arch specs jd20-jd20t:jd20 jd20-t

arch specs jd20-jd20t:jd20 jd20-t
MUSIC CABINET
Loudspeaker
JD20
ARCHITECTS & ENGINEERS
SPECIFICATION
The unit shall be the PENTON model JD20 or equal and approved. The enclosure shall be ported and
constructed of high impact ABS plastic, treated with UV inhibitors. The grille will be manufactured
from mild steel with an epoxy coated finish. The speaker assembly shall comprise of a 110mm
bass/mid-range polypropylene coned loudspeaker and a 25mm Mylar dome tweeter complete with
neodymium magnet. Cabinet shall be available in black or white and be aesthetically pleasing.
The loudspeaker shall have a wide-angle dispersion with a smooth extended frequency response.
The speaker must be provided with a ball jointed uni-directional bracket enabling adjustment in both
the vertical and horizontal plane. The speaker bracket must allow for easy access for adjustment
before and after it has been installed.
RATED POWER
2OW
DRIVER IMPEDANCE
16 OHMS
EFFECTIVE FREQUENCY RANGE (BS6840 PART 5)
63 - 20kHz
SPL @ 1W/M (TEST SIGNAL 100Hz - 10kHz)
84dB
DISPERSION AT 1k/2kHz
180/100
AXIAL Q FACTOR AT 1k/2kHz
3.5/7.1
COLOUR
WHITE OR BLACK
All units to be tested in accordance with BSEN60268-5
Penton UK Ltd
Unit 2 Teville Industrials | Dominion Way | Worthing | West Sussex | BN14 8NW
T: +44 (0)1903 215315 | F: +44(0)1903 215415 | E: SALES@PENTONUK.CO.UK
www.pentonuk.co.uk
ISSUE MAY 2010
MUSIC CABINET
Loudspeaker
JD20/T
ARCHITECTS & ENGINEERS
SPECIFICATION
The unit shall be the PENTON model JD20/T or equal and approved. The enclosure shall be ported and
constructed of high impact ABS plastic, treated with UV inhibitors. The grille will be manufactured from
mild steel construction with an epoxy coated finish. The assembly of the speaker shall comprise of a
110mm bass/mid-range polypropylene coned loudspeaker and a 25mm Mylar dome tweeter complete
with neodymium magnet. Cabinet shall be available in black or white and aesthetically pleasing.
The loudspeaker shall be rated at 100 volt line and have a wide-angle dispersion with a smooth
extended frequency response.
The JD20T will be supplied with a tapping selector switch, accessible from the front of the cabinet with
3dB steps of 20, 10, 5 and 2.5 watts.
The speaker must be provided with a ball jointed uni-directional bracket enabling adjustment in both the
vertical and horizontal plane. The speaker bracket must be accessible for easy adjustment before and
after it has been installed.
RATED POWER
2OW
TAPPINGS
20/10/5/2.5W
EFFECTIVE FREQUENCY RANGE (BS6840 PART 5)
63 - 20kHz
SPL @ 1W/M (TEST SIGNAL 100Hz - 10kHz)
84dB
DISPERSION AT 1k/2kHz
180/100
AXIAL Q FACTOR AT 1k/2kHz
3.5/7.1
COLOUR
WHITE OR BLACK
All units to be tested in accordance with BSEN60268-5
Penton UK Ltd
Unit 2 Teville Industrials | Dominion Way | Worthing | West Sussex | BN14 8NW
T: +44 (0)1903 215315 | F: +44(0)1903 215415 | E: SALES@PENTONUK.CO.UK
www.pentonuk.co.uk
ISSUE MAY 2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising