Component and Audio Distribution.
Component and Audio Distribution.
EXT-COMPAUD-143
How it works
The 1:3 Component Audio Distribution Amplifier
is the perfect solution for anyone who needs to
send one source of high definition component
video and analog or digital audio to multiple
displays at the same time. It supports all
component equipment, such as DVD players
and satellite set top boxes and all component
displays. In operation, the component video
source is connected to the distribution amplifier
at the input. Three outputs are available to be
used in part or in full. Once the unit is
connected and powered, your source is routed
to up to three component high definition
displays at the same time.
Features:
Connects up to three component displays at the same time to one
video source
Support SD(composite, YCbCr) and HDTV (YPbPr, RGsB) input signal
Maintains 480p, 720p, 1080i, and 1080p resolutions
Maintains high resolution video - beautiful HDTV resolutions up to
1080p are easily achieved video source at the same time
Specifications:
Input: YPbPr x1 or RGsB x1 (or RGBHV), or composite x3 1 Vp-p@ 75 ohm
Output: YPbPr x3, or RGsB (or RGBHV) x3, or composite 3x3
Audio input: coaxial (S/PDIF) x1 + R/L x1
Audio output: coaxial (S/PDIF) x3 + R/L x3
Analog audio input/output: audio 2 Vrms max 47k ohm
Bandwidth: 480MHz (-3dB)
Video Range: 1080p
Power Supply: 5V DC
Dimensions: 5.5"W x 1.5"H x 3.65"D
Shipping Weight: 4 lbs.
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
http://www.meditronik.com.pl
e-mail: office@meditronik.com.pl
1:3 Component
Audio Distribution
Amplifier
EXT-COMPAUD-143
User Manual
www.gefen.com
f
ASKING FOR ASSISTANCE
Technical Support:
Telephone
Fax
(818) 772-9100
(800) 545-6900
(818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
1:3 Component Audio DA is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
CONTENTS
1
Introduction
2
Features
3
Panel Layout
4
Panel Descriptions
5
Connecting And Operating The 1:3 Component Audio Da
6
Wiring Diagram
7
Specifications
8
Warranty
INTRODUCTION
Congratulations on your purchase of the 1:3 Component Audio DA. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 1:3 Component Audio DA
The 1:3 Component Audio Distribution Amplifier is the perfect solution for anyone
who needs to send one source of high definition component video and analog
or digital audio to multiple displays at the same time. It supports all component
equipment, such as DVD players and satellite set top boxes and all component
displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full.
Once the unit is connected and powered, your source is routed to up to three
component high definition displays at the same time.
1
FEATURES
Features
•
Connects up to three component displays at the same time to one video
source
•
Support SD (composite, YCbCr) and HDTV (YPbPr, RGsB) input signal
•
Maintains 480p, 720p, 1080i, and 1080p resolutions
•
Maintains high resolution video - beautiful HDTV resolutions up to 1080p are
easily achieved video source at the same time
Package Includes
(1) 1:3 Component Audio DA
(1) 6ft Component cable
(1) 5V DC Power Supply
(1) Users Manual
2
PANEL LAYOUT
Front Panel
1
2
3
4
Back Panel
5
6
7
8
3
9
10
PANEL DESCRIPTIONS
1
Component 2 Audio Output
Analog stereo L/R RCA audio outputs and one digital coaxial audio output.
These outputs will mirror the inputs connected to the Component audio inputs.
2
Component 3 Audio Output
Analog stereo L/R RCA audio outputs and one digital coaxial audio output.
These outputs will mirror the inputs connected to the Component audio inputs.
3
Component 2 Video Output
Component video outputs. This output will mirror the inputs connected to the
Component video input.
4
Component 3 Video Output
Component video outputs. This output will mirror the inputs connected to the
Component video input.
5
Component 1 Audio Output
Analog stereo L/R RCA audio outputs and one digital coaxial audio output.
These outputs will mirror the inputs connected to the Component audio inputs.
6
Component Audio Input
Analog stereo L/R RCA audio inputs and one digital coaxial audio input. These
inputs will be mirrored to all of the Component audio outputs.
7
Component 1 Video Output
Component video outputs. This output will mirror the inputs connected to the
Component video input.
8
Component Video Input
Component video inputs. This input will be mirrored to all of the Component
video outputs.
9
Power LED
This indicator will become active when the supplied Power adapter is
connected.
10 5V DC Power Input
Connects to the supplied 5V DC power adapter.
4
CONNECTING AND OPERATING THE 1:3 COMPONENT AUDIO DA
How to Connect the 1:3 Component Audio DA
1.
Connect the supplied Component cable from the source into the 1:3
Component Audio DA’s input port.
2.
Connect either a SPDIF digital audio or RCA analog right and left audio
cable into the 1:3 Component Audio DA’s audio input port.
3.
Connect the Component and audio cables from your display(s) (up to 3) into
the Component and audio out slots on the 1:3 Component Audio DA.
4.
Plug the 5V DC power supply into the 1:3 Component Audio DA.
5.
Plug the 5V DC wall mount power supply into the wall outlet.
NOTE: Both analog and digital audio outputs are active on all of the outputs.
Also, Composite video can also be fed into the Component video input to split
and distribute Composite video.
Application Diagram
Multiple 1:3 Component Audio DA devices can be daisy chained together to
distribute a single Component signal to 13 units maximum, for a total of 27 displays.
COMP-DA-1X3
COMP-DA-1X3
X3
COMP-DA-1X3
X9
Maximum 27 Displays
Maximum recommended distance of component cabling between each 1:3
Component Audio DA or display (1080p) is 50 ft. Maximum number of displays that
are supported in a large 1:3 Component Audio DA system is 27.
5
Component cable maximum distance is 50 feet at 1080p resolution without a EXT-COMPAUD-141
WIRING DIAGRAM
6
SPECIFICATIONS
Input ........ YPbPr x1 or RGsB x1 (or RGBHV), or Composite x 1 (1 Vp-p@ 75 Ohm)
Output .......................................... YPbPr x3, or RGsB(or RGBHV), or Composite x 3
Audio input .............................................................................. Digital (SPDIF) x1 + R/L x1
Audio output ............................................................................ Digital (SPDIF) x3 + R/L x3
Analog audio input/output ............................................... Audio 2 Vrms max 47k Ohm
Bandwidth ........................................................................................... 480MHz (-3dB)
Video Range ........................................................480i, 480p, 720p, 1080i, and 1080p
Differential gain ............................................................................................ 0.05%
Differential phase ................................................................................ 0.05 degree
Power Supply ................................................................................................... 5V DC
Dimensions ......................................................................... 5.5" W x 1.5" H x 3.65" D
Shipping Weight ................................................................................................. 3 lbs.
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising