Playing a Disc
Table of Contents
▲
Main Menu
▼
05/07/13 14:24:42 31S9A640 0114 Playing a Disc
U.S. LX and Canadian SE model
CD EJECT BUTTON
CD SLOT
SKIP BUTTONS
Features
POWER/VOLUME
KNOB
REPEAT BUTTON
CD BUTTON
RANDOM BUTTON
109
Table of Contents
▼
Main Menu
▲
05/06/30 10:10:28 31S9A640 0115 Playing a Disc
To Play a CD
To load or play CDs, the ignition
switch must be in the ACCESSORY
(I) or the ON(II) position.
You operate the CD player with the
same controls used for the radio. To
select the CD player, press the CD
button. The number of the track
playing is shown in the display. The
system will continuously play a CD
until you change modes.
Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
110
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
To play the radio when a CD is
playing, press the AM or FM button.
Press the CD button again to switch
back to the CD player.
To play the tape when a CD is
playing, insert a tape in the player. If
a tape is in the player, press the
TAPE button. Press the CD button
again to switch back to the CD
player.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
To Change or Select Tracks
SKIP − Each time you press and
+ skip button, the player
release the ○
skips forward to the beginning of the
−
next track. Press and release the ○
skip button, to skip backward to the
beginning of the current track. Press
it again to skip to the beginning of
the previous track.
To move rapidly within a track, press
+ or ○
− skip button.
and hold the ○
REPEAT − To continuously replay
a track, press and release the RPT
button. You will see REPEAT in the
display. Press it again to turn it off.
Table of Contents
▼
Main Menu
▲
05/06/30 10:10:43 31S9A640 0116 Playing a Disc
RANDOM − This feature plays the
tracks in random order. To activate
random play, press and release the
RDM button. You will see RDM in
the display. Press it again to return
to normal play.
To Stop Playing a CD
Press the eject button (
) to
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 10 seconds and put it in
pause mode. To begin playing, press
the CD button.
If a tape is in the tape player, press
the TAPE button to switch to the
tape while a CD is playing. Press the
CD button again to switch back to
the CD player.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
you turn the system back on, the CD
will begin playing where it left off.
Protecting Discs
For information on how to handle
and protect discs, see page 134 .
Operating Optional CD Changer
An optional six disc CD changer is
available from your dealer.
This disc changer uses the same
controls used for the in-dash CD
player or the radio.
Load the desired CDs in the
magazine, and load the magazine in
the changer according to the
instructions that came with it.
To select the CD changer, press the
CD button. The CD and track
numbers will be displayed. To select
a different CD, use the preset 5
(DISC −) button to select the
previous disc, or the preset 6 (DISC
+) button to select the next disc in
sequence. If you select an empty slot
in the magazine, the changer will
search for the next available CD to
load and play.
111
Features
SCAN − The SCAN function
samples all the tracks on the disc in
the order they are recorded on the
CD. To activate it, press and hold the
SCAN button. You will see SCAN in
the display. You will get a 10 second
sampling of each track on the CD.
Press the SCAN button again to get
out of the system and play the last
track sampled.
Press the AM or FM button to
switch to the radio while a CD is
playing. To play the CD, press the
CD button.
Table of Contents
▲
Main Menu
▼
05/06/30 10:10:55 31S9A640 0117 Disc Player/Changer Error Messages
If you see an error message in the
display while playing a CD, find the
cause in the chart to the right. If you
cannot clear the error message, take
the vehicle to your dealer.
CD Player
Error
Message
Cause
Mechanical Error
High temperature
Focus Error
CD Changer
Error
Message
Cause
High temperature
No CD in magazine
Focus Error
Mechanical Error
112
Solution
Press the CD eject button and pull out the CD.
Check it for damage or deformation.
If the CD cannot be pulled out, or the error
message does not disappear after the CD is
ejected, see your dealer.
Will disappear when the temperature returns to
normal.
Press the eject button and pull out the CD.
Check if it is inserted correctly in the CD player.
Make sure the CD is not scratched or damaged.
Solution
Will disappear when the temperature returns to
normal.
Insert CDs in magazine.
Press the CD eject button and pull out the CDs.
Check for an error message, and insert the CDs
again. If the message does not disappear or the
CDs cannot be pulled out, see your dealer.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising