Nematron M1200 Industrial Display

Nematron M1200 Industrial Display
Nematron M1200 Industrial Display
12.1” Panel Mount Touchscreen Display
UL/cUL Class I Div 2 Approved
LED Backlit Display
DS M1200, Rev A
Analog Resistive Touchscreen
Aluminum Front Bezel
NEMA 4/4X/12, IP66
55°C Operating Temp
Industrial Grade Power Supply
Made in USA
Made in USA
Offering unparalleled value and superb quality, the Nematron brand M-Series are high performance LED-backlit
12.1”, 15”, 17”, 19”, 21.5” and 22” widescreen color TFT
flat panel monitors specifically designed for harsh industrial environments including Class I & II, Division 2 Hazardous Locations when mounted in a NEMA enclosure.
M-Series monitors accept standard analog VGA inputs
and can display VESA1 video modes up to 1680 x 1050
with 16 million colors. An optional 5-wire analog touch-
screen is available that offers RS-232 or USB interface
M-Series monitors are housed in heavy duty steel chassis with powder coated machined aluminum bezels. The
monitors are certified to NEMA 4/4X/12 & IP65 standards,
are UL/cUL listed, and meet CE requirements.
All M-Series monitors are shipped with a power input
wiring receptacle, VGA cable, touchscreen cables, mounting hardware, manual and driver software.
Standard Configuration
 12.1” SVGA Color TFT LED-backlit LCD Display
 5-wire Analog Resistive Touchscreen with RS-232 or
USB interface
- Optional non-Touch clear polycarbonate window
 Ultra-Thin panel mounting depth, less than 2.9” behind
 NEMA 4/4X/12 front bezel
-Optional 304 stainless steel front bezel
 Integral 100-240 VAC power supply
-Optional 24 VDC input power
 Simplified mounting clip installation with no studs
 Accepts analog 15-pin video input or DVI input
 UL and cUL Ordinary Locations Listed
 UL and cUL Hazardous Locations Listed
-Class I Division 2, Groups A, B, C, & D; Class II
Division 2, Groups F & G; Class III when mounted
in a NEMA enclosure
 FCC & CE Compliant
 2-Year warranty
Technical Specifications
Overall Dimensions
10.475” x 12.9” x 3.42” (266.1mm x 327.7mm x 86.75mm)
Panel Mounting Depth
2.4” (61.0mm)
Cutout Dimensions
9.68” x 12.10” (245.9mm x 307.3mm)
9.5 lbs (4.31kg)
Shipping Weight
13.0 lbs (5.89kg)
Option Weight (SS)*
+2.5 lbs (1.13kg)*
* Additional weight for Stainless Steel option.
Display Diagonal
12.1” (307.34mm)
Display Size H x V
9.69” x 7.26” (246.0mm x 184.5mm)
Native Resolution SVGA, 800 x 600
Aspect Ratio
450 nit
Contrast Ratio
Horz/Vert Viewing Angle 140°/120°
Backlight Life / Typical
50,000 hrs
5-wire Analog Resistive; No Touchscreen option
Available I/O
(1) Analog Video Port, (1) Digital Video (DVI) Port, Touchscreen inputs: (1) RS-232, (1) USB
Input Power
AC Input Voltage
100-240 VAC, 50-60 Hz, 0.5 A Maximum
DC Input Voltage
18-36 VDC, 2.0 A Maximum
Technical Specifications
Temperature 3 Operating
0°C to 55°C
-20°C to 70°C
20% to 80% RH, noncondensing
20% to 80% RH, noncondensing
Shock 15g peak acceleration, 11msec
30g peak acceleration, 11msec
Vibration (5-2000 Hz) 4
.006” peak to peak displacement, 1.0g maximum acceleration
.015” peak to peak displacement,
2.5g maximum acceleration
Altitude 5
Sea level to 10,000 feet
Sea level to 40,000 feet
Temperature specifications are for air temp surrounding the unit (i.e. inside any enclosure being utilized). Meets US Federal Requirements specified in 46
CFR 111.01-15 (d) for offshore electrical systems.
Shock & Vibration specifications established with Solid State drives and no rotating media.
Altitude specification is established by using all internal component specifications.
NEMA Rating
NEMA 4/4X/12, IP66
47 CFR, Part 15, Class A
EU CE Marking
CE, EN 55022: Class A, EN 61000-3-3, EN 61000-6-2, IEC 60950-1
Agency Approvals * UL508 Listed, ANSI/ISA 12.12.01-2012 6, cUL Listed CSA C22.2, #142, cUL Listed CSA 22.2, #213
* Class I Division 2, Groups A, B, C, D; Class II, Division 2, Groups F & G; Class III; Temp. Code: T5, when installed on a flat surface of a Type 1, 4, 4X, or 12 enclosure.
Front Panel
Front Panel Options
Powder-Coated Aluminum Front Panel; with No Logo; Machined 304 Stainless Steel
1. Optional 5-wire
Analog Resistive
2. Integral 100-240
VAC or 24 VDC
Power Supply
3. UL/cUL 508, Class I
Div 2, CE Approvals
4. I/O Connectivity
5. USB Touchscreen
Retention Cable
6. Panel Mounting via
7. VESA Mounting
M1200 - 75mm
8. Made with Pride in
the USA
Standard 2-year warranty
- Covers parts and service
Order Number Generation
Base Unit Configuration: Mxx00(T or WT), where x = 12, 15, 17, 19, 21, or 22 (for display size) NEMA 4/4X/12 panel
mount, LED-backlit TFT flat panel monitor with 5-wire analog resistive touch screen, built in AC power supply, and powder coated aluminum front panel. Units ship with AC wiring receptacle, 10’ VGA cable, 10’ RS-232 cable (touchscreen
equipped units only), 3m USB cable (touchscreen equipped units only), mounting hardware, and operator’s guide (DVI
cable sold separately).
Display Size:
12.1" SVGA LCD
Input Options:
Power Supply:
Non-Touch clear polycarbonate window
100-240 VAC
24 Volt DC
Isolated 24 Volt DC
Front Panel:
Powder Coated Aluminum (with Nematron nameplate)
Powder Coated Aluminum without Logo
Machined 304 Stainless Steel
CBL-3-VGA CBL-10-VGA CBL-25-VGA CBL-50-VGA 15-Pin analog VGA cable, 3’ length
15-Pin analog VGA cable, 10’ length
15-Pin analog VGA cable, 25’ length
15-Pin analog VGA cable, 50’ length
CBL-3-RS232 CBL-10-RS232 CBL-25-RS232 CBL-50-RS232 Serial RS-232 touch screen cable, 3’ length
Serial RS-232 touch screen cable, 10’ length
Serial RS-232 touch screen cable, 25’ length
Serial RS-232 touch screen cable, 50’ length
CBL-3-USB CBL-10-USB CBL-15-USB USB touch screen cable, 3’ length
USB touch screen cable, 10’ length
USB touch screen cable, 15’ length
CBL-3M-DVI DVI (type D) video cable, 3 m length
CBL-3M-HDMI/DVI CBL-25-HDMI/DVI CBL-50-HDMI/DVI 3 meter HDMI to DVI-D video cable
25 feet HDMI to DVI-D video cable
50 feet HDMI to DVI-D video cable
PWR-AC Plug for field wiring AC power
PWR-DC Plug for field wiring DC power
MISC-CLIP Mounting clip kit, includes 16 clips and screws
CBL-PWR-AC 6’ AC wiring cable with standard 3-prong US end on one side and Phoenix Power Wiring connector with cover on other end.
NOTE: NOT allowed for use in Hazardous Conditions.
DIN Rail Mounting Kit includes DIN Rail bracket that
mounts a Nematron nPC300 Node PC to M-Series
monitors using the 75mm or 100mm VESA mounting
pattern on the rear of the units.
DIN Rail section for mounting a Nematron nPC20 Node
PC to M-Series monitors using the 75mm or 100mm
VESA mounting pattern on the rear of the units.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF