Dual97 English UM+wlan - Headway Trading Limited

Dual97 English UM+wlan - Headway Trading Limited
II. CELL PHONE OUTLINE .........................................ERRORE. IL SEGNALIBRO NON È DEFINITO.
III. PREPARATIONS ...................................................ERRORE. IL SEGNALIBRO NON È DEFINITO.
VII. OPERATING INSTRUCTIONS OF EDITOR ............................................................................... 35
VIII. APPLICATION OF USB STORAGE FUNCTION....................................................................... 36
IX. APPENDIX 1............................................................................................................................... 37
X. APPENDIX 2................................................................................................................................ 39
I. Safety and Precautions
To use your cell phone safely and effectively, please read the following information before use:
Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other
Please keep your phone out of the reach of children.
To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a call
after parking your car by the roadside. Do NOT use the phone during driving at high speed.
Do NOT use your cell phone while in a plane. Please check whether Auto Power On is set or not before
Do not use your cell phone in a hospital to avoid interference with the normal operation of medical
equipment which may result in a medical accident. If the cell phone is used near a pacemaker, audiphone
and some medical electronic equipment, you should pay special attention to that the cell phone may
interfere with these devices.
Auxiliaries and accessories not provided by us are excluded from the guarantee.
Do not dismantle your cell phone by yourself. In case of a failure, please contact the service station
specified by us.
Do NOT charge your phone with no battery. Please turn off your phone before removing the battery;
otherwise, the phone memory may be damaged.
The phone should be charged in the environment which is well-ventilated, and should be kept away from
the inflammables and explosives.
To avoid demagnetization, please keep your phone away from magnetic substances, such as magnetic disk,
credit card, etc.
Please be sure the phone isn't exposed to any liquid. If this situation occurs, please remove the battery and
contact the service station specified by us.
Please use your phone in the environment which is neither too hot nor too cold, and do not expose your
phone to the strong sunlight or use in high-humidity environment.
Do NOT use liquid or wet cloth with strong detergent to clean your phone.
Your cell phone has photo and record functions, so please use these functions following the related laws and
regulations. You may violate the law and regulation if taking photo and record without authorization.
Do not throw, drop or hit the cell phone during use to avoid damage to the housing or the elements inside
the phone.
Do NOT dispose the worn battery as common domestic rubbish. Please dispose the worn battery according
to the specified instructions where the disposal of a worn battery is clearly specified.
〈Note〉:1. The Company won't undertake any responsibility for any consequences caused by failure to
observe the above-mentioned suggestions or improper applications.
2. The provided cables are only applicable to this type of mobile phone and the provided charge;
you can also connect the phone to the PC by a USB cable to charge the phone. Do not charge the phone by
any other mode.
If any content described in this manual goes against that of your cell phone, please subject to the real cell
The original factory is entitled to modify the manual at any time without further notice.
II. Cell Phone Outline
The following is the view of the phone:
Installation of your SIM card
You can apply for two different numbers offered by two network providers and get two SIM cards (users
identify cards).
With those two SIM cards, you can use various functions of this cell phone. Many parameters required for
communications are stored in the SIM cards. Personal data, including the PIN (personal identification number),
phonebook, SMS and other extra system services can also be stored in the SIM cards.
Warning:Do NOT twist or scratch the SIM card and expose it to static electricity, dust or water. If you lost
your SIM card, please contact your network operator for help.
To install your SIM cards, please turn off your cell phone first, remove the back cover, and insert the SIM
cards into the SIM card slots at the back of the phone.
Please install the SIM cards as shown below:
Formattati: Elenchi puntati e
Note:The SIM card is a small object, please keep the card out of the reach of the child to avoid swallowing
the card by accident!
Installation of memory card
The phone supports T-FLASH card as to expand the memory space. Please install or take out the memory card as
per the following picture after shutting down the phone.
Note: The T-FLASH card is a small object, please keep the T-FLASH card out of the reach of the child to
avoid swallowing the card by accident!
Tip:The phone supports a memory card with capacity up to 8GB. It is recommended that only the attached
standard TF card and other TF cards of well-known brand like SanDisk and Kingston are used. Other TF cards
may be not compatible with the phone.
Installation of battery
Please use the original-packaging battery and accessories. Store the battery well if it is not used.
Please install the battery at shut down status.
Note:Please follow the correct procedures as shown in the figure to prevent damage to the battery contact
Charge the battery
The new battery must be fully charged and discharged for several times to reach its best performance.
Charge as soon as possible when the power is used up as over-discharge will damage your battery.
Disconnect the charger and the power supply and then disconnect the mobile phone when the battery is
fully charged.
Connect your phone to the charger as per the drawing.
When charging, if the phone is switched on, the power quantity icon at the top left corner of the screen will
twinkle and will stop twinkling and fully display when the battery is fully charged. If the phone is switch off, an
icon will appear at the screen to show the battery is in charging.
Note:A little heating while charging is normal.
Use of battery
The performance of the battery is affected by multiple factors including your wireless loading network
configuration, signal intensity and temperature when using the phone, the function or settings you selected, the
accessories adopted for cell phone and other applied program modes.
To optimize the performance of the battery, please do as following regulations:
New battery or a battery is left unused for a long time should be charged for a long time;
Keep the temperature at or near room temperature when charging;
The battery may require longer time to be full charged after being used for a long time and this is
normal. If the call time becomes too short, you may need to buy a new battery produced by original
factory or authorized by our company. Unqualified battery or accessories may damage your phone and
even cause danger!
If the battery is left unused for a long time or the power is too low, it may require longer time for
the charging interface to appear, please wait patiently.
Note: For your safety and environment, please do not throw away the battery everywhere.
Warning: Explosion, fire or personal injury may be caused by any type of battery short-circuit!
PIN1 code: Personal identification code used to enter SIM card and to prevent others to use the SIM card
without your permission. If PIN1 code safeguard function of your cell phone has already been started, the system
will display “Enter SIM card 1/2 PIN” to enter when switching on the phone. * will be displayed instead of the
PIN1 you entered. You can get PIN1 from your network provider together with the SIM card.
PIN2: The personal identification number use for special functions such as charging function provided by
Formattati: Elenchi puntati e
the network.
PUK and PUK2 (8 digits)
A PUK is required to change the PIN. To change the PIN2, you need to use PUK2 (personal unlock code).
If PUK is not provided together with the SIM card, please ask for it from your network provider.
〈Warning〉:If the PIN code is entered continuously three times, the SIM card will be locked in. Please
consult the network supplier right away to look for deciphering. Unauthorized deciphering may cause permanent
failure to the SIM card.
The PUK code (Personal Unlocking Key, 8digits) is required to change a blocked PIN. It is supplied with
SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be
invalid. Please contact the network operator to replace the SIM card.
Barring code
A barring code is required for setting the call barring function. You can obtain this code from the network
operator to set the call barring function.
、Description of Cell Phone
The mobile phone provides the following keys:
Dial key
Press it to originate a call on SIM card 1 or SIM card 2 by entering the called number or selecting a
contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show
the latest call records.
End key
Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the
standby state;
Optical mouse
To confirm an option (press the middle of the key); Corresponding direction was performed when you
touch optical mouse. In the main menu interface, press it to enter into specified menu.
Power control button
Short press this key to lock/unlock keypad. Long press this key to power on/off the phone.
Left and right soft key
In idle screen, press left soft key to access main menu, press right soft key to access phonebook. The
bottom line on the screen displays the functions of the Left and Right soft key.
Facebook shortcut key
In idle screen, press this key to access Facebook.
MSN shortcut key
Press it in idle screen to access MSN.
Delete key
Formattati: Elenchi puntati e
Press it to delete a character before cursor.
This key helps to switch to another line when the interface is in the edit interface.
Space key
Press it in the edit interface to get a blank.
Sym key
Press it in the edit interface to input a symbol.
Up arrow key:
:Press it to switch between input methods.
a : Press it to switch between upper case and lower case.
:Press it in the edit interface to switch between symbols and letters, numbers and letters, symbol and
symbol on the keypad.
$ key
In edit interface, press this key to input “$”, in idle screen, long press this key to activate/deactivate silent
Side key
Situated at the left side of the phone. Users can press up/middle/down side key to increase volume/take
photos/decrease volume.
Number keys and letters
Press number keys or letter keys to input in edit state to input numbers or characters;
Icons on screen in standby status
SIM card 1 Antenna
Alarm clock activated
SIM card SMS
SIM card SMS
Vibration then ring
Vibration and ring
Missed calls in SIM card
SIM card 1 GPRS
Call divert activated in SIM card
Keypad lock
Languages & Input Methods
English input method is provided in your phone. For details, please refer to chapters related to language
editing, where you can learn different input methods and how to switch between them.
Incoming Call alert method
The built-in vibrating motor and buzzer in your phone provides the following alerting modes:
Vibrating and ringing
Vibrating then ringing
Descriptions of nouns
Making a national call
The simplest way to make a domestic call is to input a phone number by numeral keys and press the
dialing key. If the both SIM cards are inserted and dual SIM open, SIM card 1 dial or SIM card 2 dial
would be selected by pressing dialing keys of SIM 1 or SIM 2.
Note: Enable the function of LSK dialing function in the mune “Call center / General call settings/
SIM card 2 call settings”. Then you could dial from SIM 1 by pressing the calling key,and dial from SIM 2
by pressing LSK.
The screen displays animation of dialing. If dialing from SIM card 1, the screen will display “SIM Card
1 Dialing”, and if dialing from SIM card 2, the screen will display “SIM Card 2 Dialing”.
Call status will display on the screen when the call is answered.
Press the hang-up key to end the call.
Make domestic calls: zone number + phone number + dialing key.
Making an international call
To make an international call, press the “+” key until it is displayed on the screen. This allows you to
make an international call without knowing the prefix number of that country (e.g. China is +86).
Then input the country code and the complete phone number. The country code is subject to
convention, e.g. Germany is 49, Britain is 44 and Sweden is 46, etc.
Make international calls: + country code + complete phone number + dialing key.
Call extension of a fixed phone
Extensions of some fixed phones are not accessible directly, in such case, you need to dial the host
number and then the extension number. Simply insert the letter “P” between the host number and the
extension number and you can call the extension. You can input a “P” by long pressing or repeatedly short
pressing the * key.
Call extension of a fixed phone: phone number + P + extension number + dialing key.
Make emergency calls
Formattati: Elenchi puntati e
In any country where digital GSM is used, you can make an emergency call if your phone is covered
by the network (you can know about this by checking the signal strength indicator bar at the upper corner
of the display of the cell phone). If your network operator does not provide roaming service in that area, the
screen will display "EMERGENCY CALLS ONLY", telling you that you can make this kind of call only.
If you are in the coverage of the network, you can make emergency calls even if your SIM card is not
inserted in.
In some areas, the 112 (emergency call)service is provided by the network operator. If there is anything
abnormal, contact your network operator!
International Mobile Equipment Identity. You can see the bar code label printed with this number at the
back of the cell phone after you have turned off the cell phone and remove the battery. This number is also
stored in the cell phone, and can be displayed when you enter "*#06#" on the screen dial interface.
、Basic operation of cell phone
Powering On/Off the Mobile Phone
Hold the On key for a while to power on the mobile phone. A power-on animation appears on the display screen.
Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code.
The original code is 1234.
Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by
the network operator for new opening SIM card.
Enter the standby interface.
To power off the mobile phone, hold the Off key for a while.
Linking to the Network
After the SIM card and the mobile phone are successfully unlocked, the mobile phone automatically
searches for an available network. After finding a network, the mobile phone enters the standby state. When the
mobile phone is registered in the network, the name of the network operator is displayed on the screen. Then you
can dial or receive a call.
Using the Headset
It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at
the bottom of the slot, or you can’t use it normally.
Making a call
Enter the phone number in standby status, and press the calling key to call. If you want to hang up or cancel
the call, please press the hook up/cancel key;When the phone is connected, you can see the holding time on
the screen.
Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the
calling key to call.
Redial the latest phone number:Press the calling key in standby status to search the latest list of phone
number or name. Roll over to the number or name, then press the calling key.
Adjusting the receiver volume
During a call, you can press side keys to adjust the receiver volume.
Answering a call
When there is a coming call, it will indicate in a mode of ring, vibration, vibration and ring,ring after
vibration or lighting according to the setup of cell phone.
To answer a call, press the calling key.
To reject a call, press on/off key.
If you have applied for calling number identification service, the calling number will show on the screen. If
this number has already stored in the phonebook, the corresponding name of this number then will show on the
If the call is to SIM card 1, “Call to SIM Card 1” will display in front of the number or name.
If the call is to SIM card 2, “Call to SIM Card 2” will display in front of the number or name.
Speed dial
The phone provides 8 speed buttons, and you can define the phone numbers corresponding to these buttons.
So, as long as you long press [2 to 9] keys in standby status, you can call speedily; [1] key is specially used for
the speed dial of voice mailbox number.
<Note>: To speed dial, you have to press and hold on/press a key for 2 seconds and above, and if you
haven’t designated the speed dial function for that key, then you can't be successful for the call.
Sending DTMF signal
When you have set up the DTMF signal sending function, if you press the digit key and * and # key of the
keypad during the period of conversation, it will be sent out in the form of DTMF signal to the other party. If
you don't start up this function, you can't carry out the extension number calling, etc. functions probably.
Call Hold
If you have applied for the value adding of call waiting, the following function menu may appear when you
Formattati: Elenchi puntati e
click an entry during conversation:
Hold: Temporarily suspend the current conversation, but the conversation channel still under connection.
End: End the current connection.
New conversation: Enter the dial interface, and make another call.
Phonebook: You can enter a phonebook directory.
Information: You can enter messages directory.
Record:You can record the current calling contents.
Background tone:Enable or disable the background tone.
Mute/resume: You can switch on/off microphone.
Dual-tone multi-frequency, DTMF: You can set up whether to send out a DTMF signal.
Note:Some menu entries just appear under the specific condition, or they need support from the local
network, such as: “Hold” and “New conversation”, etc., for detail, please consult the network supplier.
Non-response event
When the cell phone has new unread messages and missed call etc. events, the cell phone will have the
corresponding picture or icon prompt, please search these messages in time.
Connecting to voice mailbox
Your cell phone allows you to divert the incoming call to the voice mailbox, then, you will receive a notice
concerning the voice messages (the center number of voice mailbox should be set up properly in advance).
Formattati: Elenchi puntati e
、Operation menu function
If the short message memory is full, a blinking SMS icon appears on the top of the screen. To normally receive
short messages, you need to delete some of the existing short messages.
If the destination user has received the short message you sent and the short message delivery report function is
activated, the phone will give off a message report alert tone.
Write message
Input the content of the short message to be sent. Select Options and you can perform the following operations:
send the message, save the message to drafts, or insert some information, e.g. template, as required.
If a new short message arrives, an icon will be displayed on the screen. If the short message memory is full, you
can no longer receive any short message. To receive short messages, delete some or all the existed short
Choosing“outbox”, the short messages in the Inbox are listed on the screen. A short message marked with an
icon indicates that you have unread message.
Press the OK key to view the current message.
The messages send failed are stored in this item.
Sent messages
The messages you sent to others would be stored in this item.
From the main menu select “Messages” to create text message. You can type a message, and you're also able to
insert a pre-defined message from “Templates”. While writing a message, select “Options” to access all the
messaging options. You can save your messages that you send often to “Drafts”.
Formattati: Elenchi puntati e
Delete messages
You can delete all message stored in inbox, drafts, outbox, sent messages or all of them.
SMS Settings
This function enables you to set the default features about the SMS.
Profile settings: Save or modify the short message service center number required for short message
transmission, or obtain it from the network operator.
Voicemail server: Edit: Edit or delete your voice mailbox number; or select OK to save the number. Call
voicemail: Dial the voice mailbox number stored in the voice mailbox number list. Note: In the standby
interface, you can press number 1 key to call the voice mailbox after setting the voice mailbox number.
Common settings: Set the message delivery report and the reply path. After Delivery report is set to On, the
short message service center will send a status report indicating whether the short message you sent has
been successfully delivered. This function requires the network operator's support.
Memory status: View the percentage of the memory seized by the short messages in the SIM card to the total
SIM card capacity and the percentage of the memory seized by the short messages in the phone to the
total phone capacity.
Preferred storage: Select the default storage path of short messages, i.e. whether to save short messages to
the mobile phone or the SIM cards.
Templates: Some templates are stored in the mobile phone. They can be edited or deleted. The phrase will be
replaced by a blank after being deleted.
The mobile phone can store up to 2000 telephone numbers. The number of telephone numbers that an SIM card
can store depends on the storage capacity of the SIM card. The telephone numbers stored in the mobile phone
and in the SIM cards form a phonebook.
In the Name interface, input the name of the contact you want to search or the first letter(s) of the name. Press
the Left soft key and select Search. All the contacts meeting the search condition are listed.
After selecting a telephone number in the phonebook, select Options to perform the following operations:
View: View the content of the telephone number.
Sent text message: sent message to this number.
Sent multimedia message: sent MMS to this number.
Call: Call the number you’ve selected.
Edit: Edit the telephone number.
Delete: Delete the telephone number from the phonebook.
Copy: Duplicate the telephone number from the mobile phone to the SIM card or from the SIM card to
the mobile phone.
Move: Move the telephone number to the SIM card if it is stored in the mobile phone or to the mobile
phone if it is stored in the SIM card.
Send contact: To send the record through message, multimedia message, Bluetooth and email or store as
Add to blacklist: He or she can’t call you if you add his or her number to blacklist.
Caller groups: You can set five caller groups, including names, associated sound, associated pictures and
Phonebook setting: To set some parameter of phonebook.
Once you enter this menu, there is a monthly-view calendar for you to keep track of important appointments, etc.
Days with events entered will be marked.
Call history
SIM1 Missed Calls
You can view a list of the latest missed calls.
Note: When the mobile phone indicates that some calls are missed, you can select Read to enter the missed calls
list. Navigate to a missed call and then press the Dial key to dial the number that originated that call.
SIM1 Dialed Calls
You can view the latest dialed calls. Choose SIM1 dialed calls and then select a dialed call to delete, save, dial,
or edit (or send a short message to it).
SIM1 Received Calls
You can view the latest received calls. Choose SIM1 received calls and then select a received call to delete, save,
dial, or edit (or send a short message to it).
Delete SIM1 Call Logs
You can delete the latest call records. Choose Delete SIM1 call log and then select to delete all the numbers in
the call history, or delete only the numbers in the missed calls list, the dialed calls list or the received calls list.
SIM1 Call Timers
Choose SIM1 call time to view the last call time, the total time of all dialed calls and the total time of all
received calls, and/or to reset all the time.
SIM1 Call Cost
Choose SIM1 call cost to view the cost of the last call and the cost of all calls, reset the call cost, modify the
maximum cost allowed, and/or set the call tariff.
Note: The call cost function relates to the SIM card. Some SIM cards do not support this function. The PIN2 is
provided by the network operator. To obtain the PIN2, contact the network operator.
SIM1 text msg. Counter
Choose SIM1 text msg. counter to set the number of short messages sent and the number of short messages
Note: This function does not relate to the SIM card. The number of short messages sent and the number of short
messages received do not change even after the SIM card is replaced.
Note: The call history settings of SIM card 2 are the same as SIM card 1.
SIM1 GPRS counter
Access this menu to view GPRS rate you’ve sent or received or to reset counter.
Note: The call history setting of slave card is the same as master card.
Power: To activate or deactivate Bluetooth as needed.
Visibility: set Bluetooth visibility on/off.
My device: Access this item to search new devices.
Inquiry audio device: To search audio device automatically.
My name: set Bluetooth name through this item.
Advanced: Access this item to set Audio path, storage position, etc.
Internet & STK
This function enables you to view the internet. Your phone will ask you with existed way. You can start to view
only by starting corresponding way.
Homepage: indicates the default website of the internet
Bookmarks: used to save most commonly-used websites
Recent Pages: browse the record of the recently browsed web pages
Input Address: input the website to be searched and press finish button to access to the network directly
Service Inbox: save the short messages sent from the website
Settings: set up WAP-related service
Note: Consulting the local network operator for related fee and specific setup.
STK service is the tool kit of SIM card. This phone supports the service function .The specific items are
depended by SIM card and network. Service menu will be auto added to the phone menu when supported by
network and SIM card.
Conn. Management: If your phone is connected with others devices, you can manage the connecting status
through this item. If you phone isn’t connected with other devices, it would display ‘no connection’ when you
access this item.
Data account: Set GSM、GPRS account parameter.
*Send and receive: Send or receive an Email.
*Write Email: Write an email.
*Inbox: New email you’ve received.
*Outbox: The email you’ve sent.
*Sent: The message you’ve sent to others.
*Drafts: The Emails you haven’t finished were stored there.
*Clear mailbox: To clear the mailbox.
*Delete marked Email: Delete all Emails you’ve marked.
*Email account:
:You can activate the Email account reserved in the phone or add new account.
*Templates: Some templates are available for you to write Email.
Image viewer
You can select image/photo folders in Memory card/phone. The image viewer enables you view, send, rename or
delete your pictures. And you can set the image you like as wallpaper, Screen saver, power on/off display or
caller picture
Video player
This function enables you play, send, rename, delete, delete all files, rank, save about your video and movies.
Photo editor
Access this function to edit photos.
AB repeater
Select files you’ve recorded and play it.
Sound recorder
The phone support WAV and AMR. The AMR takes the compression algorithm. So in the same memory
condition, it has longer recording time than WAV.
Because of having super recording time, user can choose recording format to record from “option” which can be
stored to the phone memory and memory card.
Schedule FM Radio
Access this function to set time, channels and so on, so that you can record a FM program on a certain time
Melody composer
You can press number key to compose melody. After finishing composing, you can play the melody, set play
speed and select different instrument to play the melody.
Slide show
Select image file and play it.
This function enables you take a picture you want. Roll the phone to align the camera to the picture and then
press OK key, which the picture will be stored in the album. .
Select “option” and you can set some paramount of camera or scan the pictures you’ve taken in gallery and view
the storage status.
Video recorder
This function enables you to record dynamic pictures. Adapt the VCR to the scene or the figure, the press OK to
start or pause recording. Press STOP to end recording. The phone will prompt you save or not.
FM radio
Your phone is equipped with an FM radio. You can use the application as a traditional FM radio with automatic
tuning and saved channels. You can listen to it while running other applications. You can press I/- and O/+ to
decrease or increase volume. Or you can press I/- and O/+ to decrease or increase volume.
Audio player
Access this interface to listen to music, you can use optical mouse to perform the following functions: Play or
Pause, Stop, last song and next song. You can press I/- and O/+ to decrease or increase volume. Or you can press
up/down side key to tune volume.
Java is a folder where downloaded games and applications are stored. You can log on eBuddy, Opera mini,
Yamee and Skype through this item.
File manager
The phone provides a certain space for users to manage files and supports the T-Flash card. You can use the file
manager to conveniently manage various directories and files on the phone and the T-Flash card.
Choose File manager to enter the root directory of the memory. The root directory will list the default folders,
new folders and user files. When the mobile phone is powered on for the first time or when you have not
changed the directory, the root directory contains the default folders only.
You can use this function to format all the data in the memory. The system will re-create a default folder. The
formatted data cannot be recovered. Therefore, think twice before using the formatting function.
Connect WLAN
Disable WLAN: When the phone is connecting WLAN, you can select this button to cut or reconnect WLAN
WLAN status: When open it, you can see the WLAN connect status.
Search for networks: Select Search for networks→Select the displayed network→Select connect→Input
the code of the network→Press OK key→Select done→After the WLAN activated, press back.
Then you can check the WLAN status.
Access points: Display the all WLAN nearby
Using WLAN
Internet&STK: Open the Internet&Stk→Open Internet service→Select Setting→Select WLAN . Then
you will use the WLAN to enter Internet
MSN&Yahoo&Facebook&Google: Open these program→Setting→Network Settings→WIFI.
Dual SIM Card Settings
Dual SIM open: Both SIM cards are standby if you set this option.
Only SIM1 open: Only SIM card 1 can be identified if you set this option.
Only SIM2 open: Only SIM card 2 can be identified if you set this option.
Flight mode: You can set the phone to Flight mode.
Phone Settings
Time and date: set the date format, the time format, and detail time of the location.
Language: Select the display language for the mobile phone.
Preferred input method: Select an input method as preferred method.
Schedule power on/off: Set the time when the mobile phone will be automatically powered on or off.
Alert: Before entering an area where the use of mobile phones is forbidden, make sure that the
scheduled power-on function is deactivated to avoid accidents.
Encoding: Select one of them.
Shortcuts: select some function as shortcuts to display on idle screen.
Greeting text: set greeting text and its status.
UART settings: Select SIM1 or SIM2.
Optical finger navigation: Set OFN sensitivity and vibrator.
Swing-sway sense: Set swing-sway status on audio player, FM radio, wallpaper and sound effect.
Call settings
Caller ID: You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set by the
network is chosen.
Note: This function relates to the network. If you select Hide ID, dialing may fail. Therefore, make sure that calls
can be normally dialed before you choose Hide ID.
◆ Call waiting: : After you choose Activate, the mobile phone will contact the network. A moment later, the
network will make a response and send a message to acknowledge your operation. If the call waiting function is
activated, the network will alert you and the mobile phone screen will display the incoming call number if others
are calling you while you are already in a conversation.
Call diverts: this network function enables you to forward incoming calls to another number you have
previously specified.
Call barring: The call barring function enables you to bar calls as needed. When setting this function, you
need to use a network barring code, which can be obtained from the network operator. If the code is
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Closed user group: This function requires network support. For details, consult the local network operator.
Note: SIM on the service is required.
Advanced setup
Blacklist: He or she can’t call you if you add his or her number to blacklist.
Auto redial: Set it to On or Off to enable or disable auto redial. If you set Auto redial to On, the mobile
phone will automatically redial the number a moment later if the called party does not reply. The number
of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other
numbers. To end the auto redial process, press the End key.
Note: This function requires support from the network operator to which the SIM card is registered.
Background sound:
:Set background sound status and effect as needed.
Call time display: To display call time or not in a call.
Call time reminder: To set single or circle tone in a call to make you know the time.
Auto quick end: A call would end at a time you’ve set if you set the auto quick status to on.
Reject by SMS: To reject the call by replying him/her a short message.
Network Settings
Contact the network operator to obtain the following network services:
Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
When Network selection mode is set to Automatic, the mobile phone will prefer the network where the
SIM card is registered. When Network selection mode is set to Manual, you need to select the network
operator's network where the SIM card is registered.
Preferences: Select the preferred networks. By default, the network where the current SIM card is registered
will be displayed.
Security Settings
This function provides you with related settings about safety use
SIM1 lock: To set the SIM1 lock, you need to input the PIN. You can set the SIM lock only after inputting
the correct PIN. If you set SIM1 lock to On, you need to input the PIN each time you power on the mobile
phone. In the case you input a wrong PIN for three consecutive times, you need to input the PIN
Unblocking Key (PUK). The PUK is used to unlock and change the locked PIN. To obtain the PUK,
contact the network operator.
Fixed dial: This function requires the SIM card's support and the network operator's support. When the fixed
dial function is activated, you can dial only the numbers in the fixed dial list. To activate the fixed dial
function, you need to input the PIN2.
Barred dial: Activate or deactivate the barring of some or all calls. This function requires the SIM card's
Change password: To change the password.
Phone lock: The function enables you to lock/unlock the phone. Entering password to switch on or off the
phone. Password is required when the phone is locked. The password is 4 to 8 digits.
Auto keypad lock: The function enables you to lock/unlock the keypad. Setting the auto locking time that 5s,
30s, 1min or 5mins is available. The keypad will be auto locked with no operation during the period.
Change password: to change the password.
Certificate manager: a list of certificate.
Mobile tracker: the initial password is 1234. Set the Guard Theft status to on, and edit the Receiver numbers,
Sent Name, message content , after that if the SIM card is replaced (including the phone being stolen),
every time the phone be turned on, it will automatically send a stolen information to the preset Receiver
numbers, which includes the card number being used in your phone illegally.
Restore Factory Settings
Choose Settings > Restore factory settings to restore the factory settings. Input the phone lock code and then
select OK or press the Left soft key.
Note: The initial phone lock code is 1234.
The main menu customize function enables you to choose the functions you need to display on the main menu.
And you can select images and set them as wallpaper, screen saver, power on/off display. You can show date and
time on the screen or shut down this function and you can set duration of LCD light time.
Choosing appointment, telephone and celebrated day to create new memo, which you can view, add, edit, delete,
delete overdue task, delete all, jump to date, send route and saved as file. If you have set the alarm for the memo,
alarm will sound when time is up, the content of memo will display at the same time.
Five alarm clocks are set but deactivated by default. You can activate one, multiple or all of them as needed. For
each alarm clock, the ringing date and the ringing time can be set. When the preset alert time is up, the mobile
phone gives off an alert tone whereas the current date and time blinks on the screen. Select Stop to stop the ring
or Snooze to temporarily stop the ring. If you select Snooze, the alarm clock will ring four minutes later.
The calculator can add, subtract, multiply and divide. To use the calculator:
Use optical mouse to select +, -, ×, ÷, =.
Press right soft key to delete the figure.
Note: This calculator provides limited precision and is only applicable to simple arithmetic calculation.
Unit converter
To exchange between Kg and Pound, Km and Mile.
Currency converter
To store exchange rate, press “OK”, then choose exchange rate setup. Input one rate and press OK. Entering the
money amount and press OK, and then choosing exchange to foreign currency.
World clock
To view city of each time zone, corresponding date and time will display at the bottom of the screen. Press
optical mouse to choose to view cities. Press Left soft key to switch on or off daylight saving time of other cities.
You can record some information in this menu.
Ebook reader
Ebook enables you to read TXT file. Through the USB connecting line putting files to Ebook folder of phone
and T-Flash card. Users can find a folder and open it to read text directly.
Stopwatch is simple application for measuring time with possibility to register several results and
suspend/resume measurement.
User profile
The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the
specific events and environments.
Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall
into seven scenarios: General, Meeting, Outdoor, Indoor, Silent, Headset, and Bluetooth.
When you insert an earpiece to the mobile phone, the mobile phone automatically enters the Headset mode.
There is no option for activating the Headset mode on the screen. For details on operation, refer to General. If
you set Headset > Customize > Answer mode to Auto, incoming calls will be automatically answered.
Select Activate to activate the selected mode.
After choosing one of the above five modes, select Customize to edit the following items:
Tone setup: Set the incoming call tone, power-on prompt tone, power-off prompt tone, message tone, and
keypad tone.
Volume: Set the volume of the conversation tone, the ring tone, the keypad tone.
Alert type: Select ring, vibrate, ring and vibrate, or ring after vibrate mode.
Ring type: Set the ring type to Single, Repeat or Ascending.
Extra tone: Activate or deactivate the warning tone, error tone, network connection tone, and conversation
start tone.
Answer mode: Set whether to answer incoming calls by pressing any key.
After setting all the above items, choose the mode and then select On.
Note: The mobile phone automatically enters the Headset mode when you insert the earpiece.
Four games are embedded in the mobile phone. For specific operation, please refer to the “help” option of each
Log on MSN through this item.
Log on Yahoo through a web.
Log on Facebook through a web.
Log on Twitter through a web.
Log on Google through a web.
Lock keypad
Select this function to lock keypad. To unlock keypad, you need to short press power control button.
Power off
Select this function to power off the phone. To power on the phone, you need to press power control button for 2
to 3 seconds.
VII. Operating instructions of editor
Your phone provides you with different input methods for the convenience of using other function. You can
enter texts by keypad at anywhere requiring entering texts. Enter function setting > Phone setting > Default input
method to choose a default input method.
English letters and figure input
You can input English letters such as A , a and digit 1 by choosing different input method “ABC、abc、123” .
Symbol input
Press * key to into the interface of inputting symbol, when the phone not under the interface of symbol.
Transfer direction keys to move the cursor to desired symbol, press OK key to select it.
VIII. Application of USB storage function
Precautions before using
Please maintain correct operation of USB equipment connection and disconnection.
Please don't use windows formatting command to carry on the format operation to the mobile disk of cell
phone; otherwise, it will result in the damage that can't be repaired any more.
USB operation environment:
◈ Windows2000 / XP.
◈ For other operating systems, it may require the installation of USB driver before successfully creating
the connection of PC and cell phone.
Formattati: Elenchi puntati e
IX. Appendix 1
The phone fail to power
SIM card error
Possible cause
1、 Check that the battery is charged;
2、 Check that the battery is installed correctly.
1、 Check whether the SIM card is dirty. If the card is dirty, clean it;
2、 Reinstall the SIM card;
3、 If the SIM card is damaged, replace the SIM card.
Weak signal
Check that the signal intensity indicator on the screen. 4 bars indicate a
strong signal, and 2 bars or less indicate a weak signal.
Call initiation fails
1、 You may set the Hide Caller ID but the network operator does not
support this service;
2、 A strong signal interference may exist;
3、 You may activate the Call Barring function;
4、 You may activate Line 2 but the network operator does not support this
Battery charge fails
1、The battery may have been excessively discharged. To charge the battery,
it is necessary to connect it to a charger for a certain period of time;
2、The battery may be deteriorated.
Cannot connect to the
1、Check whether the signal is too week or wireless interference exists
2、Check whether the SIM card is installed correctly, poor connection exists,
or the SIM card is damaged. If the SIM card is damaged, please contact the
network operator.
Photos shot too dark
1、The brightness is set too low;
2、The ambient light is too dark.
Photos shot too blurred
1、The object shot is moving;
2、Your hand shakes when the shutter is pressed.
Photos shot is distorted
The object shot is too near to the lens.
Cannot access the
service menu
The standby picture
can’t be displayed
X. Appendix II
The SIM card may not support the service.
Maybe the picture is extra of the size.
Short Message Service
Enhanced Message Service
Subscriber Identity Module
Global System for Mobile Communication
Personal Identity Number
PIN Unblocking Key
International Mobile Equipment Identity
Cell Broadcast
General Packet Radio Service
Multimedia Message service
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF