accessories product guide

accessories product guide
®
OSM
ACCESSORIES
PRODUCT GUIDE
OSM RECLOSER & RC10
Control Communication
Cubicle Accessories
1.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
INTRODUCTION
The OSM recloser is supplied with an RC10
Control Cubicle. NOJA Power can provide a
number of accessories which include:
Communications
•
•Test Sets
•
Simulators
•Bird Guards
•
Voltage Transformers
Mounting Brackets
•
OSM15 & RC10 Control
Communications Cubicle
Accessory LIST
Part Number
Description
USB-RS232-01
USB to RS232 adaptor
MOD-0003
RS232 GSM modem
Communications
USB-RS485-01
MOD-0013
MOD-0012
USB to RS485 adaptor
Ethernet to fibre optic modem
3G Dual SIM Ethernet modem
MOD-0008
RS232 Serial fibre optic modem
USB-Ethernet-01
USB to Ethernet adaptor
I S O -0002
USB-EthernetSurge-01
USB-Wifi-Adaptor-01
USB-Wifi-Router-01
IOM-11
PAN-REMOTE-02
Test Sets & Simulators
Isolator Repeater
USB to Ethernet 5kA surge protector
USB to Wifi adaptor (Direct single connection)
USB to Wifi router (Multiple connections)
Input/Output Module
RC10 dual remote panel HMI unit
RC-RMT-10
Rack Mounted Test Set
DEM-10
Demonstration Unit
ITSS-10
RC-10ES-DSA
INSTALLATION Accessories
OMB
OSM Simulator
RC10 distribution system automation (DSA) Simulator
Pole Mounting Bracket
SMF
Substation Mounting Frame
BGD
PVC Bird Guard
PAL
VT
Palm Connector
Voltage Transformer
Introduction
Introduction
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
2. 1.
COMMUNICATION accessories
The RC10 provides flexible communication options
for Supervisory Control and Data Acquisition
(SCADA) and to connect the Control and
Management Software (CMS) for engineering
access across serial, modem and Ethernet links.
The Relay module inside the RC10 has
3 USB ports, one RS232 port and one
LAN/‌Ethernet port available for communication
accessories connections.
Ethernet, WiFi, GSM and GPRS modems.
NOJA Power supplies approved
communication accessories. Using these
accessories ensures the required drivers are
supplied in the relay module.
All approved accessories are designed to
work within the RC10 specified temperature
range of -40°C to +55°C.
The USB ports can be used to provide a wide
number of interfaces such as RS485, RS232,
IO Module
Local Panel
RC10
RELAY MODULE
Remote Panel
(maximum length 120m)
CMS on Computer
Radio Module
RS485
Module
RS232
Module
Wireless
Module
Ethernet
Module
3.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
USB to RS232 Cable
PRODUCT DESCRIPTION
This cable provides a USB to RS232 port complete with a
male DB9 connector. This can be used to provide a second
serial port when the SCADA RS232 port on the relay is
already in use with other communications equipment.
USB-RS232-01
USB to RS485 Cable
The USB cable has Rx and Tx LEDs in the USB plug to give
a visual indication of data transfer across the cable.
PRODUCT DESCRIPTION
This cable provides a 2-wire USB to RS485 port. The ends
are bare cables for connection onto the terminals of the
RS485 communications equipment.
The USB cable has Rx and Tx LEDs in the USB plug to give
a visual indication of data transfer across the cable.
USB-RS485-01
GSM RS232 SERIAL
MODEM
Note: The RS485 port must be isolated if cables are
exiting the cubicle.
PRODUCT DESCRIPTION
The MOD-0003 is an industrial GSM modem to provide fast,
reliable connection for RC10 communications requirements.
The modem includes serial data connection, quad band
capability, AT command support and Status LED inside a
metal case. The modem can be easily mounted on the RC10
RTU mounting plate and powered from the RC10 External
Load supply.
MOD-0003
Ethernet to Fibre
Optic Modem
MOD-0013
The modem can be used with the following protocols:
•
•
•
CMS Remote Protocol
DNP3
IEC 61870-5-101
PRODUCT DESCRIPTION
The Ethernet to Fibre Modem is designed to convert Ethernet
networks to fibre networks by transparently converting Ethernet
signals to optic signals. The Ethernet to Fibre Optic Modem
is very easy to install and offers a high speed electrically
isolated communication over a long distance.
The Ethernet to Fibre Modem is a 10/100Base-TX Industrial
Ethernet Media Converter with 1x Ethernet port (RJ45, LINK/
ACT), 2x Fibre optic ST connections (TX, RX), Active,
Earth, Neutral points (V+, FG, V-) and additional earth point
enclosed in an IP30 metal case.
The device has 35mm DIN mount fittings for attaching to the
RC10 Radio tray.
Introduction
Introduction
Product Guide
3G DUAL SIM ETHERNET
MODEM
OSM Recloser & RC10 Control Communication Cubicle Accessories
4.
PRODUCT DESCRIPTION
The KIT-0052 is an industrial 3G GPRS Ethernet modem to
provide fast, reliable ‘always on’ wireless connection for RC10
communications requirements.
This modem supports dual SIM cards, which allows it to
switch to a secondary telecommunications provider if the
connection to the main provider is lost. The modem can also
be used in single SIM card mode.
MOD-0012
The modem features an Embedded RJ-45 10/100 LAN port,
6 status LEDs and can be powered from the RC10 External
Load supply. The modem can be easily mounted on the
RC10 RTU mounting plate and allows use of Virtual Private
Networks (VPN).
The Ethernet interface can be used with the following protocols:
•
•
•
RS232 SINGLE MODE
FIBRE OPTIC MODEM
CMS Remote Protocol over Ethernet
DNP3 TCP/IP
IEC 61870-5-104.
PRODUCT DESCRIPTION
The Serial to Fibre Modem RC10 accessory is designed
to convert Serial data to optic signals. The Serial to Fibre
Optic Modem is very easy to install and offers a high speed
electrically isolated communication over a long distance.
The accessory is ideal
substation applications.
MOD-0008
for
remote
panel
or
The device features ST fibre optic connectors with status
LEDs and RS232 DB9 port and a RS422/RS485 connector,
housed inside a metal case.
The modem can be powered from the RC10 External load
supply and installed on the RC10 RTU Mounting plate.
RS485 Isolator
PRODUCT DESCRIPTION
The RS485 isolator is used with the RS485 cable to
provide up to 3.5kV of opto-isolation for incoming cables.
A rapid Transient Voltage Suppressor inhibits lightning and
electrostatic discharge surges to 1kV. This provides protection
against lightning strikes and common mode interference.
ISO-0002
The isolator is provided with a power cable. The power cable
plugs into the 12VDC External Load connector on the SIM
module.
The isolator should always be used when copper
communications cables are exiting the cubicle.
5.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
RC10 DUAL REMOTE PANEL
HMI UNIT
PRODUCT DESCRIPTION
The Dual Remote HMI Unit is suitable for 19 inch rack
mounting and houses two Human Machine Interfaces (HMI)
designed for safe and easy operation. Each HMI is connected
to an ACR allowing the engineer to control and configure two
network protection devices from a single Dual Remote HMI
Unit.
PAN-REMOTE-02
USB to Ethernet
The Dual Remote Panel HMI Unit is intended for use inside
a substation control room allowing an engineer to control and
configure two ACRs or access network information such as
feeder voltage, current levels and advanced power protection
configurations in a safe and comfortable environment.
PRODUCT DESCRIPTION
This adaptor is used to provide an Ethernet port in the RC10
cubicle. It is powered from the USB port on the relay and
has a standard RJ45 socket. The Ethernet port supports
10/100Mbit network speeds.
USB-Ethernet-01
Ethernet Surge
Protector
USB-EthernetSurge-01
USB to WiFi
USB-WIFI-Adaptor-01
Note: The Ethernet port must be isolated if cables are
exiting the cubicle.
PRODUCT DESCRIPTION
The surge protector is used to protect the Ethernet port from
surges up to 5kA for incoming cables. It must be used when
Ethernet cables are exiting the cubicle. The earth cable is
bolted to the cubicle earth, and the Ethernet cables are
connected into the two RJ45 ports at either end.
The surge protector should always be used when copper
Ethernet cables are exiting the cubicle.
PRODUCT DESCRIPTION
This adaptor is used to provide 802.11b/g wireless Ethernet
connections to the RC10 cubicle. It is powered directly from
the USB port on the Relay, and is supplied complete with an
antenna. The following authentication and encryption types
are supported:
Authentication - WEP Open, WEP Shared, WPA Personal
and WPA2 Personal Encryption - TKIP and AES
Introduction
Introduction
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
6.
USB WiFi Router
USB-Wifi-Router-01
The WiFi Router is used with the Ethernet to Wireless adaptor to provide an outdoor wireless access
point for connection to the RC10 cubicle. It has a weather proof housing and can be used with an
external antenna if required.
It can be powered from the RC10 external load with a supplied cable. A 12VDC power source can
be used if the router is used elsewhere.
The router is configured through the Ethernet port with a web interface.
The following features are supported:
•
Wireless 802.11g, 802.11b, 802.3 and 802.3u supported
•AP Client Router, AP Router and AP operation mode
•
High output transmit power and receive sensitivity optimized
•
Passive power over Ethernet
•Antenna Alignment
•
Provides throughput monitor indicating the current wireless throughput
•
Output transmit power adjustable
•
Supports PPPoE, Dynamic IP, Static IP Internet Access
•Built-in NAT and DHCP server supporting static IP address distributing
•
Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through
•Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering
•
Provides WLAN ACL (Access Control List)
•
Supports Web management
To configure the NOJA Power Recloser App for Android Smart Phone/Tablet, iPhone and iPad the
USB WiFi router must be fitted to the RC10 to allow remote engineering access. The NOJA Power
Recloser App is available on Android and Apple App Store free of charge.
USB-Wifi-Router-01
NOJA Power Recloser app
7.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
Introduction
IO MODULE
IOM-11
Up to two Input Output (IO) modules can be supplied with the RC cubicle as an option. Each I/O
module has eight opto–coupled inputs and eight voltage free contact outputs with normally open
and normally closed contacts. The modules can be used to control or monitor external equipment,
implement custom automation functionality and provide remote I/O when not using the built in
SCADA functionality.
The CMS configuration software is used to program the modules. Any available control signal can
be programmed for each input and any combination of available indications can be programmed
for each output.
Ratings:
Digital Inputs
Input Type
Input voltage
Pickup Voltage
Reset Voltage
Time from valid input to activation of the control
DC Voltage
Up to 150 Vdc
Above 7 Vdc
Below 3 Vdc
30ms
Output Relay Contacts
Rated Voltage
- AC
- DC
Rated Current
6-230 Vac
4.5 – 125 Vdc
16A
2 x IO
Module
IOM-11
Product Guide
Introduction
OSM Recloser & RC10 Control Communication Cubicle Accessories
8.
Test SeT & SIMULATOR Accessories
Test set, Simulators and demo units are available for OSM reclosers and RC10 communication and
control cubicle. These accessories have been designed to assist engineers with bench testing of
protection settings by allowing system voltages and currents to be simulated when used with a power
system. These accessories could also be used for training and demonstration purposes.
Part Number
Description
Connection
ITS-03
Interface Test Set
ITSS-10
OSM Simulator
RC-RMT-10
Rack Mounted Test Set
DEM-10
Demonstration Unit
RC-10ES-DSA
RC10 Distribution System Automation (DSA) Simulator
RC10 distribution system
automation (DSA) Simulator
RC10
Communication Accessories / SCADA
PC/Communication Accessories
PRODUCT DESCRIPTION
The NOJA Power Distribution System Automation
(DSA) Simulator demonstrates RC10 grid
automation functionality, The Simulator uses
NOJA Power’s standard RC10 firmware/software
and includes the below reclosing features:
1. Voltage Reclosing Control (VRC)
2. Automatic Backfeed Restoration (ABR)
3. UV3 AutoClose
4. Loss of Supply Reclosing Mode (LSRM)
5. AutoOpen: Power Flow
6. AutoOpen: Timer
7. Temporary Time Addition (TTA)
Five total RC10 systems are arranged in a ring
formation. 3 Phase power with options for both
127V AC and 240V AC operation. Switch status
indication are shown for each RC10 and LED’s
power flow indication are shown between each
device.
Switchable loads and faults are available at each
midpoint between devices to simulate: phase to
ground faults, phase to phase faults and 3 phase
faults.
RC-10ES-DSA
Communication ports and USB A/B/C access
are available for CMS connections and application
simulation.
9.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
Rack Mounted Test Set
PRODUCT DESCRIPTION
The RC10 Rack Mounted Test Set has been custom designed
to assist engineers with bench testing of reclosers in protection
and SCADA systems.
The test set can be mounted into a standard 19 inch Rack or
onto existing testing benches.
RMT-10
OSM Simulator
It provides all functions for full Protection and SCADA point to
point testing with the ability to simulate all recloser and control
conditions for full functional testing.
PRODUCT DESCRIPTION
An optional RC10 OSM simulator is available for testing
purposes where an actual OSM recloser is unavailable. The
simulator plugs into the OSM Harting socket on the SIM and
provides signals required to simulate an actual recloser.
ITSS-10
INTERFACE Test Set
Two banana sockets on the simulator connect to voltage free
relay contacts to provide OSM position indication.
PRODUCT DESCRIPTION
The Interface Test Set simulates the output signals of an
OSM recloser's current and voltage sensors. Its main purpose
is to conduct testing of protection settings by allowing system
voltages and currents to be simulated when used with a
power system and three phase test set. Additionally, the ITS
is able to provide signals that simulate an actual recloser
and simulate coil faults. The simulator contact feedback is
provided through voltage-free relay contacts. A control cable
is supplied for connection to a control cubicle.
ITS-03
Demonstration Unit
PRODUCT DESCRIPTION
The RC10 Demo Unit is used primarily for training and
demonstration purposes. It can also be used to test SCADA
connections using RS232, USB and Ethernet ports.
The unit includes a Panel and Relay mounted in a sturdy
case. Supplied complete with power adaptor suitable for
110/220V AC input.
DEM-10
Introduction
Product Guide
Introduction
OSM Recloser & RC10 Control Communication Cubicle Accessories
10.
Installation Accessories
Installation accessories consist of items such as bracket connectors and voltage transformers for
RC10 Auxiliary Supply.
Part Number
Description
OMB
Pole Mounting Bracket
PAL
Palm Connector
INSTALLATION Accessories
SMF
Substation Mounting Pole
BGD
PVC Bird Guard
Voltage Transformer
VT
Supply
Bird Guard
Bird Guard
Bird Guard
Voltage
Transformer
Bird Guard
Voltage
Transformer
Pole Mounting
Bracket
RC
r
Controlle
RC
r
Controlle
Supply
Pole Mounting
Bracket
Load
Load
Bird Guard
Bird Guard
11.
Product Guide
OSM Recloser & RC10 Control Communication Cubicle Accessories
Pole Mounting Bracket
Introduction
PRODUCT DESCRIPTION
OMB-17
The Combined Pole Mounting Bracket is used to mount both the
VT and OSM15, OSM27 or OSM38 reclosers to both wooden and
concrete poles. It is constructed out of structural grade steel with a
hot-dip galvanized finish.
OMB-18
The Pole Mounting Bracket is used to mount the OSM15,
OSM27 and OSM38 reclosers to both wooden and concrete
poles. It is constructed out of structural grade steel with a
hot‑dip galvanized finish.
OMB-17
SMF-01
The Substation Mounting Frame is designed to fit all OSM reclosers
and control cubicles. The frame is manufactured out of structural
grade steel and is hot‑dip galvanized. It is used in conjunction with
OMB‑18 Pole mounting Bracket.
OMB-18
Installation
holes for
OMB‑18
Mounting
Bracket
Installation
holes for
RC10
Cubicle
TOP VIEW
TOP VIEW
BASE PLATE
BASE PLATE
1
0
C
B
No
Amended product number of Mounting bracket and OSM
Updated with common mounting bracket
Dimensions Added
Base plate details added
Description
DCM
Lak
Lak
Lak
JM
JM
SJT
SJT
Drawn App.
DO NOT SCALE
02/05/14
19/11/13
23/11/10
18/11/10
Date
SMF-01
Drawn App.
Description
REVISIONS
File: S:\Manufacturing-400\Drawings\NOJA-420 SMF\Waiting For Approval\NOJA-420-17 Rev1 - Substation Mounting GA, OSM300 with RC-10ES.dwg
Plot Date: May 02, 2014 - 11:52am
Drawn
Lak
Checked SJT
Approved SJT
Issued
17/11/10
Typical substation mounting frame
installations with OSM300 series
recloser and RC10
All dimensions in mm unless
otherwise stated
No
0
No
Date
C Copyright NOJA Power
This document remains the property
of NOJA Power at all times.
INITIAL RELEASE
DCM
Description
JM
Drawn App.
Scale
NTS
01/05/14
Date
No
REVISIONS
Original
Size
Title
A3
Typical substation mounting frame
installation with OSM310 series
recloser and RC10
SUBSTATION MOUNTING GA
OSM38-300 WITH RC-10ES
Drawing Number
NOJA-420-17
Sheet 1 of 1
Revision 1
DO NOT SCALE
All dimensions in mm unless
otherwise stated
Description
Drawn App.
Date
Copyright NOJA Power
This document remains the property
of NOJA Power at all times.
C
Drawn
DCM
Checked ST
Approved JM
01/05/2014
Issued
Scale
NTS
File: S:\Manufacturing-400\Drawings\NOJA-420 SMF\Waiting For Approval\NOJA-420-18 Rev0 - Substation Mounting GA, OSM310,15kV with RC-10ES.dwg
Plot Date: May 02, 2014 - 11:53am
Voltage Transformer
PRODUCT DESCRIPTION
Voltage Transformer
Pole mounted outdoor voltage transformer complete with mounting
bracket and accessories.
These VTs are designed to supply our control cubicle with LV
supply where a local LV supply is unavailable.
VT
Original
Size
Title
A3
SUBSTATION MOUNTING GA
OSM15-310 WITH RC-10ES
Drawing Number
NOJA-420-18
Sheet 1 of 1
Revision 0
Product Guide
Introduction
OSM Recloser & RC10 Control Communication Cubicle Accessories
12.
PRODUCT DESCRIPTION
Palm Connector
Single Phase Voltage Transformer
Pole mounted outdoor single phase voltage transformer complete
with mounting bracket and accessories.
These Single phase VTs are designed to supply our control cubicle
with LV supply where a local LV supply is unavailable.
VT (Single Phase)
Palm Connector
PRODUCT DESCRIPTION
CON-0020
Tunnel Connector is suitable for cable sizes from 40mm2 to
260mm2 Cables are secured in the connector with two hexagonal
socket screws. A tin-plated brass Palm Connector can be fitted to
the bushing instead if required.
CON-0020
PAL-01
NEMA 2-Hole Palm Connector provides an alternative connection
method to the OSM recloser HV terminals with 12mm threaded holes.
PAL-02
PAL-02
Right Angle 2-Hole Palm Connector provides an alternative
connection method to the OSM recloser HV terminals.
PAL-01
PAL-03
PAL-03
NEMA 2-Hole Palm Connector provides an alternative
connection method to the OSM recloser HV terminals with 14mm
non‑threaded holes.
PRODUCT DESCRIPTION
PVC Bird Guard
BGD-02
This bird guard has been custom designed and manufactured for
use with the 300 and 310 series OSM reclosers. This design fits
the bushing connectors perfectly for a neat and unobtrusive finish.
BGD-06
This bird guard is used for NEMA 2-Hole Palm Connector.
It has been designed for the palm connector to allow for the
increased height.
BGD-02
BGD-06
BGD-03
BGD-03
This bird guard is used for voltage transformers.
®
NOJA Power Australia
NOJA Power BRAZIL
NOJA Power CHILE
NOJA Power UK
NOJA Power USA
NOJA Power Switchgear Pty Ltd
16 Archimedes Place, Murarrie
Brisbane Qld 4172, Australia
NOJA Power do Brasil Ltda
Avenida Pierre Simon de Laplace, 764
Techno Park – Campinas – SP
CEP 13069-301, Brasil
NOJA Power SpA
Ramón Subercaseaux 1268, Of 304
San Miguel, Santiago.
Chile
NOJA Power Limited
4 Stalyhill Drive, Stalybridge
Cheshire SK 15 2TR
United Kingdom
NOJA Power, LLC
5065 Timberbridge Ln.
Alpharetta, Georgia 30022
United States of America
Phone:
Fax:
Email:
Web:
Phone:
Fax:
Email:
Web:
Phone:
Mobile:
Email:
Web:
Phone:
Mobile:
Email:
Web:
Phone: +1 (971) 404 9039
Email: sales@nojapower.com
Web: www.nojapower.com
Corporate Office & Factory
+61 (7) 3907 8777
+61 (7) 3399 6777
sales@nojapower.com.au
www.nojapower.com.au
Office & Factory
+55 (19) 3283 0041
+55 (19) 3283 0041
vendas@nojapower.com.br
www.nojapower.com.br
Sales Office
+56 (2) 2897 9649
+56 (9) 749 7 9 1 8 9
sales@nojapower.cl
w w w.nojapower.cl
Sales Office
+44 (01865) 58 9499
+44 (01865) 58 9400
sales@nojapower.co.uk
www.nojapower.co.uk
Sales Office
Distributor:
Scan to view
NOJA Power
website
NOJA Power® is a registered trademarks of NOJA Power Switchgear Pty Ltd. This document is copyright and is intended for users and distributors of NOJA Power Switchgear product. It contains information that is the
intellectual property of NOJA Power Switchgear and the document, or any part thereof, should not be copied or reproduced in any form without written permission from NOJA Power Switchgear.
NOJA Power Switchgear applies a policy of continued fundamental research and development and reserves the right to change designs and specifications of this product without notice. NOJA Power Switchgear does not
accept any responsibility for loss or damage incurred by anyone as a result of acting or refraining from action based on information in this Product Guide.
NOJA-566-05
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising