2013 Rear View Camera Installation

2013 Rear View Camera Installation
08/05/2013
2013 Rear View Camera Installation
“Rear View Camera Installation”
The RAM Chassis Cab is offered with a rear camera option package sales code XAC. Included in the
option package are a 10ft video cable (part number 68200274AA) and a user mountable camera (part
number 56038978AF). The camera output will be viewable either via video pane in the rear view mirror,
or a video screen in the radio, depending on the vehicle options
This Jumper-Camera kit is packaged within the upfitter bag located behind the driver’s seat (items in bag
are separate).
To install, first remove the video cable and the camera from the upfitter bag, extend the cable to locate
both end-connectors. Install the white connector from jumper onto the camera connector mate as
shown in the pictures. A ‘click’ will be heard when a secure connection has been achieved.
•Index
•Main Menu
•Chassis Cab Home
+
ALL
IN
OUT
08/05/2013
2013 Rear View Camera Installation
Route the video cable as desired, taking care to prevent in-use impact/abrasion damage. Add a
protective covering (such as convolute) if prudent. Secure the cable (using clips/straps) often in its
routing path. Install the black connector onto its chassis harness mate, located at the rear of the
vehicle. A ‘click’ will be heard when a secure connection is achieved.
Chassis harness camera connector located on
rear face of rear-most chassis cross-member.
The RAM Chassis Cab is offered with a rear camera option package sales code XAC. Included in the
option package are a 10ft video cable (part number 68200274AA) and a user mountable camera (part
number 56038978AF). The camera output will be viewable either via video pane in the rear view mirror,
or a video screen in the radio, depending on the vehicle options. A 30ft video cable (to replace the
supplied 10ft cable) will soon be offered for purchase from MOPAR.
This Jumper-Camera kit is packaged within the upfitter bag located behind the driver’s seat (items in bag
are separate).
Chassis
harness
withand
protective
cap removed.
NOTE:
Thisbag,
connector
may
becable to locate
To install, first
remove
the connector
video cable
the camera
from the
upfitter
extend
the
routed behind other harness wiring at this location and therefore somewhat difficult to see.
both end-connectors. Install the black connector from jumper onto the camera connector mate as
shown in the pictures. A ‘click’ will be heard when a secure connection has been achieved.
The camera is to be located/mounted in any location and angle as desired (dependent on either the 10ft
or MOPAR 30ft cable). A detailed dimensional drawing of the camera is shown below. Fasteners are
customer sourced.
Route the video cable as desired, taking care to prevent in-use impact/abrasion damage. Add a
protective covering (such as convolute) if prudent. Secure the cable (using clips/straps) often in its
routing path. Install the blackn connector onto its chassis harness mate, located at the rear of the
vehicle. A ‘click’ will be heard when a secure connection is achieved.
After completion, test the image in the radio or rear-view mirror by setting the vehicle in Reverse gear.
Adjust camera’s view and location as necessary.
For any questions or concerns, please contact us at rambbg@chrysler.com, or call toll-free at: 866/2054102.
•Index
•Main Menu
•Chassis Cab Home
+
ALL
IN
OUT
08/05/2013
2013 Rear View Camera Installation
“Rear View Camera Installation”
•Index
•Main Menu
•Chassis Cab Home
+
ALL
IN
OUT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising