- Tiger Star
GENERAL INFORMATION
Main Features
For your Safety
Unpacking
General Operation
RCU
Front Panel
Rear Panel
INSTALLATION
Connecting to TV using RCA support
Connecting to Digital Amplifier
MENU INFORMATION
Main Menu
1. Edit Channel
1.1 TV Channel List
1.2 Radio Channel List
1.3 Delete All
1.4 Favorite
1.5 System Backup
1.6 System Recovery
2. Installation
2.1 Installation
2.2 CA
2.3 Factory Setting
3. System Setup
3.1 Language
3.2 Information
3.3 TV System
3.4 Display Setting
3.5 Local Time setting
3.6 Timer Setting
3.7 Parental Lock
3.8 OSD Setting
3.9 Other
3
3
4
7
7
8
9
9
10
10
10
11
11
12
12
14
14
14
14
15
15
15
19
20
20
20
20
21
21
21
22
22
22
22
4. Tools
4.1 Network Local Setting
4.2 WiFi Manager
4.3 Upgrade by Network
4.4 Weather Forecast
4.5 RSS Reader
5. Game
6. USB
6.1 Media Player
6.2 PVR Storage Information
6.3 PVR Setting
6.4 Upgrade by USB
6.5 Remove USB device safely
7. Hot key
7.1 Info
7.2 EPG
7.3 Find
7.4 Number
7.5 TV/Radio
7.6 Up/Down
7.7 Left/Right
7.8 Mute
7.9 Pause
7.10 OK
7.11 Audio
7.12 Recall
7.13 Fav
7.14 Teletext
7.15 Zoom
23
23
23
23
24
24
24
24
24
25
25
26
26
27
27
27
27
28
28
28
28
28
28
28
29
29
29
29
29
30
A Digital Satellite Receiver is a convenient product that allows you to view a variety
of programs provided through satellite. This user's guide covers the installation of
the DSR and the necessary steps to implement various features. This also explains
special features available only in this DSR in detail, which will allow you to make full
use of these feature.
Information confirmed in this document is subject to change. We reserves the right,
without notice, to make change in product design or performances as progress in
engineering or technology.
Main Features
MPEG2 SD, MPEG2 HD, H.264/AVC SD, H.264/AVC HD,MP4,Divx
Embedded Conax(OPTION)
SCPC and MCPC receivable from C/Ku band satellite
Automatic PAL/NTSC conversion
4000 TV and Radio Channel Programmable
32 different favorite groups selection
Multi-language OSD
Fully support to 7 days Electronic Program Guide(EPG)
Picture in Graphics(PIG) support
True color On Screen Display
Automatic network search for newly added transponders
DiSEqC 1.2 fully support, 13/18V, 0/22K LNB control
Various channel editing functions(favorite, moving, locking, renaming, deleting
and sorting)
Parental control for channels
Ease to use Menu System
Software upgrades through RS232 port and Receiver to receiver, Support USB
upgrade
8 Timer Reservations, automatically switch to a specific channel Subtitle
support DVB EN300743 and EBU
Subtitle support DVB EN300743 and EBU
Teletext support DVB ETS300472 by VBI and OSD
Automatic save for last channel
Channel list can be sorted by alphabetic A Z,Scramble,Favorite,Lock,Sat
Support FAT16/FAT32/FAT12
Only list JPEG/BMP files
480i/p, 576i/p, 720p, 1080i, 1080p
Games
Recording, Timeshift, Mediaplayer
For Your Safety
To avoid electric-shock hazards, do not
open the cabinet, refer servicing to qualified
personnel only.
Keep the receiver away from flower vases,
tubs, sinks, etc., in order to avoid damaging
the equipment.
Do not expose the receiver un-der the
sunlight. And keep it away from the heat
source.
Do not block ventilation holes of the
Receiver so that air can circulate freely.
When the abnormal phenomenon occur,
you should cut off the power immediately.
Do not touch the receiver during thunder,
since that might create electric-shock
hazards.
Switch the receiver off whenever it remains
out of service for an extended period.
Be sure to turn the Receiver off and
disconnect the AC power cord before
cleaning the Receiver surface. If the
surface is dirty, wipe clean with a cloth
which has been dipped in a weak soap-andwater solution and wrung out thoroughly,
and then wipe again with a dry cloth.
Remote Control
Batteries
Guide
AV cable
General Operation
Throughout this manual you will notice that the everyday operation of the receiver is
based on a series of user friendly on screen display and menus. These menus will
help you get the most from your receiver, guiding you through installation, channel
organizing, viewing and many other functions.
All functions can be carried out using the buttons on the RCU, and some of the
functions can also be carried out using the buttons on the front panel.
The receiver is easy to use, always at your command and adaptable for future
advances.
Please be aware that new software may change the functionality of the receiver.
Should you experience any difficulties with the operation of your receiver, please
consult the relevant section of this manual, including the Problem Shooting, or
alternatively call your dealer or a customer service adviser.
RCU
Key
Function
Standby on/off
When watching a channel, mute the sound
0~9
Enter number of the required menu item or
select a channel number to watch
TV/R
Switches between TV and Radio mode
recall
Switches back to previous channel
FAV
Displays the favorite group list
SAT
Display the satellite window
FIND
Display the Find window
INFO
Show information of the current channel
MENU
Press this key one time to run menu onscreen
VOL+, VOL- Adjust the volume
OK, LIST
PR+, PR-
EXIT
Executes the selected item in the menu screen
or enters the desired value in any input mode
When watching a channel, change channels or
move to the next higher or lower item in the menu
When watching a channel, adjust the volume or
move to the left or right item in the menu
Return to the previous menu on the menu
screen or escape from the menu
EPG
Call up the EPG (Electronic Program Guide)
Audio
Choose audio mode
SLEEP
Enter into the sleep in mode
TXT/sub
Switch to teletext or subtitle mode
Display
Play list
Change video mode
Enter into Play list
Play and stop the program
rec/stop
Record and stop record the program
Press to fast forward or fast backward
Press to slow forward or slow backward
CH+,CH-
Change channels
PAUSE
Press once to pause the screen picture, press
once again to go to the normal mode
zoom
Enter into the zoom in mode
music
In Media Player menu, press to switch to music list
picture
In Media Player menu, press to switch to picture list
USB
Enter into USB list
movie
In Media Player menu, press to switch to Movie list
Enter into upgrade by USB menu
software
event
Enter into Timer Setting menu
The picture is only for reference, please make the object as the standard.
Rear Panel
Front
Panel
Rear Panel
CONNECT TO TV SET OR VIDEO PROJECTOR YPbPr OR
COMPONENT INPUTS
CONNECT TO A PC
FOR S/W UPGRADE
CONNECT TO A
DIGITAL AMPLIFIER
CONNECT TO THE INTERNET
POWER ON/OFF
CONNECT TO USB DEVICE
CONNECT TO TV SET HDMI INPUT
CONNECT VIDEO TO TV USING RCA JACK
CONNECT TO AUDIO R/L TO
TV OR AUDIO TUNER
LNB IN: CONNECT TO SATELLITE ANTENNA
LNB OUT:CONNECT TO THE OTHER RECEIVER
The picture is only for reference,please make the object as the standard.
Connecting to TV using RCA support
Satellite
Dish
IN
AUDIO
TV
L
R
Connecting to Digital Amplifier
Satellite
Dish
DIGITAL AUDIO
CONVERTOR OR
AMPLIFIER
L
R
DIGITAL AUDIO
SPEAKER
The picture is only for reference,please make the object as the standard.
Main Menu
Make sure that you have properly installed and connected the cables of the receiver .
If the receiver is the factory status or there is no program list, when power on, the
Main Menu window will be displayed on the screen.
During the normal TV/Radio mode, press MENU key on the RCU to enter into the
Main Menu window.
This menu consists of 6 major main menus
as follow.
- Edit Channel
- Installation
- System Setup
- Tools
- Game
- USB
During the installation the OK key confirms a selection and LIST key shows Down
List Box if the column has
mark. You can also use the numeric keys on the RCU
to enter numeric value.
Use the PR+, PR- key to move upwards and downwards from one line to another
line and use
key to move from main menu to sub menu and move from left
side to right side or versa.
Meantime, you want to escape the menu system, please press MENU or EXIT key
on the RCU.
If there is no program, you can not exit from the Main Menu window by pressing
MENU or EXIT key. System will inform "No channel" and the following items turn grey.
Sub-menu
Turn grey when there is no program
Edit Channel
TV Channel List
Radio Channel List
Delete all
System Backup
Installation
CA
Factory Setting
Installation
Information
Language
Local Time Setting
Parental Lock
Other
System Setup
Favorite
System Recovery
Display Setting
TV System
Timer Setting
OSD Setting
Tools
Network Local Setting
Upgrade by Network
RSS Reader
Game
Othello
USB
Media Player
PVR Storage Information
PVR Setting
Upgrade by USB
Remove USB device safely
1. Edit Channel
1. Press OK key or
key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted.
The default password is "0000".
2. Press PR+, PR- keys to move the cursor up or
down.
1.1 TV Channel List
1. Press
keys to change page up and page
down.
2. Press PR+,PR- keys to select the program that
you want to play, and then press OK key to select.
WiFi Manager
Weather Forecast
Sudoku
3. Press red colour key to enter move list. In move list
select the program and press red key to mark this
program with the move mark. Press
keys to move
the cursor to the position where you want to locate and
press OK key to confirm.
In move list press green key to group move, press
green key to select several channels and move these
channels at one time.
In move list, select channel and press yellow colour
key to pop up go to list, press number key to input
channel number you want, then the channel will move
to that position.
4. Select the program and press green key to mark
this program with the deletion mark. You can
cancel this mark by pressing OK key again.
Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.
5. Select the program and press yellow key to pop
up a window ask you to input password, the default
password is "0000". After input the right password
program will be marked with the deletion mark. You
can cancel this mark by pressing OK key again.
Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.
6. Press blue colour key to pop up the Rename
window.
In Rename window, press red key to delete
characters, press yellow colour key to switch
between capital letter and lower letter; press green
colour key to switch between English characters
and arabic characters; press
keys to move the
cursor left or right; press numeric keys (0-9) to
input the character, please refer to the down table.
Press yellow colour key to save and exit, or press
blue key to cancel and exit.
Numeric keys
Press numeric key repeatedly, display in circle
1
.,*?!@1
2
ABC2
3
DEF3
4
GHI4
5
JKL5
6
MNO6
7
PQRS7
8
TUV8
9
WXYZ9
0
[space]_-0
If the name is empty, system will pop up a dialogue informing "Name" once yellow
colour key is pressed. Press OK key to close this dialogue.
1.2 Radio Channel List
Same operation as 1.1 TV Channel List, here we don't explain any more.
1.3 Delete All
Move cursor to the Delete All item, and press OK
Key to pop up the dialogue "Warning! Do you really
want to delete all channel?".
Press EXIT key to pop up the dialogue "Are you
sure to save?". Select Yes button and press OK
key to save, or select NO button and press OK key
to exit without saving.
1.4 Favorite
There are 8 favorites group listed in this window.
Press PR+, PR- keys to select one and press OK
key to the Rename window. Since the same
operation as the above the Add Satellite window,
here we don't explain any more.
1.5 System Backup
Move cursor to the System Backup item, and
press OK Key to pop up the dialogue "Backup the
current whole system". Select Yes button and
press OK key to save, or select NO button and
press OK key to exit without saving.
1.6 System Recovery
Move cursor to the System Recovery item, and press
OK Key to pop up the dialogue "Recovery will
overwrite the current system".
Select Yes button and press OK key to save, or select
NO button and press OK key to exit without saving.
2. Installation
1. Press OK key or
key to pop up the "Input
Password" dialogue, you can not enter into the menu
unless the correct password is inputted. The default
password is "0000".
2. Press PR+, PR- keys to move the cursor up or
down.
2.1Installation
Press
keys to select between Motor
Antenna and Fixed Antenna.
Satellite List
1. Satellite list is on the left side of the window. Press
PR+, PR- keys to select the satellite up or down. Press
OK key to select and mark, and you can press OK key
again to cancel the selection and the mark.
2. Press red colour key to pop up the Single
Satellite Search window.
3. Press green colour key to pop up the Multi
Satellite Search window.
4. Press yellow colour key to pop up the Edit
window.
Name: User numeric keys to change the name of
the satellite, please refer to the Edit Channel Name.
Longitude: You can press
keys to switch between east longitude and west
longitude. After pressing OK key, you can use numeric keys to edit the longitude, press
EXIT key or the PR+, PR- keys to exit editing mode. The range of the longitude is from 1to
180 degree. If beyond this range, system will inform you "out of range" when you press
yellow colour key on the RCU.
After setting, press yellow colour key to save and exit, while press blue colour key to exit
without saving.
5. Press blue colour key to pop up the Add/Delete
window. The same operation as the above Edit
Satellite window
6. Press blue colour key and select delete, it will
pop up the dialogue "Are you sure to delete?".
Select Yes button and press OK key to delete the
selected satellite. You can cancel this operation by
pressing OK key at the NO button.
Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed Antenna in the
Antenna Connection window.
1. Satellite: All selected satellites in the satellite list are
displayed in this item.
Press
keys to select the satellite in circle. Or
press OK key to pop up the drop-down list, then select
the desired satellite in the list and press OK key to
confirm.
2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
3. 22K, Polarity: You can press
keys to select in circle.
Part B: Motor
Suppose that you have selected Motor Antenna in
the Antenna Connection window.
1. LNB Type: Select the proper LNB type.
2. Motor Type: Select between DiSEqC1.2 and
USALS. If you select DiSEqC1.2, the following
Local Longitude and Local Latitude items will turn
grey.
3. Delete All: Press OK key to pop up the dialogue
"Are you sure to clear set satellite position of this
tuner?". Press OK key at the Yes button to clear all
the memories about the position of the satellites
that are connected to the current tuner.
4. Motor Setting: Press OK key to the Motor
Setting window.
Satellite: Press
keys to select the satellite
in circle. Or press OK key to pop up the drop-down
list, then select the desired satellite in the list and
press OK key to confirm.
Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position. You
can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position (reference
or from 1to 63) to realize the selected position.
West <Save> East: Press
key to turn east, while press
key to turn west. Press
OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK
key at the Yes button to save the current position, or press OK key at the No button to
cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.
5. Limit Setup: Press OK key to pop up the Limit
Setup window.
Limit Setup: Press
keys to switch among
Disable Limit, East Limit and West Limit.
Limit Setup: Move cursor to the Limit Setup button.
You can press
key to turn west , or press
key
to turn east.
Go to Reference: Press OK key to go to reference. If you select Disable Limit in the
above Limit Setup item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press
keys to
switch between West and East, or press
keys to
switch between North and South. Press OK key to
enter into the editing mode. Use numeric keys (0-9) to
input the longitude or latitude, press MENU key or
EXIT key to exit. The range of the longitude is from 0 to
180,while the range of the latitude is from 0 to 90. If the
inputted value is not in this range, system will pop up a
dialogue "Out of Range" when you exit from this
window. You can press OK key to close this dialogue.
7. Motor Setting: Press OK key to enter into the
Motor setting window.
Satellite, Transponder: Press
keys to
select satellite or transponder, or press OK key to
pop up the drop-down list and select in the list.
In Antenna Setup List
1. Press red colour key to pop up the Single Satellite Search window.
2. Press green colour key to pop up the Multi Satellite Search window.
3. Press blue key to enter TP list.
In TP list press red colour key to pop up the Edit
TP window.
Frequency, Symbol rate: Press
keys to
add or reduce by step one. Or press numeric
keys (0-9) to input the desired value. The range
of the frequency is 3000-13500, while the range
of the symbol rate is 1000~45000. The inputted
value is beyond this range, the value will return
to the origin value.
Polarity: Press
keys to switch between
Vertical and Horizontal.
4. Press green colour key to pop up the Add TP
window. Since the same operation as the above
Edit TP window, here we don't explain any more.
5. Press yellow colour key to pop up dialogue "
Are you sure to delete?". Press OK key at the
Yes button to delete the selected TP, or press
EXIT key to cancel the operation.
6. Press blue colour key to pop up the TP
Search window.
FTA only, Scan Channel, Network Search:
Press
keys to select the proper option.
Press OK key at the OK button to start searching.
2.2 CA
Insert the smart card with the golden chip facing down.
Push the smart card into the CA slot. Only a few
millimetres of the card should be visible outside the slot.
CA Slot
Select CAitem and press OK key, then you will enter
into its sub-menu which consists four items of About CA
Info, Change PIN, Change Signature PIN, Maturity
Level.
2.2.1 About CA Info
In About CA Info sub-menu, you can know the basic
information about this conditional access such as
Card Status, CAS System ID, Interface Version, Card
Number, Number of sessions, Country Indicator, and
Maturity Level.
2.2.2 Change PIN
Changes PIN window is designed for changing the
smart card's PIN, which is required if you want
change the maturity level settings.
In order to change the PIN, you must know the
current PIN also called the old PIN. Input the new
PIN and twice the PIN (New PIN and Confirm PIN
must be the same) your want to set. Move cursor to
OK button and press OK key, and then system will
pop up a dialogue informing you the changing result.
Note that the PIN can only constructed with Arabic numerals.
2.2.3 Change Signature PIN
Do the same way as the above Change PIN.
Note: The signature PIN will be locked after the
three erroneous attempts to enter the correct PIN. If
locked, please call the dealer for help.
2.2.4 Maturity Level
Input the PIN then Move cursor to Select Maturity level,you can select A-Over18,XErotic,G-General audience,PG-Parental Guidance,move cursor to Change Maturity level
button and press OK key,and then system will pop up a dialogue informing you the
changing result.
2.2.5 Subscription Status
Know the detail information of Subscription Status.
2.2.6 Even Status
Know the detail information of Event Status.
2.2.7 Token Status
Know the detail information of Tokens Status.
2.3 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to the
factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel and
exit.
3. System Setup
1. Press OK key or
key to move the cursor to
the right menu.
2. Press PR+, PR- keys to move the cursor up or
down.
3.1 Language
1. Press OK key to enter into the Language
window. Press
keys to select the language
in circle, while press PR+, PR- keys to move the
cursor up or down in circle.
2. Press MENU key or EXIT key to save and exit.
3. The types of the language, pleaser refer to the
configuration of the customer.
3.2 Information
Press OK key to the Information window.
3.3 TV System
Press PR+, PR- key to move the cursor up or down,
while press
keys to change the setting and
the setting will take effect immediately.
1. Video Resolution: Select among 1080p_24,
1080i_25, 1080i_30, 1080p_50, 720p_60, 720p_50,
576p, 576i, 480p, 480i, By Native TV and By source .
2. Aspect Mode: Select among Auto,4:3LB, 4:3PS
and 16:9 and Auto.
3. Digital Audio Out: Select between LPCM Out and BS Out.
3.4 Display Setting
1. Brightness: Press
key to select from 0-
100.
2. Contrast: Press
key to select from 0-100.
3. Saturation: Press
key to select from 0-
100.
4. Hue: Press
key to select from 0-100.
5. Sharpness: Press
key to select from 0-10.
3.5 Local Time Setting
1. Summer Time: Select between ON and OFF.
"OFF" delegates the normal time. If select ON,
time will add one hour.
2. GMT Offset: When select "ON" in GMT Usage
item, system will get the date and time
information from the screen automatically. Date
and Time two items will turn grey.
Select the
proper option in the GMT Offset item. The default
setting is GMT ON.
3.Date, Time: When select "OFF" in GMT Usage, Date and Time two items take
effect, while GMT Usage turns grey. Use numeric keys to input the desired value.5.
After setting, press MENU key or EXIT key to exit and save. If the value is invalid,
system will inform "Invalid input! Continue to edit?". Press OK key at the Yes button
to continue the modification, or press OK key at the No button to exit without saving.
3.6 Timer Setting
If there is no program, you can not enter into this
window. There are 8 timers that can be set.
Select Timer up or down, and press OK key to
enter into the setting window.
1. Timer mode: The default mode is off. You can
set the timer once and daily.
2. Timer Service: Select between Channel or
Record.
3. Wakeup Channel: Press
key to select
channel
3. Wakeup Date, On Time: Use numeric keys to
input the valid date.
Duration: Set the gap time. After waking up, system will power off automatically
after the duration time.
3.7 Parental Lock
Before entering into the Parental Lock window, you
need input the correct password. The default
password is 0000.
1. Menu Lock: Press
keys to select between
Off and On. If select "On" , you can not enter into the
window before entering the password.
2. Channel Lock: Press
keys to select
between Off and On. The default value is On.
If select "On", you can not view the locked channel set in Chanel List Edit window until
you have inputted the correct password.
3. New Password: Use numeric key (0-9) to input the new password.
4. Confirm Password: Input the new password once again. Confirm password must be
the same as the New password. System will inform you "Change password successfully!"
while they are the same, or inform you to input the password of Confirm password once
again when they are not the same.
3.8 OSD Setting
1. OSD Timeout: Press
keys to select from
1 to 10 by step1. The default values is 5.
2. OSD Transparency: Press
keys to select
among Off, 10%, 20%, 30%, 40%. The default
option is Off.
Press MENU or EXIT key to save and exit.
3.9 Other
1. LNB Power: Select between Off and On.
2. Channel Play Type: Select among All, Free,
Scramble.
3. Channel Change: Select between Black Screen
and Freeze.
4. Auto Standby: Select between On and Off.
4. Tools
1. Press OK key or
key to pop up the "Input
Password" dialogue, you can not enter into the
menu unless the correct password is inputted. The
default password is 0000.
2. Press PR+, PR- keys to move the cursor up or
down.
4.1 Network Local Setting
DHCP: Select between ON and OFF, when it ON, the
IP Address, Subnet Mask and Gateway item will turn
gray, you can not edit them.
Press number 0-9 the input the address.
4.2 WiFi Manager
Insert Wifi equipment first, then search available Enter net signal , input the password to
connect with network.
4.3 Upgrade by Network
1. Protocol: Select between HTTP and FTP.
2. URL Type: Select between number and string.
3. URL: press number key 0-9 to input.
4. User: Press number key 0-9 to input the user name.
5. Press number key 0-9 the input the password.
6. Press OK key on star button to begin updating
Press green key to delete the number or characters
and press red key to switch the input mode.
4.4 Weather Forecast
Press green key to add city
Press yellow key to delete city
Press red key to update
4.5 RSS Reader
RSS Channel list is on the left side of window
RSS News list is on the right side of window
Press PR+, PR- key to select channel you wanted
Press red key to update
Press green key to add channel
Press yellow key to delete channel
Press blue key to edit channel
5. Game
1. Press OK key or
key to enter into the game.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Select the game that you want to play and press
OK key to enter into the window.
6. USB
6.1 Media Player
USB menu will be automatically shown when
insert U disk to USB port except auto scan, multi
picture, upgrade. Or open USB menu according
to Menu -> USB-> Media Player. Press OK to
enter into this window.
USB menu will be disabled when no USB device
is plugged. Media Play List will not be saved
when USB plug out or standby or power off.
Go into sub-directory when press ok key in the file directory, play the selected file
when scroll bar is on the file, automatic return USB menu after play is over.
In edit window:
Red key: Press red key to enter the rename window,
you can rename the file by press number 0-9 on RCU.
Green key: Press green key to enter the copy window,
press
key to select the place you want to copy
to, and press green key to begin copying.
Yellow key: Press yellow key to add the delete symbol
on your selected file, press yellow key again
the symbol will disappeared. Press OK key on the file with delete symbol, it will pop
up a dialogue: " Are you sure to delete ?" Select YES to delete and select NO to quit
without delete the file. and press EXIT key to quit without delete the file.
Blue key: Press blue key to enter the New Folder window, you can press number 09 to edit.
In music list
Press number key 1 to display the Sort window.
Press number key 2 to select the repeat mode.
The function of colour key is the same as Color key
operation
In video list
Press number key 1 to display the Sort window.
The function of colour is the same as Color key
operation
In record list
Red key: Press red key to enter the rename window,
you can rename the file by press number 0-9 on RCU
Green key: Press green key to lock the file you selected
Yellow key: Press yellow key to delete the file you
selected.
6.2 PVR Storage Information
Show you the information in windows as besides.
Yellow key: Press yellow key to format the disk
Blue key: Press blue key to pop up DVR Set windw.
6.3 PVR Setting
1. Time shift: Select between Off and On.
2. Timeshift to Record: Select between On and Off.
6.4 Upgrade by USB
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between allcode, maincode, defaultdb, userdb and Dump. When
users switch the upgrade mode, Upgrade File will show the corresponding file
according to the table below:
Upgrade Mode
All code :
File feature
File named as "*.abs"
Main Code:
File named as
Radio back:
File named as "*.abs",
*.abs
the picture will be used
as both radio back and
menu back
Default db:
File named as "*.abs"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
6.5 Remove USB device safely
Press OK on this item it will pop up a dialogue:"You can safely remove USB device
now! ", then you can move your USB device safely.
26
7. Hot Key
7.1 Info
Press INFO key to pop up the Info bar.
Press INFO key again to pop up the program guide of
the current program.
7.2 EPG
Press EPG key to enter into the EPG window.
1. Press PR+, PR-,
keys to select up or down,
left or right.
2. Press red colour key to pop up the Time Bar
window. Press PR+, PR- keys to select up or down,
while press
keys to select left or right in the
time bar.
: Press OK key at this button to return to the
EPG window.
: Press OK key at this button to move the cursor
to the current time line.
: Press OK key to push the time forward or
backward by half an hour.
: Press OK key to push the time forward or
backward by half an hour.
: Press OK key to push the time forward or
backward by a day.
3. Detail Information: In the EPG window, press PR+, PR-
keys to select the
channel and program, and press OK key to know the detail information of the
current program.
4. Press green colour key to enter into the Timer window. You can add the current
program to the Timer. If 8 timers are already yet, system will inform you "Timer is
full!'.
7.3 Find
Press FIND key on to pop up the Find window.
Use numeric keys to enter into the character and
use the colour keys to realized the corresponding
operation.
27
7.4 Number
Use the numeric keys (0-9) to input the number of the desired channel. If the
inputtednumber is beyond the valid channel number, system will "No such a
channel" and press OK key to close this message.
7.5 TV/RADIO
In normal mode, press TV/RADIO key to switch between TV mode and Radio mode.
7.6 Up/Down (Channel Change)
Press PR+, PR- keys to change the channel up or down. If in the all satellites group,
you can select channel in all searched channels. If in the specific satellite, only can
select channel in the satellite group.
7.7 Left/Right (Volume+/-)
Press
while press
keys to change the volume. Press
keys to decrease the volume,
keys to increase the volume.
7.8 Mute
Press
key to turn off the volume. You can press
the volume, or press
key once again to restore
keys to increase the volume.
7.9 Pause
During the viewing, you can press PAUSE key to stop the picture while the volume
continues. You can play the picture by pressing PAUSE key once again.
7.10 OK
1. During the viewing or listening, press OK key to
pop up the TV program list or the Radio program list.
2. Press PR+,PR- keys to select the channel up or
down, and then press OK key to play this channel
in full-screen.
3. Press
keys to select the satellite.
4. Press red key to switch among Free, scramble and HD channels list, press green key to
enter favorite list, you can add channels to different FAV group in this list, there are 8 FAV
groups. Press different color key to mark the channel with different FAV group symbol.Press
yellow key to enter edit program mode, press blue key to pop up A-Z window.
28
Press F1 key to pop up the Sort drop-down list.
Name(A-Z): The ascending order, omitting the $
character, the number is ahead, then the capital letter,
at last the lowercase.
Name (Z-A): The opposite order of the above Name
(A-Z).
Free/Scramble: All FTA programs are listed ahead,
while all scrambled programs are listed last.
Lock: all locked programs are listed at the last.
Press F2 key to pop up TP list, press FIND key to pop up FIND window, press EPG key to
pop up CA type list.
7.11 Audio
1. Press
key to enter into the Audio window.
2. Press
keys to select among Left, Right,
Stereo, and Mono.
3. Changing the audio mode is only connected with
the current channel, not all the channels.
4. Press MENU or EXIT key to close this window.
7.12 Recall
Press
key to switch the current channel to the previous channel.
7.13 FAV
1. Press FAV key to pop up the favourite group
window.
2. Press
keys to select the favorite group.
Press PR+, PR- keys to select the channel up or
down. Press OK key at the selected channel to
view it in full-screen. Press MENU or EXIT key to
exit.
3. If there is no favorite channel, system will inform
" No FAV Channel!" when you press FAV key.
7.14 Teletext
Press TXT key to open the teletext on the screen. If there is no teletext, system will inform
"No Teletext Data". Press EXIT key to exit.
7.15 Zoom
1. Press ZOOM key to switch among Zoom*1, Zoom*2, Zoom*3, Zoom*4, Zoom*5,
Zoom*6, Zoom*8, Zoom*12, Zoom*16.
2. In zoom mode, press PR+, PRkeys to move the cursor up, left, right, down.
3. Press MENU or EXIT key to exit
29
Problem
Possible causes
What to do
The display on the front
panel does not light up.
Main cable is not connected.
Check that the main cable is plugged into
the power socket.
No sound or picture, but the
front panel shows red light.
The receiver is in standby mode.
Press the standby button.
The satellite dish is not pointing at the
satellite.
Adjust the dish. Check the signal
level in the Antenna Setup menu.
No signal or weak signal.
Check the cable connections, LNB and
other equipment connected between the
LNB and the receiver, or adjust the dish.
The satellite dish is not pointing at
the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to the LNB
input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor too high.
Change to an LNB with lower noise
factor.
The LNB is faulty.
Change the LNB.
Battery exhausted.
Change the batteries.
RCU is incorrectly aimed.
Aim RCU at the receiver, or check that
nothing blocks the front panel.
No sound or picture.
Bad picture / blocking
error.
The RCU is not working.
Note : If you have tried all of the actions suggested above, without solving the
problem, please contact your dealer or service provider.
30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising