2.5”HDD Enclosure
2.5”HDD Enclosure
Compact and Powerful storage solutions for your SATA HDD
Supports current
SATA II compliant
HDDs, fully backward
compatible with SATA
1.0 and SATA 1.0a
compliant HDDs
Provides bus power via
DC Jack to USB cable
Reduces power consumption with HDD
spin down support
Supports the hard drive
with full-length bridgeboard
Connects to host by
plug-n-play
Minimizes device footprint with compact size
Enhances durability and
enables frequent HDD
replacement with reinforced screw guides
DU-S10J
2.5” USB 2.0
DT-S11J
2.5” eSATA/USB2.0
The O’TOSTORE SATALite 2.5” Enclosure Series offers mobile users the optimum portable storage solution. The light and stylish SATALite DU-S10J
enables access to a SATA HDD via USB 2.0 connection. The DT-S11J combo
enclosure offers true connection versatility by adding an eSATA port and
included shielded external SATA cable, unlocking blazing fast SATA data
transfer speed in appropriately equipped hosts.
The SATALite DU-S10J is bundled with a USB2.0 data cable and DC Jack to
USB cable. The DT-S11J is bundled with a USB2.0 data cable and DC Jack to
USB-Y cable. The DC Jack to USB(-Y) cable supplies bus power provided by
the host to the SATAlite Enclosure, eliminating the need for a bulky AC
adapter, enhancing portability and reducing device footprint.
The HDD spin down function ensures efficient operation by intelligently
reducing power consumption to optimize energy efficiency. When the
host system is turned off, enters sleep mode, or when the enclosure is
safely removed from the host system, the user-installed hard disk in the
SATALite enclosure spins down, automatically, conserving consumption.
The hard disk spins up automatically once the host system is turned on or
wakes up from sleep mode for seamless performance. The attractive sliver
finish of the rugged aluminum cabinet looks great anywhere and provides
excellent heat dissipation to maintain optimal operating conditions,
protecting data and prolonging the life of the SATA HDD.
Windows
2000 XP
2003 Vista
Compatible
RoHS
The ST-EKB2 SATA-eSATA extension cable with bracket is an optional solution that enables use of the DT-S11J with host systems that have a mainboard equipped with an internal SATA connector but no eSATA port. The
O'TOLINK T-EC2S and T-EC2R eSATA ExpressCard host adapters enable use of
the DT-S11J with the many new notebook computers equipped with an
ExpressCard slot but no eSATA ports. An optional AC adapter is available on
request for host systems that do not provide adequate power.
Compact and powerful, the O’TOSTORE SATALite 2.5” HDD Enclosure Series offers
the most full-featured and cost effective mobile storage solution available for
protecting and transporting your valuable data in style.
2.5”HDD Enclosure
Compact and Powerful storage solutions for your SATA HDD
Optional accessories for DT-S11J
ST-EKB2
SATA-eSATA Extension Cable w/Bracket
Optional accessories for all models
5V/2A or 5V/2.8A universal AC/DC adapter
Model
Interface
HDD Support
Connector
DU-S10J
USB 2.0
2.5” , 9.5mm high SATA HDD
One USB mini-B receptacle
Data Transfer Rate
USB: 480Mbps
LED
Material
Power On / Access / Power Off
Cabinet: Aluminum
Front and rear panel: Plastic
120 x 76 x 16 mm
TBD
Bus power from host via DC
Jack to USB cable*
Dimension (L x W x H)
Weight (w/o HDD)
Power Supply
T-EC2S
eSATA ExpressCard Host Adapter
T-EC2R
RAID eSATA ExpressCard Host Adapter
DT-M11J
eSATA / USB 2.0
2.5” , 9.5mm high SATA HDD
One USB mini-B receptacle
One eSATA connector
eSATA: 300MBps
USB: 480Mbps
Power On / Access / Power Off
Cabinet: Aluminum
Front and rear panel: Plastic
133 x 76 x 16 mm
TBD
Bus power from host via DC Jack
to USB Y-cable*
* The host computer must provide a minimum total power of 5 Watts via two USB ports to power the enclosure
by DC Jack to USB cable. If adequate power is not provided by host USB ports the AC/DC adapter must be used.
SATALite Connects to the Host
PC
266MHz or faster CPU*
64MB of RAM**
Microsoft Windows 2000, XP,
2003 or Vista
One available USB 2.0 or
eSATA port (upon model)
Mac
Macintosh Power PC processor
64MB of RAM***
Mac OS 9.X or higher (PowerPC)/
Mac OS X 10.4 (Intel Core Duo)
One available USB 2.0 or
eSATA port (upon model)
* Microsoft Vista requires a minimum 800MHz CPU
** Microsoft Vista requires a minimum 512MB of RAM
*** (Mac OS X 10.4 requires 256MB of RAM)
eSATA cable
DT-S11J
DC Jack to USB Y-cable
and
DC Jack to USB-A cable
Connect to the host via eSATA
DU-S10C
USB A to mini B cable
USB-A to mini-B cable
Connect to the host via USB
DT-S11J
DC Jack to USB Y-cable
or
Connect to the host via USB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising