Overhead Plex Antenna

ACTIVE
Radio Frequency
Identification (RFID)
Overhead Plex
Antenna
Description
The Overhead Plex Antenna connects directly to the AT-132-AT Activator to create
flexible coverage zones for a variety of applications including asset and personnel
tracking.
The antenna is comprised of a loop of wire embedded between two thin pieces of
Plexiglas that can be installed as is or painted to match its surroundings. The antenna’s
thin profile and robust construction make it suitable for below ceiling tiles for both
indoor and outdoor applications.
Features
Covert Design - blends with its surroundings for unobtrusive monitoring of personnel and assets
Flexible Range - operating read range is adjustable up to 11 feet*
Easy Installation -lightweight construction suitable for directly below the ceiling tile
Specifications
Name
Part Number
Installation
Operating Frequency
ActiveTag™ Overhead Plex Antenna
AT-132-PO
Mounts horizontally 3 inches below ceiling panel
126 kHz
Operating Range*
Connector
Case Material
Operating Temperature
Dimensions (approximate)
Weight (approximate)
4 x 4 foot coverage are from 11 feet high
Male BNC (Dual Binding Post)
Plexiglas
-40ºC to +85ºC (-40ºF to +185ºF)
0.4 in x 21 in x 21 in
8 pounds
*Operating Range depends on antenna selection, environmental factors
and operational requirements. Range in excess of 50 feet is achievable
with custom antenna designs.
© Copyright 2004 AXCESS International Inc.
3208 Commander Drive
Carrollton, Texas 75006 USA
972-407-6080 / 800-588-6080
Fax 972-407-9085
sales@axcessinc.com
www.axcessinc.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project