PROLINE Tops and Bases
PROLINE™ External Components PROLINE™ Tops and Bases
Modular Enclosure Systems
PROLINE™ External Components
PROLINE™ Tops and Bases
Spec-00429
H
763.422.2211
763.422.2600
0-mm Solid Base
The 0-mm bases are finished
with RAL 7035 textured light-gray
polyester powder paint (except
stainless steel). EMC bases are
finished with paint over plated
surfaces. Bases are made of
16-gauge steel.
Bulletin: P20, P20EM, P20S
Catalog Number
PB045
PB046
PB064
PB064HF2
PB065HF2
PB066
PB066HF2
PB066SS
PB068
PB068HF2
PB068SS
PB076
PB076HF2
PB078
PB078HF2
PB079
PB079HF2
PB084
PB084HF2
PB085
PB085HF2
PB086
PB086HF2
PB086SS
PB088
PB088HF2
PB088SS
PB089HF2
PB0105
PB0105HF2
PB0106
PB0106HF2
PB0106SS
PB0108
PB0108SS
PB0124
PB0125
PB0126
PB0126SS
PB0128
PB0165
PB0166
PB0168
1
Fits Frame B x C
400 x 500
400 x 600
600 x 400
600 x 400
600 x 500
600 x 600
600 x 600
600 x 600
600 x 800
600 x 800
600 x 800
700 x 600
700 x 600
700 x 800
700 x 800
700 x 900
700 x 900
800 x 400
800 x 400
800 x 500
800 x 500
800 x 600
800 x 600
800 x 600
800 x 800
800 x 800
800 x 800
800 x 900
1000 x 500
1000 x 500
1000 x 600
1000 x 600
1000 x 600
1000 x 800
1000 x 800
1200 x 400
1200 x 500
1200 x 600
1200 x 600
1200 x 800
1600 x 500
1600 x 600
1600 x 800
Modular Enclosure Systems
W (mm)
353
353
592
592
592
592
592
592
592
592
592
692
692
692
692
692
692
792
792
792
792
792
792
792
792
792
792
792
992
992
992
992
992
992
992
1192
1192
1192
1192
1192
1592
1592
1592
W (in.)
13.90
13.90
23.31
23.31
23.31
23.31
23.31
23.31
23.31
23.31
23.31
27.24
27.24
27.24
27.24
27.24
27.24
31.18
31.18
31.18
31.18
31.18
31.18
31.18
31.18
31.18
31.18
31.18
39.06
39.06
39.06
39.06
39.06
39.06
39.06
46.93
46.93
46.93
46.93
46.93
62.68
62.68
62.68
SUBJECT TO CHANGE WITHOUT NOTICE
D (mm)
453
592
353
353
453
553
553
553
753
753
753
553
553
753
753
853
853
353
353
453
453
553
553
553
753
753
753
853
453
453
553
553
553
753
753
353
453
553
553
753
453
553
753
D (in.)
17.83
23.31
13.90
13.90
17.83
21.77
21.77
21.77
29.65
29.65
29.65
21.77
21.77
29.65
29.65
33.58
33.58
13.90
13.90
17.83
17.83
21.77
21.77
21.77
29.65
29.65
29.65
33.58
17.83
17.83
21.77
21.77
21.77
29.65
29.65
13.90
17.83
21.77
21.77
29.65
17.83
21.77
29.65
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PROLINE™ External Components PROLINE™ Tops and Bases
100-mm Solid Base
The 100-mm base is finished with
RAL 9005 textured black polyester
powder paint (except stainless
steel). EMC bases are finished
with paint over plated surfaces.
Side gland plates and drill points
for locating optional casters are
included.
Bulletin: P20, P20EM, P20S
Catalog Number
PB145
PB146
PB164
PB165
PB165HF
PB166
PB166SS
PB168
PB168HF
PB168SS
PB176
PB178
PB179HF
PB184
PB184HF
PB185
PB185HF
PB186
PB188
PB189
PB1105
PB1105HF
PB1106
PB1106SS
PB1108
PB1108HF
PB1108SS
PB1124
PB1125
PB1126
PB1126SS
PB1128
PB1128SS
PB1165
PB1166
PB1168
Fits Frame B x C
400 x 500
400 x 600
600 x 400
600 x 500
600 x 500
600 x 600
600 x 600
600 x 800
600 x 800
600 x 800
700 x 600
700 x 800
700 x 900
800 x 400
800 x 400
800 x 500
800 x 500
800 x 600
800 x 800
800 x 900
1000 x 500
1000 x 500
1000 x 600
1000 x 600
1000 x 800
1000 x 800
1000 x 800
1200 x 400
1200 x 500
1200 x 600
1200 x 600
1200 x 800
1200 x 800
1600 x 500
1600 x 600
1600 x 800
Gauge
16
16
16
16
16
16
16
16
16
16
16
16
14
16
16
16
16
16
14
14
16
16
16
16
14
14
14
16
16
16
16
14
14
16
16
14
W (mm)
353
353
599
599
599
599
599
599
599
599
699
699
699
799
799
799
799
799
799
799
999
999
999
999
999
999
999
1199
1199
1199
1199
1199
1199
1599
1599
1599
PROLINE™ Frame Floor-Mounting Bracket
W (in.)
13.90
13.90
23.58
23.58
23.58
23.58
23.58
23.58
23.58
23.58
27.52
27.52
27.52
31.46
31.46
31.46
31.46
31.46
31.46
31.46
39.33
39.33
39.33
39.33
39.33
39.33
39.33
47.20
47.20
47.20
47.20
47.20
47.20
62.95
62.95
62.95
Catalog Number
PFBK
D (mm)
453
592
359
459
459
559
559
759
759
759
559
759
859
359
359
459
459
559
759
859
459
459
559
559
759
759
759
359
459
559
559
759
759
459
559
759
D (in.)
17.83
23.31
14.13
18.07
18.07
22.01
22.01
29.88
29.88
29.88
22.01
29.88
33.82
14.13
14.13
18.07
18.07
22.01
29.88
33.82
18.07
18.07
22.01
22.01
29.88
29.88
29.88
14.13
18.07
22.01
22.01
29.88
29.88
18.07
22.01
29.88
Description
PROLINE Frame Floor-Mounting Bracket
Provides a structural method of bolting a PROLINE™ frame to the
floor. Fits all frame sizes. Made of 12 gauge steel with plated finish.
Kit includes four brackets and mounting hardware.
Not for use on colocation frames, which include welded-in floor
mounting brackets.
Bulletin: DPY
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Modular Enclosure Systems
2
PROLINE™ External Components PROLINE™ Tops and Bases
100-mm Solid Base Joining, Side-to-Side
Joining provides a seal between the gland plate openings on
adjacent 100-mm solid bases and is used in combination with either
of the Side-to-Side Frame Joining Kits. A nylon wire edge protector
(see drawing) prevents wear and abrasion of wires and cables.
Bulletin: P20, P20EM
Catalog Number
PJ2FB
PJ2FBHF2
Description
Solid Base Joining, 100-mm Solid Bases, side-to-side
EMC Solid Base Joining, 100-mm Solid Bases, side-to-side
Cable Entry Gland Plate
Fits all standard PROLINE™ 100mm Solid Base gland openings.
Solid Base gland openings. Can be
used in place of standard solid gland
plates furnished with 100-mm Solid
Base. Adjustable opening for cable
entry is foam-lined to maintain a
dust-tight seal. Cable Entry Plate
is 14 gauge steel and finished with
RAL 9005 textured black polyester
powder paint.
Catalog Number
PCEGP
Bulletin: P20
Frame Feet
Four die-cast feet for use on the
bottom of PROLINE™ frames that
raise the frame 9 mm.
Catalog Number
PFFM12
Description
Frame Feet
Catalog Number
PLM12
Description
Post-type Levelers
Bulletin: P20
Levelers
Four post-type levelers allow
adjustment for uneven floors.
Levelers can be attached to the
bottom of a frame or to a 0-mm solid
base. Levelers are plated and the
leveler base is capped with plastic
to provide resistance to marring.
Adjustable for 17-mm to 35-mm
height. Ball and socket construction.
Four levelers will support a
maximum of 453.6 kg (1000 lb.).
Bulletin: P20
3
Modular Enclosure Systems
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PROLINE™ External Components PROLINE™ Tops and Bases
100-mm Plinth Base
Catalog Number
PPB145
Fits Frame B x C
400 x 500
PPB146
400 x 600
PPB164
600 x 400
PPB165
600 x 500
PPB166
600 x 600
PPB168
600 x 800
PPB176
700 x 600
PPB178
700 x 800
Plinth Bases install under an enclosure to provide space for cables
to enter from below. A Plinth Base consists of four corner supports
connected to four access panels.
The corner supports are cast aluminum. The access panels are 16
gauge steel and attach to the corner supports with screws.
Plinth Bases are finished with RAL 9005 black textured polyester
powder paint and include all necessary mounting hardware.
Order a gland plate system to provide Type 12 protection when using a
Plinth Base.
PPB179
700 x 900
PPB184
800 x 400
PPB185
800 x 500
PPB186
800 x 600
PPB188
800 x 800
Bulletin: P20
PPB189
800 x 900
PPB1105
1000 x 500
PPB1106
1000 x 600
PPB1108
1000 x 800
PPB1124
1200 x 400
PPB1125
1200 x 500
PPB1126
1200 x 600
PPB1128
1200 x 800
PPB1165
1600 x 500
PPB1166
1600 x 600
PPB1168
1600 x 800
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
W
mm/in.
399
15.71
399
15.71
599
23.58
599
23.58
599
23.58
599
23.58
699
27.52
699
27.52
699
27.52
799
31.46
799
31.46
799
31.46
799
31.46
799
31.46
999
39.33
999
39.33
999
39.33
1199
47.20
1199
47.20
1199
47.20
1199
47.20
1599
62.95
1599
62.95
1599
62.95
D
mm/in.
459
18.07
559
22.01
359
14.13
459
18.07
559
22.01
759
29.88
559
22.01
759
29.88
859
33.82
359
14.13
459
18.07
559
22.01
759
29.88
859
33.82
459
18.07
559
22.01
759
29.88
359
14.13
459
18.07
559
22.01
759
29.88
459
18.07
559
22.01
759
29.88
Modular Enclosure Systems
4
PROLINE™ External Components PROLINE™ Tops and Bases
200-mm Plinth Base
Plinth Bases install under an enclosure to provide space for cables
to enter from below. A Plinth Base consists of eight corner supports
connected to four access panels.
The corner supports are cast aluminum. The access panels are 16
gauge steel and attach to the corner supports with screws.
Plinth Bases have are finished with RAL 9005 black textured
polyester powder paint and include all necessary mounting
hardware.
Order a gland plate system to provide Type 12 protection when using a
plinth base.
Bulletin: P20
5
Modular Enclosure Systems
Catalog Number
PPB245
Fits Frame B x C
400 x 500
PPB266
600 x 600
PPB268
600 x 800
PPB276
700 x 600
PPB284
800 x 400
PPB285
800 x 500
PPB286
800 x 600
PPB288
800 x 800
PPB289
800 x 900
PPB2105
1000 x 500
PPB2106
1000 x 600
PPB2108
1000 x 800
PPB2124
1200 x 400
PPB2125
1200 x 500
PPB2126
1200 x 600
PPB2128
1200 x 800
PPB2165
1600 x 500
PPB2166
1600 x 600
PPB2168
1600 x 800
SUBJECT TO CHANGE WITHOUT NOTICE
W
mm/in.
399
15.71
599
23.58
599
23.58
699
27.52
799
31.46
799
31.46
799
31.46
799
31.46
799
31.46
999
39.33
999
39.33
999
39.33
1199
47.20
1199
47.20
1199
47.20
1199
47.20
1599
62.95
1599
62.95
1599
62.95
D
mm/in.
459
18.07
559
22.01
759
29.88
559
22.01
359
14.13
459
18.07
559
22.01
759
29.88
859
33.82
459
18.07
559
22.01
759
29.88
359
14.13
459
18.07
559
22.01
759
29.88
459
18.07
559
22.01
759
29.88
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PROLINE™ External Components PROLINE™ Tops and Bases
Vented Plinth Base Covers
Vented Plinth Base Covers install in the front and rear openings
of a standard plinth base in place of Solid Covers. Vented covers
allow air to circulate into the enclosure. Vented Plinth Base Covers
are available in 100-mm and 200-mm heights. These covers are
finished with RAL 9005 black polyester powder paint and include all
necessary mounting hardware.
A standard plinth base must be ordered in combination with Vented
Plinth Base covers to form a Vented Plinth Base. If using a gland plate
with the Vented Plinth Base, order a vented gland plate to provide air
circulation through the bottom of the enclosure.
Bulletin: P20
100-mm Vented Plinth Base Covers
Catalog Number
PPBCV1600
Fits Frame Type
Single-Bay
Fits Frame (B dimension)
600
PPBCV1700
Single-Bay
700
PPBCV1800
Single-Bay
800
PPBCV11000
Single-Bay
1000
PPBCV11200
Double-Bay
1200
PPBCV11600
Double-Bay
1600
200-mm Vented Plinth Base Covers
Catalog Number
PPBCV2600
Fits Frame Type
Single-Bay
Fits Frame (B dimension)
600
PPBCV2700
Single-Bay
700
PPBCV2800
Single-Bay
800
PPBCV21000
Single-Bay
1000
PPBCV21600
Double-Bay
1600
W
mm/in.
599
23.58
699
27.52
799
31.46
999
39.33
1199
47.20
1599
62.95
W
mm/in.
599
23.58
699
27.52
799
31.46
999
39.33
1599
62.95
Plinth Base Stacking Kit
Plinth bases are stackable with a
maximum recommendation of 400mm high. Kit consists of eight bolts
and nuts and eight each of two types
of washers used to join plinth bases.
Catalog Number
PPBSK
Description
Plinth Base Stacking Kit
Bulletin: P20
Replacement Filter Kit for Filtered Gland
Plate
Kit includes 12 disposable two-ply polyester replacement filters
for filtered gland plates. Two filters are required for double-bay
frames.
Catalog Number
PFK4012
PFK6020
PFK8120
Bulletin: P20
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
Filter Size
mm/in.
406 x 127
16.00 x 5.00
609 x 203
24.00 x 8.00
813 x 203
32.00 x 8.00
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Fits Frame B x C
600 x 400
800 x 500, 800 x 600, 800 x 800, 800 x 900,
1600 x 500, 1600 x 600, 1600 x 800
1000 x 500, 1000 x 600, 1000 x 800
Modular Enclosure Systems
6
PROLINE™ External Components PROLINE™ Tops and Bases
Gland Plates
Adjustable Gland Plates are used to seal the bottom of the
PROLINE™ frame. Solid, vented and shielded Gland Plates are
available. Solid and filtered gland plates include covers that are
gasketed to maintain Type 12 enclosure requirements. Gland plates
are 16 gauge steel and are finished with RAL 7035 textured lightgray polyester powder paint. EMC Gland Plates are finished with
paint over plated surfaces. All installation hardware is included.
Solid Gland Plate and EMC Gland Plate are accessories to 100-mm Solid
Base, 100-mm/200-mm Plinth Base, Mobile Base and Transportation
Base. These gland plates can be used without a base if casters, levelers
or frame feet are installed. EMC Gland Plate maintains a Type 1 rating.
Solid Gland Plate
The Solid Gland Plate can be used with all PROLINE subpanels or
rack angles. The gland plate consists of a base mounting surface
and two adjustable foam-gasketed plates that permit cable entry.
The plate can be rotated 180 degrees for front or rear cable entry.
Filtered (Vented) Gland Plate
Filtered Gland Plate is used only in conjunction with Vented Plinth
Base Covers. The plate can be used with all PROLINE subpanels or
rack angles. It consists of a mounting base, three adjustable plates
for cable entry, a filter and filter retaining rails. Manufactured
from 16 gauge steel and finished with RAL 7035 textured light-gray
polyester powder paint. Replacement filters available.
EMC Gland Plate
This gland plate can be used with subpanels or rack angles. Gland
plate consists of a base mounting surface and two adjustable gland
plates (both have a conductive coating) with conductive fabric-overfoam gasket for cable entry.
Bulletin: P20
Gland Plates for Single-Bay Frames
Catalog Number
PGP64
PGP64AHF
PGPV64
PGP65
PGP65AHF
PGPV65
PGP66
PGP66AHF
PGPV66
PGP68
PGP68AHF
PGPV68
PGPV76
PGP78
PGP78AHF
PGPV78
PGP79
PGP79AHF
PGP84
PGP85
PGPV85
PGP86
PGPV86
PGP88
PGP88AHF
PGPV88
PGP89
PGP89AHF
PGPV89
PGP105
PGP105AHF
PGP106
PGPV106
PGP108
PGP108AHF
PGPV108
7
Type
Solid
EMC
Filtered
Solid
EMC
Filtered
Solid
EMC
Filtered
Solid
EMC
Filtered
Filtered
Solid
EMC
Filtered
Solid
EMC
Solid
Solid
Filtered
Solid
Filtered
Solid
EMC
Filtered
Solid
EMC
Filtered
Solid
EMC
Solid
Filtered
Solid
EMC
Filtered
Modular Enclosure Systems
Fits Frame Size, Width
600
600
600
600
600
600
600
600
600
600
600
600
700
700
700
700
700
700
800
800
800
800
800
800
800
800
800
800
800
1000
1000
1000
1000
1000
1000
1000
SUBJECT TO CHANGE WITHOUT NOTICE
Fits Frame Size, Depth
400
400
400
500
500
500
600
600
600
800
800
800
600
800
800
800
900
900
400
500
500
600
600
800
800
800
900
900
900
500
500
600
600
800
800
800
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PROLINE™ External Components PROLINE™ Tops and Bases
Gland Plates for Double-Bay Frames
Type
Solid
Solid
Filtered
Solid
Filtered
Solid
Filtered
Solid
Filtered
Solid
Filtered
Solid
Solid
Catalog Number
PGP124
PGP125
PGPV125
PGP126
PGPV126
PGP128
PGPV128
PGP165
PGPV165
PGP166
PGPV166
PGP168
PGP186
Fits Frame Size, Width
1200
1200
1200
1200
1200
1200
1200
1600
1600
1600
1600
1600
1800
Mobile Base
Catalog Number
PMB66
PMB69
PMB86
PMB89
Fits Frame Size, Depth
400
500
500
600
600
800
800
500
500
600
600
800
600
AxB in.
40.91 x 23.62
52.72 x 23.62
40.91 x 31.50
52.72 x 31.50
AxB mm
1039 x 600
1339 x 600
1039 x 800
1339 x 800
Fits Frame B x C (mm)
600 x 500 and 600 x 600
600 x 800 and 600 x 900
800 x 500 and 800 x 600
800 x 800 and 800 x 900
Mobile Bases fit 600- and 800-mm wide frames. They extend
beyond the front and rear of 600-mm cabinets to provide enhanced
stability. Provides front extension only on 800-mm cabinets.
Constructed of steel finished in RAL 9005 textured black polyester
powder paint. The base fastens to the underside of the frame and
provides integral mounting of furnished casters. The front and rear
top surfaces of the base are trimmed with black rubber mats 3-mm
thick.
Casters and mounting hardware are furnished.
Four non-locking casters provide a maximum load-bearing
capacity of 1000 lb. (453.6 kg).
Exercise care when using casters to move the cabinet. Avoid tipping
and damage to the cabinet and its contents by slowly moving the
cabinet on its casters across smooth, flat flooring. Avoid:
• l arge cracks
• f loor displacement
• s eams
• gravel
• any other obstruction
Never use casters while transporting a cabinet by truck on
roadways.
Contact Hoffman if further information is needed.
Bulletin: P20
Mobile Base Leveling Kit
Levelers mount in the outer corners
of the Mobile Base, providing loadbearing capacity of 1000 lb. (453.6
kg).
Catalog Number
PMBLM12
Description
Mobile Base Leveling Kit
Use with
Mobile Base
Bulletin: P20
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Modular Enclosure Systems
8
PROLINE™ External Components PROLINE™ Tops and Bases
PROLINE™ Transportation Base
PROLINE™ Transportation Bases provide safe transportation for
PROLINE frames, from a single bay up to a maximum of 3000 mm
(118.11 in.) in a multiple-bay system.
Transportation bases can be configured in a variety of combinations.
Constructed from 10 gauge steel and finished with RAL 9005
textured black polyester powder paint. Unique design allows ROLA-LIFT® lifting access from each end. A removable gland plate
allows wire access between bases.
ROL-A-LIFT is a trademark of Skarnes Inc.
Bulletin: P20
Catalog Number
PTB166
PTB168
PTB186
PTB1106
PTB1126
AxBxC in.
6.57 x 23.62 x 23.62
6.57 x 23.62 x 31.50
6.57 x 31.50 x 23.62
6.57 x 39.37 x 23.62
6.57 x 47.24 x 23.62
AxBxC mm
167 x 600 x 600
167 x 600 x 800
167 x 800 x 600
167 x 1000 x 600
167 x 1200 x 600
Transportation Base Joining, Side-to-Side
Interconnects transportation bases. No provision for environmental
seal. Grommet, applied to edge of wire feed, is furnished. Kit
consists of six M10 bolts and washers.
Bulletin: P20
Catalog Number
PTJT
9
Description
Transportation Base Joining, Side-to-Side
Modular Enclosure Systems
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PROLINE™ External Components PROLINE™ Tops and Bases
Caster Kit
A set of four casters (two locking,
two non-locking) that mount directly
to the bottom of a PROLINE™ frame, 0-mm, or 100-mm Solid
Base or a Console. (Do not use on
plinth bases.) Casters elevate the
enclosure 110 mm (4.33 in.) when
installed. Caster frames are plated
steel with ball-bearing pivots.
Caster wheels are made of a black
polyamide material. Kit includes
M12 mounting hardware.
Order separately.
Casters Maximum Load: 1000 lb.
(453 kg)
Exercise care when using casters
to move the cabinet. Avoid tipping
and damage to the cabinet and
its contents by slowly moving
the cabinet on its casters across
smooth, flat flooring. Avoid:
• l arge cracks
• f loor displacement
• s eams
• gravel
• any other obstruction
Never use casters while
transporting a cabinet by truck on
roadways.
Contact Hoffman if further
information is needed.
Catalog Number
PC1M12
Description
Set of 4 Casters
Bulletin: P20
EQUIPMENT PROTECTION SOLUTIONS
Spec-00429 H
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Modular Enclosure Systems
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising