7 security - TOA Canada
PTZ Combination Dome Cameras
Vandalproof Cameras
A
Box Cameras
SECURITY
PRODUCTS
TOA TN
Digital Video Recorders
Multiplexers
Coaxial Transmission Systems
CRT 8: LCD Monitors
Network Intercom Systems
Security Intercom Systems
TOA 800.733.7088 * www.toaelec{432; 43 41
TOA
Dedicated to Security and Safety.
A global security solutions leader for over 20 years, TOA has developed cutting
edge technologies: IP network-ready cameras, digital video recorders and intercom
systems — plus break-through Wide Dynamic Range cameras for clear, crisp images
in adverse lighting conditions. With today’s increased demands for enhanced
security and safety, TOA strives to continually develop advanced technologies to
help serve the needs of society. Our full line of security products also includes:
Pan-Tilt-Zoom combination dome cameras, compact box and mini-dome cameras,
monitors, and much more. These innovative products can be used in a wide range
of applications requiring high quality video surveillance. TOA’s “installer-friendly”
products help reduce installation time and increase your profit margins for every
CCTV job. With industry-leading warranty coverage, comprehensive design
resources and free technical support, you can rely on TOA for high-performance,
cost-effective video surveillance and intercom solutions!
Digital Video Recorders
PTZ Combination
Dome Cameras
Wide Dynamic Range
Box Camera
Compact Box Cameras
Mini-Dome Cameras
Vandal Resistant
Day/Night Camera
IP Network Camera System
Multiplexers
Switchers, Video Distributor,
and Coaxial Transmission System
LCD and CRT Monitors
Brackets, Plugs, Cables and
Lenses
IP Network
Intercom System
Voice Security
Intercom System
Network Audio Adapter
Resources
page 2-5
page 6-9
page 10
page 11
page 11
page 12
page 13-14
page 15
page 16
page 17
page 18
page 19 - 21
page 22 - 23
page 24
inside back cover
Digital Video Recorders
C-DR161D08
(HDD 80GB with DVD)
C-DR161D1
(HDD 160GB with DVD)
C-DR161D3
(HDD 320GB with DVD)
C-DR161D6
(HDD 600GB with DVD)
16-Channel Digital Video Recorders
C-DR161-08
(HDD 80GB)
C-DR161-1
(HDD 160GB)
C-DR161-3
(HDD 320GB)
C-DR161-6
(HDD 600GB)
C-DR091D08
(HDD 80GB with DVD)
C-DR091D1
(HDD 160GB with DVD)
C-DR091D3
(HDD 320GB with DVD)
C-DR091D6
(HDD 600GB with DVD)
9-Channel Digital Video Recorders
C-DR091-08
(HDD 80GB)
C-DR091-1
(HDD 160GB)
C-DR091-3
(HDD 320GB)
C-DR091-6
(HDD 600GB)
The TOA C-DR161/091 Series is made up of 16 DVR
(digital video recorder) units, offering a wide range of
video input, HDD storage and DVD burning capabilities.
Up to eight DVR units can be linked in cascade
configurations to form a large-scale system with a
maximum of 128 cameras connected.
By linking as many as four C-RM1000 remote control
units, a sophisticated zone-based security system can be
configured.
Operational efficiency and economy are greatly enhanced
because there is no need for additional special equipment.
A network can be set up for live surveillance and playback,
with web browser control, and email transmission to report
alarm.
A high quality picture of 720 x 240 pixels and high frame
rate of 120 IPS (Images Per Second) are provided. Each
camera can have individual recording rate and picture
quality settings.
There is a wide selection of recording and search modes,
as well as backup to a DVD-R or external USB memory.
PC viewer software is also automatically created.
Password and USB key corresponding to the operation
level protects the DVR system from unauthorized access.
! Extensive range of products in the series satisfy any demand.
TOA's latest DVR products are the C-DR161/091 Series. This
series is composed of 16 units which feature different video
input capabilities, HDD storage capacities, and optional DVD
burner. These products can be partnered with a range of
peripherals including the C-RM1000 dedicated remote
controller and two external HDD expansion units in order to
configure systems that can fulfill the needs of many specific
applications.
Versatile system expansion possibilities
for fulfilling specific requirements.
Utilizing the new DVR C-DR161/091 Series makes it possible
to assemble large-scale systems using up to eight DVR units in
cascade configuration. Each DVR unit can have two external
HDD expansion units and the system can be efficiently
operated using up to a maximum of 4 remote controllers. Such
large systems allow connecting up to 128 cameras with HDD
expanded externally by up to 4.8TB per DVR unit. Configuring
systems as needed can be performed efficiently as well as
economically as special or dedicated devices are not required.
Remote control capabilities via network
enhance system performance.
Each DVR from the C-DR161/091 Series offers remote
surveillance, search and playback of recorded images via a
10/100 BASE-T network. Remote surveillance can be
performed just with unit controls without dedicated software
and control can be performed via a web browser such as
Internet Explorer. In addition, there is an e-mail transmission
function to report alarm.
I High quality picture with high frame rate.
TOA DVRs feature a maximum high frame rate of 120 IPS for
image recording with a high quality picture of 720 x 240 pixels.
Each camera in a system can have individual settings for
recording rate and picture quality which in turn enable setting
priority recording.
à Multiple search modes for quicker results.
Searching recorded data is easy as various data search
modes are offered: Time/day search and Event search (priority
recording, timer recording, alarm recording, motion detection
recording). This versatility makes it possible to select an
optimal search method for particular requirements.
Backing up data with dedicated viewer
software.
Recorded data can be backed up to the built-in DVD-R drive or
external USB memory. Whenever a backup copy is made,
viewer software that allows image viewing on a PC is also
copied to the backup medium.
4 Secure measures protect system.
System security is also provided by a user log-in password
corresponding to the operation level and USB-based protection
that “locks” the unit, preventing operation or any changing to the
settings unless a registered USB memory key is used. To
safeguard recorded images, the DVRs are supplied with
software that will detect images that have been altered.
à Wide selection of recording modes.
Recording modes are Priority recording, Auto recording (Alarm
event/Normal), Pre-recording.
! Accurate time synchronizing.
Recording time data is absolutely essential for the integrity of
the recorded images, so the new DVR units include an NTP
server-based time correction function. Time correction can also
be accessed for TOA combination cameras that are connected
to the DVR.
Full-featured remote controller assists
operation.
The C-RM1000 remote controller can control the new C-DR161/091
Series DVR's in addition to TOA combination dome cameras
via the DVR. A single remote controller can control up to
eight DVR units and when the maximum eight DVRs are
cascaded, controlling 128 combination dome cameras becomes
possible.
Grouping maximizes surveillance
efficiency.
Effective surveillance is accomplished by dividing surveillance
into multiple zones for security purposes, and this is desirable
for many sites including factories, commercial facilities, schools
and buildings. The new DVR also makes it possible to group
using the C-RM1000 remote controller, helping to easily
configure optimal, sophisticated systems.
Digital Video Recorders
C-RM1000
Remote Control Unit
The C-RM1000 Remote Controller is used to remotely control
the 9-CH/16-CH Digital Video Recorder (C-DR161/091
Series). It can also control combination cameras connected
to the Digital Video Recorder. A-built in 3-axis joystick allows
main operations to be performed with one hand.
C-RF1000
Interface Unit
The C-RF1000 Interface Unit is used to operate the 9-CH/
16CH Digital Video Recorder (C-DRO91/161 Series) with
multiple remote controllers (up to 4 remote controllers can be
connected). Equipped with an RS-232C terminal, the
C-RF1000 can connect to a PC.
C-DA1000-1 (1.2TB)
C-DA1000-2 (2.4TB)
Hard Disk Expansion Unit
The C-DA1000 Series are hard disk units used to expand
recording capacity of 9CH/16CH Digital Video Recorder
(C-DR091/161 Series). Up to two units per DVR can be
connected.
"Digital Video Recorder Control
Digital Video Recorder's recording and playback operation
can be remotely controlled by the Remote Controller. It is also
possible to display the Digital Video Recorder's menu to
change settings.
Screen Display Operation
Camera images can be viewed in full-screen, 4-segment,
9-segment, or 16-segment split screen displays or in
sequential displays. (Monitor 2 output can provide only full-
screen, 4-segment split screen, and sequential displays.)
Combination Dome Camera Operation
The Combination Dome Camera's pan, tilt, and zoom
operation, as well as focus and iris adjustments can be
remotely controlled. It is also possible to display the
Combination Dome Camera's menu to change settings.
Preset Position Programming and Playback
The Combination Dome Camera's preset positions can be
easily programmed. Images set to the preset position can also
be displayed on the monitor screen.
"Quick Display Function
Digital video recorder numbers, camera numbers, and position
numbers can be programmed into a function key (F1 — F4) or
number (1 — 508). Pressing the programmed key or number
permits the corresponding camera image to be displayed on
the full screen.
{Function Programming
Functions, such as Auto-focus, Auto operation, and electronic
zoom, can be programmed into a function key (F1 — F4) or
number (1 — 508).
{Digital Video Recorder Grouping
Two or more cascade-connected Digital Video Recorders can
be grouped, allowing images of all Digital Video Recorders in
the group to be displayed on one master monitor. Further,
multiple Digital Video Recorders can be viewed in sequential
order through group sequence.
Password Setting
Accessible functions can be restricted by setting a password.
There are 3 operation levels and different passwords can be
set for each level.
“Monitor Locking
Operations of the Digital Video Recorder's Monitor Outputs 1
and 2 can be individually restricted. This function is convenient
if two or more Remote Controllers are connected in the system.
1 Web Functions
The Digital Video Recorder is equipped with a variety of web-accessible functions.
Connecting to the unit using a PC over a LAN cable allows the video recorder
to remotely monitor camera outputs, or to search and/or play back recorded
images using a web browser. The following specific functions can be accessed on
a connected PC using the web interface:
* Simultaneous operation of 3 client PCs
* Viewing of live images
Control of combination dome cameras
« Search and/or playback of recorded images
* Operation duplicating that of the keys mounted
on the Digital Video Recorder's front panel
r
E
r ! + НН ый | =
7
=
A
if |
i
|
|
» Reference to and changing of menu settings
* Downloading of recorded images
Basic System
Expanded System
1 System Requirements
PC
OS: Windows 2000/XP
CPU: Celeron, 600 MHz or more
Memory: 64 MB of more
Available HDD space: No limit
шо т) Browser
H x) 4 Internet Explorer 5.5 or later
EJ DE | Java
=— Sun JRE 1.4 or later
ame
Camera Control Section
Visit www.toaelectronics.com
to download an MS Excel
DVR Storage Calculator.
:
&
“ E
video
C-DR091 C-DR161 Series
ta
Output 1
=" (BNC)
ce =. нов = = =
Remote Controller
6 C-DRO91 C-DR161 Series
В = — = — = = — ==
Interface unit
C-AF1000
PTZ Combination Dome Cameras
BE FEATURES
! Higher resolution delivers superior images.
* Horizontal resolution of 540 lines. (C-CC774/574)
I All points coverage at high speed.
+ 360° rotating range.
E Expanded zooming ability.
*35X optical zoom lens (C-CC774/574).
! Electronic Image Stabilizer (C-CC774/574).
! Intelligent image optimizing using the Wide
Dynamic Range function. C-CC774 OUTDOOR USE
| Sophisticated autofocus modes add versatility. = 255 preset positions + Home position
* Three auto focus modes. + 420X zoom (optical 35X, electronic 12X)
* Electronic Image Stabilizer
1 Motion detection function initiates operation.* „ИК rotatlon range 6 16 168 (asia AiG: Eie fection)
8 motion detection area. « Pan rotation range continuous 360°
# Color image clarity maintained with sensitivity * Pan/tilt maximum rotating speed is 360"/sec
boost « 1/4 type CCD image device
Е * 540 lines high resolution
sMaxmum 32 times. + Wide dynamic range
# Day/Night operation improves low light * Autofocus
performance.* * High-sensitivity function (color and B/W modes)
s Automatic B/W mode Sr TeDe Serena nt
í = Privacy masking function
À Protecting privacy. « Restricting camera movement
*Privacy Masking function (maximum 8 areas).* * Auto-trace function
«Restricting camera movement. Antes
1 Outdoor installation ready (C-CC774/764/714). * Auto-pan function
* Meets IP66 standards. * Preset image freeze function
; *D Protection: |
I Withstands cold weather conditions E e as
(C-CC774/764/714).
= Operating temperature —40°C to +50°C.
I Route tracing facilitates subject monitoring. INDOOR USE
«Up to 60 seconds (two routes).
# Configuring programmable tours. Multi-function
*Up to 16 tour patterns.
1 Programmable camera operation initiated by
alarm input.
! Preset operation start with Timer program function.
1 Software for maintenance.
© Flexible installation options. =
Ai > with Ceiling Mount
! Titling options. Cover C-BC511C
1 Other functions.
» Tilt (vertical) range: +5° to —185°.* C-CC574 INDOOR USE
= Auto flip function®, * 255 preset positions + Home position
* Rotation speed can be varied to match lens zooming ratio in * 420X zoom (optical 35X, electronic 12X)
manual operation mode. * Electronic Image Stabilizer
«Freeze preset function® * Tilt rotation range +5" to -185" (using Auto-Flip function)
* Pan rotation range continuous 360°
*Flicker-free operation. « Pan/tilt maximum rotating speed Is 360°/sec
« Alarm input and auxiliary contact output. * 1/4 type CCD image device
*RS-485 protocol control. « 540 lines high resolution
« Wide dynamic range
*C-CC774/764/574/564 only. * Autofocus
* High-sensitivity function (color and B/W modes)
* Preset sequency function
* Privacy masking function
* Restricting camera movement
* Auto-trace function
* Auto-tour function
» Motion detection function
* Auto-pan function
* Preset image freeze function
6 * AS-485 multi-protocol compatible
C-CC764 OUTDOOR USE
= 255 preset positions + Home position
* 276X zoom (optical 23X, electronic 12X)
* Tilt rotation range +5" to -185" (using Auto-Flip function)
* Pan rotation range continuous 360"
* Pan/tiit maximum rotating speed is 360°/sec
* 1/4 type CCD image device
« 480 lines high resolution
* Wide dynamic range
*» Autofocus
» High-sensitivity function (color and B/W modes)
+ Preset sequency function
* Privacy masking function
* Restricting camera movement
« Auto-trace function
* Auto-tour function
« Motion detection function
* Auto-pan function
* Preset image freeze function
* DustWater Protection: IP66
= RS-485 multi-protocol compatible
Multi-function
with Ceiling Mount
Cover C-BCS110
C-CC564 INDOOR USE
* 255 preset positions + Home position
» 276X zoom (optical 23X, electronic 12X)
* Tilt rotation range +5° to -185° (using Auto-Flip function)
* Pan rotation range continuous 360°
+ Pan/tilt maximum rotating speed is 360"/sec
* 1/4 type CCD image device
« 480 lines high resolution
« Wide dynamic range
= Autofocus
* High-sensitivity function (color and B/W modes)
» Preset sequency function
* Privacy masking function
« Restricting camera movement
« Auto-trace function
* Auto-tour function
* Motion detection function
* Auto-pan function
* Preset image freeze function
* RS-485 multi-protocol compatible
C-CC714 OUTDOOR USE
* 255 preset positions + Home position
* 264X zoom (optical 22X, electronic 12X)
« Tilt rotation range +5” to -90°
* Pan rotation range continuous 360°
« Pan/tiit maximum rotating speed is 360°/sec
* 1/4 type CCD image device
« 480 lines high resolution
* Autofocus
* High-sensitivity function (color mode)
* Preset sequency function
* Restricting camera movement
* Auto-trace function
* Auto-tour function
« Auto-pan function
« Dust/Water Protection: IP66
* RS-485 multi-protocol compatible
with Ceiling Mount
Cover C-BC511C
C-CC514 INDOOR USE
» 255 preset positions + Home position
» 264X zoom (optical 22X, electronic 12X)
+ Tilt rotation range +5° to -90°
* Pan rotation range continuous 360°
* Pan/tilt maximum rotating speed is 360°/sec
* 1/4 type CCD image device
= 480 lines high resolution
= Autofocus
» High-sensitivity function (color mode)
* Preset sequency function
» Restricting camera movement
* Auto-trace function
* Auto-tour function
* Auto-pan function
* RS-485 multi-protocol compatible
PTZ Combination Dome Cameras
For C-CC774/C-CC764/C-CC714 (Outdoor use
13
C-BC711P
Ceiling Suspension
Bracket
The C-BC711P is designed to be
used to suspend TOA's outdoor
combination camera from a
ceiling or eaves,
PABOSF
Pendant mount coupling adapter,
1.5" female pipe threads, aluminum,
white powder coat finish.
For C-CC574/C-CC564/C-CC514 (Indoor use
|;
C-BC711PM
Pole Mounting Bracket
Using the optional YS5-60B and
C-BC711W, the C-BC711PM can
mount the outdoor combination
camera on a pole.
PWM30G/GPC
Parapet mount bracket, w/extension
piece, aluminum, 1.5" male pipe threads,
white powder coat finish, also requires
PABOSF adapter.
C-BC711W
Wall Mounting Bracket
The C-BC711W is designed to be
used to mount TOA's outdoor
combination camera on a wall,
Q-C-BC711C
Corner mount bracket
C-A711DM
Smoked Dome Cover
The C-A711DM Smoked Dome Cover
is designed to be used in conjunction
with TOA's Combination Cameras.
The smoked dome prevents individuals
from seeing the camera's orientation.
C-BC511C
Ceiling Mount Cover
The C-BC511C is a camera
installation cover designed solely for
mounting TOA's Combination
Cameras. The cover is used when
mounting the Combination camera
directly to a ceiling or wall or
suspending it from the ceiling.
A
/
C-BC511W
Wall Mounting Bracket
The C-BC511W Wall Mounting
Bracket is specially designéd to
mount TOA's Combination Cameras
to wall surfaces. Install the unit only
in à location that can structurally
support weight of the unit and
camera.
C-BC511C-S
Ceiling Mount
Cover (Smoked)
The C-BC511C-5 is a camera
installation cover designed solely for
mounting TOA's Combination
Cameras. The cover is used when
mounting the Combination camera
directly to a ceiling or wall or
suspending it from the ceiling. The
smoked dome prevents individuals
from seeing the camera's orientation.
C-BC511P
Ceiling Suspension
Bracket
The C-BC511P is a Celling
Suspension Bracket designed solely
for suspending TOA's Combination
Cameras from the ceiling.
C-BC511U
Flush Ceiling
Mounting Bracket
The C-BC511U bracket is designed
to be exclusively used for flush
ceiling mounting of TOA's
combination camera. Use this
bracket when mounting the camera
to the ceiling surface where the fixing
screws cannot be securely installed,
such as on the plaster panel of the
dual-construction ceiling.
C-BC511A
Anchor Bracket
The C-BCS11A Is specially designed
to mount TOA's Combination
Cameras directly on the ceiling. The
bracket facilitates mounting of the
camera on the plasterboard in the
double ceiling or other locations
where the mounting screws cannot
be installed securely.
\
C-BC511U-S
Flush Ceiling Mounting
Bracket (Smoked)
The C-BC511U-S bracket is designed
to be exclusively used for flush
ceiling mounting of TOA's
combination camera. Use this
bracket when mounting the camera
to the ceiling surface where the fixing
screws cannot be securely installed,
such as on the plaster panel of the
dual-construction ceiling. The smoked
dome prevents individuals from seeing
the camera's orientation.
Q-C-BC511E
Pendant adapter, required for indoor
combination dome pipe mounting, also
requires PABOSF adapter,
PABOSF
Pendant mount coupling adapter,
1.5" female pipe threads, aluminum,
white powder coat finish.
— lr
==” =
же if
E ==? “=
р = CF a
\ ==!
C-RM500 на
Remote Controller
oo e
Za a
5 ., —
The C-RM500 Remote Controller is designed for use in camera-based
systems that allow remote control from up to 1.2km away over R5-485
communication lines. It allows video images to be switched remotely and
supports a maximum of 16 TOA Combination Dome Cameras when
used together with the TOA Mulliplexer. Easy-to-see LEDs inform status of
control, alarm, focus and other functions.
Power Source: 12V DC.
C-AL80 Alarm Unit
The C-AL80 Alarm Unit serves as the main controller for the alarm
requirements of a system by converting alarm signals initiated by
externally connected equipment into R5-232C-compatible signal data.
In addition to its 32 alarm or remote inputs, the C-AL80 can also be
linked to a maximum of 8 other C-AL80 units in master/slave
configurations. This provides a total of 256 alarm or remote inputs to
be transmitted to the C-RM500 remote controller.
Power Source: 230V AC.
Combination Dome Camera Comparison Table
Application
Water Dust Protection
Operating Temperature
Auto Iris Lens Zoom Ratio
Focal Length (f =)
Electronic Zoom Ratio
Image Device
Horizontal Resolution (at Center)
Minimum Required Mumination
J50mv
40m
High Sensitivity ON 350mV
High Sensitivity ON 140mV
Number of Preset Positions
Zoom Speed (WIDE end to TELE end)
Preset Opearaition
Manual Operation
Rotating Range Panning
Tilting
Rotating Speed
Electronic Image Stabilizer
Wide Dynamic Range
Back Light Compensation
White Balance
Sensitivity Up (Color mode)
DayNight operation (BAY mode)
Motion Detection
Privacy Masking
Alarm Input
Power Source
C-CCT74
Outdoor
IP66
40°C to +50°C
35x
3.4 - 119.0 mm
12%
1/4 CCD
540 line
1х
03x
0.006 Ix
0.0015 kx
255+ Home
ZU SEC.
З.2 вес.
360° endless
+57 to —185°
SEU Sen
5
%
E
ATW/AWB
Max. 32 times
E”
®
® Max 8 area
Up to 4/5creen
3
24М АС
C-CC764
Outdoor
IP66
40°C to +50°C
23x
36-828 mm
12X
1/4 CCD
480 line
3x
1 lx
0.03 Ix
0.01 Ix
2554 Home
1.5 sac
2.9 sec.
360" endless
+5° to—185°
JEL SE
*
®
ATW AWE
Máx. 32 times
@
o
® Max 8 area
Up to 2/Screen
3
24V AC
C-IF500 Interface Unit
À useful option for configuring camera systems, the C-IF500 functions
as a splitter. It provides control over expanding a camera system when
the distance is over 1.2km (max. 3km) between the dedicated
C-RM500 Remote Controller and system cameras linked to it. It will
also allow configuring a star connection. Receiving the R5-485
communication line senal signals, the C-IFS00 splits the signals into
4-channel data for slave units and converts into RS-232C data to be
used for public line or fiber optics communication, Data communi-
cation between master and slave terminals is bidirectional. The
C-IF500 also allows easily setting the data communication data transfer
rate in four increments via DIP switch to suit network requirements.
Power source: 12V DC,
st...
C-CCT14
Outdoor
\P66
-40°C to +50°C
22%
4.0 = 58.0 mm
12%
1/4 CCD
480 line
Tx
0.3 Ix
0.03 1x
0.01 Ix
2554 Home
1.2 sec
2.4 sec.
360" endiess
+5° to-90°
360 /58c.
a
ATW/AWE
Max, 32 mes
3
24М АС
System Example
E i ‘Combination
Dome Cameras
C-CC574
Indoor
—-10°C to +50°C
35x
3.4 -119.0 mm
12%
1/4 CCD
540 line
1 lx
ОЗ
0.005 Lx
0.0015 Ix
255+ Home
2.0 sec
3.2 sec.
360° endless
+5° 10 -185°
360° sec.
.
LJ
®
ATW/AWEB
Max. 32 times
®
.
® Max 8 area
Up to 4/Screen
8
24М АС
C-CCS64
Indoor
—10"C to +50°C
23%
36 — 5.0 mm
12%
1/4 CCD
480 line
à Ix
1 ix
0.03 Ix
0.01 Ix
255+Home
1.5 580
2.9 sec.
360" endless
+5° to —185°
360% sac
L
.
ATW/AWE
Max. 32 times
5
.
® Max 8 area
Up to 2/Screen
5
24V AC
“10°C to +50°C
22%
4.0 — 88.0 mm
12%
1/4 CCD
480 line
11x
оз
0.03 Ix
0.01 Ix
255+ Home
1.3586.
2.4 вес.
360" endless
+5* to -90%
36 /sec
o
ATW AWE
Max, 32 times
24V AC
10
Wide Dynamic Range Color Camera
EE FEATURES
© New Wide Dynamic Range
Provides a new level of performance with natural
looking images even in backlight condition.
* 500-line high resolution
© Minimum required illumination level of as low
as 0.5 Ix (350mV)
| Day/Night operation
Clear images are provided even in unsatisfactory light by
B/W mode.
1 Maximum 64X sensitivity booster
Enables increasing sensitivity to take color images
even in night conditions.
" Privacy masking function
Allows privacy protection for up to 4 locations.
* Can be controlled from a distant location
Using the C-RU10 Remote Control Interface allows
convenient control of camera parameters.
| Backlight compensation
Allows optimal viewing of dark areas in a backlight condition.
! Newly developed DSP
| Easy focusing without using the ND filter
© Alarm input
© Motion detection
* Fully automatic operation mode shift
1 Easy menu-driven setup
à 2X Electric Zoom
1 Screen Reverse function (Horizontal/Vertical)
1 Optional Outdoor Housing
Model ACH13HBWM (aluminum body, clear window, hinged,
flip-top opening plus metal wall mount, and 24V AC heater/
blower/thermostat)
TOA Wide Dynamic Range Method
Conventional cameras employ a single speed of 1/50sec.
when taking images. TOA's Wide Dynamic Range Method
makes use of two shutter speeds, one set at 1/100sec. and
one that is variable from 1/100sec. to 1/10500sec. to take
two images which are electronically combined to produce a
single, high-quality image.
time
Conventional Method TOA Wide Dynamic Method
| о
3 8
a a - vanaßıle
0 OO
о Li
time
© | high-speed shutter | low-speed shutter
(1/100sec to 110500582)
1/1005яс 1/100sec
се —
So E
TOA
у
C-CC364 (Lens is optional)
Wide Dynamic Range Color Camera
C-RU10
Remote Control interface
Camera function settings, and color and brightness adjustments can be
remotely controlled with ease by connecting the C-RU10 to the C-CC364
camera. The C-RU10 permits control signals to be superimposed over
the camera video signal by connecting cameras with a single coaxial
cable, and motion detection or alarm signals from the camera to be
received. With the use of an optional rack mounting bracket, it can be
mounted in an EIA Standard equipment rack (1 unit size).
Power source: 220 — 240V AC.
ps TT
a Е
Ta
AY
Electronically combining the images taken using both low-speed and
high-speed shutter gives single clear image.
Compact Box and
Mini-Dome Cameras
BEE FEATURES
I Easy power requirements
TOA compact color cameras operate on
24V AC or 12V DC.
" High-performance CCDs
Each camera incorporates a 1/4" CCD
with a resolution of 440,000 pixels
resulting a high horizontal resolution that
exceeds 470 lines.
© 2X varifocal lens
To easily allow on-site adjustment for the
viewing angle, each camera is fitted with a
2X manual varifocal lens having an auto iris.
1 Wide-ranging view angles
Optimal camera angle of view extends
from 53.2 to a wide 105.1 degrees,
enhancing coverage over a wide range
for more effective monitoring (C-CV14-2
and C-CV24-2).
© Backlight compensation
To cope with varying lighting conditions,
backlight compensation can be switched
on or off as required.
1 Flicker-free for easier viewing
The cameras do not cause the image to
deteriorate as often caused by fluorescent
lighting. Annoying image flicker is
eliminated for more effective monitoring.
! Focus adjustment switch for
easy focusing
To simplify focusing even without using the
ND filter, an adjustment switch is provided
for foolproof focusing.
C-CV14-CS
Indoor Color Box Camera
* Indoor color camera
* Requires CS-compatible lens
* Auto-iris
= 1/4 in. CCD, 480 TVL
« Backlight compensation
«24V AC or 12V DC
a E - =
C-CV14-2
Indoor Color Integrated Camera
* Indoor color camera
« 2.0 to 4.0mm
= Varifocal
* Auto-iris
= 1/4 in. CCD, 480 TVL
+ Backlight compensation
= 24V AC or 12V DC
Indoor Color Box Camera
* Requires CS-compatible lens
« 1/4 in. CCD, 480 TVL
* Backlight compensation
* 12\ ОС
C-CV24-2
Indoor Mini-dome Color Camera
- 2.0 to 4.0mm Varifocal
* Auto-iris
* 1/4 in. CCD, 480 TVL
= Backlight compensation
* Monitor output
« Wide camera lens angle setting
* 3-axis adjustment
= 24V AC or 12V DC
C-CV44-3
Outdoor Color Integrated Camera
= 3.0 to 6.0mm
= Varifocal
* Auto-iris
= 1/4 in. CCD, 480 TVL
* Backlight compensation
« 24V AC or 12V DC
« Water-resistant construction (IP-66)
C-CV202-3
C-CV202-F3
Indoor Mini-dome Color Camera
= 2.8 to 5.8mm varifocal auto-iris lens
(C-CV202-3)
= Built-in fixed focus, fixed-iris lens
(C-CV202-F3)
= Auto-iris
* 1/4 in. CCD, 480 TVL
= Backlight compensation
* Monitor output
+» 2-axis adjustment
=12V DC
11
Vandal Resistant Day/Night Camera
BEEN FEATURES
" High resolution (horizontal: 500 lines)
* 1/3" CCD with a resolution of 380,000 pixels
1 High sensitivity
*0.5Ix in color mode and 0.05Ix in B/W mode, with
electronic sensitivity boost of up to 4X
! Day/Night operation
Clear monochrome image is provided even under
poor lighting conditions.
I Backlight compensation
*» Allows optimal viewing of dark areas in a backlight condition.
I Easy viewing
* Flicker-free function
* Noise reduction function
1 Dust- and water-proof construction (IP66)
1 Tamper-proof, sturdy design
* Impact-resistance against 50-joule energy
“ Wide range of view angles (3X varifocal lens)
* Horizontal: 90.3” — 31.9”, Vertical: 66.4” — 23.9”,
Diagonal: 115.4° — 39.8"
1 Easy installation
* 3-axis (horizontal, vertical and rotational) adjustment mechanism
* Direct output to the monitor
I Easy focusing without requiring an ND filter*
I Flexible camera power source
+ Compatible with 24V AC or 12V DC
# Operating temperature of as low as —30°C
* With optional heater unit C-A854H
12
C-CV854D-3 INDOOR/OUTDOOR USE
Vandal Resistant Day/Night Camera
(3X varifocal lens)
C-A854H
Heater Unit
The C-AB54H heater unit is designed to be used
in conjunction with the C-CVB54D-3 Vandal
resistant day/night camera,
Installing this heater unit in the camera allows the
camera to be used in locations exposed to
extremely low ambient temperatures.
IP Network Camera System
N-CC2360 Network Color Camera
+ High-performance model allows mounting a
CS lens and includes Wide Dynamic Range
and Day & Night functions.
« PoE capability simplifies connectivity requiring
just a single LAN cable. 24V AC or 24V DC
operation is possible.
* The built-in microphone and audio output
terminal allows bidirectional audio
transmission.
= Analog signal output terminal for
connecting a monitor display.
= Contact output x 2; Contact input x 2
y
РР.
a" ===
A
== leve
“а bi TS a
=
N-VR2010 Network Video Receiver
* Allows displaying digital image data from a
network camera or network video transmitter
on an analog monitor screen.
« Bi-directional audio transmission
(Mic/Line input x 1; Line output x 1)
* PoE capability simplifies connectivity requiring
just a single LAN cable. 24V AC or 24V DC
operation is possible.
» AS-232C x 1; RS-485 x 1 for remote
controller
= Contact input x 2; Contact output = 2
« Power supply (12V DC)
remote control systems.
* Able to simultaneously control devices and transmit
audio bidirectionally together with images,
minimizing cable use.
= Utilizing more cameras allows further reducing cable
use and freeing up space that cable installations
would require.
EEE Product Lineup
+7
к
чо
with Ceiling Mount
Cover C-BC511C
Network Combination
N-CC2564 Dome Camera
+ All-in-one model equipped with 23X optical
and 12X electronic zooms, capable of 255
preset camera positions.
« Rotation range: horizontal 360° continuous;
vertical +5" to 185”.
* High-speed horizontal and vertical rotations of
up to 360° /sec,
+ Maximum of 8 locations can be designated for
privacy masking.
« Protocol for absolute coordinate designation.
= Bi-directional audio transmission
(line input <1; line output x 1)
= Alarm input x 8; Auxiliary contact output x 2
* Power source: 24V AC
N-DR2000 Network Video Recorder
* Ongoing digital images (JPEG formats) and
audio (Sub-band ADPCM, PCM) are recorded,
« Simultaneous recording of data from up to 16
cameras and transmitters. (playback up to 8
recorded data)
* Recorded data is converted into a database to
allow high-speed searching and viewing.
* Search modes: day/time, block, search fine-tuning
alarm, motion detection.
= Distributing recorded data to multiple locations
* Web, FTP NTP SMTP (mail) and DHCP
server capabilities
* Browser-based setup
= System-wide time synchronization by NTP server
* Highly reliable Linux OS.
» HDD 640GB (320GB x 2)
Ner{Zansee
2; = =
e
ET ет E “me
ag
N-VT2010 Network Video Transmitter
* Connection for analog camera to digitally
transmit images to a network.
= Bidirectional audio transmission
(Mic/Line input x 1; Line output x 1)
* PoE capability simplifies connectivity requiring
just a single LAN cable. 24V AC or 24V DC
operation is possible.
« RS-232C x 1: RS-485 x 1 for remoted control
of combination dome camera.
= Contact input x 2; Contact output x 2
* Power supply for CV Series camera (12V DC)
N-SD2000 software Decoder
* Detects NetCanSee devices on a network.
+ Single view and quad view image of MPEG-4
in real time.
« Bidirectional audio transmission.
« Search and playback of images and
bidirectional audio recorded by the Network
Video Recorder(N-DR2000).
* Control of external devices
Combination camera (C-CC564/764 Series)
Multiplexer (C-MS91D/161D Series)
Contact output control
HEE Network-based system advantages
» Facilitates configuring remote surveillance and * Total system versatility for system expansion,
adaptability and flexibility.
* No image degradation or audio deterioration because
transmission is digital.
* High quality regardless of TV signal types.
* Allows integration into other systems such as IP
intercom systems.
IP Network Camera System
EES FEATURES NerÇansee
I Transmits MPEG-4 and JPEG simultaneously
(dual stream).
» Monitors with smooth-movement images and records high-quality
still images.
* Image output sizes and frame rates can be varied as required to
satisfy bandwidth limitations of LAN and WAN networks.
“ Utilizes MPEG-4ASP (Advanced Simple Profile)
» Accommodates transmission rates ranging from 16 kbps to 4Mbps. Transmission of MPEG-4 and JPEG simultaneously
= Can transmit D1-size (720 x 576) image output at 25 fps, with — т
image quality better than using MPEG-2 CODEC (if same Perform vena su by means of a
transmission speed is maintained.) Smoothly moving magos: ae sion rates
*The MPEG-4ASP codec has improved compression efficiency with locally record high-quality JPEG images.
enhanced interlacing and B-frame capabilities compared to the
conventional MPEG-4SP(Simple Profile) codec. Ry moving of
I Bidirectional, high-quality audio transmission Po MERC RO
* Audio signals are available as uncompressed PCM or with Subband
ADPCM compression. Audio can be bidirectionally transmitted over a
network along with images at an 8 kHz or 32 kHz sampling rate.
1 PoE (Power over Ethernet) eliminates need for a
m
dedicated power cable. WAN
* As power is provided alongside data in the same cable over a w +
network, wiring requirements are minimized and the number of > MPEG-4ASP
cables is reduced as well (excluding network combination dome Recording of QVGA low-resolution images
cameras and network video recorders). High-quality endo JPEG _
JPEG Images VGA high-resolution images
4 Simultaneous real-time surveillance as well as
image/audio recording and playback with the
software decoder.
* A single channel viewer (standard) and a multichannel viewer
(optional) are available. The viewer enables real-time surveillance and
simultaneous image/audio recording and playback on a PC.
1 The Network Video Recorder records digital data
as data is generated.
* ¡images from each network-based cameras can be recorded as JPEG
files and high quality audio recording is also possible.
» Recorded data can be searched at high speed and viewed via network.
" Able to withstand potential network problems to
maintain functioning as a surveillance system.
System configuration
= Network Video
Ces Receiver
Network Cameras ; - d
r
N-CC2360 @ N-VT2010 р
Speaker Microphone
amy
IP Network
Ww
En system , Network Video
r ы ansmitter
tad N-VT2010
icy
== | Remote Network Video Recoder
+ ‘ zul Controller
14
Multiplexers
EES FEATURES
© Special Video Signal Processor
" Optimizes split-screen displays
1 Digital Filter
à V-SYNC Position Compensation Circuit
I Multiple Split Screen Display
« Live monitoring and DVR playback can be seen in all split screen
options (16 segment only with C-MS161D).
= For live camera monitoring segments, cameras can be assigned
to the desired position.
= With camera selection, a required camera can be assigned
priority to always be shown (camera 1 selected).
- Motion Detection Function
* Object Size Settings
* Motion Detection Area setting
« Sensitivity Setting
» Alarm Recording
© "Seamless Operation” by Connecting 2 DVRs.
* Electronic Zoom, Auto Tilt and Auto Panning
Features Included.
© Versatile Alarm Functions
+ Sensor Alarm
« DVR Reproduction Alarm
* Video Loss Alarm
* Alarm Information
! Multi-Language Ability
! Summer Time (daylight savings)
I Remote control by C-RM500
- Key-lock function
E
Un am is
A LITT bl LL LTT TT rae
C-MS161D
16-Channel Duplex Multiplexer
C-MS91D
9-Channel Duplex Multiplexer
Ea)
EEE 1-Channel Digital Video Recorders
C-DR0105: HDD 500GB (2 x 250GB
C-DR0101: HDD 240GB (2 x 120GB
Recording Functions
- 500GB storage with 250GB x 2 HDDs built-in
(C-DR0105)
- High picture quality
1 Versatile recording with a choice of three modes
* General recording
» Internal timer recording
* Alarm recording
- Pre- and Post-Alarm recording
1 Time Lapse recording
* Audio recording
! Mirroring enhances reliability
Playback Functions
I Comprehensive high-speed search functions
* Time Search
* Block Search
* Time Shift Search
1 Flexible playback modes enhance system operation
* Forward and reverse playback modes
* Fast forward and fast reverse playback modes with
selectable X2, X4 and X8 speeds
* Forward Frame Playback and Reverse Frame Playback
* Forward Block and Reverse Block Playback
! Convenient simultaneous recording and playback
Other Functions
1 Network connectability
: Logging
! Useful status indication
I Summer Time (Daylight Savings Time)
- Key-lock function
1 Compact single rackmount (1U) size
15
Switchers, Video Distributor, and
Coaxial Multi-Transmission System
BEE Manual Switchers
These manual mechanical lock-type
switchers can manage up to six
(CC-3011B) or welve (CC-3021B)
camera inputs from a single output. Both
units can also be mounted in a rack
using an optional bracket, model
MB-15B-BK (1 unit) or MB-15B-J (2 units).
CC-3011B CC-3021B
BEE Video Distributor
TOA's C-VD6 video distributor adds versatility to CCTV operation
by distributing one video signal to six video outputs, or two different
video signals each to three outputs. The unit is compact and
lightweight and can be mounted on a standard rack cabinet with an
optional bracket, model MB-15B-BK (1 unit) or MB-15B-J (2 units).
C-VD6
E Coaxial Multi-Transmission System
1 Transmit video, audio and control signals
on one coaxial cable.
Video signal (simplex)
* Audio signal (duplex)
«Control signals (4 contacts/duplex)
1 System integration with security and
audio equipment.
+Camera/monitor/microphone/speaker/sensor etc.
«Save cable lines
# Speaker output
«1W (8 ohms) amplifier
I Maximum cable length 600m C-AP105
I Power Source: 12V DC (2 units in every sei)
1 Optional Rack-mount Kits:
MB-15B-BK (1 unit)
MB-15B-J (2 units)
Note: The C-AP105 includes one each of Unit A and Unit B.
SYSTEM EXAMPLE
Video
Camera Ap
в +
===
Max. Control
A
Control Output
Max. 4
16
LCD and CRT Monitors
BEE LCD Monitors
IK-H550V
* LCD monitor, 15"
* Active Matrix Super TFT
* 1024 x 768 pixels
IK-H750V
* LCD monitor, 17"
* Active Matrix Super TFT
* 1280 x 1024 pixels
IK-H950V IK-H550V IK-H750V IK-H950V
* LCD monitor, 19"
* Active Matrix Super TFT
* 1280 х 1024 pixels
BEE CRT Monitors
VCM-901 Aa e
* CRT monitor, 9", color L AN x „x ¡ia =
* 300TVL, audio ди 1 Fey NU
VCM-14H VEO
* CRT monitor, 14", color VCM-14H
* 350TVL, audio
VCM-1501
* CRT monitor, 15"
* 700TVL, audio
* metal cabinet
VCM-2101
* CRT monitor, 21", color
* A50TVL, audio VCM-1501
* metal cabinet
Optional Rack-mount Kits: VCM-2101
RMK-901
Rack mount kit for (2) VCM-901
RMK-14H
Rack mount kit for (1) VCM-14H
RMK-1401 17
Rack mount kit for (1) VCM-1501
Lenses, Brackets, Plugs, and Cables
BEE LENSES
13VG2812AS en
« Lens, normal, vari-focal, 2.8 - 12mm, CS-mount
13VG308AS =
* Lens, normal, vari-focal, 3.0 - 8mm, C5-mount
@
13VG308ASIR e
Lens, IR Sens, vari-focal, 3.0 - 8mm), CS-mount
13FGO6IR e
» Lens, IR Sens., mono-focal,
6mm, CS-mount
13FGOBIR e
* Lens, IR Sens., mono-focal,
8mm, CS5-mount
13PZG10x6C y
13VG1040ASIR
= Lens, IR Sens., vari-focal, 10 - 40mm, CS5-mount
13FG22IR e
* Lens, IR Sens., mono-focal, 2.2mm, C5-mount
13VG550
« Lens, normal, vari-focal, 5 - 50mm, CS-mount
Lens, Motorized, 6 - 60mm,
CS-mount
13VG20100AS ет 13FG28IR
* Lens, normal, vari-focal, 20 - 100mm, CS-mount » Lens, IR Sens., mono-focal, 2.8mm, CS-mount
13VG2811ASIR “6 13FGO4IR e
* Lens, IR Sens., vari-focal, 2.8 - 12mm, CS-mount * Lens, IR Sens., mono-facal, 4mm, CS-mount
m C-BC41
| У Сатега
Mounting
$ Bracket
4 C-BC31 =
Camera Mounting
Bracket
C-BC21
Camera Mounting
C-BC11 Bracket
Camera Mounting
Bracket
— NG PLUG AND CABLE
«30e ==
18
CC-4901 CC-4902 CC-4903
BNC Plug (set: 10 pieces) BNC Plug (set: 10 pieces) BNCJ-RCAP Plug BNC-BNCJ Plug
* BNC plug for connection with *BNC plug that allows solderless (Set: 10 pleces) (Set: 10 pieces)
CCTV-associated devices. connection with coaxial cables. «Conversion connector for eIntermediary connector for two
Soldering type. «Compatible with 3C-2V or BNC jacks and RCA pin plugs BNC jacks
* Compatible with 3C-2V or
5C-2V coaxial cables.
CC-4904 ©
5C-2V coaxial cables.
CC-P5BB es CC-01BB +» ®%* CC-05BB += <<
BNC T-Shape Connector Coaxial Cable with BNC Coaxial Cable with BNC Coaxial Cable with BNC
(Set: 10 pieces) Plugs (0.5m) (set: 10 cables) Plugs (1m) (set: 10 cables) Plugs (5m) (Set: 5 cables)
sT-shape relay connector for BNC jacks
«Cord for 0.5 m 3C-2V coaxial cables
and double-ended BNC plugs
*Cord for 1 m 3C-2V coaxial cables
and double-ended ENC plugs
#Cord for 5 m 3C-2V coaxial cables
and double-ended BNC plugs
IP Network Intercom Systems
BE FEATURES
I Scalable network communications for up to 1280
stations over data networks (LAN/WAN)
1 Flexible configuration options for existing cabling and
network infrastructure
Station Options:
I IP Stations with Ethernet port connect directly to the
network (up to 80 stations)
1 Connect up to sixteen two-wire stations to compact
Network Exchange (up to 80 exchanges for up to
1,280 stations)
1 Occupies minimal network bandwidth — 130 kbps
max. (station to station call)
1 Hands-free full-duplex conversation
1 Control and monitor through software and web
browser
1 Versatile features including 160 zone paging, time-
based call forwarding and scan monitoring
N-8000EX
IP Network Intercom Exchange
(Internal: 4 links/External: 8 links)
The IP Network Intercom Exchange uses packet audio technology to
permit connection of up to sixteen N-8000 Series stations, and features
two outputs for public address paging. Simultaneous hand-free
conversation is possible between stations. Moreover, the exchange is
equipped with a networking interface, allowing up to 80 exchanges to be
connected over a network using additional network intercom exchanges.
The Exchange can be mounted in an EIA standard rack (1-unit size) or to
a wall using the supplied bracket.
N-8010EX
IP Network Intercom Exchange
(Internal: 1 link/External: 2 links)
The IP Network Intercom Exchange uses packet audio technology to
permit connection of up to sixteen N-8000 Series stations. Simultaneous
hand-free conversation is possible between stations. Moreover, the
exchange is equipped with a networking interface, allowing up to 80
exchanges to be connected over a network using additional network
intercom exchanges. The Exchange can be mounted in an EIA standard
rack (1-unit size) or to a wall using the supplied bracket.
N-8000MI
Multi Interface Unit
The N-8000MI is a multi-interface unit designed for use with TOA's packet
intercom system (IP network-compatible intercom system) that employs
the packet audio technology. Connecting the multi-interface to a local
area network permits the ideal system for in-house or wide-area
information transmission applications, such as paging, periodical
broadcasts, and background music broadcasts, to be built between the
multi-interface and IP intercom exchange or other multi-interface unit. The
contact bridge function can be realized through contact input and output
control. The N-8000MI also features the tie-line function to be connected
the EXES-2000 intercom system or the EXES-6000 system. A total of up to
80 multi-interface units and IP intercom exchanges can be connected to a
network. The unit can be mounted in an EIA standard rack (1-unit size) or
to a wall using the supplied bracket.
19
20
IP Network Intercom Systems
= ч
r \
‘tit
N-8010MS
Standard Master
Station
DOOR
i § STATION
RS-191 el
E Optional
- Handset Unit _ -
N-8031MS
Flush-Mount N-8050DS
Hands-Free Master Door Station
Station
STATION BOARD UNIT
N-8031SB N-8050SB
Hands-Free Master Hands-Free
Station Board Unit Substation Board Unit
N-8011MS
Standard Hands-Free
Master Station
N-8020MS
Industrial-Use Master
Station
IP STATIONS
N-8500MS
IP Multifunctional
Master Station
The N-B500MS is an IP multifunction
master station employing packet audio
technology. Connecting the N-8500MS
to a network (LAN or WAN) allows
conversation of high sound quality to
be made between the N-8500MS and
intercom stations connected to the IP
Intercom Exchange, or between the N-
8500MS units. Besides, the N-8500MS
can be used in conjunction with the
Multi Interface units through a network.
In addition to the functions of the
standard Master Station, Power can
be supplied from the PoE (Power over
Ethernet) switching hub. (In this case,
an AC adapter is not required)
e Mount Back Box Flush Mount Back Box
N-8540DS
IP Door Station
The N-8540DS is an IP door station
employing packet audio technology.
Connecting the N-854005 to an IP
network (LAN or WAN) allows
conversation of high sound quality
to be made between the N-854005
and intercom station connected to
the IP Intercom Exchange, or
between the N-8540D5 and IP
multifunction master station. Besides,
the N-8540DS can be used in
conjunction with the Multi Interface
units through a network. It is in full
conformity with IP54 water-proof and
dust-proof standards.
(7 17
AD-1210P (CE)/(CU)
AC Adapter for IP Station
HEE FUNCTIONS
Exchange Basic Functions SYSTEM CONFIGURATION EXAMPLE
E Conversation
e Hands-free conversation
e Handsel conversation
* PTT conversation
E Call
e Individual call
e Redialing
» Recall
e Voice calling
* Group call
* Master call
E Incoming Call Selection
e Automatic connection
» Continuous call
E Speed Dialing
* Auto-dialing
* One-touch dialing
E Hold
» Mic Off
» Call hold
E Call transfer
E Automatic Transfer
* Group hunting
« Absence transfer
« Call forwarding
E Remote Response
E Executive Priority
E Paging
* Zone paging
* Paging
e All-call paging
E Paging Response
e Automatic response
* Zone number response
E Scan Monitor
E Door Remote Control (Door Station only)
@ Time-out
E Group blocking
@ Station Speaker Output Setting
E Ambient Noise Control
Multi Interface Unit's Functions
E Extermal input Paging
E PBX connection
E Tie-Line Connection
E BGM
E External Equipment Control
« One-shot make output
* Make/break output
E Calling Station IndicationCCTV Interlock
E Door Remote Control
E Contact Bridge
E Paging Busy Input
21
22
Voice Security Intercom System
SYSTEM FEATURES
I System Capacity
* Single Exchange
4 Master stations
64 Substations
* Up to 16 Exchanges
64 Master stations
1,024 Substations
“Remote system management via
RS-232C port
* PC programming and monitoring
software
* Program and maintain multiple
exchanges offsite from one PC
(via modem)
! Audio and Data Logging
* PC archive of all system activity
(RS-232C port)
* Record individual Master station and
telephone audio
"Master Station Flexibility
* TOA master with alphanumeric
display and clock
* Supports single-line telephone
equipment with Caller-1D*
“Outside Line Communication
* Supports two C/O trunks
» Substation to outside telephone line
communication
“Paging Interface
* 16 control outputs
* 1 voice output
“External Audio Input
* 4 activation inputs and 1 audio input
for external source distribution
*in compliance with FCC regulation Part 68.
MASTER STATION
i >
>
Bu — MS-900
Master Station
FUNCTIONS
1 CALL-RELATED FUNCTION
= Group Call
SN TRANSFER-RELATED FUNCTION
* Call Transfer
1 CALL FORWARDING-RELATED
FUNCTIONS
* Call Forwarding
* Time-Based Call Forwarding
* NO-Answer Call Forwarding
* Busy Call Forwarding
1 MONITOR-RELATED FUNCTION
* Scan Monitor
| PAGING-RELATED FUNCTIONS
* Zone Paging
* All-Zone Paging
* Emergency Paging
* External Source Distributiln
* Paging Time-Out
* Paging Redial
! TELEPHONE-RELATED FUNCTIONS
+ Outging Telephone Calls
* Incoming Outside Line Calls
(Direct-In Line)
* Incoming Outside Line Calls
(Direct-In Dialing)
s Outside Line Connection Time-Out
* Outside Line Conversation Recording
* Outside Line Call Forwarding
+ Time-Based Outside Line Calll
Forwarding
* CONFERENCE-RELATED FUNCTIONS
* Three-Party Conference
(Individual Call Conference)
* Emergency Conference
(Up to 4 parties)
SUBSTATIONS
RS-150 RS-170 RS-190
Substation (Indoor Type) Substation (Outdoor Full-Duplex Substation
Vandal-Resistant Type) (Indoor Type with Control Output)
1 @
У
|
RS-191
J Option Handset
bg,
| “ for RS-190
RS-160 RS-180 | |
Substation Substation 3 3
(Indoor Vandal-Resistant Type) (Outdoor Vandal-Resistant : J
Type with Control Output)
SYSTEM EXAMPLE
Outside line PC (for programming and system maintenance)
* Substation paging requires extemal amplifier
for each line card, model BG-130.
SYSTEM SPECIFICATIONS
* Exchange Method: PCM and space division
* Control Method: Common stored program control
* Maximum Cable Length
Exchange to Master station: 1.5km (22AWG)
Exchange to Substation: 800m (22AWG) (RS-190: 1.5km)
Exchange to telephone: less than 50012 (loop impedance)
Exchange to Exchange: 1.0km (22AWG) (total extension length)
* Wiring
Master station: 2 twisted pairs
Substation: 2-core shielded (RS-190: 2 twisted pairs)
Telephone: 1 twisted pair
Exchange to Exchange: 2-core shielded for Data,
2 twisted pairs for Audio (per link)
e Frequency Response: 300 — 3,400Hz
* Conversation Method
Substation to Master station: Voice Switch or PT T-activated
talk-back
Master station to Master station: Full-duplex handset
communication
* Power Requirements
Exchange: AC mains (PU-200) or 24V DC
VS-900DI/VS-910DI: 24V DC
* Operating Temperature
Exchange and Master station: 0 to 40°C
Substation: —10 to 50°C 23
Network Audio Adapter
BEE FEATURES NX-100
' IP-addressable Audio Codec converts analog audio
(mic or line) to standard IP-based format for
transmission over existing local or wide area
networks (LAN/WAN) including the Internet
! Bi-directional audio transport
© Contact closure transport - eight assignable
control inputs/outputs
1 Serial RS-232 data transport (NX-100 only)
- Reduces installation and operational costs when
distributing audio signals to remote locations
- Balanced mic/line input with adjustable volume
control
I Balanced line output =
à Built-in Ethernet port (10/100BaseT) NX-100S
! Point-to-point transmission (Unicast) of audio
signals to up to four locations
! Simultaneous transmission (Multicast) of audio
signals to up to 64 locations
- Control inputs can initiate and terminate audio
transmissions without the need for dedicated PC-
based or other control equipment
© Intuitive Configuration, Operating and Management
software
1 Browser-based software allows control and
monitoring from any network-based PC
© External 24 VDC input for battery backup operation
(NX-100 only)
- Requires AC power supply, model AD-246
1 Optional rack-mount kits:
MB-15B-BK (1 unit) Remote Multi-Point Access Broadcast System
MB-15B-J (2 units)
Front
Comparison Table =
on
Power source AG adapteror24V DC AC adapter only T HHUA
RS-232C port Yes No
Input signal LED No Yes AE ae
Input peak level LED No Yes
Setting! operation
Phantom power supply No Yes sofware
Euppled with fre MX-100
|Pv6-compatible Yes No
Guidelines on Line Band, Sound Quality and Delay Time
(1) For LAN and patate lines
Silence 0.02 776 NOTES:
PCM 50 -14kHz 32 kHz
Over Redundancy 0.93 g20 Note 1: Voice packet size
1.5 Mbps Sub-Band Silence 0.02 392 Voice packet size other than for “Line band of 1.5 Mbps or
ADPCM 90-14kHz Ye khz Rodundanoÿ 0.93 245 de te PA
> : packet ne band of 1.5 Mbps or highe
128 kbps 2 Silence 1.3 68 e
(Dedicated pd 50- 7kHz 16kHz data of 256 bytes (PCM)/32 bytes (Sub-Band ADPCM) data.
ire. sta.) ADPCM Redundancy 7.4 102 a. VOICE
: : Silence 26 34 N >
ns et | OR 60-3 4kHz 8 kHz Voice Packet Loss Recovery is a processing method when
Sibi Redundancy LE о a voice packet cannot be received due to communication
(2) For the Internet interference,
ha Voice. ER | ik ps | pri pg a Silence: Method of processing lost sectors as silence.
Line Band Carmo Audio Band | Sampling Redundancy: Method of accurately outputting continuous
- Recovery losses of up to 8 packets.
сы Sub-Band Silence Resend: Method of accurately outputting continuous:
512 kbps E ————
(ADSI ae ) ADPCM BRE Sch Retransmission 30 losses of up to 15 seconds.
¡Dedicated Sub-Band 50- TkHz 16kHZ Silence 1.3 Note 3: Required band
NE Г "Y re e a T =
line, etc.) ADPCM 50-3.4kHz “8kHz | Retranemission| 30 92 Required band represents the frequency band required for
N be 50-3.4kHz 8kHz ada = > data em ans on sere
(ISDN, etc.) ADPCM : Redundancy 15 51 2 METE
24
ue be +
cu [E] mm
teo 15 - A
wa Mar о «| 0F
The TOA CCTV Viewer Simulation = vas
Software is a powerful new CCTV sales and сечы ej
— 2)
training tool. It provides a virtual monitor view of 3 lima
various TOA cameras and allows you to adjust Campnriedion | © wait
parameters and view a virtual real-time simulation.| .., = uw mai
Г | (ama
= E [es e ma
The CCTV Viewer Simulation Software is
available as a FREE download from come hr i
www.toaelectronics.com! Wr a Bae. dn : 2
tu lame (5! . 105 u +|
TEE DAD |
Cover Bracket Bracket
us 2 == vz y
E, p esesmes | T come | ;
= o ba fem > = Ë
uo Selecting the right TOA camera and accessory couldn't be
8 = ue — ¡ easier with the new TOA CCTV Selection Guide! This 4-page
Я № РНР Ен
— A ORR а guide includes all of our PTZ Combination Dome, Compact
- 8 Box, and Fixed-Dome Cameras, Lenses, and Brackets.
1 CACHE
’ a nm RE ae
pe | The CCTV Selection Guide is available for down-
— load from www.toaelectronics.com.
ww | zi
TOA
Need a crash course in CCTV systems? No problem. We've designed the new Closed Circuit Television Systems
Fundamentals Course
TOA CCTV Training Textbook, a comprehensive “fundamentals” guide filled with
useful topics such as CCTV System Design, Camera Selection, Switcher Selection 8:
Video Recording, Remote-Controlled Surveillance 8: Network Cameras,
and a whole lot more!
-
The CCTV Training Textbook can be
found at www.toaelectronics.com.
TICA, Yapa
TOA Ekscrerics bre LISA;
TOA Canada Corporation jCAMALIAI
Ea
Cm
The TOA Video Surveillance Products Architectural and
Engineering Specification Guide is a compilation of all current
TESTE. TOA CCTV engineering specifications and is designed to
Architectural and Engineering help you easily specify the correct TOA CCTV product for your
projects.
The TOA Security A&E Specification Guide can
be downloaded at www.toaelectronics.com.
T
BEZ
| ча a. a =
TOA is recognized worldwide for the development and production
of high quality and reliable audio and security products.
The TOA security product line includes digital video recorders, PTZ
combination dome cameras, compact color cameras, IP network
cameras, intercom systems, and more, Visit us on the web at
www. toaelectronics.com.
TOA Electronics, Inc.
601 Gateway Blvd. Suite 300
South San Francisco, CA 94080
650.588.2538 usa
905.564.3570 canada
800.733.7088 * www.toaelectronics.com
Literature Order #: L-SECCATALOG
E Copyright 2007 TOA Electronics, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising