Playing a Disc (LX model)
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
U.S. and Canadian LX model
CD/AUX
BUTTON
EJECT
BUTTON
RANDOM BUTTON
REPEAT BUTTON
Features
LOAD
INDICATOR
POWER/
VOLUME KNOB
TUNE KNOB
A.SEL/SCAN
BAR
SEEK/SKIP BAR
135
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
To Play a Disc
To load or play disc, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
You operate the disc player with the
same controls used for the radio. To
select the disc player, press the CD/
AUX button. You will see ‘‘CD’’ in the
display.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
This audio system can also play
CD-Rs and CD-RWs compressed in
MP3 or WMA formats. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. In WMA
format, ‘‘WMA’’ will appear in the
display. You can select up to 99
folders, or up to 255 tracks/files.
NOTE:
If a file on an MP3 or WMA disc is
protected by digital rights
management (DRM), the audio unit
displays FORMAT, and then skips to
the next file.
Video CDs and DVD discs do not
work in this unit.
136
The specifications of the compatible
MP3 file are:
−Sampling frequency:
32/44.1/48 kHz (MPEG1)
24/22.05/16 kHz (MPEG2)
−Bit rate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320 kbps
(MPEG1)
8/16/24/32/40/48/56/64/80/96/
112/128/160 kbps (MPEG2)
−Compatible with variable bit rate
and multi-session
−Maximum layers
(including ROOT): 8 layers
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
To Load a Disc
Text Data Display Function
Insert a disc about halfway into the
disc slot. The drive will pull the disc
in the rest of the way to play it. You
operate the disc player with the
same controls used for the radio.
The number of the current track is
shown in the display. When playing a
disc in MP3 or WMA, the numbers
of the current folder and file are
shown. The system will continuously
play a disc until you change modes.
Each time you press the DISP button,
the display shows you the text data
on a disc, if the disc was recorded
with text data.
You cannot load and play 3-inch
(8-cm) discs in this system.
You can see the album, artist, and
track name in the display. If a disc is
recorded in MP3 or WMA, you can
see the folder and file name, and the
album, artist, and track tag.
With the folder name, you will see
the FOLDER indicator in the display.
The TRACK indicator is shown with
the file or track name.
CONTINUED
137
Features
The specifications of the compatible
WMA file are:
−Bit rate:
48/64/80/96/128/160/192 kbps
−Sampling frequency:
32/44.1/48 kHz
−Compatible with variable bit rate
and multi-session
−Maximum layers
(including ROOT): 8 layers
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
The display shows up to about 10
characters of selected text data (the
folder name, file name, etc.). If the
text data has more than 10
characters, you will see the first 9
characters and the > indicator in
the display. Press and hold the DISP
button until the next 10 characters
are shown.
You will also see some text data
under these conditions:
When a new folder, file, or track is
selected.
When you change the audio mode
to play a disc with text data or in
MP3 or WMA.
When you insert a disc, and the
system begins to play.
138
When playing a CD-DA with text
data, the album and track name are
shown in the display. With a disc in
MP3 or WMA, the display shows the
folder and file name.
To Change or Select Tracks/Files
You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks (files in
MP3/WMA mode).
SEEK/SKIP − Each time you
press and release the
side of
the SEEK/SKIP bar, the player skips
forward to the beginning of the next
track (file in MP3 or WMA mode).
Press and release the
side, to
skip backward to the beginning of
the current track. Press it again to
skip to the beginning of the previous
track.
To move rapidly within a track, press
and hold the
or
side of the
SEEK/SKIP bar.
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
In MP3 or WMA mode
FOLDER-REPEAT − This feature,
when activated, replays all files on
the selected folder in the order they
are compressed. To activate folder
repeat, press the RPT button twice.
You will hear a beep and see F-RPT
in the display. The system
continuously replays the current
folder. Press the RPT button again to
turn it off. Pressing the RDM button,
or selecting a different folder with
the TUNE knob also turns off the
repeat feature.
REPEAT (TRACK/FILE
REPEAT) − To continuously replay
a track (files in MP3 or WMA mode),
press and release the RPT button.
You will see RPT in the display.
Press and hold the RPT button for 2
seconds to turn it off.
RANDOM (Random within a
disc) − This feature plays the
tracks within a disc (the files in MP3
or WMA mode) in random order. To
activate random play, press and
release the RDM button. In MP3 or
WMA mode, press the RDM button
repeatedly to select RDM (within a
disc random play). You will see RDM
in the display. Press the RDM button
for 2 seconds to return to normal
play.
Each time you press and release the
RPT button, the mode changes from
file repeat to folder repeat, then to
normal playing.
CONTINUED
139
Features
In MP3 or WMA mode
FOLDER SELECTION − To
select a different folder, turn the
TUNE knob to move to the
beginning of the next folder. Turn
the knob to the right to skip to the
next folder, and to the left to move to
the beginning of the current folder.
Turn it again to skip to the beginning
of the previous folder. Turning the
TUNE knob more than one click
skips several folders at a time.
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
In MP3 or WMA mode
FOLDER-RANDOM − This
feature, when activated, plays all
files on the selected folder in random
order. To activate folder random,
press the RDM button 2 times. You
will hear a beep and see F-RDM in
the display. The system will then
select and play files randomly. This
continues until you deactivate folder
random by pressing and holding the
RDM button again, or by selecting a
different folder with the TUNE knob.
Each time you press and release the
RDM button, the mode changes
from folder random play to random
play (within a disc random play),
then to normal playing.
SCAN (TRACK/FILE SCAN) −
The scan function samples all tracks
(files in MP3 or WMA) on the disc in
the order they are recorded on the
disc. To activate scan, press and
release the SCAN bar. You will see
SCAN in the display. You will get a
10 second sampling of each track/
file on the disc. Press and hold the
SCAN button for about 2 seconds to
get out of scan mode and play the
last track/file sampled.
Pressing either side of the SEEK/
SKIP bar also turns off the scan
feature.
In MP3 or WMA mode
F-SCAN (FOLDER SCAN) − This
feature, when activated, samples the
first file of each folder on the disc.
To activate folder scan, press the
SCAN bar twice. You will see
F-SCAN in the display.
The system plays the first file in the
first folder for about 10 seconds. If
you do nothing, the system will then
play the first files in the remaining
folders for 10 seconds each. After
playing the first file of the last folder,
the system plays normally.
Pressing either side of the SEEK/
SKIP bar, selecting a different folder
with the TUNE knob, or pressing the
SCAN bar, also turns off the folder
scan.
Each time you press and release the
SCAN bar, the mode changes from
scan to folder scan, then to normal
playing.
140
▼
Table of Contents
▲
Main Menu
Playing a Disc (LX model)
You can also eject the disc when the
ignition switch is off.
If you turn the system off while a
disc is playing, either with the
power/volume knob or by turning
off the ignition switch, the disc will
stay in the drive. When you turn the
system back on, the disc will begin
playing where it left off.
Features
To Stop Playing a Disc
Press the eject button (
) to
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
the disc after 10 seconds and put it in
pause mode. To begin playing, press
the CD/AUX button.
Protecting Discs
For information on how to handle
and protect compact discs, see page
202 .
To play the radio when a disc is
playing, press the AM or FM button.
Press the CD/AUX button again to
switch back to the disc player.
141
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising