user`s manual
En
Full HD Digital Terrestrial Receiver
& Media Player
USER’S MANUAL
RE D
REA
DY
THD-2856+
MEDIA
TERRESTRIAL
FREE-TO AIR
PLAYER
PICTURE
VIEWER
SAFETY INFORMATIONS
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION
10. Water and Moisture- do not use this video product near water for example,
near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or
near a swimming pool and the like. Caution: Maintain electrical safety.
Powerline operated equipment or accessories connected to this unit should
bear safety certification mark on the accessory itself and should not be
modified so as to defeat the safety features. This will help avoid any and should
The lightning flash with arrowhead symbol, within an equilateral
not be modified so as to defeat the safety features. This will help avoid any
triangle, is intended to alert the user to the presence of uninsulated
potential hazard from electrical shock or fire. If in doubt, contact qualified
"dangerous voltage" within product's enclosure that may be of
service personnel.
sufficient magnitude to constitute a risk of electric shock.
: To reduce the
risk of fire and electric shock, do
not remove the cover (or back) of
the unit. Refer servicing only to qualified service personnel.
The exclamation point within an equilateral triangle is intended to 11. Accessories- Do not place this video product on an unstable cart, stand, tripod,
alert the user to the presence of important operation and servicing
bracket, or table. The video product may fall, causing serious injury to a child or
instructions in the literature accompanying the appliance.
adult as well as serious damage to the video product. Use this video product
only with a cart, stand, tripod, bracket, or table recommended by the
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
manufacturer's or sold with the video product. Any mounting of the product
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
should follow the manufacturer's instructions and use of a mounting accessory
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
recommended by the manufacturer.
PLUG TO WIDE SLOT AND FULLY INSERT.
11a. A video product and cart combination should be moved with care. Quick stops,
The apparatus shall not be exposed to dripping or splashing, and that no
excessive force, and uneven surfaces may cause the video product and cart
objects filled with liquids, such as vases, shall be place on the apparatus.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. combination to overturn.
Note to CATV system installer
CAUTION:
This reminder is provided to call the CATV system installer's attention to
Danger of explosion if battery is incorrectly replaced. Replace only with the
Section 820-40 of the NEC which provides guidelines for proper grounding
same or equivalent type.
and, in particular, specifies that the cable ground shall be connected to the
Where the mains plug or a appliance coupler is used as the disconnect device ,
grounding system of the building, as close to the point of cable entry as
the disconnect device , the disconnect device shall remain readily operable.
practical.
IMPORTANT SAFEGUARDS
12. Outdoor Antenna Grounding- If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.701984 (Section 54 of Canadian Electrical Code, Part1) provides information with
respect to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
In addition to the careful attention devoted to quality standards
in the manufacture of your video product, safety is a major factor
in the design of every instrument. However, safety is your
responsibility, too. This sheet lists important information that will
help to assure your enjoyment and proper use of the video
product and accessory equipment. Please read them carefully
13.
before operation and using your video product.
Installation
1. Read and Follow Instructions- All the safety and operation instructions
should be read before the video product is operated. Follow all
operating instructions.
2. Retain Instructions- The safety and operating instructions should be
retained for future reference.
3. Heed all Warnings-Comply with all warnings on the video product and in
the operating instructions.
4. Polarization- Some video products are equipped with a polarized
alternating -current line plug. This plug will fit into the power outlet, try
reversing the plug. If the plug still fails to fit, contact your electrician to
replace your obsolete outlet. To prevent electric shock, do not use this
polarized plug with an extension cord, receptacle, or other outlet unless
the blades can be fully inserted without blade exposure. If you need an
extension cord, use a polarized cord.
5. Power Sources- This video product should be operated only from the
type of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your video dealer or
local power company. For video products intended to operate from
battery power, or other sources, refer to the operating instructions.
6. Overloading- Do not overload wall outlets or extension cords as this can
result in a risk of fire or electric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or cracked wire insulation, and
broken plugs are dangerous, They may result in a shock or fire hazard.
Periodically examine the cord, and if its appearance indicated damage or
deteriorated insulation, have it replaced by your service technician.
7. Power-Cord Protection- Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the video product.
8. Ventilation- Slots and openings in the case are provided for ventilation
to ensure reliable operation of the video product and to protect it from
overheating. These openings must not the blocked or covered. The
openings should never be blocked by placing the video product on a
bed, sofa, rug, or heat register. This video product should not be placed
in a built-in installation such as a book case or rack, unless proper
ventilation is provided or the video product manufacturer's instructions
have been followed.
9. Attachments- Do not use attachments unless recommended by the video
product manufacturer as they may cause hazards.
Power Lines-An outside antenna system should not be located in the vicinity of
overhead power lines, other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching or approaching such
power lines or circuits, as contact with them might be fatal. Installing an
outdoor antenna can be hazardous and should be left to a professional
antenna installer.
Use
14. Cleaning- Unplug this video product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15. Objects that may touch dangerous voltage points or "short-out" parts could result in
a fire or electric shock. Never spill liquid of any kind on the video product.
16. Lightning-For added protection for this video product during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to
the video product due to lightning and power line surges.
Service
17. Servicing-Do not attempt to service this video product yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18. Conditions Requiring Service-Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the following conditions:
A.When the power-supply cord or plug is damaged.
B.If liquid has been spilled, or objects have fallen into the video product.
C.If the video product has been exposed to rain or water.
D.If the video does not operate normally by following the operating instructions.
Adjust only those controls that are covered by operating instructions.
Improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the video product
to its normal operation.
E.If the video product has been dropped or cabinet has been damaged.
F.When the video product exhibits a distinct change in performance-this
indicates a need for service.
19. Replacement Parts-When replacement parts are required, have the service
technician verify that the replacements he uses have the same safety characteristics
as the original parts. Use of replacements specified by the video product
manufacturer can prevent fire, electric shock, or other hazards.
20. Safety Check-Upon completion of any service or repairs to this video product, ask the
service technician to perform safety checks recommended by the manufacturer to
determine that the video product is in safe operating condition.
21. Wall or Ceiling Mounting- The product should be mounted to a wall or ceiling only
as recommended by the manufacturer.
22. Heat-The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that products heat.
CONTENTS
SAFETY INFORMATION
1 INTRODUCTION
1.1 Front panel
1.2 Rear panel
1.3 Remote control
1
1
2
2 CONNECTION
2.1 General
2.2 Connecting the TV
2.3 Connecting a HiFi System
3
3
3
3 INSTALLATION
3.1 Auto Search
3.2 Manual Search
3.3 Channel Filter
3.4 Country
3.5 LCN
3.6 Antenna Power
4
4
4
4
4
4
4 BASIC OPERATION
4.1 Switching Channel
4.2 HotKey
5
5
5 CHANNEL
5.1 Channel menu
5.2 Channel Manager
5.3 Favorite List
5.4 Channel Setup
6
6
6
6
6 PREFERENCE
6.1 Preference
7
7 SETTING
7.1 Setting menu
7.2 Timers
7.3 Child Lock
7.4 Date Time
7.5 Factory reset
7.6 Upgrade
7.7 Version
7.8 Auto Standby
8
8
8
8
9
9
9
9
8 AV
8.1 AV
10
9 GAMES
9.1 Games
11
10 MEDIA
10.1 Media
12
11 RECORD/ TIMESHIFT
11.1 Record
11.2 Timeshift
13
13
12 TROUBLESHOOTING
14
13 SPECIFICATIONS
15
1 INTRODUCTION
1.1 Front panel
USB
Channel Down
USB port
Channel Up
Standby button
1.2 Rear panel
AC Mains
TV Scart
for connection to the TV
Coaxial Digital Audio
RF Loop through
for an external device
HDMI output
Down Mix Audio
2 Channel L/R
TV aerial
for an external TV aerial
1
English
1.3 Remote control
4
5
6
Cursor/CH+, -/VOL+,(Cursor: Navigation buttons used to navigate
menu's items)
(CH+/-: Channel Up and Down)
(VOL+/-: Volume Up and Down)
15
1
7
OK button
(Confirm a selection within a menu)
8
Search backward /forward
9
PLAY/PAUSE
10
STOP
(Stop program playback or recording)
2
3
16
4
17
5
18
6
7
19
8
9
20
10
21
11
TV/RADIO
(Switch between TV and Radio)
12
AUDIO
(Select audio mode and audio track)
13
SUBTITLE (On/Off Subtitle)
14
GOTO
(Selects the play time of media)
15
MUTE (Turn off/on the volume)
16
BACK
(Switch to previous channel)
17
TIMESHIFT
(Active timeshift function)
EXIT (Exit from menu)
22
11
REC
(Record the TV program)
Menu
(Open and close the menu screen)
23
18
12
24
19
Previous/Next
13
25
20
MEDIA
(Enter USB menu)
14
26
21
USB
(Disk Manager)
22
RED/GREEN/YELLOW/BLUE Buttons
(For interactive function/Submenu
function buttons)
23
FAV
(Open the Favorite list)
1
STANDBY
(switch the STB on and standby)
2
Numeric entry
(Enter numeric values and select the channel
directly by entering it's number)
3
EPG
(Open up Electronic Program Guide Menu)
24
TTX (Open interactive service)
25
INFO
(Press for current channel information/
Operation guide )
26
21
English
TIMER
(Timer wake-up)
2 SYSTEM CONNECTION
2.1 General
There are many different types of TV and other equipment that you can connect to the device.
In this manual you will see some of the most common ways to connect your equipment.
2.2 Connecting the TV
Antenna
RF cable
HDMI cable
Scart cable
HDMI TV
2.3 Connecting a HiFi system
Hi-Fi
Coaxial cable
31
English
3 INSTALLATION
Init Install
Init Install
OSD Language
Country
Time Zone
Active Antenna
LCN
Start Search
If you use the STB for the first time, the "Installation" menu appears .
Press cursor button to setup the OSD Language, Country, Time Zone,
LCN and Antenna Power.
Highlight "Start Search ", then press the "OK" button to start channel
search.
Move
English
Hungary
Auto
Off
Off
OK Enter BACK Back EXIT Exit
Installation
Main Menu
1
2
3
4
5
Press the "MENU" button to enter main menu.
Press "UP"or " DOWN " button to highlight "Installation", press
"RIGHT" button to enter the Installation menu.
You are asked to input a password(the default password is"0000").
Input the correct password by pressing numeric buttons.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
Auto Search
Manual Search
Installation Channel Filter
Channel Country
LCN
Preference Activve Antenna
All Channels
Hungary
Off
Off
Setting
AV
Game
Move
Page+- OK Enter BACK Back EXIT Exit
3.1 Auto Search
Select the "Auto Search", press "OK" button to start Auto Search , press "EXIT" button to cancel.
3.2 Manual Search
Main Menu/Installation/ Manual Search
1 Select "Manual Search", press the "OK" button to enter the Manual
Search menu.
2 Press "LEFT" cursor button to set Frequency channel,
then highlight "Start Search",
press "OK" button to start channel scan .
Channel No.
Frequency
Installation Bandwidth
Channel Start Search
21
474000KHz
8M
Preference
Setting
AV
Game
3.3 Channel Filter
Move
Strength
Quality
Press "OK" or "RIGHT"button to select the All channels or FTA Only.
3.4 Country
Press "LEFT" or "RIGHT"button to set the country.
3.5 LCN
You can activate/disactivate the LCN function by setting the "LCN " to on/off.
If LCN (Logical Channel Number)Select function is activated, you can't change the original
number of TV channels by scanning .
3.6 Antenna Power
Press "LEFT"or "RIGHT"button to set the Antenna Power.
When "Antenna Power" is selected "On", the STB will provide 5V power to antenna.
It will not provide when selected "Off".
41
English
78%
90%
Page+- OK Enter BACK Back EXIT Exit
4 BASIC OPERATION
4.1 Switching Channel
You can change channels by:
1
2
3
Pressing the CH+/CH- buttons.
Entering the channel number using the NUMERIC(0-9) buttons.
Pressing "OK" button to enter channel list, then press "UP" and "DOWN" buttons to select channel.
4.2 Hotkey
In TV viewing mode, you can do the following:
Press UP/DOWN button to change channel.
Press LEFT/RIGHT button to adjust volume.
Use number key to change channel directly.
Press OK button to enter channel List.
Press BACK button will switch to previous channel.
Press SUBTITLE button to select the subtitle language.
Press EPG button to enter EPG menu.
Press INFO button can open information bar, then press INFO button again, it will show the
parameters of current channel.
51
English
5 CHANNEL
5.1 Channel menu
1
2
3
4
Press the "MENU" button to enter main menu.
Press "UP"or "DOWN " button to highlight "Channel", press
"RIGHT" button to enter the Channel menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
Main Menu
Installation
Channel Manager
Favorite List
Channel
Preference
Setting
AV
Game
Move
Page+- OK Enter BACK Back EXIT Exit
5.2 Channel Manager
1
2
In the Channel menu, select "Channel Manager", press "OK"
button to enter Channel Manager menu.
Press "UP" or "DOWN" button to highlight channel.
Use this menu to lock, delete, skip, swap and rename
channel.
Press "color" button, then press "OK" button to edit the
corresponding function.
Channel Manager
No.
0001
0002
0003
0004
0005
0006
0007
0008
Program Name
GEO NEWS NTL
GEO
GEO ENT B
GEO ENT U
GEO NE
AAG
AAG INTL
GEO SUPER
Lock Del Skip Rename
Move
Page+- OK Swap BACKBack EXIT Exit
5.3 Favorite List
1
2
In the Channel menu, select "Favorite List", press "OK"
button to enter Favorite List menu.
Press "UP" or "DOWN" button to highlight channel.
Press RED/GREEN/YELLOW/BLUE button to add the channel
to the Fav1~Fav4 List. An icon indicates which favorite list a
channel is in. Press numeric "1~4" button again to cancel.
Favorite List
No.
Program Name
0001
0002
0003
0004
0005
0006
0007
0008
GEO NEWS NTL
GEO
GEO ENT B
GEO ENT U
GEO NE
AAG
AAG INTL
GEO SUPER
Fav1 Fav2
Move
61
English
Page+-
Fav1
Fav2 Fav3 Fav4
Fav3 Fav4
BACK Back EXIT Exit
6 Preference
6.1 Preference
1
2
3
4
Press the "MENU" button to enter main menu.
Press "UP"or "DOWN " button to highlight "Preference", press
"RIGHT" button to enter the Preference menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
Main Menu
OSD Language
OSD Timeout
Installation OSD Transparency
Channel 1st Preferred Subtitle
2nd Preferred Subtitle
Preference Hard Hearing
1st Preferred Audio
Setting
2nd Preferred Audio
Muti Media
AV
PVR Config
English
4s
0%
English
English
Off
English
English
Game
Move
Page+- OK Enter BACK Back EXIT Exit
OSD Language
To select you desired OSD language.
OSD Timeout
1s/2s/3s/4s/5s/6s
OSD Transparency
0%/10%/20%/30%/40%/50%/60%
1st Preferred Subtitle /2nd Preferred Subtitle
To set the preferred subtitle language.
Hard Hearing
On/Off
1st Preferred Audio/ 2nd Preferred Audio
To set the preferred Audio language.
Multi Media
Press "MEDIA" button, you are entering Multi-media Mode, then you can set Multi Media menu.
Mp4 Subtitle Language:
Mp4 Subtitle CodePage:
EBook Language:
EBook CodePage:
Movie Repeat:
Music Repeat:
Photo Repeat:
BG music:
Slide Time:
Effect:
To set the preferred subtitle language.
ISO8859/Windows125x
To set the preferred EBook language.
ISO8859/Windows125x
Repeat-Dir/ Repeat-OFF/ Repeat- One
Repeat-Dir/ Repeat-OFF/ Repeat- One
Repeat-Dir/ Repeat-OFF
On/ Off
3/6/9/12/15 Seconds
None/ Wipe Top / Wipe Bottom/ Wipe Left/ Wipe Right/ Wipe
PVR Config
PVR File Format:
File Size:
Timeshift:
Timeshift Length:
Timeshift to Record:
TS/PS
Auto/1G/2G/3G/4G
Off/ Auto/ Timeshift
Auto/ 30 min/ 1hr/2hr
On/ Off
71
English
etc.
7 Setting
7.1 Setting Menu
1
2
3
4
Press the "MENU" button to enter main menu.
Press "UP"or "DOWN " button to highlight "Setting", press
"RIGHT" button to enter the Setting menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
Main Menu
Timers
Child Lock
Installation Date Time
Channel Factory Reset
Upgrade
Preference Version
Setting
Auto Standy
3hr
AV
Game
Move
Page+- OK Enter BACK Back EXIT Exit
7.2 Timers
This menu allows us to set the program timer.
You can set 27 timers.
Press Red button to delete all timers
Press GREEN button to delete the highlighted timer
Press YELLOW button to edit timer
Date:
Press "RIGHT" then numeric button to input date.
Program Name:
You can select a desired channel as the timer channel.
Start Time:
Press "RIGHT" then numeric button to input the start time.
End Time:
You can see the end time information.
Duration:
Press "RIGHT" then press numeric button to input the duration time.
Mode:
Once/Daily/ Weekly/ Monthly
Type:
Recorder/Channel/ Standby/ On
AD Record:
On/ Off
Subtitle Record:
On/Off
Teletext Record:
On/Off
7.3 Child Lock
You are asked to input a password(the default password is"0000").
Input the correct password by pressing numeric buttons.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
On/Off
System Lock:
0/4~18
Parental Rating:
Change Pin Code:
Old Password
To input old password
New Password
To input new password.
Confirm Password
To confirm the new password.
7.4 Date Time
Date Time Mode:
Date:
Time:
Time Zone:
Day Light Saving:
The options are : Auto/Manual
Date" and "Time" menus are valid only when selected
"Manual" in Date Time Mode menu.
Press "OK" then numeric button to input the date.
Press "OK" then numeric button to input the time.
This menu is valid only when selected "Auto"
in Date Time Mode menu .
The GMT offset range is "Auto/-12:00 ~ +12:00", increasing
half hour progressively.
The options are : Off / On
81
English
7.5 Factory Reset
This menu allows you to re-set the device back to factory settings, clear all existed channels.
You are asked to input a password(the default password is"0000").
Input the correct password by pressing numeric buttons.
7.6 Upgrade
We offer the functions for user to upgrade software version by USB and OTA.
USB upgrade:
Highlight "USB Upgrade", press "RIGHT" button to enter file list, select the upgrade file, then press
"OK" button to upgrade software.
OTA( over the air) upgrade:
Highlight "OTA Upgrade", press "RIGHT" button to enter OTA Upgrade menu.
Set the options, then select "OTA Upgrade" option, press "OK" button to start upgrade.
7.7 Version
This menu can display some parameters of Hardware Version, Software Version,
F/W Version and Build Date information in this Model.
1 In "Settings" menu, select "Version", press "OK" button
to open Version information window .
2
Press "EXIT" button to exit.
7.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto Standby is
1hr/2hr/3hr. The receiver will switch to standby automatically when it doesn't receive commands
from the remote control for 1/2/3 hours. To avoid the automatic switch off, set Auto Standby to OFF.
91
English
8
AV
8.1 AV
1
2
3
4
Press the "MENU" button to enter main menu.
Press "UP"or "DOWN " button to highlight "AV", press
"RIGHT" button to enter the AV menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
Main Menu
Contrast
Brightness
Installation Saturation
Channel HUE
SPDIF
Preference Aspect Ratio
Video Output
Setting
Video Resolution
HDMI Audio
AV
12
12
18
1
Mute
4:3 LB
CVBS
576p_50
HDMI PCM
Game
Move
Page+- OK Enter BACK Back EXIT Exit
Contrast
Highlight "Contrast" and press "RIGHT" button, then you can press"RIGHT"
and "LEFT" button to adjust contrast.
Brightness
Highlight "Brightness" and press "RIGHT" button, then you can press"RIGHT"
and "LEFT" button to adjust Brightness.
Saturation
Highlight "Saturation" and press "RIGHT" button, then you can press"RIGHT"
and "LEFT" button to adjust Saturation.
HUE
Highlight "HUE" and press "RIGHT" button, then you can press"RIGHT"
and "LEFT" button to adjust HUE.
SPDIF
Mute/Bitstream/PCM
Aspect Ratio
4:3LB/ 4:3PS/16:9 /Full Screen
Video Output
RGB/ CVBS
Video Resolution
480p_60/480i_30/576p_50/576i_25/720p_60/720p_50/
1080i_30/1080i_25/1080p_60/1080P_50/Auto Detect
HDMI Audio:
HDMI Mute/HDMI PCM/HDMI RAW
10
1
English
9 GAME
9.1 Game
This menu allows you to play games.
1
2
3
4
Main Menu
Press the "MENU" button to enter main menu.
Press "UP"or "DOWN" button to highlight "Game", press "RIGHT"
button to enter the Game menu.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the game .
Press "EXIT" button to exit.
Box Man
Tetris
Installation Hit Rat
Channel Go Bang
Sudoku
Preference
Setting
AV
Game
Move
11
1
English
Page+- OK Enter BACK Back EXIT Exit
10 MEDIA
10.1 Media
The product supports 7 types of Media lists.
1
2
3
Press the MEDIA button to enter Multi Media mode.
Press"RIGHT" or "LEFT" button to highlight each list, then press "DOWN" button to enter the list.
In List menu, press cursor button to browse folders and files.
Press "BACK" button to return to previous menu.
Movie:
Playback video files
Music:
Playback audio files
Photo:
View the photos
Game(Native 32 Games):
Play the game you have transferred
Record Manager:
Manage the Record files
If there are more than one partitions. we should select the record partition.
RED button:
Select the record partition
GREEN button:
Format the partition to FAT 32
YELLOW button:
Format the partition to NTFS
Enter the record partition, we can see the record files.
RED button:
Delete the highlight file
GREEN button:
Rename the highlight file
BLUE button:
Delete all record files
Disk Manager:
In partition menu
Format the partition to FAT 32
GREEN button:
Format the partition to NTFS
YELLOW button:
Move or copy file
RED button:
Device Information
BLUE button:
When you select file(folder)
RED button:
GREEN button:
YELLOW button:
BLUE button:
Ebook:
Move or copy the select file(folder)
Rename the highlight file(folder)
Delete the highlight file(folder)
Delete all files(folder)
Used to read Ebook
Press "UP/DOWN"button to page up/page down.
Press "BACK" to back previous menu.
ISO:
Playback DVD files.
NOTE:
Do not move the Hard Disk suddenly while the Hard Disk is running in PC or device . In that
case, the device may not identify the Hard Disk.
The company shall not be liable for any corruption of data on the hard disk drive
caused by the carelessness or misuse of users.
12
1
English
11 RECORD & TIMESHIFT
Plugging an external Mass Storage Device on the USB port gives you access to Time Shift/Record
a broadcast program.
Pause a broadcast program and continue watching it later (Time Shift )
Record a broadcast program.
When the space available on the Mass Storage Device runs out, recording operation of
broadcast will stop.
NOTE:
Please use USB 2.0 disk when recording or timeshift.
For timeshift and recording feature, you need take bigger size USB pen
driver or HDD (>2GB) for recording.
11.1 Record
Instant Record:
In viewing mode, press "RECORD" button to instantaneously start a record on the current channel.
Press"PAUSE" button to pause recording.
Press "STOP" button to stop recording, then a confirmation window appears.
Select "Yes" to stop recording. Select "No" to continue recording.
Programmer Playback:
Press "USB" button to enter Record List.
Highlight the desired file, press "OK" button to view the recorded file.
11.2 Timeshift
You should set Main Menu->Preference->PVR config firstly->Timeshift
There are 3 different ways to timeshift program.
1. Auto: In viewing mode, the model will Enter Timeshift automatically after 5 seconds.
2. Timeshift: Time Shift can be done in viewing mode by pressing the "TIMESHIFT" button.
3. Off: In viewing mode, the model can not enter timeshift by pressing the "TIMESHIFT" button.
Initiate
Time Shift can be done in viewing mode by pressing the "TIMESHIFT" button.
Trickmodes
During the playback, it is possible to perform the following actions :
Press "PAUSE" button to pause the playback
Press "FORWARD" button to fast forward the playback
Press "BACKWARD" button to rewind the playback
Stop the Time Shift
Press "STOP" button to stop TimeShift.
NOTE:
Please select famous brand USB 2.0 USB HDD or USB stick for Recording and Timeshift, such as SAMSUNG,
HITACHI and SONY. Some USB devices maybe can't be supported due to its quality.
13
1
English
12 TROUBLESHOOTING
In some region, the digital terrestrial signal may be weak. So you'd better use the antenna in
which the booster was built ,for watching the weak signal channels.
Problem
Possible cause
What to do
Standby light not lit
Mains lead unplugged
Mains fuse blown
Check mains lead
Check fuse
No signal found
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound
Scart/AV is not selected on your TV
Reduce to another channel
Scrambled channel
message
Channel is scrambled
Select alternative channel
No response to remote
control
Receiver off
Handset not aimed correctly
Front panel obstructed
Hand set batteries exhausted
Plug in and turn on plug
Aim handset at front panel
Check for obstructions
Replace handset batteries
Forgotten channel lock
code
Re-install channels to cancel
channel lock
Forgotten menu lock
code
Contact help line
The STB can not start record
or timeshift the live program
The USB device is unconnected
to STB or USB device is full, or the
USB device is damaged
Connected the USB device to
STB or delete some files in the
USB device or change a good
USB device.
After moving the STB to
another room you find you
are no longer able to
receive digital reception
The aerial feed former new point
may come through a distribution
system which may reduce the
digital signal now received by the
box.
Try a direct feed from the antenna
14
1
English
13 SPECIFICATIONS
TUNER & CHANNEL
RF INPUT CONNECTOR x1
(IEC-TYPE, IEC169-2, FEMALE)
RF OUTPUT CONNECTOR x1
(IEC-TYPE, IEC169-2, MALE (LOOPTHROUGH))
FREQUENCY RANGE:
174MHz~230MHz(VHF)
470MHz ~862MHz (UHF)
SIGNAL LEVEL:
-15 ~ -75 dbm
FEATURES
VIDEO DECODER
MPEG-2 MP@ML/
MPEG-4 AVC/H.264 HP @L4.1 and MP@L4.1
AUDIO DECODER
MPEG-1 Layer 1,2
PCM/HE-AAC V1.0
VIDEO FORMATS
4:3/16:9
VIDEO OUTPUT
CVBS/ RGB/ HDMI
MODULATION
QPSK,16QAM,64QAM
CONNECTION
MAIN POWER CABLE
TUNER
FIXED TYPE
ANTENNA INPUTx1, RF OUTPUT x1
COAXIAL x1
USB slot
HDMI OUTPUTx1
TO TV x1
Down Mix Stereo output (Left and Right) x1
SPDIF
DATA PORT
HDMI
SCART
ANALOG AUDIO OUTPUT
POWER SUPPLY
INPUT VOLTAGE
Ac220 - 240V, 50/60Hz
POWER CONSUMPTION
MAX. 6W
NOTE:
Design and Specifications are subject to change without notice.
15
1
English
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising