Turn Radio On/Off
Tones Chart
Symptom
Possible Cause/Solution
Busy Tones
A Group of LowPitched
Tones
Three short high
pitched tones
You cannot transmit
because all channels are
busy, release PTT and wait
for call-back.
Continuous lowpitched tone when
pressing the PTT
button
Backlight
and
Bar Color
Orange
Red
Green
Talk Permit. You can now
continue with your
requested transmission.
Indicates you are out of
range, or the Time-Out
Timer has activated. May
also indicate an Invalid
Mode, or Talk Prohibit/PTT
Inhibit.
Notification
When
Emergency
Alerts
The radio initiates an
emergency alarm or
call.
The radio receives an
emergency alarm or
call.
The radio is out of
range.
The radio enters failsoft
mode.
The radio is unable to
establish a full
connection with the
system.
The radio receives a
private call.
The radio receives a call
alert.
Critical
Alerts
Call Alerts
Scan On/Off - Top Side Button
1. Press and release the Top Side Button to turn scan on
or off.
You see the current scan state – SCAN ON or SCAN OFF. The
scan status symbol
is displayed, indicating scan is
active.
Edit the Scan List - Menu
1. Press the right side of the 4-way navigation button until
SCLN is displayed.
2.
Press and release the menu button below SCNL.
3.
Programming icon
4.
Select the Zone by depressing the right or left
navigation button and the 16 button select knob to
select the channel to be scanned.
5.
Press the button directly below SEL or DEL or RCL.
6.
Repeat steps for each channel to be scanned
7.
Press the HOME button to exit editing Scan List.
appears on the display.
APX7000
Dual Display
Keypad Tones Mute/Unmute (Menu)
1. Press the button directly below MUTE.
The current state is shown – TONES OFF or TONES ON.
2. Press the button directly below OFF or ON.
Note: Press the Home or the PTT button to exit without
changing the setting. Turning off keypad tones does not
affect any other tones.
Keypad Lock/Unlock – 2-Position Concentric Switch
Keypad Lock – Move 2-Position Concentric Switch to
Keypad Unlock - Move 2-Position Concentric Switch to O.
.
Quick
Reference
Card
Turn Radio On/Off
APX7000 Controls
1.
Top View
2.
2-Position Concentric
Keypad Lock/Unlock
16-Position
Select Knob
3-Position A/B/C
Not Programmed
Turn the radio off by rotating the On/Off/Volume Control
Knob counterclockwise until you hear a click.
Select a Channel
1.
Rotate the 16-position Channel select knob to the
desired Channel. The new channel name will appear on
the display.
2.
Press the PTT button to transmit. When speaking, keep
the microphone 1-2” from your mouth.
Emergency
3.
On/Off/Volume
Control Knob
Turn the radio on by rotating the On/Off/Volume Control
Knob clockwise until you hear a click.
Release PTT button to listen.
Select a Zone - Menu
Top Display
1.
2.
Side View
3.
Top Side Button
Scan On/Off
Push-to-Talk
(PTT) Button
Side Button 1
Zone Up
Side Button 2
Zone Down
Press the right side of the 4-way navigation button until
ZONE is displayed.
Press the right side of the 4-way navigation button until
the desired zone is displayed.
Press the Home button to confirm the displayed Zone.
Select a Zone – Side Button 1 or 2
1.
Press Side button 1 to Zone Up or Side button 2 to Zone
Down.
Emergency – Trunked Feature (Top Orange Button)
1. With the radio turned on, press the emergency button.
The LED lights solid red, the display alternates between
showing “EMERGENCY” and the current trunked zone and
talkgroup/channel, and a short, medium-pitched
emergency tone sounds.
2. Press the PTT button and announce your emergency.
3. Release the PTT button to end the transmission and wait
for a response from the dispatcher.
4. To exit emergency: Press and hold the Emergency button
for about one second.
Menu Select Items
Nuis Prfl Zone
ScnL Mute Batt
Info Rcnt Cnts
Myid
Menu Select
Select
Buttons
The radio user should NEVER clear the emergency on their
radio without being instructed to do so by dispatch.
Mode Select -Saving a Zone and Channel
to keypad
Save a zone and channel to a keypad digit.
Procedure:
1. Toggle your zone and channel to the
required zone and channel.
2. Press and hold (long press) the keypad
digit button you desire to program.
You hear a short, medium-pitched
tone when the zone and channel is saved.
To switch the radio to the programmed Zone
and Channel:
1. Press and release (short press) the keypad
digit.
Respond to a Private Conversation Call
When a Private Conversation Call is received,
two alert tones are heard, the LED blinks green,
the Call Received symbol ( ) flashes, and “CALL
RECEIVD” is displayed and menu select item will
automatically display RESP.
1. Press the menu select button below RESP
button within 20 seconds after the call
indicators begin.
2. Press and hold the PTT button to talk.
Release the PTT button to listen.
3. Press the Home to hang up and return to
the Home screen.
Respond to a Call Alert Page
When you receive a call alert page you hear
four repeating alert tones and the LED blinks
green. The call received icon blinks and display
shows “PAGE RECEIVED”.
1.
Press PTT or any button to clear the page.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising