The most variable Modular Extender family
The most variable
Modular Extender family
Modular Extender family
■■ Introduction................................................................................. 3
Configuration
■■ MODEX frames............................................................................ 4
■■ MODEX modules......................................................................... 5
Configuration / Media connectors
■■ OPTS & OPTM Media connectors............................................... 6
■■ TPS Media connectors................................................................ 7
Configuration / Video & Audio modules
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
MODEX-AV-HDMI-DVI-4K-IM.................................................... 8
MODEX-AV-HDMI-DVI-IM.......................................................... 9
MODEX-AV-DVI-IM..................................................................... 9
MODEX-AV-3GSDI-IM.............................................................. 10
MODEX-AV-DVIDL-IM.............................................................. 11
MODEX-AV-DP-IM.................................................................... 11
MODEX-AV-HDMI-4K-OM........................................................ 12
MODEX-AV-HDMI-DVI-4K-OM................................................. 12
MODEX-AV-DVI-4K-OM........................................................... 13
MODEX-AV-HDMI-OM.............................................................. 13
MODEX-AV-DVI-OM................................................................. 14
MODEX-AV-DVIDL-OM............................................................. 14
MODEX-AV-DP-OM.................................................................. 15
Configuration / Interface modules
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
MODEX-IF-ETH......................................................................... 16
MODEX-IF-2ETH-RS232........................................................... 17
MODEX-IF-4ETH....................................................................... 17
MODEX-IF-ETH-ECN................................................................ 18
MODEX-IF-AUDIN..................................................................... 18
MODEX-IF-AUDOUT................................................................. 19
MODEX-IF-AUD........................................................................ 19
MODEX-IF-RS232-IR................................................................ 20
MODEX-IF-RS232..................................................................... 20
MODEX-IF-2xRS232................................................................. 21
MODEX-IF-RS232-RS422......................................................... 21
■■
■■
■■
■■
■■
Summary................................................................................... 22
How to order a MODEX?.....................................................24
25G HYBRID Integrated system................................................. 25
USB KVM standalone application diagram................................ 26
Accessories............................................................................... 26
2
www.lightware.eu
Modular extender family
Application specific modular extenders
with various video, audio, Ethernet,
USB and other I/O modules.
Digital & analog video
Digital video
Digital & analog audio
Digital & analog audio
Ethernet
Single fiber or single CATx
Ethernet
USB KVM
USB KVM
IR & CEC
IR & CEC
RS-232 & RS-422
RS-232 & RS-422
Lightware Visual Engineering proudly introduces the MODEX family, the
world’s best and fastest modular extenders supporting all the AV and
Broadcast industry’s formats. MODEX (Modular Extender) offers a full
range of modular transmitters and receivers extending both digital and
analog video and audio, USB KVM, Ethernet and control signals over a
single fiber or CATx cable.
The technology built into the MODEX family steps over many standard
limitations allowing 30 meters DVI cable on input, Advanced EDID
Management, Pixel Accurate Reclocking, LAN, RS-232, RS-422 control
functions, USB K+M, remote powering and more.
Step1: Choose a MODEX frame
Step2: Choose a fiber or CATx Media connector
Step3: Select one Video & Audio module
Step4: Select two Interface modules
To customize a MODEX is really easy and simple. There are 4 steps to
be made. The first is to choose the right frame. After the selection of the
frame type the next step is to find the required Media connector followed
by the choice of any Video & Audio and Interface modules needed for
the configuration. The MODEX modules are not hot swappable and are
fixed configurations, the ordered MODEX is custom manufactured by
Lightware.
MODEX Graphical User Interface
Lightware’s MODEX Modular Extenders have their own built-in websites.
After a MODEX is connected and a browser launched the user meets the
MODEX Graphical User Interface. This GUI allows the user to control
both the MODEX transmitters and receivers in a very easy and user
friendly way as the GUI is simple, smart and intuitive. To find out more
please read the Quick Start Guide which is a detailed description of this
software.
www.lightware.eu
3
MODEX frames
MODEX transmitters and receivers are available in half rack unit size.
On the front panel there is a 2x16 character LCD display, an additional
10/100 Mbps Ethernet port (with full functionality, but can be used as a
control interface) and USB KVM connectors (transmitter has one USB-B
for the computer; receiver has two USB-A connectors for the keyboard
and mouse). Keyboard and mouse functions are emulated by the extender
and no USB enumeration occurs while operator switching. A computer is
not aware when a keyboard or mouse has been changed.
The 3/4 and full rack unit versions are under development as well which
will be able to handle more modules and will be power redundant.
MODEX-TX specifications
Ethernet
RJ-45 connector
General (for Half RU extender):
USB KVM
USB-B female connector
Dimensions:
221 W x 240 D x 42,5 H mm
Front panel buttons:
Yes
Weight:
1850 g (excluding all modules)
Front panel LCD:
Yes, 2 x 16 characters
Power consumption:
WEB:
Built-in website (TCP/IP Ethernet)
6.5 W (typical) 8.6 W (max) without modules
15 W (typical) 25 W (max) with modules
EDID management:
119 factory and 31 user programmable EDID
ESD protection:
IEC61000−4−2 Level 4
EDID emulation:
256-Byte Extended EDID v1.3
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
Compliance:
CE
Warranty:
3 years
MODEX-RX specifications
Ethernet
RJ-45 connector
General (for Half RU extender):
USB KVM
2 x USB-A female connector
Dimensions:
221 W x 240 D x 42,5 H mm
Front panel buttons:
Yes
Weight:
1850 g (excluding all modules)
Front panel LCD:
Yes, 2 x 16 characters
Power consumption:
WEB:
Built-in website (TCP/IP Ethernet)
6.5 W (typical) 8.6 W (max) without modules
15 W (typical) 25 W (max) with modules
EDID management:
119 factory and 31 user programmable EDID
ESD protection:
IEC61000−4−2 Level 4
EDID emulation:
256-Byte Extended EDID v1.3
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
Compliance:
CE
Warranty:
3 years
4
www.lightware.eu
Media connectors
MODEX modules
The half unit extender allows a Media connector module, one Video
& Audio module and two Interface modules (each can be the same or
different types). By choosing the modules you choose signal types your
application requires these will be transferred by the MODEX extender pair
or end point transmitter or receiver.
Media connector
Determines the type of signal transportation
Interface modules
Wide variety of auxiliary signal type transmission
Video & Audio module
Various video and audio connection
www.lightware.eu
5
Built-in power supply
with IEC connector
Media connectors
Neutrik
OpticalCON
PowerCON
AC inlet
Neutrik
OpticalCON
MODEX includes a family of long distance transmitters and receivers for
sending and receiving video, audio, RS-232 and IR control, USB KVM and
Ethernet over a single fiber or CATx cable. The Media connector is the heart
of the MODEX because it determines the type of signal transportation.
OPTS & OPTM Media connectors
MODEX-CON-OPTS/M-NT
Part No: see the Connectors table
The OPTS and OPTM Media connectors give optical transmission over
a single Singlemode (OPTS) or Multimode (OPTM) fiber. Lightware
provides several fiber connector types to choose the best option for your
application such as Neutrik OpticalCON, industrial grade LC ODVA,
ST, SC, HF4, EBCM, EBCJ or LEMO. For cost effective smart solutions
Lightware introduced the LC breakout Media connector which allows
the user to connect another MODEX extender with a patch cable at the
end point. It means you can send the signals for two MODEXs over a
single Neutric OpticalCON duo cable. There are also two optional power
connectors provided – to see the available combinations please check
the ‘Optional fiber and power connectors’ chart. The MODEX OPTx series
provide a reliable optical connection powered by an internal power supply.
SC optical
connector
MODEX-CON-OPTS/M-SC
Industrial sealed LC ODVA
compliant optical connector
Connectors
Mod.
No.
OPTS
(RX/TX)
OPTM
(RX/TX)
Fiber connector
Power
connector
Part
number
227
Neutrik OpticalCON DUO
IEC C14 AC
9161 0227
231
Neutrik OpticalCON DUO
PowerCON AC 9161 0231
229
LC ODVA
IEC C14 AC
9161 0229
235
ST
IEC C14 AC
9161 0235
237
SC
IEC C14 AC
9161 0237
233
HICON HI-FIBER4
IEC C14 AC
9161 0233
223
Expanded Beam Mini (HMA)
IEC C14 AC
9161 0223
207
Expanded Beam Junior (HMA)
IEC C14 AC
9161 0207
239 (TX) SMPTE 304M HDTV socket
IEC C14 AC
9161 0239
240 (RX) SMPTE 304M HDTV plug
IEC C14 AC
9161 0240
241
Neutrik OpticalCON DUO
and LC
IEC C14 AC
9161 0241
228
Neutrik OpticalCON DUO
IEC C14 AC
9161 0228
232
Neutrik OpticalCON DUO
PowerCON AC 9161 0232
230
LC ODVA
IEC C14 AC
9161 0230
236
ST
IEC C14 AC
9161 0236
238
SC
IEC C14 AC
9161 0238
234
HICON HI-FIBER4
IEC C14 AC
9161 0234
226
Expanded Beam Mini (HMA)
IEC C14 AC
9161 0226
210
Expanded Beam Junior (HMA)
IEC C14 AC
9161 0210
242
Neutrik OpticalCON DUO
and LC
IEC C14 AC
9161 0242
MODEX-CON-OPTS/M-ODVA
Neutrik
OpticalCON
MODEX-CON-OPTS/MNT-BRK-LC
HICON
HI-FIBER4
MODEX-CON-OPTS/M-HF4
OPTS: singlemode MODEX Media connector
OPTM: multimode MODEX Media connector
Power cable with the right male connector for the Media connector
module is provided.
6
LC optical
connector
www.lightware.eu
MODEX-CON-OPTS/M-NT-PCN
ST optical
connector
MODEX-CON-OPTS/M-ST
SMPTE
304M HDTV
MODEX-CON-OPTS-LEMO
Expanded Beam
Junior (HMA)
MODEX-CON-OPTS/M-EBCJ
Media connectors
Module specifications
Module
number
Power consumption:
Fiber specifications
Weight:
Link speed:
6,25 Gbps
Singlemode fiber wavelength:
1310, 1490, 1550 nm
207/210
380g
Multimode fiber wavelength:
850, 1310, 1550 nm
223/226
335g
Singlemode extension distance:
10 km (32800 ft)
227/228
285g
Multimode extension distance:
300 m (1000 ft)
229/230
295g
Optical transmission channel 1:
OPTS/OPTM connection
231/232
290g
Optical transmission channel 2:
USB 2.0 transmission**
OPTS/
233/234
OPTM
235/236
0,75 W typ, 1.1 W max.
310g
**under development
270g
Video specifications:
237/238
270g
Supported video resolutions:
Up to 4K (30 Hz, 4:2:2, 297 MHz, 24 bit)
239
315g
Max pixel clock:
297 MHz
240
390g
Frame delay:
No delay
241/242
300g
Video signal latency:
Approx. 3 lines
Audio specifications:
Embedded audio:*
8 channel PCM or HBR compressed
Return AUX:
4 channel PCM or 5.1 compressed
Forward audio:
2 channel PCM or 5.1 compressed
Return audio:
2 channel PCM or 5.1 compressed
*configurable, the embedded audio in the video stream can be switched to any other audio.
Ethernet specifications:
Ethernet:
10/100 Mbit/s
USB specifications:
USB standards:
Only HID devices, Smart Card
USB HUB:
Not supported
Device number:
2 USB HID devices
TPS Media connector
Under development
The TPS Media connector (MODEX-TPS series) provides fully functional
transmission over a CAT5/6/7 twisted pair cable, equipped with Neutrik
EtherCON connector that ensures a reliable RJ-45 connection even in
rental/staging environments. Common RJ-45 connectors can also
be used with Ethercon. MODEX-TPS is powered by an external power
supply over universal power adaptor DC 48V.
Neutrik EtherCON
connector
Power adaptor with
screw DC plug
TPS twisted pair input
www.lightware.eu
7
4K UHD HDMI and DVI input module
Video & Audio modules
MODEX-AV-HDMI-DVI-4K-IM
Various video formats are supported by the MODEX Video & Audio
modules: video could be DisplayPort 1.1, HDMI 1.4 with 3D, Dual-Link
DVI, SDI, 3G-SDI and analog VGA, Interlaced Composite Video. No
matter, what kind of video format you have, your pixels will be extended
perfectly. The video format conversion is automatic if the two ends have
different modules. The Video & Audio modules are also capable of
transmitting audio. The source may be external S/PDIF, RCA, XLR or
the embedded sound present in different video signals. Embedding and
extracting audio or transmitting in both directions simultaneously is also
supported.
Part No: 9161 0410
Features
■■ HDMI 1.4, DVI and HDCP 1.4 compliant
■■ Resolution up to 3840x2160@30Hz, 1600x1200@60Hz
■■ Supports any 3D formats
HDMI 1.4 input module is a compliant receiver of HDMI 1.4 and DVI
signals with HDCP with the resolution up to 4K. The input has 30 m
copper cable compensation and the signal can be switched between
the HDMI and DVI connector (simultaneously only one can be used).
Advanced professional functions such as HDCP enable/disable mode
and Advanced EDID Management functions provide the highest level of
setup and usage.
Specifications
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max cable length:
30m / 22 AWG
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Data rate:
9 Gbps
Max pixel clock:
300 MHz
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
105 g
Power consumption:
2.75 W (max)
Connectors:
DVI-D, HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
8
www.lightware.eu
Video & Audio input modules
HDMI 1.3 and DVI input module
DVI input module
MODEX-AV-HDMI-DVI-IM
MODEX-AV-DVI-IM
Part No: 9161 0407
Part No: 9161 0433
Features
Features
HDMI 1.3 input module is a compliant receiver of HDMI 1.3a and DVI signals
with HDCP compliance. The input has 30 m copper cable compensation
and the signal can be switched between the HDMI and DVI connector
(simultaneously only one can be used). Advanced professional functions such
as HDCP enable/disable mode and Advanced EDID Management functions
provide the highest level of setup and usage.
DVI input module is a compliant receiver of HDMI 1.3a and DVI signals
with HDCP compliance. The input has 30 m copper cable compensation.
Advanced professional functions such as HDCP enable/disable mode
and Advanced EDID Management functions provide the highest level of
setup and usage.
Specifications
Specifications
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36-bit deep color support
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36-bit deep color support
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max (in/out) cable length:
30 m / 22 AWG
Max (in/out) cable length:
30 m / 22 AWG
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
Total max 6,75 Gbps
Data rate:
Total max 6,75 Gbps
Max pixel clock:
225 MHz
Max pixel clock:
225 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video standards: DVI 1.0, HDMI 1.3a
3D support:
No
3D support:
No
Embedded audio /
Return audio:
Yes / No
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID management
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.3
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
105 g
Weight:
95 g
Power consumption:
1,3 W (typ) 2,2 W (max)
Power consumption:
0,4 W (typ) 0,7 W (max)
Connectors:
DVI-D, HDMI
Connectors:
DVI-D
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
9
3G-SDI input module with 2 SDI loop out
MODEX-AV-3GSDI-IM
Part No: 9161 0426
Supported resolutions
Signal
type
Resolution Refresh
ColorSpace
Sampling
Color
depth
720p
50 / 59,94 / 60 YCbCr
422
10
1080i
50 / 59,94 / 60 YCbCr
422
10
1080sF
25 / 29,97 / 30 YCbCr
422
10
1080p
23,98 / 24 /
YCbCr
25 / 29,97 / 30
422
10
50
YCbCr / RGB
444
10
59,94
YCbCr / RGB
444
10
60
YCbCr / RGB
444
10
50
YCbCr
422 / 444
12
50
YCbCr / RGB
444
10
50
RGB
444
12
59,94
YCbCr
422 / 444
12
59,94
YCbCr / RGB
444
10
59,94
RGB
444
12
60
YCbCr
422 / 444
12
60
YCbCr / RGB
444
10
60
RGB
444
12
25
YCbCr
422 / 444
12
25
RGB
444
10
29,97
YCbCr
422 / 444
12
29,97
RGB
444
10
30
YCbCr
422 / 444
12
Supported video standards: SD-SDI, HD-SDI, 3G-SDI
30
RGB
444
10
3D support:
No
23,98
YCbCr / RGB
444
10
Embedded audio:
Yes
24
YCbCr / RGB
444
10
EDID emulation:
No
25
YCbCr
422 / 444
12
25
YCbCr / RGB
444
10
Audio capability:*
4 stereo PCM
25
RGB
444
12
Weight:
120 g
Power consumption:
0,7 W (typ) 1,1 W (max)
29,97
YCbCr
422 / 444
12
Connectors:
3 x BNC (1 x in, 2 x loop out)
29,97
YCbCr / RGB
444
10
ESD protection:
IEC61000−4−2 Level 4
29,97
RGB
444
12
Operation temperature:
0°C - +50 °C
30
YCbCr
422 / 444
12
Storage temperature:
-20°C - +85 °C
30
YCbCr / RGB
444
10
Humidity:
10% to 90% non-condensing
30
RGB
444
12
Part number:
9161 0426
50 / 59,94 / 60 YCbCr
422
10
1080i
50 / 59,94 / 60 YCbCr
444
10
1080sF
29,97 / 30
YCbCr
444
10
1080p
50 / 59,94 / 60 YCbCr
422
10
HD-SDI
Features
■■ Accepts SD-SDI, HD-SDI and 3G-SDI video signals
■■ SDI multichannel audio de-embedding
■■ Auto detects input formats
720p
3G-SDI input accepts SD-SDI, HD-SDI and 3G-SDI video signals with
embedded audio on BNC connectors. SDI input signals are automatically
equalized and reclocked. The module has two loop outputs for further
transmission of the input signal.
3G-SDI
(3G-A)
1080i
Specifications
Max resolution:
1920 x 1080p @ 60Hz
3G-SDI Level A: 1920x1080p YCbCr 4:2:2
3G-SDI Level B: 1920x1080p YCbCr 4:2:2
Max input cable length:
130 m @ 3G-SDI
Color depth:
20 bit
Color space:
10 bit / Y, 10 bit / CbCr, 12 bit RGB
Frame delay:
No delay
Data rate:
Total max 2,97 Gbps
1080sF
3G-SDI
(3G-A)
1080p
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
10
3G-SDI
(3G-B)
www.lightware.eu
Video & Audio input modules
Dual-Link DVI input module
DisplayPort 1.1 input module
MODEX-AV-DVIDL-IM
MODEX-AV-DP-IM
Part No: 9161 0401
Part No: 9161 0419
Features
Features
Dual-Link DVI input module was designed for higher video resolutions
such as 2560 x 1600. It incorporates Advanced EDID Management and
HDCP encryption besides Lightware’s Pro series technologies.
Input module for DisplayPort 1.1a video signals extends high resolution
video and embedded audio. The interface’s 10.8 Gbps bandwidth is
capable of transmitting 2560 x 1600 pixel resolution video with full
support of content protection (HDCP).
Specifications
Specifications
■■
■■
■■
■■
■■
■■
■■
■■
Pro series Dual-Link DVI input module
Resolution up to 2560 x 1600, 1920x1200@120Hz
HDCP 1.1 compliant
Advanced EDID Management
Accepts DisplayPort 1.1a signals with embedded audio
Up to 2560 x 1600 pixel resolution
Audio embedding, de-embedding
HDCP 1.3 compliant
Max resolution:
2560x1600 @ 60Hz
1920x1200 @ 120Hz
Max resolution:
2560x1600 @ 60Hz
4096x2160 @ 24Hz
Max (in/out) cable length:
20 m / 22 AWG
Max DP cable length:
15 m / 24 AWG
Color depth:
8 bit per color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB
Color space:
Frame delay:
No delay
Data rate:
Total max 9,9 Gbps
RGB/YUV (4:4:4) – 10-bit color
YUV (4:2:2/4:2:0) – 12-bit color
RGB (4:4:4) to YUV (4:4:4)
Max pixel clock:
165 MHz
Frame delay:
No delay
Supported video formats:
DVI 1.0
Data rate:
Total max: 10.8 Gbps (1.62/2.7 Gbps/lane)
3D support:
Yes
Embedded audio /
Return audio:
No / No
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
Supported video standards: DP 1.1a compliant
3D support:
Yes
Embedded audio
Yes
EDID emulation:
Yes, Advanced EDID management
1.1
HDCP compliancy:
1.3
Audio capability:
Not supported
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
100 g
Weight:
95 g
Power consumption:
1,4 W (typ) 2 W (max)
Power consumption:
0,8 W (typ) 2,5 W (max)
Connectors:
DVI-D
Connectors:
Standard DisplayPort gold plated connector
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
11
4K UHD HDMI output module
4K UHD HDMI and DVI dual output module
MODEX-AV-HDMI-4K-OM
MODEX-AV-HDMI-DVI-4K-OM
Part No: 9161 0416
Part No: 9161 0439
Features
Features
■■ HDMI 1.4, DVI 1.0 and HDCP 1.4 compliant
■■ Resolution up to 3840x2160@30Hz, 1600x1200@60Hz
■■ Supports any 3D formats
■■ HDMI 1.4, DVI and HDCP 1.4 compliant
■■ Resolution up to 3840x2160@30Hz, 1920x1080p@120Hz,
1600x1200@60Hz
■■ Supports any 3D formats
Video output module for HDMI 1.4 can output HDMI 1.4 and DVI signals
with HDCP compliancy. The module is compatible with deep color
formats and features embedded audio as well.
HDMI 1.4 output module is a compliant transmitter of HDMI 1.4 and
DVI signals with HDCP with the resolution up to 4K. The same signal
can be sent on both the HDMI and DVI connector simultaneously.
Advanced professional functions such as HDCP enable/disable mode
and Advanced EDID Management functions provide the highest level of
setup and usage.
Specifications
Specifications
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
9 Gbps
Max pixel clock:
300 MHz
Max pixel clock:
300 MHz
Supported video standards: DVI 1.0, HDMI 1.4
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
Embedded audio /
Return audio:
Yes / Yes (on HDMI connector)
EDID emulation:
Yes, Advanced EDID management
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.4
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Video test pattern generator
480p, 576p or 720p with different patterns
(both outputs)
Weight:
95 g
Power consumption:
0.38 W (typ), 2.88 W (max)
Connectors:
HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
110 g
Power consumption:
0.38 W (typ), 2.88 W (max)
Connectors:
DVI-D, HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
12
www.lightware.eu
Video & Audio output modules
4K UHD DVI output module
HDMI 1.3 output module
MODEX-AV-DVI-4K-OM
MODEX-AV-HDMI-OM
Part No: 9161 0436
Part No: 9161 0413
Features
Features
■■ HDMI 1.4, DVI and HDCP 1.4 compliant
■■ Resolution up to 3840x2160@30Hz, 1920x1080p@120Hz,
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36-bit deep color support
1600x1200@60Hz
■■ Supports any 3D formats
Video output module for HDMI 1.4 with DVI connector which can output
HDMI 1.4 and DVI signals with HDCP compliancy. The module is
compatible with deep color formats and features embedded audio as well.
Video output module for HDMI 1.3 can output HDMI and DVI signals
with HDCP compliancy. The module is compatible with deep color
formats and features embedded audio as well.
Specifications
Specifications
Max resolution:
1600x1200 @ 60Hz 36bit
3840x2160 @ 30Hz 24bit
1920x1080p @ 120Hz 24bit
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Color depth:
24, 30, 36 bit deep color
Color depth:
24, 30, 36 bit deep color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB, YCbCr 4:4:4/4:2:2
Frame delay:
No delay
Frame delay:
No delay
Data rate:
9 Gbps
Data rate:
Total max 6,75 Gbps
Max pixel clock:
300 MHz
Max pixel clock:
225 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video standards: DVI 1.0, HDMI 1.4
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.4
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
100 g
Power consumption:
0.38 W (typ), 2.88 W (max)
Connectors:
DVI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
3D support:
No
Embedded audio /
Return audio:
Yes / No
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
95 g
Power consumption:
0,4 W (typ) 0,7 W (max)
Connectors:
HDMI
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
13
DVI output module
Dual-Link DVI output module
MODEX-AV-DVI-OM
MODEX-AV-DVIDL-OM
Part No: 9161 0430
Part No: 9161 0404
Features
Features
Video output module with DVI connector. It can output HDMI and DVI
signals with HDCP compliancy. The module is compatible with deep
color formats and features embedded audio as well.
Dual-Link DVI video output module supports up to 2560 x 1600 pixel
resolution video signals with HDCP compliancy. The DVI output can
power external peripheral devices via +5 V pin up to 500 mA current.
Specifications
Specifications
■■ HDMI 1.3, DVI and HDCP 1.3 compliant
■■ 36-bit deep color support
■■ Pro series Dual-Link DVI output module
■■ Resolution up to 2560 x 1600, 1920x1200@120Hz
Max resolution:
1920x1200 @ 36bit
1600x1200 @ 24bit
Max resolution:
2560x1600 @ 60Hz
1920x1200 @ 120Hz
Color depth:
24, 30, 36 bit deep color
Color depth:
8 bit per color
Color space:
RGB, YCbCr 4:4:4/4:2:2
Color space:
RGB
Frame delay:
No delay
Frame delay:
No delay
Data rate:
Total max 6,75 Gbps
Data rate:
Total max 9,9 Gbps
Max pixel clock:
225 MHz
Max pixel clock:
165 MHz
Supported video standards: DVI 1.0, HDMI 1.3a
Supported video standards: DVI 1.0
3D support:
No
3D support:
Yes
Embedded audio /
Return audio:
Yes / No
Embedded audio /
Return audio:
No / No
EDID emulation:
Yes, Advanced EDID management
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.3
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Audio capability:
Not supported
Weight:
95 g
Weight:
100 g
Power consumption:
0,4 W (typ) 0,7 W (max)
Power consumption:
3,5 W (typ) 3,5 W (max)
Connectors:
DVI-D
Connectors:
DVI-D
ESD protection:
IEC61000−4−2 Level 4
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
14
www.lightware.eu
Video & Audio output modules
DisplayPort 1.1 output module
MODEX-AV-DP-OM
Part No: 9161 0422
Features
■■
■■
■■
■■
■■
Transmits DisplayPort 1.1a signals with embedded audio
Up to 2560 x 1600 pixel resolution,
Audio embedding, de-embedding
HDCP 1.3 compliant
Compatible with Apple Cinema Display, 27” and 30” LCD displays
The DisplayPort output module transmits DisplayPort 1.1a high
resolution video and embedded audio. The interface’s 10.8 Gbps
bandwidth is capable of transmitting 2560 x 1600 pixel resolution video
with full support of content protection (HDCP).
Specifications
Max resolution:
2560x1600 @ 60Hz
4096x2160 @ 24Hz
Color depth:
24,30,36 bit deep color
Color space:
RGB/YUV (4:4:4) – 10-bit color
YUV (4:2:2/4:2:0) – 12-bit color
RGB (4:4:4) to YUV (4:4:4)
Frame delay:
No delay
Data rate:
Total max: 10.8 Gbps (1.62/2.7 Gbps/lane)
Supported video standards: DP 1.1a compliant
3D support:
Yes
Embedded audio
Yes
EDID emulation:
Yes, Advanced EDID management
HDCP compliancy:
1.3
Audio capability:*
4 stereo PCM or HBR compressed
Weight:
95 g
Power consumption:
0,8 W (typ) 2,5 W (max)
Connectors:
Standard DisplayPort gold plated connector
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
*The transmitted audio depends on the Media connector. For final audio transmission
capabilities please see the chosen Media connectors audio specification.
www.lightware.eu
15
Ethernet 10/100 Mbit module
Interface modules
MODEX-IF-ETH
Lightware’s innovative MODEX architecture allows each transmitter
and receiver to support a wide variety of auxiliary signal types through
the Interface modules. All auxiliary signal types can be simultaneously
transmitted at full bandwidth over fiber or twisted pair reducing the need
for additional extenders and cabling. MODEX frames have auxiliary
interface slots (half RU has two module slots). It can be any control
signal, audio or Ethernet.
Part No: 9161 0718
Features
■■ 10/100 Mbit Ethernet transmission
Additional 10/100 Ethernet port is available through the Ethernet
interface module supporting a full duplex autodetect connection. Power
over Ethernet is not supported however the module can be connected to
PoE devices as well.
Specifications
16
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP,
SMTP, Telnet
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Weight:
70 g
Power consumption:
0,05 W (typ) 0,066 W (max)
Connectors:
1 RJ-45
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
Interface modules
RS-232 and 2 port Ethernet 10/100 Mbit module
Ethernet 4 port 10/100 Mbit module
MODEX-IF-2ETH-RS232
MODEX-IF-4ETH
Part No: 9161 0730
Part No: 9161 0726
Features
Features
Two additional 10/100 Ethernet port are available through this Ethernet –
RS-232 interface module supporting a full duplex autodetect connection.
Power over Ethernet is not supported however the module can be
connected to PoE devices as well. Bidirectional RS-232 control signals
can be transmitted alongside the video and audio signals, allowing the
remote device to be controlled without the need for additional cabling.
The RS-232 baud rate can be configured for the need of the system.
Four additional 10/100 Ethernet port are available through this Ethernet
interface module supporting a full duplex autodetect connection. Power
over Ethernet is not supported however the module can be connected to
PoE devices as well.
Specifications
Specifications
■■
■■
■■
■■
■■ Four RJ-45 connectors
■■ 10/100 Mbit Ethernet transmission
Two RJ-45 and an RS-232 connectors
10/100 Mbit Ethernet transmission
Bidirectional RS-232 for AV device control
Configurable RS-232 baud rate
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet data rate:
10/100Base-T, full duplex with autodetect
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Power over Ethernet:
Not supported
Power over Ethernet:
Not supported
Auto-MDIX:
Yes
Auto-MDIX:
Yes
Weight:
75 g
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Power consumption:
1,5 W (typ) 2,3 W (max)
Connectors:
4 x RJ-45
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Signal type:
RX/TX bidirectional
Weight:
85 g
Storage temperature:
-20°C - +85 °C
Power consumption:
1,5 W (typ) 2,3 W (max)
Humidity:
10% to 90% non-condensing
Connectors:
2 x RJ-45, male 9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
17
Ethernet 10/100 Mbit module with EtherCON connector
Digital and analog audio input module
MODEX-IF-ETH-ECN
MODEX-IF-AUDIN
Part No: 9161 0727
Part No: 9161 0719
Features
Features
Additional 10/100 Ethernet port is available through the Ethernet
interface module supporting a full duplex autodetect connection. Power
over Ethernet is not supported however the module can be connected to
PoE devices as well.
Digital and analog audio interface module includes an S/PDIF and
balanced stereo input. S/PDIF input supports 2-channel stereo to 5.1
digital audio up to 24-bit, 96 kHz (96 kHz only in embedded mode).
The balanced analog stereo audio can be used in audio breakaway
applications. For more flexibility, the module provides advanced settings
to customize the input such as gain, volume level control and phase
inversion.
Specifications
Specifications
■■ Durable latch lock Neutric EtherCON connector
■■ 10/100 Mbit Ethernet transmission
■■ SPDIF 5.1 audio input
■■ Balanced analog audio input
Ethernet data rate:
10/100Base-T, full duplex with autodetect
S/PDIF digital audio
Ethernet protocol:
ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP,
Telnet
Audio formats:
S/PDIF
Power over Ethernet:
Not supported
Supported sample rates:
16 to 48 kHz
Auto-MDIX:
Yes
AES/EBU compatibility:
No
Weight:
75 g
Bit depths:
Up to 24 bit
Power consumption:
0,1 W (typ) 0,2 W (max)
Analog audio
Connectors:
Neutrik Ethercon RJ-45 receptacle
with latch lock (NE8FBH-S)
Sample frequency:
16 to 96 kHz
ESD protection:
IEC61000−4−2 Level 4
Maximum level:
Input: 4.4 Vp-p
Operation temperature:
0°C - +50 °C
Frequency response:
20Hz to 20 kHz: ±1dB
Storage temperature:
-20°C - +85 °C
Gain:
-5dB to 19dB;
Humidity:
10% to 90% non-condensing
Input impedance:
28 kΩ
Weight:
80 g
Power consumption:
0,2 W (typ) 0,33 W (max)
Connectors:
1 x RCA, 1 x 5 pole PHOENIX
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
18
www.lightware.eu
Interface modules
Digital and analog audio output module
Digital and analog bidirectional audio module
MODEX-IF-AUDOUT
MODEX-IF-AUD
Part No: 9161 0720
Part No: 9161 0721
Features
Features
Digital and analog audio interface module includes an S/PDIF and
balanced stereo output. S/PDIF output supports 2-channel stereo to 5.1
digital audio up to 24-bit, 96 kHz. The balanced analog stereo audio can
be used in audio breakaway applications. For more flexibility, the module
provides advanced settings to customize the output such as volume,
bass and high level control.
Digital and analog audio interface module includes input and output
with S/PDIF and stereo analog option. S/PDIF input and output supports
2-channel stereo to 5.1 digital audio up to 24-bit, 96 kHz (96 kHz only
in embedded mode). It also offers balanced analog stereo audio that can
be used in audio breakaway applications. For more flexibility, the module
provides advanced settings to customize the input and output such as
gain, volume, bass and high level control and phase inversion.
Specifications
Specifications
■■ SPDIF 5.1 audio output
■■ Balanced analog audio output
S/PDIF digital audio
■■ SPDIF 5.1 audio input and output
■■ Balanced analog audio input and output
S/PDIF digital audio
Audio formats:
S/PDIF
Audio formats:
S/PDIF
Supported sample rates:
16 to 48 kHz
Supported sample rates:
16 to 48 kHz (input), 16 to 48 kHz (output)
AES/EBU compatibility:
No
AES/EBU compatibility:
No
Bit depths:
Up to 24 bit
Bit depths:
Up to 24 bit
Analog audio
Analog audio
Sample frequency:
16 to 96 kHz
Sample frequency:
16 to 96 kHz
Maximum level:
4.4 Vp-p (6 dBu)
Maximum level:
Input: 4.4 Vp-p; output: 4.4 Vp-p (6 dBu)
Frequency response:
20Hz to 20 kHz: ±1dB
Frequency response:
20Hz to 20 kHz: ±1dB
Gain:
+5dB to -73dB (and -∞dB)
Gain:
Output impedance:
1.2 kΩ
Input: -5dB to 19dB;
Output: +5dB to -73dB (and -∞dB)
Input/output impedance:
Input: 28 kΩ, output: 1.2 kΩ
Weight:
80 g
Power consumption:
0,2 W (typ) 0,33 W (max)
Weight:
90 g
Connectors:
1 x RCA, 1 x 5 pole PHOENIX
Power consumption:
0,2 W (typ) 0,33 W (max)
ESD protection:
IEC61000−4−2 Level 4
Connectors:
2 x RCA, 2 x 5 pole PHOENIX
Operation temperature:
0°C - +50 °C
ESD protection:
IEC61000−4−2 Level 4
Storage temperature:
-20°C - +85 °C
Operation temperature:
0°C - +50 °C
Humidity:
10% to 90% non-condensing
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
19
RS-232 and IR module
RS-232 module
MODEX-IF-RS232-IR
MODEX-IF-RS232
Part No: 9161 0715
Part No: 9161 0712
Features
Features
Bidirectional RS-232 control and IR signals can be transmitted alongside
the video and audio signals, allowing the remote device to be controlled
without the need for additional cabling. The RS-232 baud rate can be
configured for the need of the system to any user specified baud rates.
IR emitter is supplied which required for IR extension.
Bidirectional RS-232 control signals can be transmitted alongside the
video and audio signals, allowing the remote device to be controlled
without the need for additional cabling. The RS-232 baud rate can be
configured for the need of the system.
Specifications
Specifications
■■ Bidirectional RS-232 for AV device control
■■ Bidirectional IR control
■■ Configurable RS-232 baud rate
■■ Bidirectional RS-232 for AV device control
■■ Configurable RS-232 baud rate
RS-232
RS-232
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Signal type
RX/TX bidirectional
Signal type
RX/TX bidirectional
Weight:
60 g
Power consumption:
0,1 W (typ) 0,2 W (max)
Connectors:
9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
IR
Supported frequencies
(input carrier freq):
38 kHz
Supported frequencies
(output carrier freq):
38 kHz (configurable)
Weight:
65 g
Power consumption:
0,1 W (typ) 0,2 W (max)
Connectors:
2 x 3.5mm TRS connector (1/8'' mini-jack)
9-pole D-sub male
ESD protection:
No
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
20
www.lightware.eu
Interface modules
RS-232 double module
RS-232 and RS-422 module
MODEX-IF-2xRS232
MODEX-IF-RS232-RS422
Part No: 9161 0713
Part No: 9161 0714
Features
Features
Bidirectional RS-232 control signals can be transmitted alongside the
video and audio signals with two individual connectors, allowing the
remote device to be controlled without the need for additional cabling.
The RS-232 baud rate can be configured for the need of the system.
Bidirectional RS-232 and RS-422 control signals can be transmitted
alongside the video and audio signals, allowing the remote device to be
controlled without the need for additional cabling. The RS-232 and RS-422
baud rate can be configured for the need of the system to any user specified
baud rates.
Specifications
Specifications
■■ Bidirectional RS-232 for AV device control
■■ Configurable RS-232 baud rate
■■ Bidirectional RS-232 for AV device control
■■ Bidirectional RS-422 control
■■ Configurable RS-232/422 baud rate
RS-232 double
RS-232
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Supported baud rate:
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /
115200 / 128000 / 153600 / 230400 / 256000
(configurable)
Signal type
RX/TX bidirectional
Signal type
RX/TX bidirectional
Weight:
70 g
RS-422
Power consumption:
0,1 W (typ) 0,2 W (max)
Pin assigment:
1: RX-, 2:RX+, 3:TX+, 4:TX-, 5:GND
Connectors:
2 x 9-pole D-sub male
Signal levels:
±5 V
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Weight:
70 g
Storage temperature:
-20°C - +85 °C
Power consumption:
0,1 W (typ) 0,2 W (max)
Humidity:
10% to 90% non-condensing
Connectors:
2 x 9-pole D-sub male
ESD protection:
IEC61000−4−2 Level 4
Operation temperature:
0°C - +50 °C
Storage temperature:
-20°C - +85 °C
Humidity:
10% to 90% non-condensing
www.lightware.eu
21
Frames
MODEX-F15-OPTS-TX
MODEX-OPTS-TX - Singlemode fiber optical transmitter frame with USB KVM and Ethernet ports
9161 0103
MODEX-F15-OPTS-RX
MODEX-OPTS-RX - Singlemode fiber optical receiver frame with USB KVM and Ethernet ports
9161 0104
MODEX-F15-OPTM-TX
MODEX-OPTM-TX - Multimode fiber optical transmitter frame with USB KVM and Ethernet ports
9161 0106
MODEX-F15-OPTM-RX
MODEX-OPTM-RX - Multimode fiber optical receiver frame with USB KVM and Ethernet ports
9161 0107
Media Connector
MODEX-CON-OPTM-NT
OPTM multimode Media Core input/output with Neutrik OpticalCON DUO and IEC C14 AC inlet (RX/TX)
9161 0228
MODEX-CON-OPTS-NT
OPTS singlemode Media Core input/output with Neutrik OpticalCON DUO and IEC C14 AC inlet (RX/TX)
9161 0227
MODEX-CON-OPTM-NT-PCN
OPTM multimode Media Core input/output with Neutrik OpticalCON DUO and PowerCON AC inlet (RX/TX)
9161 0232
MODEX-CON-OPTS-NT-PCN
OPTS singlemode Media Core input/output with Neutrik OpticalCON DUO and PowerCON AC inlet (RX/TX)
9161 0231
MODEX-CON-OPTM-ODVA
OPTM multimode Media Core input/output with industrial LC ODVA compliant connector and IEC C14 AC inlet (RX/TX)
9161 0230
MODEX-CON-OPTS-ODVA
OPTS singlemode Media Core input/output with industrial LC ODVA compliant connector and IEC C14 AC inlet (RX/TX)
9161 0229
MODEX-CON-OPTM-SC
OPTM multimode Media Core input/output with SC optical connector and IEC C14 AC inlet (RX/TX)
9161 0238
MODEX-CON-OPTS-SC
OPTS singlemode Media Core input/output with SC optical connector and IEC C14 AC inlet (RX/TX)
9161 0237
MODEX-CON-OPTM-ST
OPTM multimode Media Core input/output with ST optical connector and IEC C14 AC inlet (RX/TX)
9161 0236 MODEX-CON-OPTS-ST
OPTS singlemode Media Core input/output with ST optical connector and IEC C14 AC inlet (RX/TX)
9161 0235 Alternative versions (E.g. EBC Mini, EBC Junior, HICON Hi-Fiber4, Lemo 3K.93C, etc.) Call sales for availability
Call
Video & Audio modules
MODEX-AV-DVIDL-IM
Dual-Link DVI input module
9161 0401
MODEX-AV-DVIDL-IM-AUD*
Dual-Link DVI input module with digital and analog audio
9161 0402
MODEX-AV-DVIDL-IM-DSP*
Dual-Link DVI input module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0403
MODEX-AV-DVIDL-OM
Dual-Link DVI output module
9161 0404
MODEX-AV-DVIDL-OM-AUD*
Dual-Link DVI output module with digital and analog audio
9161 0405
MODEX-AV-DVIDL-OM-DSP*
Dual-Link DVI output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0406
MODEX-AV-HDMI-DVI-IM
HDMI 1.3 and DVI input module
9161 0407
MODEX-AV-HDMI-DVI-IM-AUD*
HDMI 1.3 and DVI input module with digital and analog audio
9161 0408
MODEX-AV-HDMI-DVI-IM-DSP*
HDMI 1.3 and DVI input module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0409
MODEX-AV-HDMI-DVI-4K-IM
HDMI and DVI 3D and 4K input module
9161 0410
MODEX-AV-HDMI-DVI-4K-IM-AUD* HDMI and DVI 3D and 4K input module with digital and analog audio
9161 0411
MODEX-AV-HDMI-DVI-4K-IM-DSP*
HDMI and DVI 3D and 4K input module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0412
MODEX-AV-HDMI-OM
HDMI 1.3 output module
9161 0413
MODEX-AV-HDMI-OM-AUD*
HDMI 1.3 output module with digital and analog audio
9161 0414
MODEX-AV-HDMI-OM-DSP*
HDMI 1.3 output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0415
MODEX-AV-HDMI-4K-OM
HDMI 3D and 4K output module
9161 0416
MODEX-AV-HDMI-4K-OM-AUD*
HDMI 3D and 4K output module with digital and analog audio
9161 0417
MODEX-AV-HDMI-4K-OM-DSP*
HDMI 3D and 4K output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0418
MODEX-AV-DP-IM*
DisplayPort 1.1 input module
9161 0419
MODEX-AV-DP-IM-AUD*
DisplayPort 1.1 input module with digital and analog audio
9161 0420
MODEX-AV-DP-IM-DSP*
DisplayPort 1.1 input module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0421
MODEX-AV-DP-OM*
DisplayPort 1.1 output module
9161 0422
MODEX-AV-DP-OM-AUD*
DisplayPort 1.1 output module with digital and analog audio
9161 0423
MODEX-AV-DP-OM-DSP*
DisplayPort 1.1 output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0424
MODEX-AV-3GSDI-IM-AES*
3G-SDI input module with SDI loop out and AES/EBU audio
9161 0425
MODEX-AV-3GSDI-IM
3G-SDI input module with 2 SDI loop out
9161 0426
MODEX-AV-3GSDI-IM-AUD*
3G-SDI input module with 2 SDI loop out and digital and analog audio
9161 0427
MODEX-AV-DVI-OM
DVI output module
9161 0430
MODEX-AV-DVI-OM-AUD*
DVI output module with digital and analog audio
9161 0431
22
www.lightware.eu
Summary
MODEX-AV-DVI-OM-DSP*
DVI output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0432
MODEX-AV-DVI-IM
DVI input module
9161 0433
MODEX-AV-DVI-IM-AUD*
DVI input module with digital and analog audio
9161 0434
MODEX-AV-DVI-IM-DSP*
DVI input module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0435
MODEX-AV-DVI-4K-OM
4K UHD DVI output module
9161 0436
MODEX-AV-HDMI-DVI-4K-OM
4K UHD HDMI and DVI dual output module
9161 0439
MODEX-AV-HDMI-DVI-4K-OM-AUD* HDMI and DVI 3D and 4K output module with digital and analog audio
9161 0440
MODEX-AV-HDMI-DVI-4K-OM-DSP* HDMI and DVI 3D and 4K output module with digital and analog audio and Dolby & DTS decoder (DSP)
9161 0441
MODEX-AV-BLANK
Blank panel for video module slot
9161 0699
8 GPIO module
9161 0701
Interface modules
MODEX-IF-8GPIO*
MODEX-IF-2x8GPIO*
16 GPIO module
9161 0702
MODEX-IF-8GPIO-3RELAY*
8 GPIO and 3 Relay module
9161 0703
MODEX-IF-8GPIO-RS232*
8 GPIO and RS-232 module
9161 0704
MODEX-IF-8GPIO-RS422*
8 GPIO and RS-422 module
9161 0705
MODEX-IF-8GPIO-IR*
8 GPIO and IR module
9161 0706
MODEX-IF-3RELAY*
3 Relay module
9161 0707
MODEX-IF-2x3RELAY*
6 Relay module
9161 0708
MODEX-IF-3RELAY-RS232*
3 Relay and RS-232 module
9161 0709
MODEX-IF-3RELAY-RS422*
3 Relay and RS-422 module
9161 0710
MODEX-IF-3RELAY-IR*
3 Relay and IR module
9161 0711
MODEX-IF-RS232
RS-232 module
9161 0712
MODEX-IF-2xRS232
RS-232 double module
9161 0713
MODEX-IF-RS232-RS422
RS-232 and RS-422 module
9161 0714
MODEX-IF-RS232-IR
RS-232 and IR module
9161 0715
MODEX-IF-MIC*
Microphone/Line input module with phantom power
9161 0716
MODEX-IF-ETH
Ethernet 10/100 Mbit module
9161 0718
MODEX-IF-AUDIN
Digital and analog audio input module
9161 0719
MODEX-IF-AUDOUT
Digital and analog audio output module
9161 0720
MODEX-IF-AUD
Digital and analog bidirectional audio module
9161 0721
MODEX-IF-DSPIN*
Digital and analog audio input module with Dolby & DTS decoder (DSP)
9161 0722
MODEX-IF-DSPOUT*
Digital and analog audio output module with Dolby & DTS decoder (DSP)
9161 0723
MODEX-IF-DSP*
Digital and analog bidirectional audio module with Dolby & DTS decoder (DSP)
9161 0724
MODEX-IF-4ETH
4 ports Ethernet 10/100 Mbit module
9161 0726
MODEX-IF-ETH-ECN
Ethernet 10/100 Mbit module with EtherCON connector
9161 0727
MODEX-IF-2ETH-8GPIO*
2 ports Ethernet 10/100 Mbit and 8 GPIO module
9161 0728
MODEX-IF-2ETH-3Relay*
2 ports Ethernet 10/100 Mbit and 3 Relay module
9161 0729
MODEX-IF-2ETH-RS232
RS-232 and 2 port Ethernet 10/100 Mbit module
9161 0730
MODEX-IF-2ETH-RS422*
2 ports Ethernet 10/100 Mbit and RS422 module
9161 0731
MODEX-IF-2ETH-IR*
2 ports Ethernet 10/100 Mbit and IR module
9161 0732
MODEX-IF-BLANK
Blank panel for interface module slot
9161 0999
*under development
www.lightware.eu
23
How to order a MODEX?
After you choose the frame and the modules you will have the right
configuration for your application. The last move to do is to order the
MODEX. In the examples below you can see the best option how to do this
by creating a list of the five part numbers.
Example 1
MODEX frame
MODEX-F15-OPTS-TX
MODEX frame
MODEX-F15-OPTS-RX
9161 0103
MODEX-CON-NT-OPTS
9161 0227
MODEX-AV-HDMI-4K-OM
9161 0410
MODEX-IF-AUDOUT
Blank panel
9161 0715
9161 0721
Example 2
MODEX frame
MODEX-F15-OPTM-TX
MODEX frame
MODEX-F15-OPTM-RX
9161 0106
MODEX-CON-OPTM-NT-PCN
9161 0232
MODEX-AV-DVI-OM
9161 0426
24
9161 0107
9161 0232
9161 0430
Interface modules
Interface modules
Blank panel
Blank panel
Video & Audio module
Video & Audio module
MODEX-AV-3GSDI-IM
9161 0720
9161 0999
Media connector
Media connector
MODEX-CON-OPTM-NT-PCN
9161 0416
Interface modules
Interface modules
MODEX-IF-RS232-IR
MODEX-IF-AUD
9161 0227
Video & Audio module
Video & Audio module
MODEX-AV-HDMI-DVI-4K-IM
9161 0104
Media connector
Media connector
MODEX-CON-NT-OPTS
MODEX-IF-AUDOUT
MODEX-IF-AUDOUT
9161 0999
9161 0999
www.lightware.eu
9161 0720
9161 0720
25G HYBRID switcher with MODEX
Integrated system
CINEMA
THEATER
Projector
Eth.
Projector
DVI-DL
Laptop
MODEX receiver
Blu-Ray Player
VGA
104
104
DVI
RS-232
MODEX receiver
audio
S/PDIF
Blu-Ray Player IR emitter
Ethernet
HDMI
IR
HDMI
Media receiver Speakers
103
103
Speakers
MODEX transmitter
RS-232
MODEX transmitter
Ethernet
Touch control
Touch control
CONFERENCE ROOM 1
CONFERENCE ROOM 2
Keyboard
Mouse Display
DVI
Display
IR emitter
Projector
DVI
104
Camera
SDI
MODEX receiver
103
Normal
Prog
Ethernet
HDMI-TPS-RX90
Receiver
HDCP
VIDEO
LINK
LIVE
RS-232
IR IN
DVI
IR OUT
TPS receiver
MODEX transmitter
HDMI-TPS-RX90
Receiver
HDCP
VIDEO
LINK
LIVE
RS-232
Normal
Prog
IR IN
IR OUT
TPS receiver
Ethernet
L
R
VIDEO
AUDIO
VGA INPUT
S/PDIF INPUT
HDMI
VGA
HDMI
ANALOG
S/PDIF
VIDEO
SELECT
INPUT STATUS
AUDIO
SELECT
103
HDMI INPUT
ANALOG AUDIO
INPUT
Touch control
UMX-TP transmitter
MODEX transmitter
DVI
DVD Player
DP
USBHID
DVI
USB- DVI
HID
VGA
Laptop
PC
PC
HDMI
PC
PC
25G HYBRID Signal Management
with MODEX extenders
MODEX extenders connected to a 25G matrix as end-points result a full
signal path infrastructure from end to end. The Hybrid hardware and
software design allows switching and transmission of all signals over
one single fiber or CAT cable in a single router. Lightware’s 25G Hybrid
matrix is the world’s first fully compatible HDMI 1.4 matrix switcher that
also provides HEC and ARC functions, supports 4K resolutions and full
3D formats. 25G Hybrid has 8 separate Media layers, giving the rise to
the expression: Multilayer switching.
25G matrix switchers don’t only handle inputs and outputs, we have
added a third dimension, the Media Layers. Inside a 25G Hybrid router
there are as many Media layers as signal types. It means there are as
many individual routers as signal formats being incorporated. MODEX
extenders can function as far end connection points of these layers
which gives the user limitless variability and a wide range of installation
options.
www.lightware.eu
25
USB KVM standalone application diagram
MODEX transmitter
MODEX receiver
Fiber
USB
USB
DisplayPort
PC
RCA
Keyboard Mouse
Dual-Link DVI
Speakers Dual-Link display
Any transmitter can be connected to any receiver: the DisplayPort input is converted to Dual-Link output automatically by MODEX transmitting the USB KVM
devices signal as well.
Rental and staging application diagram
Projector and MODEX boxes
are controlled by laptop
LAN
Laptop
Media receiver Speakers
RCA
Fiber
MODEX transmitter
MODEX receiver
SDI
Broadcast panel
Ethernet
DVI
Projector
SDI transmitter connects directly to the DVI receiver. The transmission is format free; MODEX sends the video pixels regardless of the video format.
Optional accessories
Devices can be mounted several ways, depending on the application.
Rack shelf and mounting bracket is available which offers easy mounting
on truss systems with standard clamps or using the unit built in to
furniture.
Mounting bracket V2 Part No: 5240 0273
Our new mounting bracket makes through-furniture and under-desk
mounting easy and allows truss mounting with standards clamps for our
MODEX family and other upcoming extenders as well.
Rack shelf Part No: 5240 0269
1U high rack shelf provides mounting holes for fastening two half-rack sized units.
26
www.lightware.eu
©2014 Lightware Visual Engineering. All rights reserved. All trademarks mentioned are the property of their respective owners.
Specifications subject to change without notice.
www.lightware.eu
Ver 2.1, 2014 September
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising