E-HDSEM-M Technical Specifications Lengths 0.5 to

E-HDSEM-M Technical Specifications Lengths 0.5 to
E-HDSEM-M Technical Specifications
E-HDSEM-M Technical Specifications
Lengths 0.5 to 2.5 meters
High Speed HDMI® with Ethernet Cable Assembly
Rev. 140121
Liberty’s E-HDSEM-M High Speed HDMI® with Ethernet cable
assemblies are designed with consideration to the custom
installer. A high quality and heavily shielded digital transport
cable design mated with an HDMI approved connector
warrants excellent performance. The cable is third party ATC
verified to the highest HDMI cable standard, High Speed
HDMI® with Ethernet.
Key Features:
•
•
•
•
•
Smaller low profile molding
Smaller OD cable diameter
Short lengths
ATC verified performance
Flexible cable
The primary use of this cable type is connecting HDMI sources to HDMI displays. Typically Flat panel TV
connection to digital sources such as Blu-Ray® Players and Set top boxes. These shorter length cables
are excellent for HDMI rack patching and connecting sources and displays to extension technology and
or digital media distribution equipment. These are passive cables without any embedded equalization
and boost technology. They are not directional.
This cable family features smaller profile molding and a
reduced cable diameter. The cable is flexible and offers a
small footprint. These cables are fully future proof and
adequate to support HDMI® 2.0 bit rates of 18 Gbps up to 2
meters.
11675 Ridgeline Dr.
Colorado Springs, CO 80921
Key Applications:
•
•
•
Home Theater
Flat Panel TV
Equipment Rack patching
Toll-Free: 800-530-8998
Fax: 719-260-0075
E-HDSEM-M Technical Specifications
Technical Specifications
I/O Connections
HDMI
Male HDMI Type A connector
HDMI Supported Video, Audio and Ethernet
HDMI Maximum Video Compatibility
Video Compliance
Embedded Audio
Maximum Bandwidth
Ethernet
Deep Color 48 Bit at 1080p, 3D, and 4k x 2k
HDMI, HDCP, and CEC (Consumer Electronics Control)
Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
10.2 Gbps
100 Mbps
Cable Construction
HDMI Connector Material
HDMI Connector Dimensions
Jacket Material
Cable Construction
Overall Cable Size
Minimum Bend Radius
Maximum Tensile Load
Available Cable Lengths
Molded PVC
20x10.5x23.6mm (full length to back of cable strain relief is 31.6mm)
Flexible PVC
Copper, 30 AWG TMDS pairs
5.7 mm
57mm
10Kg
0.5 m (1.64 ft), 1 m (3.28 ft), 1.5 m (4.92 ft), 2.0m (6.56 ft), 2.5m (8.20 ft)
Environmental Requirements
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
0° to +60° C (+32° to +140° F)
20% to 85%, Non-condensing
-20° to +80° C (-0° to +176° F)
20% to 85%, Non-condensing
Power and Regulatory
Regulatory
NEC® CL2, CEC CMG FT4, RoHS
Part Numbers
Part Numbers
E-HDSEM-M-0.5
E-HDSEM-M-01
E-HDSEM-M-01.5
E-HDSEM-M-02
E-HDSEM-M-02.5
Cable Length
1.64 feet (0.5M)
3.28 feet (1.00m)
4.92 feet (1.50m)
6.56 feet (2.00m)
8.20 feet (2.50m)
Description
Molded High Speed HDMI® with Ethernet Cable ½ meter long
Molded High Speed HDMI® with Ethernet Cable 1 meter long
Molded High Speed HDMI® with Ethernet Cable 1½ meters long
Molded High Speed HDMI® with Ethernet Cable 2 meters long
Molded High Speed HDMI® with Ethernet Cable 2½ meters long
Liberty Wire & Cable specifications are subject to change without notice. Contact an account representative for current product specifications. Liberty Wire & Cable continuously
strives to ensure product specifications are accurate and complete. All physical specifications are nominal.
11675 Ridgeline Dr.
Colorado Springs, CO 80921
Toll-Free: 800-530-8998
Fax: 719-260-0075
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising