PRODUCT SPECIFICATION video transmission TW3001AT Single-Channel Video Transmitter ACTIVE VIDEO TRANSMISSION OVER UNSHIELDED TWISTED PAIR Product Features • DIP Switch for Selecting Distance and Receiver Type • Full Motion Color/Black-White Video up to 3,000 ft (914.4 m) with a Passive Receiver and up to 5,000 ft (1,524 m) with an Active Receiver • Supports Coaxitron® Control (PTZ Control Signals) up to 750 ft (228.6 m) • Compatible with All Pelco Twisted Pair Equipped Cameras, Enclosures, and Domes • 120 VAC or 230 VAC Power Supply • Built-in Surge Suppression • Easy Termination with Removable UTP Connector • Supports NTSC, PAL, and SECAM • Brackets Allow Wall Mounting The TW3001AT is a single-channel active transmitter that can transmit live video over unshielded twisted pair (UTP) cable. Cat5e or Cat6 cable is recommended. The top of the unit has a DIP switch that allows you to select the distance (500-3,000 feet/152.4-914.4 meters) when using the transmitter with a passive receiver. The maximum distance when connecting a TW3001AT to a Pelco active receiver is set to 4,000 feet (1,219.2 meters) automatically. You can increase this distance to either 4,500 or 5,000 feet (1,371.6 or 1,524 meters) using the DIP switches. The fifth switch is for selecting receiver type (active or passive). For Coaxitron® control devices, 750 feet (228.6 meters) is the maximum distance over UTP. The TW3001AT allows for multiple applications. For example, you can connect it to a matrix switcher, such as the CM6800, using a Pelco passive transceiver. Pelco cameras connect to the BNC connector on the TW3001AT. Each transmitter has brackets attached to its sides for wall mounting. 120 VAC TO 24 VAC SPECTRA III DOME MONITOR KBD300A TW3001AT TW3001P CM6800 C1663 / REVISED 1-07 International Standards Organization Registered Firm; ISO 9001 Quality System TECHNICAL SPECIFICATIONS MODELS MECHANICAL TW3001AT TW3001AT-X Single-channel active transmitter; 120 VAC power supply Same as TW3001AT, except has a 230 VAC power supply Connectors BNC 2-Pin Connector (2.5 mm) 2-Pin Connector (3.5 mm) Switches 24 VAC, 50-60Hz 4.5 W Unshielded twisted pair (24 AWG maximum) Cat3 or better 5,000 ft (1,524 m) maximum with active receiver using Cat5e or Cat6 GENERAL ELECTRICAL Input Voltage Power Consumption Wire Type Wire Category Wire Distance Cable Type Distance (with Coaxitron) Distance with Passive Receivers (video only) Distance with Active Receivers (video only) Cat3e 750 ft (228.6 m) 1,500 ft (457.2 m) 2,500 ft (762 m) Cat5e 750 ft (228.6 m) 3,000 ft (914.4 m) 5,000 ft (1,524 m) Cat5e 750 ft (228.6 m) 3,000 ft (914.4 m) 5,000 ft (1,524 m) Cat6e 750 ft (228.6 m) 3,000 ft (914.4 m) 5,000 ft (1,524 m) DC Loop Resistance Differential Capacitance Transient Immunity Construction Finish Operating Temperature Relative Humidity Data Transmission LED Indicator Dimensions Unit Weight Shipping Weight 1 BNC UTP input/output Power One DIP switch Steel Metallic gray 32° to 167° F (0° to 75° C) 0 to 90%, noncondensing Supports Coaxitron up to 750 ft (228.6 m) Green power LED 2.25" D x 3.00" W x 1.12" H (5.72 x 7.62 x 2.84 cm) 0.30 lb (0.14 kg) 2 lb (0.91 kg) CERTIFICATIONS • • • • CE, Class B UL Listed UL Listed to Canadian safety standards FCC, Class B 52 ohms per 1,000 ft (304.8 m) 19pF/ft max 300 W peak pulse power (8/20 US) VIDEO CHARACTERISTICS Video Output Format Frequency Response Common Mode/Differential Mode Rejection One BNC NTSC, PAL, SECAM DC to 10 MHz >70 dB Pelco, Inc. Worldwide Headquarters: 3500 Pelco Way, Clovis, California 93612-5699 USA USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150 International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120 www.pelco.com Pelco, the Pelco logo, and Coaxitron are registered trademarks of Pelco, Inc. Product specifications and availability subject to change without notice. ©Copyright 2007, Pelco, Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project