Desigo Touch Panel 10" MP277 6FL4303-2CA11

Desigo Touch Panel 10" MP277 6FL4303-2CA11
s
9
240
Desigo ™ PX
Desigo Touch panel 10"
MP277
6FL43032CA11
For use with
– PXC...-U automation stations with a PXA30-W2 / PXA30-W0 extension module
– PXC...-E.D automation stations with a PXA40-W2 / PXA40-W0 extension module
Used in conjunction with a modular PXC…-U / PXC...-E.D automation station
and the plug-in extension module PXA30/40-W2 or PXA30/40-W0, the Desigo
Touch Panel is a convenient device for the display and operation of building
services. The Web operator unit, which incorporates Internet Explorer, makes
operation highly user-friendly.









Compact construction and shallow mounting profile
Front plate is not susceptible to oils, fats or common cleaning agents
High grade TFT 10.4" display with 64k colors and 640 x 480 pixels
Touch screen, analog resistive
Windows® CE 5.0 operating system
RJ45 Ethernet connection
Display via Microsoft Internet Explorer®
Easy to operate, direct access to plant information
Generic and graphics-based operation and display of plant functions
(alarm handling, time schedules, calendars, setpoint adjustments, display
of measured values, etc.)
 Supports uniform access protection throughout the Desigo system
 Protection standard class IP65/NEMA 4x/NEMA 12 (front) and. IP20 (rear)
CM1N9240en_02
2012-08-21
Building Technologies
Functions
The Desigo Touch Panel functions are based on those of PX Web.
Refer to the user's guide:
User's guide
PX Web operation, CM110757. Please consider the notes concerning operation
and in particular concerning the graphics.
The MP277 uses Microsoft Internet Explorer® which does not support all Java
Scripts. Therefore not all of the features mentioned in the PX Web operation manual will run correctly. E.g. trend graphics cannot be displayed.
Indicators and operator
controls
Navigation is based on the Microsoft Internet Explorer.
The following buttons for operation are permanently available at the top of the
screen:
Buttons for Web browser
operation
(No function)
Backward navigation
Forward navigation
Stop page display
Refresh
Home page
Favorites
Add Favorite
Touch panel configuration buttons
Display/hide keyboard
Increase brightness of backlighting
Reduce brightness of backlighting
Configuration mode
Cleaning mode: Touch Screen is locked for several seconds
Device reset
Cross, red: Another browser window is open, and can be closed
with this button.
Cross, gray: Function unavailable
Note
The Desigo Touch Panel allows you to open a maximum of 2 browser windows at
a time.
The second window is indicated by the cross in red in the toolbar. An error message will be displayed if you attempt to open a third browser window.
Before opening a new browser window, you must first close one of the other windows.
2/6
Siemens
Building Technologies
Desigo Touch panel 10" MP277
CM1N9240en_02
2012-08-21
Auto Sleep Mode
 The backlighting is enabled as soon as the screen is touched anywhere.
 If the screen is not touched for approximately 5 minutes, the backlighting is
automatically reduced.
Type summary
6FL4303-2CA10
Touch Panel 10" MP277
Ordering
When ordering, please specify the quantity, product name and type code.
Example:
1
Desigo Touch Panel 10"
6FL4303-2CA11
Compatibility
Device
Modular automation stations,
Extension module
Modular automation stations
Extension module for graphics-based Web operation
Extension module for graphics-based Web operation
Type
PXC...-E.D,
PXA40...
PXC...-U
PXA30-W2
PXA30-W0
Data sheet
N9222
N9221
N9265
N9266
Disposal
The device includes electrical and electronic components and must not be disposed of
as domestic waste. The printed circuit board and the housing must be disposed of separately in accordance with local regulations.
Current local legislation must be observed.
Mounting instructions
The Desigo Touch Panel 10" is suitable for installation in the control panel front.
Commissioning
Calibration
When it is switched on for the first time, the Desigo Touch Panel starts automatically in Touch Screen calibration mode. Instructions are shown in the display
panel.
After calibration, the cursor can be positioned correctly.
Firmware download:
The firmware can be downloaded using The ProSave service tool from Siemens
Industry Automation and Drive Technologies.
The update process is described in the commissioning guide, CM110791.
3/6
Siemens
Building Technologies
Desigo Touch panel 10" MP277
CM1N9240en_02
2012-08-21
Construction
Front und side
Undersurface
Rear
 Display / Touch Screen
 Mounting seal
 Slot for a tension clamp
 Interfaces
 Type label
 DIL switch
 Captions of the interfaces
4/6
Siemens
Building Technologies
Desigo Touch panel 10" MP277
CM1N9240en_02
2012-08-21
Technical data
General device data
Display
Operation
Mounting
Connection
Housing
protection standard
Ambient conditions
Standards
Material
Dimensions
(See “Dimensions”)
Weight
Operating voltage
Range
Nominal current
Operating system
Type
Variable
Type
Resolution (W x H in pixels)
Colors
Language for operation
MTBF of backlighting (at 25°C)
Touch-sensitive surface
Numeric/alphanumeric inputs
Membrane keyboard
Mounting method
Orientation
Max. tilt without artificial ventilation
Ethernet
Front
Rear
Operation
Temperature (installed vertically)
Temperature (at max. tilt)
Humidity
Transport and storage
Temperature
Humidity
CE, GL, ABS, DNV, LRS,
FM Class I Div. 2, cULus,
EX Zone 2/22, C-TICK
Front panel
Cut-out
Mounting depth
Excluding packaging
DC 24 V
DC 20.4 – 28.8V
0.7 A
Windows CE 5.0
TFT liquid crystal display (LCD)
10.4"
Analog, resistive
640 x 480
64k
English (US)
Approx. 50,000 h
Yes/Yes (on screen)
No
Tension clamps
Vertical
+ / – 35°
RJ45 interface
IP65, NEMA 4, NEMA 4x,
NEMA 12; (if installed)
IP20
0 … 50°C
0 … 40°C
90% rh
–20 … +60°C
90% rh
Primarily aluminum
310 x 248 mm
61 mm
Approx.. 2650 g
5/6
Siemens
Building Technologies
Desigo Touch panel 10" MP277
CM1N9240en_02
2012-08-21
Dimensions
All dimensions in mm
6/6
Siemens
Building Technologies
 2008 - 2012 Siemens Switzerland Ltd.
Desigo Touch panel 10" MP277
Subject to change
CM1N9240en_02
2012-08-21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising