R-78E-1.0 - RECOM Power
• Efficiency up to 91%, no need for heatsinks!
Features
• Pin-out compatible with LM78XX Linear Regs.
DC/DC Converter
• Low profile (L*W*H=11.6*8.5*10.4mm)
Switching
Regulator
• Wide input range (7V - 28V)
• Short Circuit Protection
R-78E-1.0
• IEC/EN60950-1, Am2 Certified
Description
The R-78E series is a switching regulator module that has been designed to offer all the advantages of a
switching regulator (high efficiency, wide input range, accurate output voltage regulation) but with a low
cost for production quantities. Due to the R-78E’s high efficiency of up to 91% at an output voltage of
5V/1A at the output, no heat sink is required. The compact TO- 220 compatible SIP3 package measures
only 11.6 x 8.5 x 10.4 mm, so it saves precious board space. The warranty is 3 years.
1.0 AMP
SIP3
Single
Output
3Y
EAR
3
wa
rranty
Selection Guide
Part
Number
R-78E3.3-1.0
R-78E5.0-1.0
Input
Output
Output
Efficiency
Max. Capacitive
Voltage Range
Voltage
Current
typ @ min Vin.
Load
[VDC][VDC] [mA] [%]
[µF]
7 - 28
3.3
1000
87
220
8 - 28
5.0
1000
91
220
Specifications (measured at ta= 25°C, full load, nominal input voltage and after warm-up)
BASIC CHARACTERISTICS
Parameter
Condition
Min.
Typ.
Max.
3.3V
5.0V
7VDC
8VDC
24VDC
28VDC
Input Current
min. Vin
1.5mA
No Load Input Current
typ. Vin
1.5mA
Vin= 12VDC
330kHz
Input Voltage Range
Operating Frequency
1000mA
typ. Vin, full load and 20MHz BW limited
Output Ripple and Noise
120mVp-p
IEC60950-1 Certified
EN60950-1 Certified
Efficiency vs. Load
R-78E3.3-1.0
R-78E5.0-1.0
100
100
95
Efficiency [%]
Efficiency [%]
95
90
85
7V
12V
24V
28V
80
75
90
85
80
70
0
0.2
0.4
0.6
Output Current [A]
www.recom-power.com
0.8
8V
12V
24V
28V
75
1.0
0
0.2
0.4
0.6
0.8
1.0
Output Current [A]
REV.: 3/2016
I-1
R-78E-1.0
DC/DC Converter
Series
Specifications (measured at ta= 25°C, full load, nominal input voltage and after warm-up)
REGULATIONS
Parameter
Condition
Value
Output Voltage Accuracy
±3% typ. / ±5% max.
Line Voltage Regulation
low line to high line, full load
±1% max.
Load Voltage Regulation
typ Vin. and 10% to 100% load
±1.5% max.
PROTECTIONS
Parameter
Condition
Value
Short Circuit Protection (SCP)
automatic recovery
Over Current Protection (OCP)
100% = 1A
200% Load
Condition
Value
ENVIRONMENTAL
Parameter
Operating Temperature Range
natural convection and with derating (see graph)
Humidity
-40°C to +85°C
non-condensing
MTBF
95%, RH max.
MIL-HDBK 217F, +25°C
Derating Graph
3875 x 103 hours
Output Power [%]
100
80
60
40
20
0
-40
0
20
40
60
80
85
100
Ambient Temperature [°C]
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Report / File Number
Information Technology Equipment, General Requirements for Safety (LVD)
LVD1603123
EMC Compliance
Information technology equipment - Radio disturbance characteristics - Limits and
methods of measurement
EMI Filter suggestion Class A and B
Condition
Standard / Criterion
with external filter
EN55022, Class A or B
L1
R-78Exx-1.0
+VIN
C1
+VOUT
C2
GND
GND
MODEL
Class A
Class B
I-2
Standard
IEC/EN60950-1, 2nd Edition, Am2:2013
C1/C2
1210 10µF, 50V MLCC
REV.: 3/2016
L1
10µH
33µH
www.recom-power.com
R-78E-1.0
DC/DC Converter
Series
Specifications (measured at ta= 25°C, full load, nominal input voltage and after warm-up)
DIMENSION and PHYSICAL CHARACTERISTICS
Parameter
Value
Case Material
Potting Material
UL94V-0, non-conductive black plastic
UL94V-0, Silicone
Package Dimension (LxWxH)
11.6 x 8.5 x 10.4mm
Package Weight
2g typ.
Dimension Drawing (mm)
embossed logo
11.6
8.5
xxxx
10.4
0.7
Marking
xxxx
1 2 3
0.25
Ø1.0 +0.15/-0
5.08
Top View
2.54
2.0
3.21
R-78Exx-1.0
4.10
0.51
R-78Exx-1.0
Bottom View
Pin Connections
Pin # Function
1 +Vin
2 GND
3 +Vout
Tolerance: xx.x= ±0.50mm
xx.xx= ±0.25mm
2.54
INSTALLATION AND APPLICATION
Standard Application:
R-78Exx-1.0
+VIN
C1
+VOUT
C2
10µF MLCC
(optional)
10µF MLCC
(optional)
GND
GND
To protect the converter during power-up, use soft start power supply.
Notes:
Note1:The R-78Exx-1.0 can`t be used as positive to negativ converter.
PACKAGING INFORMATION
Parameter
Type
Value
Packaging Dimension (LxWxH)
Tube
520 x 18.2 x 11.2mm
Packaging Quantity
42pcs.
Storage Temperature Range
-55°C to +125°C
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written
consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 3/2016
I-3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising