Python PowerTM AC/DC Power Supply/ Output Converter

Python PowerTM AC/DC Power Supply/ Output Converter
Python Power
TM
PYTHON
POWERTM
AC/DC
Power Supply/
Output
Converter
A cost-effective power
and output conversion
accessory for DC
sensors...
Python Power is an accessory
that allows a DC sensor to be
installed in locations where only
AC power is available or to simply
maximize installation efficiency.
Python consists of a universal,
in-line AC/DC power supply and
TRIAC switch. The integral TRIAC
output switch is controlled by the
sensor's low-voltage output,
automatically detecting a sinking
or sourcing output. The TRIAC is
then actuated.
The DC output will power most
types of sensors, allowing users to
take advantage of the advanced
features available in DC sensors
that are not available in AC
sensors. Unlike other products,
Python has a sleek design and
can be pulled through and stored
in a 1-inch straight conduit.
Python is a powerful performer
and an ideal converter for retro-fit
installations.
Accepting universal AC input
voltages from 85VAC to 265VAC,
the encapsulated housing and
integral cables are resistant to
most acids, bases, and food and
beverage.
Python is UL listed to
UL61010C-1 and CE certified to
EN61010C-1. Python's IP67
enclosure rating ensures it will
withstand washdown environments.
Python supports many sensing
applications where DC power is
unavailable. Because of this
versatility, it is a solid candidate
for almost every application in an
AC environment. Python is an
ideal converter for retro-fit
installations and a cost-effective,
time-saving solution for new
installations. Python accommodates all Hyde Park DC-powered
sensors, as well as most other
brands. Python can be used with
most any sensing technology,
including ultrasonic, photoelectric, and inductive proximity.
• Self-contained,
AC/DC power
converter
• Integral isolated
TRIAC output
• Sleek design
• Stored in or pulled
through a 1" straight
conduit
• IP67 enclosure
rating
• CE certified
PYTHON POWER™
patent pending
6-1
Operation
Depending on the type of sensor you are using, Python's model number will vary (see Model Reference Guide on page
6-3). The sensor you are using must operate on a 15VDC to 18VDC supply, consume 100mA or less of operating current,
and have a sink or source output.
SENSOR
AC
POWER
LOAD
CONTROL
15VDC
COM
AC/DC
DC
CABLE
LOAD
L N
YELLOW
VIOLET
RED/BLACK
RED/WHITE
TRIAC
PYTHON POWER
PM100-XX
WARNING: Applied AC
load must limit Python's
TRIAC switch to rated
current.
AC
CABLE
DRIVING POWER RELAY
SENSOR
AC
PLC
L N
AC
INPUTS
CONTROL
15VDC
COM
AC/DC
DC
CABLE
3
2
1
C
L
N
YELLOW
VIOLET
RED/BLACK
RED/WHITE
TRIAC
PYTHON POWER
PM100-XX
AC
CABLE
TYPICAL PLC CONNECTION
15VDC
COM
CONTROL
NC
BROWN
BLUE
WARNING: Applied AC
load must limit Python's
TRIAC switch to rated
current.
RED/BLK
AC SUPPLY
RED/WHT
AC SUPPLY
VIOLET
TRIAC SW
YELLOW
TRIAC SW
BLACK
WHITE
PM100-10
BLACK WIRE SPECIFICATIONS
PM100-XX
BLUE WIRE SPECIFICATIONS
Dimensions
6.000in
(152.4mm)
22 AWG BLACK
CABLE
18 AWG BLUE
CABLE
.285in
( 7.24mm)
.200in
( 5.08mm)
DC
39" (1m)
6-2
.950in
( 24.13mm)
NOTE: Python can be pulled
through 1in E.M.T.
OVERALL LENGTH
10.5ft. (3.2m)
AC
79" (2m)
Model Reference Guide - Python Power
Model
Connector
Female Contacts
Pinout, sensor connector
*SWITCH
CONTROL
4
PM100-00
M8
3
3
COMMON
*SWITCH
CONTROL 4
PM100-01
M8
4
1
V SUPPLY
NC
2
3
1
V SUPPLY
1
2
4
*SWITCH
CONTROL
3
COMMON
V SUPPLY
PM100-02
PM100-03
M12
4
NC
COMMON
NC
V SUPPLY
M12
Green LED - Power
Amber LED - Output (sink)
4
*SWITCH
CONTROL
1
2
4
3
COMMON
*SWITCH
CONTROL
NC
4
PM100-04
PM100-10
Mini
(7/8-11 thread)
4
AC Power Requirements
Supply Voltage:
85VAC to 265VAC, 50/60Hz
Current Consumption:
35 mA max.
Power Consumption:
4 VA max.
Installation category: II (IEC 60364-4-443)
Input fusing: non-replaceable, non-repairable
DC Output Ratings (to sensor)
Output voltage:
Minimum at rated current: 15VDC
Maximum at no load: 20VDC
Regulation: 40 V/A
Current, max. rated: 100mA
Current fault, max.: 200 mA
Pri/sec. isolation: 2200VAC, 1 min.
Turn-on delay, 100mA load, 90% final
voltage: 10ms typical
Turn-off delay, 0mA load, 10% full
voltage: 1s typical
2
V SUPPLY
No connector
General Specifications
3
1
BROWN
BLUE
BLACK
WHITE
n/a
Peak repetitive surge current: 1 A (100µs, 120pps)
On-state voltage: 3v max, @ 100 mA
Off-state leakage: 500nA max.
Holding current: 250µA typical
Critical rate of rise of off-state voltage: 600v/us
min.
Isolation surge voltage: 7500VAC min., 60Hz.
1 sec.
Turn-on time, full load, max voltage: 15ms max.
(zero-crossing)
Turn-off time, full load, max voltage: 15ms max.
(zero-crossing)
Over-current protection: internal fuse (nonreplaceable, non-repairable)
Environmental
Operating Temperature Range:
-25° to 60°C (-13° to 140°F)
Storage Temperature Range:
-40° to 85°C (-40° to 185°F)
Operating Humidity: 100%, non-condensing
Protection Ratings: Type 1 (UL50), IP67
COMMON
15VDC
COM
CONTROL
NC
Agency Approvals
CE Mark: CE conformity is declared to:
EN55011:1998 Group 1, Class A
EN61010C-1
EMC: EN61326:1997 Measur., Lab., and Control
FCC Class A (USA)
UL61010C-1 "Industrial Control Equipment"
File#E238344
FDA: Cables and over-mold are FDA compatible
non-contact
Declaration of Conformity available upon request
Construction
Dimensions: (length x diameter)
152 mm (6.0 in) x 24 mm (0.95 in)
AC cable: 4-wire, 18AWG, 300V, PVC:
2 m (79.0 in) x 7 mm (0.28 in) dia.
DC cable: 4-wire, 22AWG, 300V, PVC
1 m (39.0 in) x 5.2 mm (0.21 in) dia.
Material: PVC
Input fusing: non-replaceable, non-repairable
TRIAC Switch Ratings (switch AC current
PYTHON POWER™
only)
Features: optically isolated, zero-crossing
Switch voltage, maximum: 230VAC
Switch Current, maximum: 50mA@230VAC,
100mA@120VAC
Isolated from AC line
6-3
6-4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising