond ‘Recharge Supplied’ and will print the transaction receipt. Value will be
added to the phone card within a few minutes.
6. To print your copy of the receipt, select ENTER when prompted, else press CANCEL
Reprinting a receipt
1. Press MENU from the idle screen
2. Select option 4 – ACTIVATA ADMIN MENU
3. Select option 2 - ADMN
4. Select option 1 – REPRINT RECEIPT
.
Reconciling your terminal and printing your weekly invoice
Settle the terminal at the end of each day’s trading. This prints your total sales for the day and resets
the total to $0.
1. Press MENU from the idle screen
2. Select option 5 – ACTIVATA TRANS MENU
3. Select option 3 - SETTLE
Print your weekly invoice every Monday
At the end of Monday’s trading, carry out the settlement/cutover process above TWICE. The first
process will print your invoice for the previous week and the second will settle your terminal for the
day. IMPORTANT: On every other day, carry out the cutover process ONCE only. Cutting over the
terminal more frequently will cause inaccurate data to be displayed.
Loading paper into your terminal
The printer expects a roll of 57x38 thermal paper (that is, 57mm wide, and up to 38mm reel diameter).
1. Open the lid of the printer
2. Hold the paper reel, so that at least a few inches of the paper are feeding out from underneath the
reel and coming towards you
3. Ensure the roll has located itself on the plastic hubs and can spin freely
4. Hold the flap of paper down over the screen, and close the lid of the printer
5. Release the paper, and make sure the printer lid is firmly pressed down
Activata Retailer Guide – Ingenico ICT220 or ICT250
V1.0
Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising