Copying EmbroideryEditor folder for a PC without a CD or DVD drive

Copying EmbroideryEditor folder for a PC without a CD or DVD drive
Instructions for Installing EmbroideryEditor
Copying EmbroideryEditor folder for a PC
without a CD or DVD drive
Computer System Requirements:
* OS: Windows 8.1 or 8 (32 or 64 bit) or
Windows 7 (32 or 64 bit) or
Windows Vista (32 or 64 bit)
* CPU: 800MHz minimum (1GHz recommended)
* Memory : 512MB minimum (1GB recommended)
* Hard Drive:50MB minimum free space
* Video Resolution: 800 x 600 minimum
(1024 x 768 recommended)
* CD or DVD drive
* USB cable and port
If your PC is not equipped with a CD or DVD drive, use an
external drive. Or using a PC with a CD or DVD drive, copy
the [EmbroideryEditor] folder on the CD-ROM and save it
on a USB flash drive with free space of not less than 50MB,
according to the following procedure.
1. Insert the [EmbroideryEditor] CD-ROM into the DVD drive of the PC.
2. Click the pop-up message shown below within 5 seconds, then click [Open folder to view files].
This process installs the following software:
1.EmbroideryEditor
2. USB Driver Installer (Jsmc864Installer)
* The following installation example uses a
Windows 8.1 OS.
* You need to log in as [Administrator].
* For instructions for EmbroideryEditor, see [Help].
* If the [AutoPlay] window is not shown:
For Windows 8.1:
2-1. Open [File Explorer] on Desktop > Click [This PC]
2-2. Right-click [DVD Drive] and click [Open AutoPlay...]
in the menu.
For Windows 8:
2-1. Open [File Explorer] on Desktop >Click [Computer]
2-2. Right-click [DVD Drive] and click [Open AutoPlay...]
in the menu.
For Windows 7 or Vista:
2-1. Select [Start] > click [Computer].
2-2. Right-click [DVD Drive] and click [Open AutoPlay] in
the menu.
3. Right-click the [EmbroideryEditor] folder in the CD-ROM
and click [Copy] in the menu.
4. Insert the USB flash drive into the PC.
5. Open the USB flash drive and right-click to select [Paste]
in the menu.
6. When the copy is saved on the USB flash drive, remove
it from the PC.
1
Installing EmbroideryEditor
3. The end user license agreement (EULA) will appear.
Read the EULA and check “I accept the terms in the
license agreement” if you agree. Click [Next].
1. Start up your PC and close all other applications before beginning installation.
Insert the [EmbroideryEditor] CD-ROM into the DVD drive.
Click the pop-up message shown below within 5 seconds,
then click [Run setup.exe].
4. Enter a user name and click [Next].
* If the [Auto Play] window is not shown, open [File Explorer]
on Desktop. Click [This PC] and double click
[EmbroideryEditor].
* For PCs without a CD or DVD drive, insert the USB flash drive into the PC. Open the [EmbroideryEditor] folder saved on the USB flash drive and double-click [setup].
* For tablet PCs, enter a user name with the touch keyboard (see the following instructions).
For Windows 8/8.1:
4-1. Tap the text box.
4-2. Tap the touch keyboard icon in the desktop taskbar to open the touch keyboard.
4-3. You can enter a user name using the touch keyboard.
For Windows 7:
4-1. Tap the text box to display the touch keyboard icon.
The icon is displayed for a few seconds.
2. The EmbroideryEditor InstallShield Wizard starts up
automatically.
Click [Next].
4-2. Tap the touch keyboard icon to open the touch keyboard.
4-3. You can enter a user name using the touch keyboard.
4-4. Tap the X button in the upper right corner of the touch keyboard to close it.
2
Preinstalling USB Driver
5. Click [Next] if you accept the [EmbroideryEditor]
installation location.
* Sample files are installed in the [EmbroideryEditor]
folder under the [Documents] folder.
Install the USB driver to transfer embroidery designs from
the PC to the sewing machine using the USB cable.
10. After EmbroideryEditor has been installed, the [User
Account Control] dialog box opens, click [Yes].
6. Click [Install] to start installation.
11. When the [Driver Package Installer] opens, click [Next].
7. [User Account Control] dialog box will open, click [Yes].
* Installation will take 1 – 2 minutes, depending on the
specifications of your PC.
12. When the [Windows Security] opens, click [Install].
13. When the USB Driver Installation is successfully
preinstalled, click [Finish].
8. When EmbroideryEditor is successfully installed, check
“Launch the USB driver installer” to install.
Click [Finish] to exit.
14. When connecting your PC to your Sewing machine for
the first time, [USB Driver] is installed automatically.
* Refer to the instruction book of the sewing machine for
how to connect the PC and the sewing machine.
* If installation of EmbroideryEditor is completed without
checking “Launch the USB driver installer”, please refer to
Page 4 for installing the USB driver.
9. The [EmbroideryEditor] icon appears on your desktop.
3
Installing the USB Driver
Installing Sample Data into Other Accounts
Windows 8.1:
1. Click the
button on the bottom left corner of the
screen to display the Start screen.
2. Click the
button on the bottom left corner of the start
screen to display the Apps view. The [EmbroideryEditor]
group is displayed in the Apps view.
Click the [Jsmc864Installer].
Sample data is installed only in [EmbroideryEditor] folder
under [Documents] of the account of a user who installed
[EmbroideryEditor]. Other users need to install the sample
data to one’s account.
If you use sample data, install using the following process.
1. Log in the PC under your account.
2. Insert the [EmbroideryEditor] CD-ROM into the DVD
drive and [Install Shield Wizard] starts automatically.
3. Click [Next].
3. Please follow the procedure 10 – 14 on Page 3.
Windows 8:
1. Move the cursor to the bottom left corner of the screen
to display the start menu thumbnail. Click the thumbnail
to display the start menu.
4. Select [Repair] and click [Next].
2. Right-click the bottom part of Start screen to display
the application bar.
5. Click [Install] and the sample data will be installed.
3. Click [All apps] on the application bar.
[EmbroideryEditor] group is displayed in the Apps view.
Click the [Jsmc864Installer].
4. Please follow the procedure 10 – 14 on Page 3.
6. Click [Finish] to complete installation.
Windows 7 / Windows Vista:
1. Click
on the bottom left corner of the screen and
select [All Programs].
2. Click the [EmbroideryEditor] folder to display the
[Jsmc864Installer]. Click the [Jsmc864Installer].
3. Please follow the procedure 10 – 14 on Page 3.
4
864-811-004 q (E)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising