OPTOKON HMA1 patchcord
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
OPTOKON HMA1 patchcord
Description:
The OPTOKON HMA optical modules are designed for connection of the nodes of tactical network by the help
of cables with optical fibers. The used „Expanded beam technology“ preserves all advantages of signals
transmission through the optical lines in field harsh environmental conditions.
Benefiting from expanded beam technology, with a long and proven industry track record, the precision
optical alignment system creates immunity from water, mud, dust, oil and other contaminants.
The HMA Hermaphroditic coupling eliminates the need for adaptors and male and female mating halves.
Hermaphroditic housings allow for rapid deployment, creating low loss Single mode, Multimode and Hybrid daisy
chained links in a variety of planforms ranging from simplex fiber to a copper Hybrid. The OPTOKON HMA is ideally
suited for environmental extremities where low maintenance and quick repairabilty is necessary, the connectors are
uniquely field installable and rapidly field repairable.
There are two different types of OPTOKON HMA connection modules:
a) LD type military tactical cable with OPTOKON HMA plugs at both sides
b) Hybrid connection module OPTOKON HMA to standard fiber optic connectors (SC, ST, LC, …)
Features:






Advanced expanded beam technology
Hermaphroditic interconnection
1 to 8 Fiber channels Singlemode or Multimode
Rugged field repairable connector design
Keyed boot for ‘Blind Mating’
Two versions
HMA plug tactical cable
HMA bulkhead hybrid cable
Military tactical cable terminated with the HMA plug
Application:



Military communications
Broadcast
Industrial, Petrochemical
Tactical cable with HMA plug
connectors coiled on SBD-200
drum.
Specifications:
0.5 – 0.7 dB (MM)
0.7 – 1.0 dB (SM)
Return loss
>30 dB (SM)
Operating temperature
-40 to +70 °C
Storage temperature
-55 to +85 °C
Water immersion
up to 2 m depth
Vibration Sinusoidal
10-500 Hz, 0.75 amplitude
@ 10 g acceleration
Free fall resistance
500 falls onto concrete
from 1.2 m height
Bump resistance 4000 bumps @ 40 g acceleration
Tensile Strength Tensile of 1500 N
cable dependent
Cable Variations Compatible with tactical cable:
Plug < 6 mm o/d
Bulkhead < 3 mm o/d
HMA-J/LD4 S7A-JC-200
Insertion loss (typ.)
HMA-J-BN-SCD/D8 OM2-002
HMA-J-4xSL/LD4 OM2-0.5-002
Hybrid cable with HMA connector and SC, ST
Planforms:
HMA-J / S900
2 CH
4 CH
HMA-S
2 CH
4 CH
6 CH
8 CH
STR_03_05_EN
12/05/2016
is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.CZ
1
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
Ordering Code:
HMA-X(xy)5 – (NxAAA)4
Connector type1
Up to 4 fibers
7
HMA-J(A )
Plug
HMA-J-BN(B)3 Bulkhead
HMA-J-BF(B)3 Bulkhead
Up to 8 fibers
HMA-S
Plug
HMA-S-BN
Bulkhead
HMA-S-BF
Bulkhead
jam-nut
flange
jam-nut
flange
HMA-M
HMA-M-BN
HMA-M-BF
HMA-M-BX
Plug
Bulkhead jam-nut
Bulkhead flange
Bulkhead flange
S900
S900-BN
S900-BF
Plug
Bulkhead jam-nut
Bulkhead flange
/
CCC FFF
CCC – Cable type
LD4
Tactical cable 4 fibers
LD2
Tactical cable 2 fibers
LD6
Tactical cable 6 fibers
LD8
Tactical cable 8 fibers
LDA4
Armored cable 4 fibers
D8
Duplex 2.8 x 5.5 mm
28
Cable Ø 2.8 mm
- XX
-
(L2) - LLL
Cable length
L, L2 Length (m)
Cable type
P Pigtail
JC jumper crossed2
JS jumper straight
FF – Fiber type
OM1 MM 62.5/125 µm
OM2 MM 50/125 µm
OM3 MM 50/125 µm
S2D
SM 9/125 µm (G.652D)
S7A6 SM 9/125 µm (G.657A1)
Note: 1) Other type of rugged connector on demand
Detailed information concerning connectors: HMA-J: STR_02-08_EN-Connector_ HMA-J
HMA-S: STR_03-08_EN-Connector_ HMA-S
HMA-M: STR_01-12_EN-CONNECTOR_HMA-M
S900:
STR_03-03_EN-Connector_S900
2) JC – standard, JS cable straight – on demand
3) –BNB, -BFB boot version, more information refer to STR_02-08_EN-Connector_ HMA-J
4) Hybrid cable – HMA to standard connectors (defined according to the CON_13-01_EN-ORD_CODE)
5) x –if cable configuration is different than planform configuration please use x=2, 4, 6 or 8 according to planform
y –if grip and boot color different from standard black please use y=G for Olive Green
6) S7A - G.657A1 standard, other on request
7) HMA-JA – cable plug, designed for LDA armored cable
N x AAA
HMA
XXX
L2
LLL
Cable connection:
Straight cable
Connected pins
2 fibers connector
4 fibers connector
A1 – A1
A1 – A1
B1 – B1
A2 – A2
B1 – B1
B2 – B2
2 fibers
A1 – B1
B1 – A1
Cross cable
Connected pins
4 fibers
6 fibers
A1 – B1
1–6
A2 – B2
2–5
B1 – A1
3–4
B2 – A2
4–3
5–2
6–1
8 fibers
1–8
2–7
3–6
4–5
5–4
6–3
7–2
8–1
STR_03_05_EN
12/05/2016
is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability.
OPTOKON a.s., Cerveny Kriz 250, 586 01 Jihlava, Czech Republic
tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM, INFO@OPTOKON.CZ
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising