User Manual-SRD-852D, 1652D-ENGLISH_Web-.indb

User Manual-SRD-852D, 1652D-ENGLISH_Web-.indb
8 CHANNEL/
16 CHANNEL DVR
User Manual
SRD-852D/1652D
overview
FEATURES
The SRD DVR employs H.264 video encoding for 8 to 16 channel inputs and G.723 audio encoding for 4 channels,
and supports hard disc recording and playback as well.
These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video
and audio data.
• Provides convenient User Interface
• 8/16 CH Composite Input Connectors
• Supports CIF(S)/2CIF(M)/4CIF(L) recording formats
• Network transfer supported
• De-interlacing processor for better picture quality
• Display of HDD information and status by using HDD SMART
• CIF(S) Size Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-1652D)
• CIF(S) Size Recording in 240 (NTSC)/200 (PAL) IPS speed (SRD-852D)
• Hard Disk overwrite function
• Mass storage hard disk backup through high-speed USB 2.0
• Backup function using USB 2.0 flash memory and external CD/DVD writer
• Simultaneous Record and Playback of 8/16-channel video data
• Various Search Modes (Search by Time, Event, Backup, POS and Motion Detection)
• Various Recording Modes (Time Lapse, Event, Scheduled Recording)
• Extended Hard Disk Connection (USB 2.0)
• Alarm Interface
• Remote Monitoring function by Windows Network Viewer
2_ overview
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
8)
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. if the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
 OVERVIEW
3)
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13) Unplug this apparatus during lightning storms or when unused for long
periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
English _3
overview
BEFORE START
This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection
to other equipment, menu setup, etc.
You have to keep in mind the following notices :
• SAMSUNG retains the copyright on this manual.
• This manual cannot be copied without SAMSUNG’s prior written approval.
• We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
• Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
• Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this
DVR, check the compatibility. Consult your provider for the compatibility list.
Warning
❖ Battery
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
The following are the specifications of the battery you are using now.
• Normal voltage : 3V
CALIFORNIA USA ONLY
• Normal capacity : 170mAh
This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
• Continuous standard load : 0.2mA
“Perchlorate Material - special handling may apply,
• Operating temperature : -20°C ~ +85°C
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
(-4°F ~ +185°F)
J
 Connect the power cord into a grounded outlet.
 The Mains plug is used as a disconnect device and shall stay readily operable at any time.
 Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
❖ System Shutdown
Turning off the power while the product is in operation, or undertaking improper actions may cause damage
or malfunction to the hard drive or the product.
Please turn off the power using the Power button on the front of your DVR.
After selecting <OK> in the pop-up menu, you can pull off the power cord.
You may want to install a UPS system for safe operation in order to prevent damage caused by an
unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)
❖ Operating Temperature
The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).
This product may not work properly if you run right after a long period of storage at a temperature below the
guaranteed one.
Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand
at room temperature for a period.
Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F).
Likewise, the hard drive may not work at a temperature below the guaranteed one.
❖ Ethernet Port
This equipment is in door use and all the communication wirings are limited to inside of the building.
4_ overview
Standards Approvals
M
 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
Package Contents
Please unwrap the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
Remote Control
Power Cable
Network Viewer Software /
User Manual CD
User Manual
Remote Control Battery (AAA)
SATA Cable
HDD Fixing Screw
Bracket Fixing Screw(4EA)
Bracket Rack
English _5
 OVERVIEW
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
overview
CONTENTS
OVERVIEW
2
INSTALLATION
14
CONNECTING WITH
OTHER DEVICE
18
LIVE
23
USING THE DVR
34
6_ overview
2
3
4
8
10
12
Features
Important Safety Instructions
Before Start
Part Names and Functions (Front)
Part Names and Functions (Rear)
Remote Control
14
15
15
Checking the installation environment
Rack Installation
HDD Addition
18
18
19
19
20
21
Connecting the Video, Audio, and Monitor
Connecting the USB
Connecting POS Device
Connecting the Alarm Input/Output
Connecting the RS-485 Device
Connecting the Network
23
25
29
31
32
32
32
33
Getting Started
Live Screen Configuration
Live Mode
Spot Out
Zoom
Audio ON/OFF
Freeze
Event Monitoring
34
44
52
55
58
59
66
System Setup
Setting the Device
Setting the Recording
Setting the Event
Backup
Network Configuration
Controlling a PTZ device
SEARCH & PLAY
68
WEB VIEWER
BACKUP VIEWER
Search
Playback
73
74
75
81
85
95
95
Introducing Web Viewer
Connecting Web Viewer
Using Live Viewer
Using Search Viewer
Viewer Setup
About
Mobile Viewer
96
SEC Backup Viewer
98
101
102
105
Product Specification
Product Overview
Default Setting
Troubleshooting
 OVERVIEW
73
68
71
96
APPENDIX
98
English _7
overview
PART NAMES AND FUNCTIONS (FRONT)
SRD-852D
1
ALARM
HDD
NETWORK
2
BACKUP
3
4
REC
REC
DIGTAL VIDEO RECORDER SRD-852D
1
2
3
4
5
6
7
8
9
0
ZOOM
FREEZE BACKUP SEARCH
TELE
WIDE
VIEW
MODE
AUDIO
ALARM
PRESET
MENU
USB
DVD RECORDER
OPEN/CLOSE
10
9
RETURN
8
7
6
5
SRD-1652D
1
ALARM
HDD
NETWORK
2
BACKUP
3
4
REC
REC
DIGTAL VIDEO RECORDER SRD-1652D
1
2
3
4
5
6
7
8
ZOOM
9
10
11
12
TELE
WIDE
VIEW
13
14
15
16
MODE
AUDIO
ALARM
FREEZE BACKUP SEARCH
8_ overview
MENU
USB
OPEN/CLOSE
10
PRESET
DVD RECORDER
9
RETURN
8
7
6
5
Part Names
Functions
ALARM : Lights on when an event occurs.
HDD : Displays the normal access to HDD.
Upon access to HDD, LED repeats on and off.
LED Indicator
NETWORK : Displays both network connection and data transfer status.
BACKUP : Displays when Backup is in progress.
 OVERVIEW
REC : Lights on when recording is in progress.
PTZ : Sets PTZ Mode ON/OFF.
ZOOM(TELE) : Sets the screen to the x2 digital zoom.
Runs the TELE function in the PTZ Mode.
Camera Control
FREEZE(WIDE) : Runs the FREEZE function in the Live Mode.
Runs the WIDE function in the PTZ Mode.
BACKUP(VIEW) : Runs the BACKUP function.
Runs the Preset View function in the PTZ Mode.
SEARCH(PRESET) : Goes to the search screen.
Runs the Preset Setup function in the PTZ Mode.
REC
Starts or ends the recording.
/
Step Rewind ( ) : Used for backward frame-by-frame search while in PAUSE.
Fast Rewind () : Used for quick backward search while in Play.

Stop : Used to stop the playback.
►/
Play/Pause : Used to pause or resume the screen.
/
Fast Forward () : Used for quick forward playback.
Step Forward ( ) : Used for forward frame-by-frame search while in PAUSE.
Direction /
Select Button
Used to change a value or move the cursor up/down/left/right (
◄ ►).
Selects a menu item or executes the selected menu.
USB Port 1 / 2
Connects the USB devices.
MODE
Each time you press the button in Live mode, the screen mode will be switched in sequence.
Each time you press the button in play mode, the screen mode will be switched in sequence.
(1 live channel + (N-1) live channel)
AUDIO
Sets Audio ON/OFF.
ALARM
Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the
icon.
MENU/RETURN
Either goes to the system menu screen or moves to the upper menu from the lower menu.
Channel
Used to select channel numbers directly in the Live Mode, or numbers in the numeric input
mode.
Jog shuttle
When a scroll bar appears in each menu, acts as a scrolling.
In Play mode, - Jog : Pauses the playback and steps backward or forward.
- Shuttle : Fast playback forward or backward.
OPEN/CLOSE
Used to open and close the DVR-RW disc tray.
Power
Power LED : Displays the power ON/OFF status.
Power Button : Used to turn the DVR ON/OFF.
English _9
overview
PART NAMES AND FUNCTIONS (REAR)
SRD-852D
1
2
3 4
5
6
7
8
9
10
3 4
5
6
7
8
9
10
SRD-1652D
1
2
10_ overview
Part Names
Functions
Audio input signal port (RCA jack).
AUDIO OUT
Audio Signal Output Port (RCA jack).
VIDEO IN
Composite Video Signal Input Port (BNC type connector).
VIDEO OUT
Composite Video Signal Output Port (BNC type connector).
VGA
VGA Video Signal Output Port.
SPOT
A live screen output port, separate from the VIDEO OUT.
NETWORK
NETWORK connector port.
RS-485
Used for RS-485 communication. (TX+, TX-, RX+, RX-)
ALARM
- ALARM IN 1~16 (SRD-1652D) : Alarm Input port.
- ALARM IN 1~8 (SRD-852D) : Alarm Input port.
- ALARM RESET IN : Alarm Reset port.
- ALARM OUT 1~4 : Alarm Output port.
AC 100-240V~ IN
AC 100~240V(50~60Hz)
 OVERVIEW
AUDIO IN
English _11
overview
REMOTE CONTROL
DVR
Available after switching to DVR mode by pressing the [DVR] button on the remote control.
SEARCH
Displays the search menu.
BACKUP
Displays the Backup Menu.
OPEN/CLOSE
MODE
Changes the screen mode.
POWER
Opens or closes the CD tray.
DVR
Activates the DVR function.
Displays the Exit pop up screen.
NUMBER [0~+10]
Used as the numeric input keys, or displays a single
channel.
ID
Skip Backward (by unit time),
Slow Rewind, Slow Forward,
Skip Forward (by unit time)
Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
Move Frame
While paused, moves to the previous/next frame.
FR, STOP, PLAY/PAUSE, FF
T/W
Zooms in or out.
PTZ
Displays or ends PTZ.
SCROLL ,.
Moves the menu scroll.
MENU
Goes to the system menu screen.
RETURN
Returns to the previous screen.
Up/Down/Left/Right(▲▼◄ ►)/ENTER
Moves the cursor up/down/left/right, and runs the
Select Menu.
FREEZE
Freezes the screen temporarily.
ZOOM
AUDIO
Turns Audio on/off.
ALARM
Cancels the Alarm.
Runs the digital zoom (x2) function.
REC
Starts or ends the live recording.
VIEW
Runs the View function in the PTZ mode.
REC LOCK
Selects the recording lock function.
PRESET
Displays the Preset Setup.
Using the Numeric buttons
CHANNEL 1–9
Press each button between 1 to 9.
CHANNEL 10
Press the [+10] button first, then press the 0 button again within 3 seconds.
CHANNEL 11–16
12_ overview
Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.
MONITOR
Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control.
AUTO
Selects the screen status automatically.
ID RESET
Initializes the ID value to 00.
P.MODE
Selects the screen mode.
POWER
MONITOR
Activates the monitor function.
 OVERVIEW
Turns the monitor power on/off.
NUMBER [0~9]
Changes the system ID.
ID
Sets the ID.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
+/–
Adjusts the audio volume.
MUTE
Mutes the audio out.
MENU
Displays the Setup Menu.
Up/Down/Left/Right(▲▼◄ ►)/ENTER
Moves the cursor up/down/left/right, and runs the
Select Menu.
FREEZE
Screen Freeze.
SOURCE
Selects the input signal source.
UNDER SCAN
Displays the video screen within a screen.
PIP
Selects or deselects the PIP function.
Using the Numeric buttons
CHANNEL 1–9
Press any button among 1 to 9.
Changing the Remote Control ID
1. Press the ID button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the system [ID] button.
3. When ID input is done, press the system [ID] button again to check the setting.
M
 If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 48)
English _13
installation
Please take note of the followings before using this product.
•
•
•
•
•
•
•
•
Do not use the product outdoor.
Do not spill water or liquid in the connection part of the product.
Do not impose the system to excessive shock or force.
Do not pull out the power plug forcefully.
Do not disassemble the product on your own.
Do not exceed the rated input/output range.
Use a certified power cord only.
For the product with an input ground, use a grounded power plug.
CHECKING THE INSTALLATION ENVIRONMENT
Samsung Digital Video Recorder (“DVR” hereinafter) is a
state-of-art security device, and contains mass storage hard
disk(s) and critical circuits inside.
Temperature
Unit: ºC
One Year: 24HR X 365 DAY =8,760 HR
When the temperature rises inside the product, the product
may breakdown and the product life be shortened. Please
pay attention to the following recommendations before
installation.
Life (Unit: HOURS)
[Figure 1]
The followings are the recommendations when Samsung DVR is installed on a rack.
1. Please ensure that the rack inside is not sealed.
2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.
3. If the DVR or other devices on a rack is to be stacked as in the picture, provide a
suitable space or install a ventilating opening for air circulation.
4. For natural air convection, place the inlet at the bottom of the rack and the outlet on
top.
5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for air
circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)
6. Please maintain the temperature inside the rack or surrounding areas between 0°C ~
40°C (32°F ~ 104°F) as shown in the figure 1.
Rack Mount Instructions - The following or similar rack-mount instructions are
included with the installation instructions :
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by
the manufacturer.
[Figure 2]
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should
be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
14_ installation
RACK INSTALLATION
Install the Bracket-Rack as shown in the figure, and then fasten the
screws on both sides (2 screws on each side).
 Fix the screws not to be loosened by vibrations.
You can install additional HDDs.
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product
damage.
Please consult your provider for further information on HDD installation since improper installation or settings may
damage the product.
 Number of HDDs supported : Default 1 HDD + Up to 3 HDDs added
 Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
 By factory default, the unit is equipped with one HDD.
J
 Cautions for data loss (HDD care)
Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this DVR product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user’s carelessness or miss use..
 Cases might cause damage to HDD or recorded data
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
Data may be lost due to external impacts during disassembly or installation of the DVR.
HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation.
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.
Cautions when adding a HDD
1. When adding a HDD, ensure that the cable does not get caught or the insulation does not come off.
2. Pay attention so as not to lose the disassembly screws or accessories.
 If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.
3. Please check the HDD compatibility before adding a HDD.
 Please contact your nearest dealer to obtain the list of compatible devices.
English _15
 INSTALLATION
HDD ADDITION
installation
If adding HDDs
 The following figures are based on Model SRD-1652D.
1. First, loosen the screws on both sides and remove
the cover.
2. Disconnect the power and HDD Signal cable from
the existing HDDs, then loosen the screws (x4) in
the left/right and upper sides and remove the upper
brackets.
Cover
Upper Bracket
Lower Bracket
3. Install HDDs (x3) on the upper bracket and fix them
with screws.
Upper Bracket
Lower Bracket
16_ installation
4. When the installation of additional HDDs is done,
insert the lower and upper brackets into the DVR
and fix them with the provided screws.
 INSTALLATION
5. When the installation of additional HDDs is done,
connect the power cable and connect the HDD
data cables (SATA Cable) to connectors c ~ f on
the main board.
 Note that the number of a HDD data calbe is nothing to
do with operation of the HDD. Just make arrangements
of the connectors considering the length of each
connector.
6. Check if the connectors are properly connected
and there is no problem with wiring, and close the
cover and fix it with screws.
Cover
English _17
connecting with other device
M
 The following figures are based on Model SRD-1652D.
CONNECTING THE VIDEO, AUDIO, AND MONITOR
AC 100-240V~IN
AUDIO OUT
VIDEO IN
VIDEO IN
SPOT
AUDIO IN
VIDEO OUT
(composite)
VIDEO OUT
(VGA)
CONNECTING THE USB
1. By factory default, a USB port is provided for external connection.
2. You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.
3. If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >
Storage Device”. (Page 46)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
J
 If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
18_ connecting with other device
CONNECTING POS DEVICE
1. You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
2. Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 49)
 CONNECTING WITH OTHER DEVICE
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
1. Alarm In Port for SRD-852D
2. Alarm In Port for SRD-1652D
3. Alarm Out Port
English _19
connecting with other device
• ALARM IN 1 ~ 8 (SRD-852D) : Alarm Input Port
• ALARM IN 1 ~ 16 (SRD-1652D) : Alarm Input Port
• ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes
sensing.
• ALARM OUT 1 ~ 4 : Alarm Output Port
ALARM OUT
ALARM IN
ALARM IN
CONNECTING THE RS-485 DEVICE
Connect the RS-485 device through the back port.
M
 You can connect and control the PTZ camera which supports the RS-485 communication.
• Transfer Type : You may select either Half Duplex or
Full Duplex as the data transfer type.
• Baud Rate : Supported Baud rates are 600/1200/
2400/4800/9600/19200/38400.
M
 Check if the RS-485 device is compatible with the
product first.
 Pay attention not to change the polarity (+/–) of the
RS-485 device when connecting it.
 Depending on camera’s type, connection polarity can be
different.
For further information, refer to the respective PTZ
Camera’s documentation.
PTZ device
Rear
Half Duplex Type
Data (–)
Data (+)
Tx(–)
Tx(+)
Full Duplex Type
Rx(+)
Rx(–)
Tx(–)
Tx(+)
20_ connecting with other device
Rx(–)
Rx(+)
CONNECTING THE NETWORK
Connecting to Internet through Ethernet (10/100BaseT)
INTERNET
Back Bone
Hub/Switcher
Hub/Switcher
Windows
Network Viewer
Connecting to the Internet using the router
INTERNET
Router
xDSL or Cable
Modem
xDSL or Cable
Modem
External Remote
PC
DDNS Server
(Data Center)
English _21
 CONNECTING WITH OTHER DEVICE
RJ-45 Ethernet Cable
(Direct Cable)
connecting with other device
Connecting to Internet through ADSL
RJ-45 Ethernet Cable
(Direct Cable)
INTERNET
Phone(ADSL) Line
ADSL MODEM
Hub/Switcher
Windows
Network Viewer
22_ connecting with other device
live
GETTING STARTED
Starting the system
 LIVE
1. Connect the power cable of the DVR to the wall outlet.
2. Press the Power button on the front panel.
REC
3. You will see the initialization screen.
The initialization process will last about 1 minute.
If a new HDD is installed, the initialization process may take
longer.
REC
4. The live screen appears with a beep.
2011-01-01 01:10:25
2011-01-01
01:10:25
Shutting Down the System
You can shut down the system only if you have logged in to the DVR.
You require permission to shut down the system if you are not logged in as admin.
1. Press the [POWER] button on the remote control or the
front panel, or right-click to display the context sensitive
menu and select <Shutdown>.
2011-01-01 01:10:25
2. The “Shutdown” confirmation window appears.
Shutdown
3. Use the arrow keys on the remote control or the front panel
to move to <OK> and press the [ENTER] button or click
<OK>.
The system will shut down.
Are you sure to shutdown?
OK
Cancel
2011-01-01
01:10:25
M
 For the permission management, refer to “Permission
Management > Setting Permissions”. (Page 39)
English _23
live
Login
To access a DVR or restricted menu, you should have logged in to the DVR.
1. In live mode, right-click any area of the screen.
You will see the context sensitive menu as in the right
figure.
Scene Mode
2011-01-01 01:10:25
ZOOM
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
2011-01-01
01:10:25
2. Click <Login>.
The login dialog appears.
You can also see the login dialog to access a desired menu
by pressing the [MENU] button on the remote control or
the front panel.
 The login dialog will also appear if you press a menu button on
the remote control or the front panel of the DVR when the
corresponding menu requires logging in.
 By default, initial ID and password are set to “admin”, and
2011-01-01 01:10:25
Login
x ID
admin
x Password
OK
Cancel
2011-01-01
01:10:25
“4321”.
M
 For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 39)
Locking All Buttons
This will restrict access to all buttons available in the DVR.
1. In Live mode, press buttons in the order of [STOP (@)]
[FREEZE] [STOP (@)] [FREEZE] [MENU].
All buttons will be locked.
2. In the lock condition, press any button to display a dialog
where you are prompted to enter the password for
unlocking the buttons.
The button lock will be released if you enter the admin
password.
2011-01-01 01:10:25
Key Lock Password
x ID
OK
2011-01-01
01:10:25
24_ live
admin
x Password
Cancel
LIVE SCREEN CONFIGURATION
Icons on the Live Screen
You can check the status or operation of the DVR with the icons on the live screen.
2011-01-01 00:00:01
 LIVE
CAM 01
Name
Description
Current Date, Time
Displays the current time and date.
Login Information
When you are logged in, the “LOG ON” icon will be displayed.
Displayed if the zoom function is activated.
Displayed if you press the Pause button.
Screen Mode
Displayed in Auto Sequence mode where all channels are switched at the
specific time interval.
Displayed if the recording is in process.
M To cancel the recording, enter the password.
Displayed if there is a problem with the cooling fan.
Displayed if the HDD is full and the DVR has an insufficient space to record.
System Operation
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD needs a technical examination.
Displayed if a new firmware is found from the network.
Video Input Status
Camera Name/ Channel
Displayed if no input is entered in the condition that the camera is set to <ON>.
Nothing will be displayed on the screen if the camera is set to <OFF>.
Displays the camera name and the changed channel, if any.
Displays the resolution of the recording screen. (Page 54)
Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Camera Operation
Displays AUDIO ON/MUTE.
Not displayed in video mode if deactivated.
If the sensor is set to <ON>, the input signal will be displayed on the screen of
the connected channel.
Displayed if a motion detected in the condition that the motion detection is set to
<ON>.
Displays the current record mode from Record/Event/Schedule.
English _25
live
Error Information
• If the internal HDD is not connected, the “NO HDD”(
) message will appear; if there occurs a problem,
) message in the top left corner. In this case, make sure you contact the
you will see the “HDD FAIL”(
service center for assistance as this may cause a failure of recording, playback or backup.
• If the cooling fan does not work properly or has a problem, the <Fan Information> window will appear and
the fan error icon ( ) will be displayed on the top left corner. In this case, check to see if the internal fan
works.
As a fan error can shorten the product life, make sure you contact the service center for assistance.
M
 If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.
Live Screen Menu
In addition to the buttons on the front panel or the remote control, you can access a desired menu by rightclicking the mouse any area in live mode.
The context sensitive menu that appears by right-clicking the screen may differ, depending on the login/
logout, screen split mode and DVD operation mode.
M
 Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.
Scene Mode
Scene Mode
2011-01-01 01:10:25
2011-01-01 01:10:25
ZOOM
PTZ Control
Audio Off
ZOOM
Freeze
Audio
Stop Alarm
Freeze
Record
Stop Alarm
Record
Play
Play
Search
Search
Backup
Backup
Main Menu
Main Menu
Shutdown
Shutdown
Hide Launcher
Hide Launcher
Login
Login
2011-01-01
01:10:25
2011-01-01
01:10:25
< Split Mode Menu >
< Single Mode Menu >
Split Mode Menu
The context sensitive menu in split mode differs, depending on the login/logout status.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Scene Mode
Spot Out
ZOOM
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2011-01-01
01:10:25
26_ live
2011-01-01 01:10:25
Menu
Description
Refer to “Live Mode”. (Page 29)
Spot Out
Refer to “Spot Out”. (Page 31)
ZOOM
Refer to “Zoom”. (Page 32)
Audio On/Off
Refer to “Audio ON/OFF”. (Page 32)
Freeze
Refer to “Freeze”. (Page 32)
Stop Alarm
Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 33)
Record/Stop
Starts/stops the standard recording.
Play
Plays the search result (data). Refer to “Search & Play > Play”. (Page 71)
Search
Refer to “Search & Play > Search”. (Page 68)
Backup
Refer to “Using the DVR > Setting the Backup”. (Page 58)
Main Menu
Accesses the main menu. Refer to the Using the DVR section. (Page 34)
Shutdown
Turns down the DVR.
Show/Hide Launcher
Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 28)
Login/Logout
You can log in or out.
Single Mode Menu
The single mode menu is available only in Single Mode.
The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode.
2011-01-01 01:10:25
1
Full Screen
Spot Out
3
2
PTZ Control
ZOOM
Audio
Freeze
Stop Alarm
Record
Play
Shutdown
Hide Launcher
Logout
2011-01-01
01:10:25
PTZ
Alarm
Freeze
Menu
Description
Full Screen
Select and click a desired channel in Split mode to switch to the full screen of the selected
channel.
PTZ Control
Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode.
(Page 66)
ZOOM
Enlarges the selected image. (Page 32)
English _27
 LIVE
Scene Mode
live
View the Launcher Menu
The Launcher menu appears on the bottom of the live screen.
1. In Live mode, right-click to display the context menu and
select <Show Launcher>.
2011-01-01 01:10:25
2. Move the cursor to the bottom and click a desired item in
the Launcher menu.
M
 If no input is entered for 10 seconds, the menu will disappear.
 The Launcher menu can be accessed only by using the mouse.
 SRD-852D do not support the 16-split screen mode.
2011-01-01
01:10:25
PTZ
Menu
28_ live
Alarm
Freeze
Description
Date/Time
Displays the current time and date.
The indication of AM/PM is displayed if you set 12 hours for the time format in
“System > Date/Time/Language > Time”. (Page 34)
Screen Mode
Press this button to switch the screen mode in sequence.
The current mode is highlighted in white.
Menu Expansion Button
Click to display the hidden menu to the right.
Audio
Turns ON/OFF the sound of the selected channel.
Zoom
Enlarges the selected area. This is available only in Single Live mode.
PTZ
Runs the PTZ Control launcher. This is available only in Single Live mode.
Alarm
Stops the alarm if it's activated.
Freeze
Freezes the Live screen temporarily.
Play
Enters Play mode if a file to play exist, and if not, enters Search mode.
Record
Start/End recording the Live screen.
LIVE MODE
SRD-1652D display Live images from 16 channels in a total of 8 layout of split screens.
Switching the screen mode
M
 SRD-852D do not support the 16-split screen mode.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
16-split mode
CH1
CH6
CH2
CH3
CH2
CH1
CH4
CH5
CH6
CH7
CH8
CH9
CH7
CH2
CH3
CH6
CH4
CH8
CH8
CH10
8-split mode
CH2
CH3
CH4
4-split mode
CH3
CH3
CH1
9-split mode
CH2
CH5
CH1
CH4
CH4
CH5
CH6
6-split mode
CH5
CH7
CH11
CH1
CH9
CH12
CH13
13-split mode
CH2
CH1
PIP
CH1
Auto Sequence
Switching the split mode
SRD-1652D display 16 Live images in the sequence of Single, 4-split and 9-split modes.
Auto Sequence
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
Single mode
M
1
CH2
CH1
16
CH2
CH1
CH2
CH3
CH2
CH1
CH3
CH4
CH3
CH3
CH4
CH4
4-split mode
CH1
13-16
CH4
9-12
5-8
1-4
CH1
CH2
CH2
CH4
CH4
CH5
CH5
CH7
CH7
CH3
CH3
CH6
CH6
CH8
CH8
CH9
CH9
10-16
1-9
9-split mode
 In Single mode, If you have set <SEQ-Dwell Time> in “Setting the Device > Camera”, Auto Sequence will be
conducted at the set interval. (Page 44)
 In a split mode, If you have set <Multi CH SEQ Time> in “Setting the Device > Monitor”, Auto Sequence will be
conducted at the set interval. (Page 50)
English _29
 LIVE
To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in
the context menu.
Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the
launcher menu items.
live
Manual Switching
Press the left/right button on the front panel or the remote control, or click the arrow <◄/►> key to move to
the next split mode.
• If pressing the right [►] button in 9-split mode :
9-split (CH 1~9) mode 9-split (CH 10~16) mode
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH13
CH14
Auto Sequence
CH12
CH1
CH15
CH1
CH2
CH2
CH4
CH4
CH5
CH5
CH7
CH16
CH7
• If pressing the right [►] button in 4-split mode :
Channel (CH 1~4) Channel (CH 5~8) Channel (CH 9~12)
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH3
CH3
CH6
CH6
CH8
CH8
CH9
CH9
10-16
1-9
Channel (CH 13~16)
CH9
CH10
CH11
CH12
Auto Sequence
CH13
CH14
CH15
CH16
CH1
CH2
CH1
CH2
CH1
CH2
CH3
CH2
CH1
CH4
CH3
CH3
CH4
CH4
13-16
9-12
5-8
1-4
CH4
CH3
Channel Setting
You can display the channel in a desired area of a split screen.
1. Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen.
2. Click a camera name to display a channel list where you can select a different channel.
3. Select a desired channel and click it.
The current channel will be switched to the selected one.
Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also
change the channel position.
 Ex : if switching CH 1 to CH 7
30_ live
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH7
CH2
CH3
CH4
CH5
CH6
CH1
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to “Remote Control > Using the numeric buttons”. (Page 13)
 Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
 LIVE
CH1
CH3
SPOT OUT
The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out
port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
1. In Live mode, right-click any area on the screen.
The Live menu appears.
2. Click Spot Out.
Supports Auto Sequence and Single modes.
Scene Mode
Spot Out
ZOOM
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2011-01-01 01:10:25
Spot Out 1
Auto Sequence
Single
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
2011-01-01
01:10:25
< Multichannel Live Menu >
English _31
live
ZOOM
This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to
enlarge it twice.
1. Select <ZOOM> in the right-click menu.
Press the [ZOOM] button on the front panel or the remote control, or simply click <
menu. The zoom box appears.
> in the launcher
2. Use the direction keys, or drag and drop to specify an area to enlarge.
3. Press the [ENTER] button, or double-click the selected area to enlarge it twice.
 In the enlarged image, use the direction buttons (
◄ ►) on the remote control or the front panel to move the
enlarged area.
4. Press the [ZOOM] button on the front panel or the remote control, or simply click <
menu to release the zoom.
> in the launcher
2011-01-01 01:10:25
AUDIO ON/OFF
You can turn the sound on/off corresponding to the channel in Live mode.
AUDIO ON/OFF in Single mode
Click the audio icon (
to turn it on/off.
M
) on the screen, or press the [AUDIO] button on the front panel or the remote control
 Only the channel where <AUDIO> is set to <ON> in “Device > Camera” displays the audio icon (
) in Live
mode that you can use to turn the sound on/off.
FREEZE
This is available only in Live mode, this pauses playing the Live image temporarily.
1. Press the [FREEZE] button on the front panel or the remote control, or click <
menu.
The playback of the image is stopped temporarily.
2. Press the [FREEZE] button again, or click <
This will release the freeze.
32_ live
Freeze
>.
Freeze
> in the launcher
EVENT MONITORING
This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 50)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
- 10~16 events : 16-split mode
Event occurrence
5 seconds
Stop alarm
CH1
 Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
event occurred in CH 1.
Event occurrence
4 seconds
9 seconds
Stop alarm
CH1
CH2
CH1
M
 Press the [ALARM] button to reset the alarm settings and to release the event mode.
 If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will
be performed.
 This will also apply to the Spot Out monitor.
English _33
 LIVE
• If the second event occurs within the set time of <Event Display>, the first event will last until the second
one is terminated. (Page 50)
 Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
using the DVR
You can setup the system properties, devices, and options for recording, event,
backup and network.
SYSTEM SETUP
You can setup Date/Time/Language, Permission, System Properties and Log.
Date/Time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for
the interface on the screen.
Setting the Date/Time/Language
Set the Date/Time/Language
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or on the
front panel.
2011-01-01 01:10:25
 If not logged in, it prompts with login window.
Refer to “Login”. (Page 24)
2. Use the left/right buttons (◄ ►) to select the <System>.
System property setup menu is selected.
3. Use the up/down buttons (
) to select <Date/Time/
Language> and press the [ENTER] button.
Logout
System
4. Select <Date/Time/Language>.
A dialog to setup Date, Time and Language.
Date/Time/Language
Permission Management
System Management
5. Use direction buttons (
◄ ►) to select an item to set
and make your changes.
• Date : Sets the date that will appear on the screen.
You can select the date format.
• Time : Sets the time and its format that will appear on the
screen.
Select either one from <24 Hours, 12 Hours (AM/PM)>.
• Time Zone : Sets the time zone of your area based on the
Greenwich Mean Time (GMT).
 GMT (Greenwich Mean Time) is standard World Time and the
basis of world time zone.
Log Information
Date/Time/Language
Date/Time/Language
x Date
Holiday
2011-01-01
YYYY-MM-DD
x Time
08:14:24
24 Hours
x Time Zone
GMT
x Time Sync.
x DST
x Language
Setup
Dec First (Sun) 0
Dec First (Sun) 0
English
OK
Cancel
• Time Sync. : You can set the DVR’s current time
synchronized to a selected <Time Server> regularly if you select to use <Time Server>.
In this case, <Date/Time/Language> setup does not allow time adjustment.
34_ using the DVR
Exit
- Time Server : Enter an IP or URL address of the time
Date/Time/Language
server.
Date/Time/Language
Holiday
- Last Sync Time : Displays the most recent
Time Synchronization Setup
synchronization time from the selected time server.
- Activate as Server : Set to <Use> to allow the DVR to act
as a Time Server for other DVRs.
• DST : Set up Daylight Saving Time with its period to make
the time earlier than the GMT of its time zone by 1 hour
during the set period.
• Language : Select your language. Sets the language for the
interface.
English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese,
Turkish, Czech, Danish, Swedish, Thai, Romanian, Serbian, Croatian, Hungarian and Greek are available.
x Date
2011 -01-01
YYYY-MM-DD
Use
x Synchronization
08:14:24
24 Hours
x Time
203.248.240.103
x Time Server
GMT+08:00
x Time Zone
Fail
x Last Sync Time
Setup
Not Used
x Time Sync.
Use
x Activate as Server
Dec First (Sun) 0H
Dec First (Sun) 0H
x DST
x Language
OK
Cancel
OK
Cancel
English
M
 You can also use numeric buttons on the remote control or front panel to enter values for Date, Time and other
numeric fields.
Setting Holiday
You can set specific dates to Holidays according to your preferences.
Holidays are applied to <Recording Schedule> and <Alarm Schedule> too.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Date/Time/Language> window to select <Date/Time/Language>, and
press the [ENTER] button.
2. Select <Holiday>.
Date/Time/Language
A calendar for Holiday setup appears.
Holiday
Date/Time/Language
3. Use the left/right <
> buttons to select year or month,
2011
Jan
and press the [ENTER] button.
Sun Mon Tue
Wed Thu
Fri
Sat
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Sat
1
OK
4. Use direction buttons (
◄ ►) to select a desired date,
and press the [ENTER] button.
You will see the “Setting Holiday” screen.
 Ex : Select January 10th and check on <1/10> only to make
every January 10th a holiday. Check both on <1/10> and <Jan
2nd Mon> to make every January 10th and 2nd Monday of
January holidays.
5. When the Holiday setup is done, press <OK>.
Cancel
Date/Time/Language
Holiday
Date/Time/Language
2011
Jan
Setting
Sun Holiday
Mon Tue
1 / 10
4
Wed
Thu
Fri
5
6
7
8
13
14
15
21
22
28
29
2
3
9
10
11
12
16
17
OK
18
19
23
24
25
26
30
31
Jan 2nd Mon
OK
Cancel
20
27
Cancel
Using the Calendar
Using the mouse may help make setup easier.
Select year and month.
Select the left/right <
> key on the left/right side of year/month and press [ENTER] button to
adjust by 1 year/month.
Use direction buttons to select a date and press [ENTER] button.
 A date with recorded data to be searched will appear in yellow in the System Log, Event Log, Time Search and Event
Search.
English _35
 USING THE DVR
6. When the Date/Time/Language setup is done, press <OK>.
using the DVR
Permission Management
You can set permissions of each user over the DVR's specific function and settings.
Setting the Administrator
You can set and change Administrator’s ID and password.
The administrator can use and set all menu items and functions.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Permission Management
Admin
Group
x ID
2. Select <Admin>.
A dialog for Admin ID and Password input appears.
User
Setup
admin
x Password
********
x Confirm P/W
********
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the ID and password.
M
 By default, initial ID and password are set to “admin”, and
OK
Cancel
“4321”.
4. When the administrator setup is done, press <OK>.
Using Virtual Keyboard
For alphanumeric inputs, the virtual keyboard window
appears.
Use direction buttons (
◄ ►) to move to a desired
character, and press the [ENTER] button.
In the upper text input box of the virtual keyboard, there
displays a list of candidate words containing the selected
character.
`
1
2
3
4
5
6
7
8
9
0
-
=
q
w
e
r
t
y
u
i
o
p
[
]
\
a
s
d
f
g
h
j
k
l
;
‘
Caps Lock
z
x
c
v
b
n
m
,
.
/
Space
OK
Del
Shift
Ctrl
Cancel
Select a word from the list, or use the keyboard to enter the
whole word.
 If there are many of candidate words, use < , > buttons to move between them forward and backward.
 You can use mouse wheel and jog shuttle button too.
Select <OK>.
Entered word is applied.
 For upper case letters, use <Caps Lock> button.





For special characters, use <Shift> button.
Using the virtual keyboard is the same to a normal keyboard use in your region.
You can enter only lower-case alphabets and numeric values for the user ID.
For the password, use alphabets and special characters excluding < \ > and <“>.
You can use number buttons on the remote control or front panel.
36_ using the DVR
Setting the Group
You can create user groups and setup permissions for those user groups.
You can register a user for each group in <User>.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Group
Admin
User
x Group
Add
Setup
Delete
Rename
Group Authority
Live View
Setup
Search
Setup
 USING THE DVR
2. Select <Group>.
A window for <Add>, <Delete>, <Rename>, and
<Group Authority> setup appears.
Permission Management
Setup
Backup
Menu
Setup
Record Lock
PTZ
Remote Alarm Out
Shutdown
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
OK
• Add, Delete, Rename : You can add, delete, rename a
group or modify the permissions given to the group.
The virtual keyboard appears when <Add> or <Rename> was selected.
You can add up to 10 groups.
Cancel
- Add : When you first run the DVR with the admin account, only the admin account exists. Add has already
been deactivated. Select to display the virtual keyboard. Enter a group name. You can add up to 10
groups.
- Delete : Deletes a user group that is already registered. Selecting Delete will delete all user accounts
belonging to that group.
- Rename : Renames a group that is already registered. Select <Rename> to display the virtual keyboard.
 For entering a group name, refer to “Using Virtual Keyboard”. (Page 36)
• Group Authority : Sets permissions to access menu items of each group.
Users of a group can access checked functions.
4. When the group setup is done, press <OK>.
To set the group authority
You can set the permissions of the group users to access the menu according to the channel.
1. Select a menu to which the group permission is assigned.
The menu where the group permission is assigned will be
displayed in the Live menu when a group user logs in.
• Live View : You can set the permission to access the Live
screen according to the channel.
• Search : You can set the permission to access the Search
menu according to the channel.
Permission Management
Group
Admin
x Group
Add
Group Authority
Channel
Live View
• Record Lock, PTZ, Remote Alarm Out, Shutdown : Select
an item so that the item will be added to the permissions.
2. Select <OK>.
Select and assign a group user so that the user can
access the specified menu.
Setup
Delete
Rename
Setup
Setup
All
Setup
Search
1
Backup
5
2
Setup
3
4
6
7
8
Menu
9
Setup
10
11
12
Record Lock
13
PTZ
14 Remote Alarm
15 Out
OK
• Backup : You can set the permission to access the Backup
menu according to the channel.
• Menu : You can set menus accessible with a specific
permission.
Group users can access the permitted menus only.
Select a menu to display the Menu Permission screen.
User
ABC
OK
16
Shutdown
Cancel
Cancel
Permission Management
Menu Permission Group
Admin
User
Setup
All
Group
x System
ABC
Device
Record
Add
Event
Delete
Backup
Rename
Network
Group Authority
Date/Time/Language
Setup
Live View
Date/Time/Language
Holiday
Setup
Search
System Management
Setup
Backup
System Information
Settings
Setup
Menu
Log Information
Record Lock
PTZ
Remote Alarm Out
Shutdown
System Log
Event Log
Backup Log
OK
OK
Cancel
Cancel
English _37
using the DVR
To restrict the user permissions
If the admin restricts all permissions of an added group, the users belonging to that group can access only
the default minimum menus and can change the user’s own password only.
1. Start the DVR.
If all permissions are restricted, only the Login dialog should
appear.
2. Log in with a registered user ID.
Login
x ID
abc
x Password
OK
3. Right-click any area on the screen.
If all permissions are restricted, only the accessible context
menus should appear.
Cancel
2011-01-01 01:10:25
Scene Mode
Audio Off
Freeze
Stop Alarm
User Menu
Hide Launcher
Logout
2011-01-01
01:10:25
To change the user password
If you log in with a user account that is restricted to access the menu, you can change your own password
only.
1. Log in with your account.
2. Select <User Menu>.
The Permission Management setup screen appears.
3. Select <Permission Management>.
The Password setup dialog appears.
Permission Management
User
x ID
abc
x Password
********
x Confirm P/W
********
4. Enter a new password.
5. Select <OK>.
You change to the password will be applied.
38_ using the DVR
OK
Cancel
Setting the User
Users can be added only if a group was created in <Group> menu.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
3. Use direction buttons (
◄ ►) to select <Add> from the
window.
A window for “Add User” appears.
You can configure the Network Viewer settings including
name, ID, viewer, Select Group and password.
Result of the user setup appears in the <User> window.
To change the user property, use “Edit User”.
The “Edit User” window appears when you select a
desired item to be changed in the <User> window.
• Viewer : If you select <Use>, you will be given access to the
Web Viewer and Network Viewer.
Admin
User
Group
x Group
Setup
All Group
Group
Add
Name
ID
Viewer
Delete
Previous/Next Page
OK
Cancel
Permission Management
Admin
x Group
Group x Name
 Refer to “Connecting Web Viewer”. (Page 74)
User
Group
Setup
Add
User
All Group
Add
Kim
Name
ID
x ID
ksh
x Viewer
Not Used
x Select Group
ABC
x Password
Viewer
Delete
********
x Confirm P/W
********
OK
 For more information about use of Network Viewer, refer to the
Cancel
Previous/Next Page
Network Viewer's user guide. (Page 5)
OK
Cancel
4. When the user setup is done, press <OK>.
Setting Permissions
You can set restricted access for all general users.
Items with restrictions will require logging in for use.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
2. Select <Setup>.
The Restricted Access, Restriction on Network Access,
Auto Log out, Manual Input of ID setup screen appear.
Permission Management
Admin
• Restricted Access : All menu items allowed for a user can
be set with restricted access.
- Checked (
User
Setup
Live View
Backup
Record Lock
Search
PTZ
Remote Alarm Out
Shutdown
All
Restriction on Network Access
All Network
x Auto Log out
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
Group
Restricted Access
x Manual Input of ID
Web Viewer
3 min
ON
OK
Cancel
) : Restricted
- Not checked (
) : Accessible
 If it is not checked (
) in <Restricted Access>, any user can access the item no matter what the <Group Authority>
setting.
 If it is checked (
) in <Restricted Access>, a user can access the item only if the user has permission in <Group
Authority> setting.
• Restriction on Network Access : Restricts remote access from a <Restricted Access> network.
- All Network : Restricts all access instances via Network Viewer and Web Viewer.
- Web Viewer : Restricts access via the Web Viewer.
• Auto Log out : A user will be automatically logged out if there is no operation on DVR for over set period of
time.
English _39
 USING THE DVR
2. Select <User>.
A window for Add User appears.
Permission Management
using the DVR
• Manual Input of ID : Prompts you to enter the user ID
manually for the login process.
- Checked ( ) : Encloses the registered user IDs with the
[½] symbols.
Use the virtual keyboard to enter the user ID.
Login
x ID
*****
x Password
4. When the permission setup is done, press <OK>.
OK
Cancel
System Management
You can check the system version, update to a newer version, as well as data backup and initialization.
Checking the System Information
You can check the current system version, broadcasting system, MAC address. You can update the system.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <System Management>, and press [ENTER]
button.
System Management
System Information
x Software Version
2. Check the Version, Broadcast Format, and MAC Address.
• System Information : Shows the current system’s
information.
The values can not be changed by a user.
• S/W Upgrade : Updates the DVR’s software up to date.
40_ using the DVR
Settings
System Information
V1.00h_100315180929
x Broadcast Format
NTSC
x MAC Address
00:00:F0:54:FF:FF
S/W Upgrade
x Device
USB2FlashStorage
x Version
V1.00h_100315180929
Previous
Upgrade
• Updating the Software
1. Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
 Upgradeable devices include USB memory, CD/DVD and
network device.
 To update the network, the current DVR should have been
Settings
System Information
x Software Version
System
Format
x Broadcast
V1.00h_100315180929
Upgrade
NTSC
x MAC Address
Current Version 00:00:F0:54:FF:FF
V1.00h_100315180929
New Version
V1.00h_100320180929
S/W Upgrade
Do you want to upgrade?
Upgrade
USB2FlashStorage
x Device
OK
Cancel
V1.08_090731170402
x Version
Previous
2. Select <System Management> from <System> window.
3. Select <System Information>.
4. When the recognized device appears, select <Upgrade>.
 The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is
same to or older than that of <S/W Upgrade>.
5. Press <OK> in the “System Upgrade” window.
 While updating, it shows the progress.
• Updating progresses with 3 steps as shown in the figure.
System Management
System Information
Settings
System Information
x Software Version
V1.00h_100315180929
Format
x BroadcastS/W
NTSC
Upgrade
x MAC Address
00:00:F0:54:FF:FF
Software upgrading...
S/W Upgrade
x Device
USB2FlashStorage
x Version
V1.08_090731170402
Upgrade
Previous
System Management
System Information
Settings
System Information
x Software Version
V1.00h_100315180929
FormatUpgrade
x BroadcastS/W
NTSC
x MAC Address
00:00:F0:54:FF:FF
Software upgrading...
Software upgrading...
S/W Upgrade
x Device
x Version
Do not turn off during the upgrade.
Upgrade
USB2FlashStorage
V1.08_090731170402
Previous
6. When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
M
 If “Upgrade Failed” appears, retry from the step 4.
When you experience continued failure, consult the service
center for assistance.
English _41
 USING THE DVR
connected to the network.
Upgrade via the proxy server may not be enabled due to the
restricted access.
System Management
System Information
using the DVR
Settings
You can copy and import the DVR settings by using a storage media.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <System Management>, and press [ENTER]
button.
System Management
Settings
System Information
x Storage Device
2. Select <Settings>.
A window of storage device and load factory default
appears.
0 MB (Remained Capacity)
x DVR USB
38010100
Export
x USB DVR
No data
Import
Include Network Settings
x Load Factory Default
Default
3. Use direction buttons (
◄ ►) to move to a desired
item, and export or import settings data to a storage
device.
Previous
• Storage Device : Shows the connected storage device.
• Export : Exports DVR settings to the connected storage device.
• Import : Imports DVR settings from the storage device and applies to the DVR.
 If <Include Network Settings> is checked, the network settings will be imported too.
• Load Factory Default : If <Default> is selected, a
confirmation dialog for “Load Factory Default” prompts.
Press <OK> to initialize the system to the factory default.
System Management
Settings
System Information
x Storage Device
4. To move to the previous menu, press <Previous>.
Load
x DVR USB
x USB DVR
0 MB (Remained Capacity)
Factory
Default
38010100
Export
Import
No date
Sure to Default
Setting?
Include
Network Settings
x Load Factory Default
OK
Default
Cancel
Previous
Log Information
You can browse logs on the system and events.
System Log
System Log shows log and timestamp on every system start up, system shutdown, and changes on system
settings.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Log Information>, and press [ENTER] button.
2. Select <System Log>.
Search Day
 Refer to “Using the Calendar”. (Page 35)
Click on the calendar <
Log Information
System Log
First Page
No.
Event Log
2011-01-01
Backup Log
Search
Last Page
Type
Log List
> to display the calendar window.
• Type : When there are too many logs, you can display logs of
the desired format by selecting the type.
3. Use direction buttons (
◄ ►) to move to a desired item,
and press <Search>.
42_ using the DVR
View all
Date/Time
Previous/Next Page
Previous
Event Log
Event log shows recorded events on alarms, motion detections and video loss.
It also shows the log and its timestamp.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <System> window to
move to <Log Information>, and press [ENTER] button.
2. Select <Event Log>.
Log Information
System Log
Search Day
First Page
4. Set Search Day, Channel and Type and the press
<Search>.
Last Page
CH
All CHs
Type
View all
No.
Log List
Date/Time
7
Motion Detection [CH 7]
2011-01-01 00:02:18
6
Motion Detection [CH 6]
2011-01-01 00:02:18
5
Motion Detection [CH 5]
2011-01-01 00:02:18
4
Motion Detection [CH 4]
2011-01-01 00:02:18
3
Motion Detection [CH 3]
2011-01-01 00:02:18
2
Motion Detection [CH 2]
2011-01-01 00:02:18
1
Motion Detection [CH 1]
2011-01-01 00:02:18
Previous/Next Page
 Refer to “Using the Calendar”. (Page 35)
Click on the calendar <
Backup Log
Search
2011-01-01
Previous
> to display the calendar window.
Backup Log
You can find out who backed up and the details (backup time, channel, device to use, file format, etc.).
Using the mouse may help make setup easier.
1. In the <System> window, press the up/down (
)
button to move to <Log Information> and press the
[ENTER] button.
Log Information
System Log
Search Day
First Page
2. Select <Backup Log>.
No.
Backup Log
Event Log
2011-01-01
~
Last Page
Search
2011-01-02
Previous/Next Page
User
Date/Time
3. Use the four direction buttons (
◄ ►) to move to a
desired item.
4. Specify a search term and select <Search> in the right
corner.
Backup details for the search term will be listed.
Previous
English _43
 USING THE DVR
3. Use direction buttons (
◄ ►) to move to the desired
item.
Event Log
using the DVR
SETTING THE DEVICE
You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
Logout
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
Exit
Device
3. Use the up/down buttons (
) to move to <Camera>,
and press [ENTER] button.
Camera
Storage Device
Remote Device
POS Device
Monitor
4. Select <Camera>.
You will see a window where you can configure the
camera settings including Video, Audio, Channel Name,
Dwell Time and Progressive.
5. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Video
Camera
Camera
CH
PTZ
Video
Audio
1
ON
OFF
CAM 01
5 sec
OFF
2
ON
OFF
CH Name
CAM 02
SEQ-Dwell Time
5 sec
Progressive
OFF
3
ON
OFF
CAM 03
5 sec
OFF
4
ON
OFF
CAM 04
5 sec
OFF
5
ON
OFF
CAM 05
5 sec
OFF
6
ON
OFF
CAM 06
5 sec
OFF
7
ON
OFF
CAM 07
5 sec
OFF
8
ON
OFF
CAM 08
5 sec
OFF
Previous/Next Page
Screen Setup
- <ON/OFF> : You can turn ON/OFF the selected
channel’s camera.
OK
Cancel
- <Covert1> : Shows information other than the video of the selected channel.
 For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
• Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.
 Audio output is available for only 1 channel.
 You can set audio inputs only between 1ch and 4ch.
• CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)
 Refer to “Using Virtual Keyboard”. (Page 36)
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.
 If set to <OFF>, the channel is not listed in the Auto Sequence mode.
44_ using the DVR
• Progressive : You can set the progressive camera to ON/OFF.
J
 If you set it to <ON> for the progressive camera, screen flickering will be reduced.
• Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the < (Brightness)>,
< (Contrast)>, and < (Color)> of the selected channel.
6. When the camera setup is done, press <OK>.
Screen Setup
CH1
50
50
Init
50
OK
Apply to All CH
Cancel
Setting the PTZ
To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the “Remote Devices” settings. (Page 48)
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Camera>, and press [ENTER] button.
2. Select <PTZ>.
A window of PTZ settings appears.
3. Use direction buttons (
◄ ►) to move to a desired
item, and select it.
• ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control or front panel.
Camera
Camera
PTZ
CH
ID
1
0
>
None
2
1
>
Protocol
None
3
2
>
None
4
3
>
None
5
4
>
None
6
5
>
None
7
6
>
8
7
>
None
None
Previous/Next Page
OK
Cancel
• Protocol : Set the protocol of the connected camera of each
channel.
M
 You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR.
(Page 67)
4. When the PTZ setup is done, press <OK>.
English _45
 USING THE DVR
• Press the <Init> to initialize settings back to the default 50.
using the DVR
Storage Device
You can check information on storage devices.
Confirming Devices
You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <Device>.
• No. : Shows the assigned number of the internal HDD.
 To see the detailed positioning of the HDD according to the
number, refer to <HDD Map>.
Storage Device
Device
Format
HDD Alarm
Device
No.
Used/Total
Usage
Status/Management
HDD
CD/DVD
1
–
12.28G/499.37G
0/0
Internal
Backup
Normal
Normal
• Used/Total : Shows the used/total capacity of the storage
device.
• Usage : Sets the storage device’s usage.
- USB memory is used only for backups.
 External USB HDD, SATA HDD are used for extension and backup.
 A maximum of 2TB for each port is supported for backup on a high capacity SATA HDD such as RAID equipment
(ex: SVS-5R), and a maximum of 4TB for extension purposes.
 SVS-5R supports only RAID1 and RAID5.
• Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.
- Normal : Available to use
- Check : Available to use but recommended to replace
- Replace : Requires immediate replacement.
HDD Map
OK
• HDD Map : Shows the internal HDD’s locations according to
assigned numbers.
 Refer to this for servicing or additional HDD installation.
Cancel
HDD Map
3. To move to the previous menu, press <OK>.
OK
<SRD-852D/1652D>
46_ using the DVR
Formatting
You can format a storage device.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <Format>.
A window for selection of device for formatting appears.
Storage Device
Format
Device
Device
HDD Alarm
Select
HDD
CD / DVD
1
–
Used/Total
Usage
12.28G/499.37G
0/0
Internal
Backup
 USING THE DVR
3. Use direction buttons (
◄ ►) to select a device to be
formatted.
Format
OK
4. Select <Format> on the bottom of the screen.
Press <OK> on the “Manage” confirmation window will
start formatting the selected device.
Storage Device
Format
Device
Device
5. When the formatting is done, press <OK>.
Cancel
HDD Alarm
Select
HDD
CD / DVD
1
Manage–
Used/Total
Usage
12.28G/499.37G
0/0
Internal
Backup
Formatting deletes all recordings.
Proceed formatting?
OK
Cancel
Format
OK
Cancel
HDD Alarm
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <HDD Alarm>.
A window for setting HDD check and replace output ports
and their durations appears.
Storage Device
Device
x Duration
x Replace Alarm Output Port
3. Use direction buttons (
◄ ►) to move to the desired
item.
• Alarm
x Duration
HDD Alarm
Format
x Check Alarm Output Port
1
2
3
4
BEEP
All
1
2
3
4
BEEP
All
OFF
OFF
OK
Cancel
- Alarm signal will output through the alarm out port on the
rear side when selected <1>, <2>, <3>, and <4>.
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
English _47
using the DVR
• Duration : Sets the alarm duration for the alarm signal and beep sound.
- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
M
 <Check> status means that the HDD is operating but it has problems that require technical examination.
(
) appears on the Live screen.
 <Replace> status means that the HDD has defect and requires immediate replacement.
(
) appears on the Live screen.
4. When the HDD Alarm setup is done, press <OK>.
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
2. Use direction buttons (
◄ ►) to move to the desired
item, and press [ENTER] button.
3. Set the values of each communication setup of the remote
device.
Remote Device
Baudrate
Parity
Data
Stop Bit
Transfer type
9600
None
8
1
Half Duplex
System Keyboard
OFF
ID
00
Remote Control
ON
ID
00
• Baudrate : Baud rate settings of the DVR, PTZ camera and
system keyboard should be matched for proper operations.
OK
Cancel
4. Make sure to match IDs of the DVR, System Keyboard
and Remote Control, and press <OK>.
M
 For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)
POS Devices
You can set properties of POS devices connected to the DVR.
A POS device connection requires channel, preset, and Port/Ethernet settings.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <POS Device>, and press [ENTER] button.
POS Device
POS USE
POS Device Setup
2. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• POS USE : When selected <POS USE>, DVR and POS will
be connected.
POS
CH
1
None
No preset
Preset
Port/Ethernet
None
2
None
No preset
None
3
None
No preset
None
4
None
No preset
None
5
None
No preset
None
6
None
No preset
None
7
None
No preset
8
None
No preset
None
None
Previous/Next Page
J
 If you change settings for the device and press <OK> while
the <POS USE> is not checked, the changes for POS device
will not be saved.
48_ using the DVR
OK
Cancel
• POS Device Setup : Sets the communication setups for the
POS device and DVR.
 It is independent to the Remote Device setup.
POS Device
POS USE
POS Device Setup
POS
CH
1
None
Preset
No preset
2
NoneSetup
POS
Device
3
4
Baudrate
5
9600
None
None
7
None
8
None
No preset
Data
No preset
8
No preset
None
None
None
No preset
Parity
None
6
Port/Ethernet
None
None
Transfer type
None
Half Duplex
None
Stop bit
1
No preset Cancel
OK
No preset
None
None
No preset
None
Previous/Next Page
OK
 If selected a channel input field, “Sync Channel Setup” window
appears.
 One POS device can be synchronized to up to 16 cameras
(channels), however one channel cannot be synchronized to
multiple POS devices.
POS Device
POS USE
POS Device Setup
POS
CH
1
None
Preset
2
None Setup
Sync
Channel
3
4
None
CH
None
5
None
6
None
7
None
8
None
Port/Ethernet
No preset
1
2
9
10
No preset
3
4
No preset
11
12
No preset
No preset Cancel
OK
No preset
No preset
OK
“Event” in “Main Menu > Record > Recording Schedule”.
(Page 52)
 Preset name should be unique.
 Use <Add> button to display “Add Preset” window, and set its
name, start string, and end string.
• Port/Ethernet : Sets the port number for the DVR and POS
device connection.
 COM1 : For RS-232C connections
None
5
6
13
14
None
7
None
15
None
8
16
None
None
None
Previous/Next Page
 Channels to be synchronized to a POS device should be set to
• Preset : Sets the name, start and end strings of the receipt
for the preset.
None
No preset
Cancel
POS Device
POS USE
Preset
Setup
POS
1
No.
2
3
POS Device Setup
CH
Add Preset
None
Name
None
x Name
None
Start
Port/Ethernet Add
Preset
No preset
End
No preset
None
Input char. Set
None
No preset
None
4
None
x Start Keyword
No preset
None
5
None
x End Keyword
None
No preset
None
6
No preset
None
7
None
8
None
OKNo preset Cancel
No preset
OK
Cancel
OK
Cancel
Del
None
None
Previous/Next Page
 7001~7016 : For Ethernet connections
3. When the POS Device setup is done, press <OK>.
English _49
 USING THE DVR
• CH : Select the camera to be synchronized to the POS
device.
Cancel
using the DVR
Monitor
You can configure information to be displayed and its format for Spot Out monitor.
Setting the Monitor
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Monitor>.
Monitor
Monitor
Spot Out
x Event Display
Mode
OFF
x Display
Date
Time
CH Name
Icon
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Event Display : Sets the dwell time of the event channel
display on the monitor when an event occurs.
If selected <Continuous>, it displays the channel until you
press [ALARM] button to release it.
• Display : Displays only checked items on the monitor
screen.
• Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of
the Live screen.
• Sharpness : You can adjust the sharpness of the video output signal.
x Multi CH SEQ Time
5 sec
x VGA
800x600
x Sharpness
Level1 (Low)
Display Position Setup
OK
Cancel
4. When the monitor setup is done, press <OK>.
Screen Setup
Some monitors many not display information (camera name, icon, time information, etc.) about the DVR,
depending on the condition. Then, you can change the display position of the data.
1. In the <Device> window, press the up/down (
) button to move to <Monitor> and press the [ENTER]
button.
2. Select the <Monitor> item.
3. Select <Display Position Setup> in the bottom.
You will move to the <Display Position Setup> window.
4. Use the four direction buttons or the number buttons on
the front panel or the remote control to adjust the data
position.
2011-01-01 01:10:25
Display Position Setup
30
30
30
30
OK
50_ using the DVR
Cancel
Setting the Spot Out
You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Spot Out>.
Monitor
Spot Out
Monitor
x Spot Out 1
Mode
CH 1
Set Mode
Single
Set Mode
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
Set Mode
Set Mode
• Spot Out 1 : Specify a single channel for output.
You can set the dwell time between the screen switching in
“Setting the Device > Camera > SEQ-Dwell Time”.
(Page 44)
Cancel
Monitor
Spot Out
Monitor
x Spot Out 1
Mode
CH 1
Set Mode
Single
Set Spot Out
Set Mode
1
M
 USING THE DVR
OK
 You can setup using the mouse right button in Live screen.
Refer to “Spot Out”. (Page 31)
Set Mode
3
Set Mode
7
2
5
6
9
10
13
14
4
8
11
12
15
16
OK
4. When the Spot Out is done, press <OK>.
OK
Cancel
Setting the Screen Mode
You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Mode>.
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Live Screen : Select split modes for the Live screen.
16-, 9-, and 4-split screens are included by default.
• Play Screen : Select split modes for the playback screen.
Only the 13-split screen is optional.
Black shows the playback while white shows the Live
screen.
Monitor
Monitor
Mode
Spot Out
Live Screen
Play Screen
Live
OK
Play
Cancel
4. When the screen mode setup is done, press <OK>.
English _51
using the DVR
SETTING THE RECORDING
You can setup scheduled recording, event recording and other recording related settings.
Recording Schedule
Make your reservation on a date and time to schedule the recording on specified time.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
Logout
2. Use the left/right button (◄ ►) to select <Record>.
Record menu is selected.
Exit
Record
3. Use the up/down buttons (
) to move to <Recording
Schedule>, and press [ENTER] button.
Recording Schedule
Event Record Duration
REC Quality & Resolution
Record Option
4. Select <Recording Schedule>.
A window of scheduled recording setup appears.
Recording Schedule
CH1
5. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
All
0 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
No Recording
Continuous
Event
OK
• Apply to All CH : If selected <Apply to All CH>, “Apply to
All CH” window appears.
Press <OK> to apply the setup to all channels.
Both(Cont&Evnt)
Apply to All CH
Cancel
Recording Schedule
CH1
All
0 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
6. When the recording schedule setup is done, press <OK>.
Mon
Apply to All CH
Tue
Wed
Thu
M
 Event recording and scheduled recording starts about 3
seconds prior to the event/schedule for guaranteed recording.
Apply recording schedule to all channels?
Fri
OK
Sat
No Recording
Continuous
Event
OK
52_ using the DVR
Cancel
Hol
Both(Cont&Evnt)
Cancel
Apply to All CH
Recording Color Tags
Color
Function
White
No Recording
Orange
Continuous
Blue
Event
Green
Both(Cont&Evnt)
Description
No schedule / event recording
Scheduled recording only
Event recording only
Both scheduled / event recordings
 USING THE DVR
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event><Both(Cont&Evnt)>.
Event Record Duration
You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
Event Record Duration
CH
Pre Event
POST Event
1
OFF
1 min
2
OFF
1 min
3
OFF
1 min
4
OFF
1 min
5
OFF
1 min
6
OFF
1 min
7
OFF
1 min
8
OFF
2. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
• POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
1 min
Previous/Next Page
OK
Cancel
3. When the event recording duration setup is done, press <OK>.
REC Quality / Resolution
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.
Setting Standard Recording Properties
You can set each channel’s resolution, quality and IPS for normal recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
2. Select <Standard>.
3. When the recording setup is done, press <OK>.
• Remaining count : If you change the settings of the
resolution and the remaining rate, the frame rate available
for each resolution will be recalculated.
REC Quality & Resolution
Standard
Event
Remaining count : 4CIF(L) : 0
2CIF(M) : 0
CIF(S) : 0
CH
Resolution
Record Rate
1
CIF(S)
7.5ips
2
CIF(S)
7.5ips
Level4
3
CIF(S)
7.5ips
Level4
4
CIF(S)
7.5ips
Record Quality
Level4
Level4
5
CIF(S)
7.5ips
Level4
6
CIF(S)
7.5ips
Level4
7
CIF(S)
7.5ips
8
CIF(S)
7.5ips
Level4
Level4
Previous/Next Page
OK
Cancel
English _53
using the DVR
Setting Event Recording Properties
You can set each channel’s resolution, quality and IPS for event recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
REC Quality & Resolution
Event
Standard
Remaining count : 4CIF(L) : 0
CH
2. Select <Event>.
Event recording setup window appears.
CIF(S) : 0
Record Rate
Record Quality
1
CIF(S)
7.5ips
2
CIF(S)
7.5ips
Level4
3
CIF(S)
7.5ips
Level4
4
3. Use direction buttons (
◄ ►) to move to a desired
item, and select it.
2CIF(M) : 0
Resolution
CIF(S)
Level4
7.5ips
Level4
5
CIF(S)
7.5ips
Level4
6
CIF(S)
7.5ips
Level4
7
CIF(S)
7.5ips
8
CIF(S)
7.5ips
Level4
Level4
Previous/Next Page
• Resolution : Sets the resolution of the recorded screen.
 If you set the resolution to <4CIF(L)>, up to 4 channels are
OK
Cancel
supported.
• Record Rate : Image Per Second, means the frames recorded per a second.
• Record Quality : Sets the recording quality.
M
 The remaining rate for each channel displayed in DVR is a sum of frame rates in both standard recording and event
recording.
 You cannot increase the remaining count if the current remaining count has reached zero or there is no available
remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so
for the same channel on any other page.
 Only if the resolution is set to 4CIF, you can select Level 9 for the recording quality.
4. When the Event recording setup is done, press <OK>.
Record Option
You can set the recording to stop or overwrite when the HDD is full.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Record> window to
move to <Record Option>, and press [ENTER] button.
Record Option
x Disk End Mode
2. Use direction buttons (
◄ ►) to move to a desired
Auto Delete
item, and set the value.
• Disk End Mode : If selected <Overwrite>, recording will
continue despite the HDD full while overwriting the oldest.
If selected <Stop>, the recording will stop when the HDD is
full.
• Disk End Beep : If selected <Stop>, the button is activated.
If you check it, the beep will sound on the disk full and the
recording stops.
• Auto Delete : If you check it, Record Period setup is activated.
If you specify the auto deletion period, the recording data before the period will be deleted automatically.
(This option will be enabled only if Disk End Mode is set to “Overwrite”.)
Overwrite
Disk End Beep
x
Auto Delete
180
day
The recording information will be deleted.
Do you want to proceed?
OK
OK
3. When the recording option setup is done, press <OK>.
54_ using the DVR
Cancel
Cancel
SETTING THE EVENT
You can set recording options for sensor, motion, and video loss event.
Sensor Detection
You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.
Using the mouse may help make setup easier.
Logout
2. Use the left/right button (◄ ►) to select <Event>.
Event setting menu is selected.
Exit
Event
Sensor Detection
Motion Detection
Video Loss Detection
Alarm Schedule
3. Use the up/down buttons (
) to move to <Sensor
Detection>, and press [ENTER] button.
A window of sensor detection setup appears.
4. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Sensor Operation : Sets the operation mode of sensors.
- <OFF> : Sensor does not operate.
- <N.O (Normal Open)> : Sensor is opened.
If the sensor is closed, it generates alarm.
- <N.C (Normal Close)> : Sensor is closed.
If the sensor is open by interruption, it generates alarm.
• Cam : Select a channel to be connected to the sensor.
If selected camera, “Cam Preset setup” window appears.
Select a channel and setup the preset.
 Preset setup can be done in PTZ mode.
Refer to “Preset Setting”. (page 67)
Sensor Detection
Sensor
Sensor Operation
Cam
1
OFF
1
None
10 sec
2
OFF
2
None
10 sec
3
OFF
3
None
10 sec
4
OFF
4
None
10 sec
5
OFF
5
None
10 sec
6
OFF
6
None
10 sec
7
OFF
7
None
8
OFF
8
None
OK
1
2
3
4
5
8
Cam
Preset setup
Sensor Operation
OFF
CH
1
10 sec
Cancel
2
3
4
5
6
7
Cam
4
None
OFF
5
None
OFF
6
None
OFF
7
None
OFF
8
None
None
None
9
None
10
None
11
None
12
None
13
None
14
None
15
3
None
OFF
CH
2
None
OFF
Alarm
1
Preset
OFF
8
5. When the sensor detection setup is done, press <OK>.
10 sec
Sensor Detection
Sensor
7
• Duration : Sets the duration of alarm signal and alarm
sound.
Duration
Previous/Next Page
6
• Alarm : Sets the alarm output method.
 For further information on alarm output, refer to “HDD Alarm >
Alarm”. (Page 47)
Alarm
None
16
OK
Cancel
OK
Cancel
Duration
10 sec
Preset
10 sec
None
10 sec
None
10 sec
None
10 sec
None
10 sec
None
10 sec
None
10 sec
None
Previous/Next
Page
None
Sensor Detection
Sensor
Sensor Operation
Cam
1
OFF
1
None
10 sec
2
OFF
2
None
10 sec
3
None
4
None
3
Alarm
OFF Setup
Alarm
4
OFF
5
OFF
1
5
2
6
OFF
4
6
BEEP None
7
OFF
7
8
OFF
None
Cancel
None
OK
8
None
Duration
10 sec
10 sec
3
10 sec
All
10 sec
10 sec
10 sec
Previous/Next Page
OK
Cancel
English _55
 USING THE DVR
1. Press the [MENU] button on the remote control or front
panel.
using the DVR
Motion Detection
You can set target detection region and motion, as well as the alarm signal output.
When the motion detection region is set, it detects motion within the area.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Event> window to
move to <Motion Detection>, and press [ENTER] button.
A window of motion detection area setup appears.
Motion Detection
CH
Mode
Sensitivity
1
OFF
Level10(High)
None
10 sec
2
OFF
Level10(High)
None
10 sec
3
OFF
Level10(High)
None
10 sec
4
OFF
Level10(High)
None
10 sec
5
OFF
Level10(High)
None
10 sec
6
OFF
Level10(High)
None
10 sec
7
OFF
Level10(High)
None
8
OFF
Level10(High)
None
2. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Mode : Sets whether to activate motion detection.
• Sensitivity : Sets the sensitivity level of the motion detection.
• Alarm : Sets the alarm output method.
Alarm
Alarm Duration
10 sec
10 sec
Previous/Next Page
Motion Region
 For further information on alarm output, refer to “HDD Alarm >
OK
Cancel
Alarm”. (Page 47)
• Alarm Duration : Sets the duration of alarm signal and alarm sound.
3. When the motion detection setup is done, press <OK>.
Setting the Motion Detection Area
Select <Motion Region>.
When “Motion Region” window appears, select a
channel for detection and set the area of motion
detection.
• To set the area in “Motion Region” window
In the “Motion Region” window, select desired region
from <
>.
Motion Region
1 CH
• To set the area using <Individual> selection
Individual
OK
Apply to All CH
Cancel
In the “Motion Region” window, you can select cells
individually by using <Individual>.
When selected <Individual>, “Motion Region” window disappears and you can select cells one by one.
When the motion area setup is done, press the <Menu> on the screen or the [MENU] button on the
remote control or front panel to display the “Motion Region” window again.
Select
- Select : Selected cell is set to be a part of motion detection area.
Unselect
- Unselect : Selected cell is removed from the motion detection area.
Inverse
- Inverse : Unselected cells are set to be the motion detection area.
Menu
- Menu : After selecting individual motion areas, move to the “Motion Region” window.
 If selected <Apply to All CH>, selected motion area is applied to all channels.
When the motion detection setup is done, press <OK>.
56_ using the DVR
Video Loss Detection
You can set the alarm to be generated on a camera disconnection, which causes a video loss.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Event> window to
move to <Video Loss Detection>, and press [ENTER]
button.
A window of video loss detection area setup appears.
Video Loss Detection
Video Loss State
1
OFF
None
10 sec
2
OFF
None
10 sec
3
OFF
None
10 sec
4
OFF
None
10 sec
5
OFF
None
10 sec
6
OFF
None
10 sec
7
OFF
None
8
OFF
None
2. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Video Loss State : Sets whether to activate video loss
detection.
• Alarm : Sets the alarm output method.
Alarm
Alarm Duration
10 sec
10 sec
Previous/Next Page
OK
Cancel
 For further information on alarm output, refer to “HDD Alarm >
Alarm”. (Page 47)
• Alarm Duration : Sets the duration of alarm signal and alarm sound.
3. When the video loss detection setup is done, press <OK>.
Alarm Schedule
You can set the conditions and operating hours for scheduled alarms.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Event> window to
move to <Alarm Schedule>, and press [ENTER] button.
Alarm Schedule
Alarm1
2. A window of <Alarm Schedule> settings appears.
• Alarm : Sets the alarm output method.
 For further information on alarm output, refer to “HDD Alarm >
Alarm”. (Page 47)
All
0 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
• <ON> : Marked in orange, and always generates alarm on
scheduled time.
• <OFF> : Marked in white, no alarm is generated even if an
event occurs.
• Event Sync : Marked in Blue, generates alarm only when an
event occurs.
• Apply to All Alarm : Applies the configured schedule to all
alarms.
OFF
ON
Apply to All Alarm
Event Sync
OK
Cancel
Alarm Schedule
Alarm1
M
 When the alarm is generated on the scheduled time, you can
stop the alarm by canceling the schedule.
All
Sun
Mon
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Apply to All Alarm
Tue
Wed
Thu
3. When the Alarm Schedule setup is done, press <OK>.
0 1 2 3 4
Apply the alarm scheduling to all?
Fri
OK
Sat
Cancel
Hol
OFF
ON
Apply to All Alarm
Event Sync
OK
Cancel
English _57
 USING THE DVR
CH
using the DVR
BACKUP
You can check the backup device and set the backup schedule by channel or by time.
The product only supports external HDD of USB memory/DVD and USB/SATA type. (Page 98)
Setting the Backup
You can backup the desired data to a connected device.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
Logout
2. Use the left/right button (◄ ►) to select <Backup>.
Backup menu is selected.
Exit
Backup
Backup
3. Press the [ENTER] button.
A backup window appears.
You can directly access it from the “Live screen menu”.
(Page 26)
Backup
x Start
2011-01-01 00:01:06
x Overlap
ALL
x End
2011-01-01 08:25:45
~
List0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Backup Range : Sets the <Start> and <End> time for the
backup.
• Channel : Sets the channel to backup.
You can select multiple channels.
• Device : Select a backup device from the recognized devices.
If the built-in internal CD/DVD or external USB CD/DVD is used for the backup, you can select the format of
recording between AVI and SEC.
• Type : Sets the backup data format.
- AVI : Saves the CODEC information provided by the DVR with the recording data, and saved data can be
played back by using external viewers (such as Windows Media Player) on a PC.
- DVR : Saved data can be played back only by the DVR.
- SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate
playback on a PC.
x Device
USB-Storage
x Type
AVI
x Folder
\20110101\
x Filename
0001
Change
Backup
Used
Free
Check capacity
OK
Cancel
• Filename : You can set the back file name.
 Refer to “Using Virtual Keyboard”. (Page 36)
• Check capacity : Shows the size of the selected backup data, used and available capacity of the selected
backup device.
• Overlap : Shows a list of overlapping data on a same time according to the number of data.
It appears when one channel has multiple data on a certain time point due to changing of time or time zone
settings, etc.
 Refer to time and time zone of “Setting the Date/Time/Language”. (Page 34)
58_ using the DVR
5. When the backup setup is done, press <OK>.
 If no available device is recognized for backup, <OK> button is not activated.
J
 The application may slow down during the backup.
 You can switch to the menu screen during the backup in operation, but playback of data is not available.
 When a CD/DVD or memory device is used for backup, it is not available to use the full capacity of the media since
the system consumes a part of its capacity.
will fail. In this case, replace the CD/DVD media and try again.
 If backup has failed, select “Device > Storage Device” and check the free space of the HDD and check also if the
HDD is properly connected.
M
 Pressing the <Exit> during the backup will return to the previous menu, while the backup progresses.
NETWORK CONFIGURATION
It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
Connection Mode
You can set the network connection route and protocol.
Setting the Connection
Sets the protocol and environment of the network.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
Logout
2. Use the left/right button (◄ ►) to select <Network>.
Network menu is selected.
Exit
Network
3. Use the up/down buttons (
) to move to <Connection
Mode>, and press [ENTER] button.
Connection Mode
DDNS
Live Transfer
Mailing Service
4. Select <Connection>.
A window of connection mode setup appears.
5. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
• Connection Mode : Sets the network connection mode.
• Bandwidth : Sets the maximum data flow to be transferred.
(Upload speed)
Options will vary depending on the selected connection
mode.
- For <Static IP>, <Dynamic IP> : Select one from 50
kbps ~ 2Mbps, and Unlimited.
- For <ADSL>, select one from 50 kbps ~ 600 kbps.
Connection Mode
Connection
Protocol
x Connection Mode
Static IP
x Bandwidth
2Mbps
x IP
192.168. 1.200
x Gateway
192.168. 1.
x Subnet Mask
255.255.255. 0
x DNS
Manual
1
168.126. 63. 1
OK
Cancel
English _59
 USING THE DVR
 If a CD or DVD media causes errors, the disc tray opens and closes a several times, and eventually backup process
using the DVR
• IP, Gateway, Subnet Mask, and DNS
- For <Static IP> : You can directly input IP address,
Gateway, Subnet Mask and DNS.
- For <Dynamic IP> : IP address, Gateway, and Subnet
Mask are set automatically.
- For <ADSL> : IP address, Gateway, and Subnet Mask
are set automatically.
• User ID, Password : In case you selected ADSL, provide the
“User ID” and its “Password”.
M
Connection Mode
Connection
Protocol
x Connection Mode
ADSL
x Bandwidth
600kbps
x IP
192.168. 1.200
x Gateway
192.168. 1.
x Subnet Mask
255.255.255. 0
x DNS
Manual
x User ID
ID
x Password
********
1
168.126. 63. 1
OK
Cancel
 DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.
6. When the connection setup is done, press <OK>.
Setting the Protocol
1. Use the up/down buttons (
) in <Network> window to
move to <Connection Mode>, and press [ENTER]
button.
Connection Mode
Connection
x Protocol Type
2. Select <Protocol>.
3. Use direction buttons (
◄ ►) to move to a desired
item, and set the value.
Protocol
TCP
x Port(TCP)
554
x Port(UDP)
8000 ~ 8160
x Unicast/Multicast
Unicast
x Multicast IP
224.126. 63. 1
x TTL
x Webviewer Port
• Protocol Type : Select the protocol type between TCP and
UDP.
~
558
5
80
OK
Cancel
 If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/
Multicast are activated.
• Port (TCP) : Initially, <554~558> is set. It increases / decreases by 5.
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
• Port (UDP) : Initially, <8000~8160> is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area
network (LAN) environments.
• Unicast/Multicast : Select one between Unicast and Multicast.
If selected Multicast, Multicast IP and TTL are activated.
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the
network.
• Multicast IP : User can directly input.
• TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.
• Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.
4. When the protocol setup is done, press <OK>.
60_ using the DVR
DDNS
You can set the DDNS site for a remote user’s network connection.
Using the mouse may help make setup easier.
1. Use the up/down buttons (
) in <Network> window to
move to <DDNS>, and press [ENTER] button.
2. Use virtual keyboard to enter user inputs.
 Refer to “Using Virtual Keyboard”. (Page 36)
DDNS
x DDNS Site
OFF
x Host Name
x User Name
x User Password
********
 USING THE DVR
 If selected <OFF> or <Samsung DDNS>, input fields are
deactivated.
 If you select <Samsung DDNS>, the “DDNS host address”
item will be displayed.
OK
Cancel
3. When the DDNS setup is done, press <OK>.
M
 Refer to <DDNS Setting>. (Page 63)
Connecting and Setting the Network
Networking may differ from the connection method, check your environment before setting the connection mode.
When no router is used
• Static IP mode
- Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
DVR and remote user.
- DVR Network Settings : Set the <Connection Mode> in
<Connection> menu of the connected DVR to <Static IP>.
 Consult your network manager for IP, Gateway and Subnet Mask.
Connection Mode
Connection
Protocol
x Connection Mode
Static IP
x Bandwidth
2Mbps
x IP
192.168. 1.200
x Gateway
192.168. 1.
x Subnet Mask
255.255.255. 0
x DNS
Manual
1
168.126. 63. 1
OK
Cancel
• Dynamic IP (DHCP) mode
- Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to
<Dynamic IP>.
• ADSL (PPPoE: ID and password certification)
- Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection
requires user ID and password.
- DVR Network Settings : Set the <Connection Mode> in
Connection Mode
<Connection> menu of the connected DVR to <ADSL>.
Connection
Protocol
 ADSL <User ID> and <Password> should be the same to the
ADSL user information.
If you don’t know the ID and password, consult your ADSL service
provider.
x Connection Mode
ADSL
x Bandwidth
600kbps
x IP
192.168. 1.200
x Gateway
192.168. 1.
x Subnet Mask
255.255.255. 0
x DNS
Manual
x User ID
ID
x Password
********
1
168.126. 63. 1
OK
Cancel
English _61
using the DVR
When a router is used
J
 To avoid IP address conflict with the DVR's static IP, check followings :
• Setting the DVR with a static IP
- Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or
a router in a Local Area Network (LAN) environment.
• Setting the DVR Network
1. Set the <Connection Mode> in <Connection> menu of the connected DVR to <Static IP>.
2. Check whether the set IP address is in the static IP range provided by the Broadband Router.
IP, Gateway, and Subnet Mask : Consult your network manager.
 Check whether the set IP address is in the static IP range provided by the Broadband Router.
J
 If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you should
set the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~
192.168.0.254).
3. Check the Gateway address and subnet mask are equal to those set in the Broadband Router.
• Setting the DHCP IP Address of the Broadband Router
1. To access the Broadband Router’s configurations, open a web browser on the local PC that is connected
to the Broadband Router and enter the router’s address (ex : http://192.168.1.1).
2. At this stage, make the local PC's windows network configurations to the below example :
Ex) IP : 192.168.1.2
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.1
- Once connected to the Broadband Router, it prompts with password. While entering nothing to the User
Name field, enter “admin” into the password field and press <OK> to access the router configurations.
- Access the router’s DHCP configuration menu and set its DHCP server activation, and provide the start and
end address.
Set the start address (192.168.0.100) and end address (192.168.0.200).
M
 Above steps may differ from the router devices depending on the manufacturer.
• Setting Router’s Port Forwarding
1. Set the protocol to <TCP>.
2. External Port Range : Enter the TCP Port set in the
<Port(TCP)> in <Protocol> menu of the connected DVR.
If more than one DVRs are connected to the router, the
TCP port can be different.
3. Internal PC IP Address : Enter the IP address set to the
<IP> in <Connection> menu of the connected DVR.
Connection Mode
Connection
x Protocol Type
TCP
x Port(TCP)
554
x Port(UDP)
8000 ~ 8160
x Unicast/Multicast
Unicast
x Multicast IP
224.126. 63. 1
x TTL
x Webviewer Port
4. Internal Port Range : Set the same to the “External Port
Range”.
M
Protocol
~
558
5
80
OK
Cancel
 Above steps may differ from the router devices depending on the manufacturer.
Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s
network.
62_ using the DVR
DDNS Setting
DDNS is a short form of Dynamic Domain Naming System.
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters
(ex : www.google.com) to an IP address consisting of numbers (64.233.189.104).
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS
server so that the domain name can be routed to the IP address even if the IP is changed in a dynamic IP
system.
 USING THE DVR
• Setting DDNS in the DVR
Set <Protocol Type> in the <Protocol> menu of the connected DVR to the following :
Ex) Protocol Type : TCP
Port (TCP) : 0554, 0555, 0556, 0557, 0558
DDNS Site : Samsung DDNS
• DDNS Settings of the Router
Select the corresponding menu for the network transfer protocol of the router.
Live Transfer
Sets the quality of the image that is transferred from the DVR to the network.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Live Transfer> and press the
[ENTER] button.
The Live Transfer window appears.
Live Transfer
x Resolution
CIF(S)
x Quality
Low
2. Use the direction buttons (
◄ ►) to move to a desired
item and set the value.
3. When the live transfer is done, press <OK>.
 The resolution for real-time (live) transfer will be set to CIF(S).
(Page 54)
OK
Cancel
English _63
using the DVR
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
 If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set
to <OFF>, only the text notification will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
Mailing Service
SMTP
x ServerType
Event
Group
Recipient
SMTP mail Server
x Server
x Port
25
Use Authentication
x User
3. Use direction buttons (
◄ ►) to move to a desired item
and set the value.
x Password
********
x Secure Transfer
Never
•
•
•
•
TEST
•
•
•
•
x Sender
ex. user@example.net
ServerType : Displays the connected server type.
Server : Enter a server to connect to.
Port : Sets the communication port.
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
User : Enter a user to use authentication when connecting to the SMTP server.
Password : Enter the password of the SMTP server user.
Secure Transfer : Select one from <Never> and <TLS (if available)>.
Sender : Use the virtual keyboard to enter the sender’s e-mail address.
OK
Cancel
 Refer to “Using Virtual Keyboard”. (Page 36)
• TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press <OK>.
Event Setting
You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <Event>.
3. Use direction buttons (
◄ ►) to move to a desired item
and set the value.
Mailing Service
SMTP
x Event Interval
Event
Group
Recipient
10 min
Use Event Transfer
Sensor
Motion
Change P/W
HDD Info
Power On/Off
Manual Record
Video Loss
• Event Interval : Set the event interval.
 If a series of events occurs, the e-mail will be sent at the specified
OK
Cancel
interval, not on each event.
• Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4. When the event setting is done, press <OK>.
64_ using the DVR
Group Setting
You can set the group to whom the e-mail is sent, and specify the permission for each group.
You can add recipients for each group in the <Recipient> menu item.
The recipient is set separately from the DVR user group.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Mailing Service> and press the
[ENTER] button.
3. Use direction buttons (
◄ ►) to move to a desired item
and set the value.
SMTP
Group
Event
x Group
Recipient
Add
Delete
Rename
Recipient Permission
Sensor
Motion
Change P/W
HDD Info
Power On/Off
Manual Record
• Add : Select <Add> and use the virtual keyboard to add a
group.
OK
Video Loss
Cancel
 Refer to “Using Virtual Keyboard”. (Page 36)
• Delete : Deletes the selected group.
• Rename : You can reset the recipient permission of an existing group.
• Recipient Permission : Set the permission of the recipient group.
4. When the group setting is done, press <OK>.
Recipient Setting
You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
) button to move to <Mailing Service> and press the
[ENTER] button.
Mailing Service
SMTP
x Group
Event
Group
2. Select <Recipient>.
Recipient
Group
All Group
Add
Name
e-Mail Address
Delete
3. Use direction buttons (
◄ ►) to move to a desired item
and set the value.
Previous/Next Page
OK
• Add : You can select a recipient name, e-mail address or
group.
You should have created a group in the <Group> menu
item before you can add a user to the group.
 For inputting the recipient name and email address, refer to
“Using Virtual Keyboard”. (Page 36)
Cancel
Mailing Service
SMTP
x Group
Event
Recipient
Group
ABC
Group
Add
Add recipient
Name
e-Mail Address
Delete
x Name
x Email
x Select Group
ABC
OK
Cancel
4. When the recipient setting is done, press <OK>.
Previous/Next Page
OK
Cancel
English _65
 USING THE DVR
2. Select <Group>.
Mailing Service
using the DVR
CONTROLLING A PTZ DEVICE
The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference.
PTZ Device
The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
Getting started with PTZ
The PTZ camera is available, only if a channel is selected, in the following way :
 Using the button on the remote control or the front panel
Scene Mode
2011-01-01 01:10:25
Select the [PTZ] button on the remote control or the front panel.
Spot Out
PTZ Control
 Using the launcher menu
Click PTZ <
PTZ
ZOOM
Audio
Freeze
> to display the live launcher.
Stop Alarm
Record
 Using the right-click menu in Live mode
Play
Search
Backup
Right-click any area on the screen to display the context menu, and
select <PTZ Control>.
Main Menu
Shutdown
Hide Launcher
Logout
2011-01-01
01:10:25
 Using icons on the live screen
Click the PTZ <
M
> icon on the live screen.
PTZ
Alarm
Freeze
2011-01-01 01:10:25
 The PTZ function is available only if the PTZ camera is
connected so that the PTZ icon is displayed on the screen.
Using the PTZ camera
You can use one camera to perform all functions of PAN, TILT and ZOOM for monitoring multiple places and
set the preset to your preference in a desired mode.
1. Launch the <PTZ Control> menu.
As the PTZ <
> icon on the bottom right corner turns
yellow, you access the “PTZ Control” mode to display the
“PTZ Control” menu.
M
2011-01-01 01:10:25
 Be sure to configure PTZ working environments before
operation, since the PTZ Working(Active) mark can be
appeared to be activated even when PTZ is not operative.
PTZ Control CAM01
Camera Setup
Auto Pan
Select
Scan
Select
Pattern
Select
Save
Rename
Preset
Select
Delete
Delete All
Select Preset
2. Use direction keys in the launcher menu or use direction
buttons (
◄ ►) on the remote control or the front panel
to move the target area to record.
• PTZ Wheel : Clicking a nearer point to the center will move in that direction slowly; clicking a farther point
from the center will move fast.
Exit
 Keep clicking left to rotate the lens counter clockwise; keep clicking right to rotate the lens clockwise.
• Zoom : You can use the Zoom function of the PTZ camera.
• IRIS : Adjusts the intensity of radiation incoming to the iris.
66_ using the DVR
• Focus : Enables you to adjust the focus manually.
• Auto Pan : The camera automatically runs between the two points that you selected.
• Scan : The camera moves to the preset points in the specified sequence.
If multiple presets are specified, the PTZ camera will automatically move to all of the preset points one at a
time.
• Pattern : Makes the PTZ camera remember and follow the past route.
 The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are
different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.
(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan(Scan), Pattern)
 Before entering the PTZ device control mode, set the values of the PTZ device in the <Setting the PTZ> menu.
(Page 45)
Preset Setting
A preset is a set of specific target points of a PTZ camera, and up to 20 presets per a camera can be stored.
Using the mouse may help make setup easier.
1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.
2. Select the <Save> key.
The virtual keyboard for inputting the preset will appear.
 Refer to “Using Virtual Keyboard”. (Page 36)
•
•
•
•
Save : You can add and save the preset.
Rename : You can change the settings of the existing presets.
Delete : Deletes the selected preset.
Delete All : Deletes all existing presets.
M
 If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset
accordingly.
3. Press <OK>.
The preset will be saved as a name that you entered.
Camera Setting
A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.
Using the mouse may help make setup easier.
1. Connect the PTZ camera to the DVR and run the PTZ
camera again to display the camera’s protocol setting
window.
2. Check the protocol ID of the camera.
 In “Device > Setting the PTZ”, enter the PTZ camera ID in the
ID input box of the channel that is connected to the PTZ camera.
(Page 45)
2011-01-01 01:10:25
SAMSUNG PROTOCOL
ADDR
TYPE
BAUD
LENS
TILT
PAN
3. Select <Camera Setup> in the PTZ Control menu.
The camera-specific menu appears.
2011-01-01 01:10:25
** MAIN MENU **
 You can configure the settings of only those cameras that support
the protocols of Samsung, Pelco D/P, AD and Panasonic.
 If you are setting Auto Pan or Pattern in the camera menu, press
0
RS-485,HALF
9600
OK!
OK!
OK!
Camera Setup
and hold the appropriate button for a certain time so that the button
operation can be different from that in normal PTZ setting.
Exit
CAMERA SET...
...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
CLOCK SET...
SYSTEM INFO...
English _67
 USING THE DVR
M
search & play
SEARCH
You can perform the search for recorded data by the time or by the search criteria such as an event.
You can access the <Search> menu directly in Live mode.
1. In Live mode, right-click any area of the screen.
The Live menu appears.
Scene Mode
2011-01-01 01:10:25
Spot Out
ZOOM
Audio Off
2. Select <Search>.
Or, press the [SEARCH] button on the remote control or
the front panel.
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2011-01-01
01:10:25
3. The Search menu appears.
2011-01-01 01:10:25
 If you have not checked “POS USE” in the “Main Menu >
Device > POS Device” menu, the Search menu does not
include the “POS Search” item. (Page 48)
Return
Time Search
Event Search
4. The search can be restricted by the Auto Delete function.
Refer to “Setting the Recording > Record Option”.
(Page 54)
M
Backup Search
POS Search
Motion Search
 Overlapped data : It only appears if there exists overlapped
2011-01-01
01:10:25
data on a certain time, produced due to the change of DVR’s
time setup. The latest data comes first, from <List0>.
It does not appear in <Backup Search>.
Time Search
You can search for recorded data of a desired time.
As the time to display may be different depending on the time zone and the DST standard time, the time of
data recorded in the same time can be displayed differently depending on time zone and DST settings.
Using the mouse may help make setup easier.
1. Select <Time Search> in the <Search> menu.
2. Select a date to search.
Time Search
Go to First
2011-01-01
Go to Last
Overlapped Data List1
 Refer to “Using the Calendar”. (Page 35)
Zoom In
Zoom Out
00:01
All
Data
CAM 01
3. The record data on the specific date will be listed.
The display bar is different according to the data type.
So check the data type for the color in the left pane.
4. Use direction buttons (
◄ ►) to set the search criteria
and press the [ENTER] button.
•
•
•
•
CAM 02
CAM 03
2011/01/01 00:01:17
Standard
Schedule
Motion
Sensor
V.Loss
Etc
CAM 04
CAM 05
CAM 06
CAM 07
Previous/Next Page
Play
Return
Go to First : Moves to the earliest date.
Go to Last : Moves to the most recent date.
Time : Enter a time to perform the search or use the up/down button <>> to select one.
Previous/Next Page : Moves to the previous / next page. (Use the remote control or the buttons on the front
panel.)
68_ search & play
• Zoom In : The map enlarges in detail.
It will switch in the sequence of 24 hours - 16 hours - 8 hour
- 4 hours.
• Zoom Out : The map will switch in the reverse order of the
detailed mode above.
It will switch in the sequence of 4 hours - 8 hour - 16 hours 24 hours.
M
Time Search
Go to First
2011-01-01
Go to Last
Overlapped Data List1
Zoom In
Zoom Out
00:01
All
Data
CAM 01
CAM 02
CAM 03
2011/01/01 00:01:17
CAM 04
Standard
Schedule
Motion
Sensor
V.Loss
Etc
CAM 05
CAM 06
CAM 07
 Double-click a desired time to zoom it in/out.
Previous/Next Page
Play
Return
 SEARCH & PLAY
• Preview : Click <Channel> and select (click, drag) a time in
<Duration> to display a still image for the portion.
- If the selected channel does not contain any recorded data, it will be marked black.
5. Select a data item and click <Play>.
The screen switches to the data playback mode.
Event Search
You can search for events by the channel and play them.
Using the mouse may help make setup easier.
1. Select <Event Search> in the <Search> menu.
2. Use direction buttons (
◄ ►) to set the search criteria
and press the [ENTER] button.
 All record events on a specific date will be found. (Normal/
Event Search
CAM 01
2011-01-01
Overlapped Data
List1
Go to First
Date/Time Preview
3
02:47:54 ~ 02:48:59
Motion
2
00:39:06 ~ 00:40:30
Motion
1
00:01:22 ~ 00:02:28
Motion
Schedule recording included)
• Date/Time Preview : If you select a data item in the list, the
still image of the selected data will be displayed in the left
preview pane.
• Event : Displays the type of the event that occurred.
Go to Last
No.
Event
2011/01/01 00:01:22
Previous/Next Page
Play
Return
3. Select a data item and click <Play>.
The screen switches to the event data playback mode.
Backup Search
Searches for backup data in the connected backup device.
Only data in the format of DVR is included in the search.
Refer to <Type> in “Backup > Setting the Backup”. (Page 58)
Using the mouse may help make setup easier.
1. Select <Backup Search> in the <Search> menu.
2. Use direction buttons (
◄ ►) to set the search criteria
and press the [ENTER] button.
• Record Period : Displays the record period.
• Channel : Displays the recorded channel.
• Play Start Time : Select a time that you start playing.
3. Select a data item and click <Play>.
The screen switches to the backup data playback mode.
Backup Search
USB:USB2FlashStorage
No.
Folder Name
File Name
1
20110101
16190000
Previous/Next Page
x File Name
16190000
x Channel
x Record Period
2011-01-01 01:01:01 - 2011-01-01 01:01:10
x Play Start Time
2011-01-01
Play
1
16:30:52
Return
English _69
search & play
POS Search
You can search for data in the POS device that is connected to the DVR.
You can use the mouse to select the related items.
1. Select <POS Search> in the <Search> menu.
2. Use direction buttons (
◄ ►) to set the search criteria
and press the [ENTER] button.
 You can enter specific text to refine your search.
• Keyword : Use the virtual keyboard to enter a keyword.
• Search Criteria :
- <Case Sensitive> : If selected, search will be performed
case-sensitively.
POS Search
Date/Time
2011-01-01 01:01:01
2011-01-01 03:41:18
Keyword
Case Sensitive
Overlapped Data
List1
Go to First
Search
Whole Word
Go to Last
POS
CH
Start Date/Time
1
1
2011-01-01 03:41:15
CHANGE _
1
1
2011-01-01 03:41:15
CASH _
Keyword
1
1
2011-01-01 03:41:10
CASH _
2011/01/01 03:41:15
CHANGE
5.95
Previous/Next Page
Play
Return
- <Whole Word> : If selected, only the exact matches with
the keyword will be found.
• Preview : Select a data item in the list to display the preview image.
Information about the image will be displayed on the bottom of the screen.
•
: You can use these buttons to accelerate your search if you have a huge list of search results.
3. Select a data item and click <Play>.
The screen switches to the POS data playback mode.
Motion Search
If a motion is detected in each channel, you can set a desired area to perform the search.
You can use the mouse to select the related items.
1. Select <Motion Search> in the <Search> menu.
2. Use direction buttons (
◄ ►) to set the search criteria
and press the [ENTER] button.
 If you set the motion area to <Manual Area>, the <Setup>
Motion Search
Channel
CAM 01
Date/Time
2011-01-01 03:41:18
Overlapped Data
Motion Region
List1
Go to First
No.
Start Time
7
01:01:30
6
01:01:25
5
01:01:20
4
01:01:15
3
01:01:10
2
01:01:05
1
01:01:01
button will be activated.
• Motion Region : Select an area to perform the search.
Setup
All Area
2011-01-01 05:11:44
2011/01/01 01:01:30
- All Area : Searches for all areas of the selected channel.
Search
Go to Last
Previous/Next Page
- Current Area : Searches for the motion area for each
channel specified in “Motion Detection >
Setting the Motion Detection Area”. (Page 56)
Play
Return
- Manual Area : You can set the motion area manually.
• Setup : The Setup button will be activated only if you have
set the motion area to Manual. Press this button to display
the area setting window.
• Date/Time : The Date/Time will be automatically set by the
hour, and the end time will be automatically set to one hour
later than the start time if it is set.
• Preview : Select a data item in the list to display the still
image of the item.
3. Select a data item and click <Play>.
The screen switches to the motion data playback mode.
70_ search & play
Motion Region
1 CH
Individual
OK
Cancel
Apply to All CH
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help make setup easier.
1. In Live mode, click <Play> in the right-click menu or
<
> in the launcher menu, or press the Play button on
the remote control or the front panel.
Scene Mode
2011-01-01 01:10:25
Spot Out
ZOOM
Freeze
Stop Alarm
2. Use the up/down button (
) to select a menu.
Record
 For data search, refer to <Search>. (Page 68)
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2011-01-01
01:10:25
PTZ
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears
on the screen.
Alarm
Freeze
2011-01-01 01:10:25
 If there is an existing data, <Play> will start immediately
without performing the search.
• Playback Information : Displays the date and time of the
current data in the top corner.
REC
> to set the current time to the start
• Backup : Click <
time of backup; you can specify a backup area using the
mouse (yellow triangle).
Click <
> again to set the current time to the end time of
the backup and the “Backup Range” window appears.
- Type : Supports formats of DVR, AVI and SEC.
Refer to a list of formats in “Setting the Backup”.
(Page 58)
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the
selected storage device.
4. If you want to return to the Live screen in Play mode, click <
[] button on the remote control or the front panel.
2011-01-01 01:10:25
Backup Range
x Start
x End
2011-01-01 00:01:06
2011-01-01 08:25:45
x Device
USB-Storage
x Type
x Folder
\20110101\
x Filename 0001
Backup
Used
Free
Check capacity
Backup
DVR
Change
0
0
0
Cancel
> in the launcher menu or press the
English _71
 SEARCH & PLAY
Audio Off
search & play
Using the Playback Button
REC
Part Names
Functions
Play Timeline
Indicates the current playback point, and can be used to move.
Skip Backward
Moves backward by unit time.
Backward Fast
Play
Used for quick backward search while in Play.
Backward Slow
Play
Used for backward frame-by-frame search while in PAUSE.
Step Backward
Moves backward by one frame at a time.

Pause
Stop
Stops playback and moves to the live screen.
Step Forward
Moves forward by one frame at a time.
Forward Slow
Play
Ensured to play forward up to 4 channels simultaneously at a low speed.
 In a split mode, the real time playback may not be supported, depending on the record
quality, resolution and number of channels. And some frame rates may be supported.
Forward Fast
Play
Used for quick forward playback.
Skip Forward
Moves forward by unit time.
Return to the previous.
Audio
Sets Audio ON/OFF.
REC
Records all channels in Live mode.
Partial Backup
Begins backup of the selected section of the video being played, with the specified starting/
ending point.
Mode Switch
Click a desired playback mode or press [MODE] to switch the screen mode in sequence.
 The grey area in the center of the 13-split mode plays the Live channel.
The default channel of the Live mode is CH1, which can be changed later.
72_ search & play
web viewer
INTRODUCING WEB VIEWER
What is Web Viewer?
 WEB VIEWER
Web Viewer allows remote access to your DVRs. You have
access to live video, archived video, PTZ control (if configured),
etc.
PRODUCT FEATURES
• Remote access from a standard browser
• Supports PTZ camera controls
• Supports 1, 4, 8, 16 camera viewing formats (maximum of
16 cameras in the list).
• Gets JPEG format images to print and save to “Print or Save
JPEG format images”.
• Record video in AVI format-compatible with popular media players. (needed the Xvid codec)
SYSTEM REQUIREMENTS
The following lists the minimum suggested hardware and operating system requirements needed to run the
Web Viewer.
OS
Web Browser
CPU
Windows XP Professional
Windows 2000
Windows Vista Home Basic /Premium
Windows 7
Internet Explorer 6.0.2900.2180 or higher
Intel Pentium 4.2 GHz
Memory
512 MB
Monitor
High Color 16-bit 1024 x 768
HDD
50 MB(Installation space required)
* Additional HDD space required for recording.
Recorded file size will vary depending on recording quality settings.
English _73
web viewer
CONNECTING WEB VIEWER
1. Open your web browser and type the IP address or URL
of DVR into the URL address box.
M
The basic URL of the DVR is as following in case of MAC
address :
 00-00-F0-ab-cd-ef : nabcdef.websamsung.net
 00-16-6c-ab-cd-ef : mabcdef.websamsung.net
 00-68-36-ab-cd-ef : pabcdef.websamsung.net
 00-09-18-ab-cd-ef : iabcdef.websamsung.net
 You can also use registered URL which setups up in the Setup menu of your DVR.
2. Set the Admin ID and password same to those of the DVR
Admin.
For general users, enter the DVR user ID and password.
M
 It allows up to 10 simultaneous access including the Admin





and general users.
It does not allow multiple login of the Admin user.
Initial password of the Admin user is set to “4321”.
Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.
Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the
Web Viewer. (Page 39)
All settings are applied by the DVR’s settings.
3. Click <Install ActiveX Control…>.
Downloading Active-X control may take several minutes
according to the security settings on your PC.
4. Click <Install>.
5. You may have “Windows Security Alert” that attempts to
block this with the Windows Firewall. In that case, click
<Unblock> to start Web Viewer.
6. Installation is complete.
Now you can see the main screen of Live Viewer.
74_ web viewer
USING LIVE VIEWER
 WEB VIEWER
The Live Viewer screen consists of following :
This displays the IP address and the model name of the connected DVR.
These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>.
These buttons are used for the screen split and full screen mode.
Shows the IP address and model name of the connected DVR.
Select <DVR Time> or <PC Time> for the OSD time information display setting of the Live Viewer.
These buttons are used for sequence and changing the screen channel.
These buttons are used for capture, print, and save the image.
Shows the channel of the connected DVR.
These buttons are used for PTZ related functions.
This displays the screen for connected camera with DVR.
M
 The resolution is set to 1024X768 pixels.
 The initial split-screen mode is set according to the number of channels connected to DVR. You can change the
split-screen mode by clicking buttons for split-screen modes.
English _75
web viewer
OSD INFORMATION DISPLAY
The channel number, video size, and IP address of the connected
DVR are displayed.
The current date and time will be displayed according to the
selected time information display setting <DVR Time> or <PC
Time>.
Alarm icon appears when alarm is issued.
It disappears when pressed the [ALARM] button of the DVR.
Motion icon appears when motion is detected.
It disappears when pressed the [ALARM] button of the DVR.
It displays whether the PTZ controls are active.
M
 If you have set PTZ cameras for the DVR, “PTZ” is displayed on the
screen. Select a PTZ camera channel and use the [PTZ] button for camera control.
SPLIT-SCREEN
You can change the split mode by clicking each number icon.
SINGLE MODE
QUAD MODE
NINE MODE
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“SINGLE MODE”.
> button.
• Click <
The screen displays the selected camera connected to the DVR in
“QUAD MODE”.
> button.
• Click <
The screen displays the selected camera connected to the DVR in
“NINE MODE”.
> button.
• Click <
The screen displays the selected camera connected to the DVR in
“SIXTEEN MODE”.
> button.
• Click <
The screen displays the selected camera connected to the DVR in
“FULL SCREEN MODE”.
Double clicking on the screen or pressing any button of the keyboard
returns to the previous mode.
76_ web viewer
SIXTEEN MODE
CONNECTED DVR
This displays the IP address and the status of the connecting DVR.
M
 Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
 The number of simultaneous connections are limited to 10.
 WEB VIEWER
Setting the display of the OSD time information
Select <DVR Time> or <PC Time> for the OSD time information display
setting.
• DVR Time : Based on the time of the connected DVR
• PC Time : Based on the time of the PC currently running the Web Viewer.
CHANGING THE LIVE SCREEN MODE
 16-split mode does not support “SEQUENCE”, “PREVIOUS” and “NEXT”.
• SEQUENCE : When this button is clicked, screens are switched at a
preset interval.
In SINGLE MODE, the channel numbers are sequentially switched from
1 to 16.
In QUAD MODE, the screens are changed like 1st 4 channels (1~4)
2nd 4 channels (5~8)
3rd 4 channels (9~12)
4th 4 channels
(13~16).
In NINE MODE, the screens are changed from 9 channels (1~9) to 7
channels (10~16).
In SIXTEEN MODE, the screen refreshes at the preset interval.
 Preset interval (10 seconds)
• PREVIOUS : When this button is clicked, the previous screen appears.
In SINGLE MODE, the channel numbers are switched in reverse order.
In QUAD MODE, the screens are changed like 1st 4 channels (1~4)
2nd 4 channels (13~16)
3rd 4 channels (9~12)
4th 4 channels (5~8).
In NINE MODE, the screens are changed from 9 channels (1~9) to
7 channels (10~16).
In SIXTEEN MODE, the screen is refreshed.
English _77
web viewer
• NEXT : When this button is clicked, the next screen appears.
In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16.
In QUAD MODE, the screens are changed like 1st 4 channels (1~4) 2nd 4 channels (5~8)
3rd 4 channels (9~12) 4th 4 channels (13~16).
In NINE MODE, the screens are changed from 9 channels (1~9) to 7 channels (10~16).
In SIXTEEN MODE, the screen is refreshed.
 If 16-channel DVR is connected, clicking “NEXT” in QUAD MODE is to change the screen as shown in the picture.
(CH1 to CH4)
(CH5 to CH8)
(CH9 to CH12)
(CH13 to CH16)
16-channel DVR
SAVING THE LIVE SCREEN ON THE PC
• CAPTURE : Saves the current screen into a BMP or JPEG
file.
M
 The default saving path is “C:\Program Files\Samsung\Dvr
Web Viewer\SnapShot\Live”. To change the saving path, click
)> button and then select the path you
<SAVE PATH (
want. For Windows Vista or 7, the saving path is “C:\
users\(user ID)\AppData\LocalLow\Samsung\DVR Web
Viewer\Snapshot\” by default, which cannot be modified.
 The file is automatically named as following : “IP address_Port number_YYYYMMDD_camera number_index”
Ex) 192.168.1.200_554_20110101_134132_01_00
• PRINT : Prints out the selected screen out of the currently
displayed live screens. It also prints the IP address, time,
camera number and the current event status together.
78_ web viewer
• RECORD : Saves the current image on the screen and
saves it as a avi video file.
M
 To record it, it is required at least 1GB of available space.
 The default saving path is “C:\Program Files\Samsung\Dvr
CHANGING THE LIVE SCREEN CHANNEL
• Blue numbers : The channel connected to the current live
screen
• Gray numbers : The channel not connected to the current
live screen
USING PTZ CAMERA
Click the direction buttons to control the camera.
•<
>
You can zoom in or out an image by using the ZOOM button.
•<
>
You can adjust the entering light amount by using the IRIS button.
•<
>
You can adjust the focus by using the FOCUS button.
English _79
 WEB VIEWER
Web Viewer\VideoClip\Live”. To change the saving path, click
)> button and then select the path you
<SAVE PATH (
want. For Windows Vista or 7, the saving path is “C:\
users\(user ID)\AppData\Local-Low\Samsung\DVR Web Viewer\VideoClip\”
and it cannot be modified.
 The file is automatically named as following : “IP address_Port number_YYYYMMDD_camera number_index”
Ex) 192.168.1.200_554_20110101_135105_01_00
 For AVI Save, you need the Xvid codec for playing saved files.
 HDD Minimum Free Size : During the recording, if there is no more capacity available in the HDD than set free space
will prompt with a popup message : “Cannot record due to insufficient disc space in the HDD”.
web viewer
• MENU : Appears the camera menu screen.
• PRESET : Moves the lens direction to a preset direction.
1. If you click a preset, the camera moves to the selected
preset's position.
2. You can delete the selected preset or all presets.
3. You can save a new preset number and name.
M
 You can save presets up to 20.
• AUTOPAN : Moves the camera lens direction between
2 points set for the camera.
• SCAN : Moves the camera lens direction between 2 preset
points of the camera.
• PATTERN : You can set camera various movement
patterns such as zoom, move, etc. so that a camera
automatically moves according to the pattern.
M
 While the DVR controls a PTZ camera, Web Viewer cannot
control the camera.
 Camera menu setup is only available for camera supporting
the function.
 Each function of PTZ is same to that of the DVR.
 Pan/Tilt of the Smart dome camera is manipulated
automatically to center the camera to the mouse clicked
point.
 If you drag the mouse using the left button on a certain point,
Pan/Tilt of the Smart dome camera is manipulated
automatically to center the camera to the middle point between the dragging start and end position.
Upward dragging will zoom out, while downward dragging will zoom in.
 Tilt of Power PTZ operates properly within 45°.
 Power and Pan Tilt functions are only available for camera supporting the functions.
Ex : Samsung SCC-C6475
80_ web viewer
USING SEARCH VIEWER
 WEB VIEWER
The Search Viewer screen consists of following :
This displays the IP address and the model name of the connected DVR.
These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>.
These buttons are used for the screen split and full screen mode.
Shows the IP address and model name of the connected DVR.
These buttons are used for capture, print, and save the image.
This displays a calendar at which you can search the recorded video.
This displays a timeline at which you can search the recorded video by the time.
These buttons are used for controlling playback.
This displays the screen for playback of recorded video.
M
 <SEQUENCE>, <PREVIOUS>, <NEXT> buttons are not available in SEARCH menu.
English _81
web viewer
SPLIT-SCREEN
You can change the split mode by clicking each number icon.
SINGLE MODE
QUAD MODE
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“SINGLE MODE”.
• Click <
> button.
The screen displays the selected camera connected to the DVR in
“QUAD MODE”.
M
 Only SINGLE and QUAD MODE are available in SEARCH menu.
 If 16 channel DVR is connected, you can select a mode from SINGLE to
SIXTEEN MODE.
CONNECTED DVR
This displays the IP address and the status of the connecting DVR.
M
 Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied : Appears when the maximum number of users is exceeded.
 The number of simultaneous connection is limited to 3.
82_ web viewer
SAVING THE LIVE SCREEN ON THE PC
• CAPTURE : Saves the current screen into a BMP or JPEG
file.
M
 The default saving path is “C:\Program Files\Samsung\Dvr
• PRINT : Print out the current screen. It also prints IP
address, time, camera number and current event state.
• RECORD : While in playback, press this button saves the
video data of the selected channel as an AVI file. (It is saved
in the designated folder on your PC.)
To stop recording, click this button again.
M
 To record it, it is required at least 1GB of available space.
 The default saving path is “C:\Program Files\Samsung\Dvr
Web Viewer\VideoClip\Search”. To change the saving path,
)> button and then select the path you want. For Windows Vista or 7, the saving path is
click <SAVE PATH (
“C:\users\(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\VideoClip\” and it cannot be modified.
 The file is automatically named as following : “IP address_Port number_YYYYMMDD_camera number_index”
Ex) 192.168.1.200_554_20110101_135105_01_00
 For AVI save, you need the Xvid codec for playing saved files.
English _83
 WEB VIEWER
Web Viewer\SnapShot\Search”. To change the saving path,
click <SAVE PATH (
)> button and then select the path
you want. For Windows Vista or 7, the saving path is “C:\
users\(user ID)\AppData\LocalLow\Samsung\DVR Web
Viewer\Snapshot\”and it cannot be modified.
 The file is automatically named as following : “IP address_Port number_YYYYMMDD_camera number_index”
Ex) 192.168.1.200_554_20110101_134132_01_00
web viewer
SEARCHING THE RECORDED VIDEO IN THE CALENDAR
If the video data has been recorded on a date, the date is
distinguished in green. If you click the date, the recorded
video information is displayed in the time line. When you click
<Today>, it will be synchronized with the system time (date)
of the current PC.
SEARCHING THE RECORDED VIDEO IN THE TIMELINE
It displays the recorded video data status on the DVR after a date is
selected. The normal mode displays the time ranging from 0 to 24 Hours
while the extension mode displays the time every 2 hours.
[Normal Mode]
• If you click < > button, it changes to the extension mode.
• Each time line represents 1 hour.
[Extension Mode]
• If you click < > button, it changes to the normal mode.
• Each time line represents 5 minutes.
M
 The channels are ranging from CH01 to CH16.
84_ web viewer
CONTROLLING PLAYBACK
 WEB VIEWER
Fast Backward : Reverse-plays faster(2x).
Reverse Play : Performs Reverse Play.
Play : Performs playback.
Fast Forward : Plays faster(2x).
Go to First : Moves the beginning time of recorded video in the time line.
Step Backward : Performs one step reverseplay by one frame.
Pause : Stops the playback temporarily.
Step Forward : Performs one step forward by one frame.
Go to Last : Moves the last time of recorded video in the time line.
VIEWER SETUP
You can configure the DVR settings remotely on the network.
To configure the DVR settings, click <Setup>.
System
You can configure the various settings of the DVR system.
Date/Time/Language
For more information, refer to <Date/Time/Language> in the <System Setup> menu. (Page 34)
1. Select <Date/Time/Language> in the System menu.
2. Configure the DVR settings according to your system
environment.
• Date/Time
Set the date and time.
English _85
web viewer
• Time Synchronization Setup
Set the time synchronization.
• Display
Date Format : Set the date type.
Time : Select a time format to display on the screen.
• DST (Daylight Saving Time)
DST is displayed an hour ahead of the standard time of the
time zone.
• Language
Select a preferred language for the DVR.
Holiday
You can set specific dates to Holidays according to your
preferences.
For more information, refer to <Setting Holiday> in the
<System Setup> menu. (Page 35)
Permission Management
For more information, refer to <Permission Management> in the <System Setup> menu. (Page 36)
• Admin
You can change the admin ID or the password.
86_ web viewer
• Group
Users are classified into groups and the permission can be
set according to the group.
 First of all, add a group.
 WEB VIEWER
• User
You can add, change or remove a user or users.
• Setup
You can set the user permission.
System Management
For more information, refer to <System Management> in the <System Setup> menu. (Page 40)
• System Information
You can see information of the current system.
Check the software version, broadcast format and
MAC address.
English _87
web viewer
Device
You can check a list of devices that are connected to the DVR and configure the necessary settings.
Click <Device> in the menu screen.
For more information, refer to “Setting the Device”. (Page 44)
Camera
• Camera
You can configure the settings of the camera that is
connected to the DVR.
• PTZ
You can configure the settings of the PTZ camera that is
connected to the DVR.
Set the ID and protocol.
Storage Device
You can check and change the settings of the storage device.
• Device
You will see a list of storage devices that are connected to the
DVR.
You can check the type, used/total, usage and status of the
device.
88_ web viewer
• HDD Alarm
You can set the alarm output channel and the alarm duration
for an error.
 WEB VIEWER
Remote Device
You can see a list of remote devices including PTZ cameras
and system keyboards that are connected to the RS-485 port
of the DVR and configure the necessary settings.
POS Device
You can set the channel, preset and communication port of
the POS device that is connected to the DVR.
M
 You cannot set to use the POS device remotely.
Monitor
• Monitor
You can configure the monitoring screen settings and set the
output system.
English _89
web viewer
• Spot Out
If an event occurs such as sensor, motion or alarm from the
Spot Out port in connection with a monitor, you can select a
output screen mode.
• Mode
You can switch between live mode and play mode.
Record
For more information, refer to <Setting the Recording>. (Page 52)
Recording Schedule
If you set a recording schedule for a specific date and time,
the recording will start at that specific time.
- Apply to All CH : Click <Apply to All CH> to display the
confirmation window.
90_ web viewer
Event Record Duration
You can set the start and end times of recording that will be
activated if an event occurs.
 WEB VIEWER
REC Quality & Resolution
• Standard/Event
You can set the resolution, frame rate and recording quality
for each channel.
Record Option
You can set the Disk End Mode.
Event
For more information, refer to <Setting the Event>. (Page 55)
Sensor Detection
You can set the sensor operation mode and the synchronized
camera as well as the alarm output type and the duration.
English _91
web viewer
Motion Detection
You can set the motion detection mode and the sensitivity
as well as the alarm output type and the duration.
• Motion Region
Set the target motion detection area
Video Loss Detection
You can set the alarm output time if a video loss occurs.
Alarm Schedule
You can schedule the alarm output according to the day of
the week and the time.
The default setting is Event Sync, which activates the alarm
only if an event occurs.
92_ web viewer
Network
For more information, refer to <Network Configuration>. (Page 59)
Connection
A remote user can access the DVR via the network to check
the current mode and the IP address.
• Connection
 WEB VIEWER
You can set the network connection route.
• Protocol
You can configure the protocol related settings.
DDNS
You can check the DDNS settings.
Live Transfer
A remote user can set the images of the DVR.
• Live Transfer
The image resolution for the data received by the remote user
will be fixed to CIF.
English _93
web viewer
Mailing Service
You can specify the SMTP server that sends a mail if an event
occurs and set the recipient group and users.
• SMTP
You can set the server that sends mails and specify if you use
the authentication process.
• Event
You can set the event interval and specify which events the
server sends mails for.
• Group
You can add a group to receive the mail if an event occurs
and set the permission to receive the event mail for each
group.
• Recipient
You can add a user or users who will receive the mail.
94_ web viewer
ABOUT
Click <ABOUT>.
Displays the model name of connected DVR and the version
of Web Viewer.
 WEB VIEWER
MOBILE VIEWER
What is Mobile Viewer?
Mobile Viewer is management software that enables you to
connect to DVR (Digital Video Recorder) remotely and control
the video playback and PTZ operations (if confi gured) in real
time.
Key Features
• Remote access via Smart phone
• Voice Recognition
• 1-split and 4-split modes supported in Live Viewer
(However, search is not available).
• Switch channels using the touch-sensitive LCD panel
• PTZ camera operations supported (complies with the
protocol of the connected DVR)
• Up to 16 channels supported
English _95
backup viewer
SEC BACKUP VIEWER
You can play a file that is backed up in the format of SEC.
Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer.
If you run the backup file viewer, the backup data file will be automatically played.
Recommended System Requirements
PCs with a lower specification than the recommended below may not fully support forward/backward and
high-speed playback.
•
•
•
•
OS : Windows XP professional, Windows Vista, Windows 7
CPU : Intel Core2-Duo 2.4GHz or higher
RAM : DDR PC-3200 1G or more
VGA : Geforce 6200 or higher
96_ backup viewer
Name
Description
/
A toggle button. Each time you press this button, the audio output will toggle
between activated and deactivated.
Audio
You can adjust the volume level from 0 to 100.
Screen Printout
Prints out the current screen. You should have installed the appropriate
printer driver before you can print out the screen.
File Tamper
Detection
/
Deinterlace
A toggle button. Each time you press this button, it will toggle between
activated and deactivated. The closed lock icon indicates activation of the file
tamper detection, which will blink the screen three times and stop playing if
an unauthorized manipulation of a data file is detected.
 A message of "The file is forged” will display in the menu bar.
You can enable the De-interlace function.
Collapses the time range that is displayed on the range bar of the storage
time. You can collapse the range bar until the overall range is shortened to 24
hours.
Zoom In/Out
Enlarges the time range that is displayed on the range bar of the storage
time. You can enlarge the range bar until the overall range is extended to 1
minute.
Display of storage time range
Displays the time range of a stored video file.
You can move the gridline of the range bar to select a time point to play.
A toggle button; each time you press this button, the "Slow Playback " icon
changes its color to display it’s activated/deactivated. If it is activated, you
can use the play speed control to adjust the play speed up to x1/16 forward
and backward respectively, whereas if deactivated, you can adjust up to x16
forward and backward.
Speed
A toggle button; each time you press this button, the "Lock Speed" icon
changes its color to display it’s activated/deactivated.
If activated, the adjusted speed will be kept even if you release the mouse on
the speed bar. If deactivated, the adjusted speed will be applied only while
you use the mouse to hold the adjusted speed, and if you release the mouse,
the speed will restore to x1.
You can adjust the play speed up to x16 forward and backward respectively,
which varies according to the frame rate per second of the source.
Fast playback maximum is limited to x2 for footages recorded at 20 ~ 30 ips
(frames per second), x4 for 11 ~ 19 ips, x8 for 6 ~ 10 ips, and x16 for footages
recorded at slower than 6 ips.
Displays the next frame. This is available only if the playback is stopped.
Play
A toggle button. Press it once to start playing the video and switch the button
mode to 'Pause', and press it again to switch the button mode to Play and
stop playing temporarily.
Displays the previous frame. This is available only if the playback is stopped.
English _97
 BACKUP VIEWER
Saves the current screen as an image file. Supported file formats include
BMP and JPEG.
appendix
PRODUCT SPECIFICATION
Details
Item
SRD-1652D
Inputs
16 composite video 0.5–1 Vpp
Resolution
704x480 NTSC, 704x576 PAL
Frame rate
480ips NTSC, 400ips PAL
Resolution
704x480 NTSC, 704x576 PAL
Multi Screen display
1/4/6/8/9/13/16/PIP
Embedded
Linux
Compression
H.264
SRD-852D
8 composite video 0.5–1 Vpp
Video
Live
240ips NTSC, 200ips PAL
1/4/6/8/9/13/PIP
Performance
OS
Record Rate
NTSC : Up to 120ips @ 704x480
PAL : Up to 100ips @ 704x576
NTSC : Up to 60ips@ 704x480
PAL : Up to 50ips@ 704x576
NTSC : Up to 240ips @ 704x240
PAL : Up to 200ips @ 704x288
NTSC : Up to 120ips @ 704x240
PAL : Up to 100ips @ 704x288
NTSC : Up to 480ips @ 352x240
PAL : Up to 400ips @ 352x288
NTSC : Up to 240ips @ 352x240
PAL : Up to 200ips @ 352x288
NTSC :
- Manual
- Schedule (Continuous/Event)
- Event(Pre/Post)
- Time lapse (0.9/1.9/3.8/7.5/15/30 ips)
Recording
Mode
PAL :
- Manual
- Schedule (Continuous/Event)
- Event(Pre/Post)
- Time lapse (0.8/1.6/3.1/6.2/12.5/25 ips)
Overwrite modes
Continuous
Pre-alarm
Up to 5sec
Post-Alarm
Up to 6 hour. (5, 10, 20, 30 sec,1, 3, 5, 10, 20 min,1, 2, 3, 4, 5, 6 hour)
Search mode
Date/time, Event, Back up, Pos, Motion (※All Search Included Preview Function)
Playback function
Fast Forward / Backward
Slow Forward / Backward
Step Forward / Backward
Search &Playback
98_ appendix
Details
Item
SRD-1652D
Storage
Transmission speed
Up to (8)Mbps, Unlimited(8M)/2/1.5/1Mbps/800/600/500/400/300/200/100/
50kbps
Bandwidth control
Selectable
Stream
H.264(Max CIF 120ips)
Remote users
Maximum
Search(3) / Live Unicast(10) / Live Multicast(20)
Protocol support
TCP/IP, DHCP, PPPoE, SMTP, NTP, HTTP, DDNS, RTP, RTSP
Monitoring
Net-i Viewer, Smart viewer, Webviewer, Smart Phone Viewer
Internal HDD
Up to 4 SATA HDDs
External HDD
-
DVD Writer (Back-up)
YES
USB (Back-up)
USB 2.0, 2 ports(Front)
File Format (Back-up)
AVI, BU (DVR Play back), EXE (Include Player)
Password Protection
1Admin, 10 Group , 10 User per 1 Group, User can be assigned authority for
function
Data Authentication
Watermark
Smart Phone
Android, i-Phone
Protocol support
RTSP/RTP(UDP), CGI, HTTP
Security
 APPENDIX
Network
SRD-852D
Interface
Smart phone
Wi-Fi : CIF Max 4ips(Single Channel) / CIF Max 4ips(Quad Channel)
Transmission speed
3G : CIF Max 4ips(Single Channel) / CIF Max 4ips(Quad Channel)
Monitors
Remote users Maximum
Live(1)
VGA
Analog RGB 800x600, 1024x768, 1280x1024 resolution
HDMI
-
Main Composite
BNC, 1 Vp-p, 75 ohm
Spot Composite
Analog Spot (1) (Single Channel, No OSD)
Loop Outputs
-
English _99
appendix
Details
Item
SRD-1652D
Audio
Inputs / Output
4 line in (Built in 4CH, RCA) / 1 line out (RCA)
Compression
ADPCM
Sampling rate
16KHz
Inputs / Outputs
Terminal 16(8) inputs (NO/NC),Terminal 1 inputs (Alarm Reset),
Terminal 4 relay outputs (NO/NC), Rating : 24V DC/1A, 125V AC / 0.5A
Remote notification
Notification via e-mail
Ethernet
1 RJ45 10/100 Base-T
Serial interface
RS-232/RS-485 for PTZ, System Keyboard
USB
USB 2.0, 2 ports(Front)
e-SATA
-
Application Supoort
Mouse, Remote Controller
PTZ Protocol support
Samsung-E/ Samsung-T/ Pelco-D/ Pelco-P / Panasonic/ Phillips/ AD/ DIAMOND/
ERNA/ GE/ VCL TP/VICON
Alarm
Connections
SRD-852D
General
Input Voltage /Current 100 to 240 VAC ±10%; 50/60 Hz, Autoranging
Electrical
Environmental
Power consumption
Max. 55 W (with 1x HDD)
Operating
Temperature /
Humidity
+0°C to +40°C (+32°F to +104°F)/20%RH to 85%RH
Dimension (W x H x D) 440 x 88 x 426.8 mm (17.32 x 3.46 x 16.80 inch)
Mechanical
Lauguage
100_ appendix
Weight (With hard
disks)
Approx. 7.5 kg
Rack mount kit
2 EA
Korean, Japanese, Chinese, English, French, German, Spanish, Italian, Russian,
Polish, Czech, Turkish, Netherlands, Portuguese,Swedish,Danish, Thailandais,
Rumania, Serbia, Croatia, Hungary, Greek (22 Language)
95,9 (3.78")
88,0 (3.46")
13,8
(0.54")
452,4 (17.81")
426,8 (16.80")
11,8
(0.46")
 APPENDIX
440,0 (17.32")
7,9
(0.31")
PRODUCT OVERVIEW
• SRD-1652D
unit : mm (inches)
English _101
appendix
DEFAULT SETTING
This returns the factory default settings.
The settings are made as follows;
• Use System/Load Factory Default in MENU
 The default settings are based on SRD-1652D
Category
Details
Date/Time/Language
Date/Time/Language
System Settings
Admin
Permission
Management
Setting
System Management
System Information
Camera
Camera
PTZ
Screen Setup
Device
Storage Device
Remote Device
102_ appendix
HDD Alarm
Factory Default
Date
YYYY-MM-DD
Time Format
24 hours
Time Zone
GMT
Time Synchronize
OFF
DST
OFF
Language
English
ID
admin
New Password
4321
Restricted Access
All
Auto Logout
OFF
Broadcast Format
NTSC/PAL
Video
ON
Audio
OFF
CH Name
CAM 01 ~ CAM 16
SEQ-Dwell Time
5sec
ID
Camera No.
Protocol
None
Brightness
50
Contrast
50
Color
50
Check Alarm Output Port
OFF
Duration
OFF
Replace Alarm Output Port
OFF
Duration
OFF
Baudrate
9600
Parity
None
Data
8
Stop bit
1
Transfer Type
Half Duplex
System Keyboard
OFF
Remote Control
ON(00)
Category
Details
Factory Default
POS Device
OFF
Display
Monitor
Device
Spot Out
Mode
800x600
Sharpness
Level1(Low)
Display Position Setup
30
Spot Out
CH1
Live Mode
ALL
Play Mode
ALL
Channel 1
Event
Event Record
Duration
PRE Event
OFF
POST Event
1 min
REC Quality/
Resolution
Event
Record Option
Sensor Detection
Event
5 sec
VGA
Recording Schedule
Normal Recording
Recording
Switch to Split Screen
Motion Detection
Video Loss
Detection
Alarm Schedule
Disk End Mode
Resolution
CIF(S)
Frame Rate
7.5 ips
Record Quality
Level 4
Resolution
4CIF(L)
Frame Rate
30 ips
Record Quality
Level 4
Setup
Overwrite
Disk End Beep
OFF
Auto Delete
OFF
Sensor Operation
OFF
Camera
Camera No.
Alarm
None
Duration
10 sec
Mode
OFF
Sensitivity
Level10(high)
Alarm
None
Duration
10 sec
Motion Region
All Area
Video Loss State
OFF
Alarm
None
Duration
10 sec
Alarm1
Event Sync
English _103
 APPENDIX
Monitor
All
appendix
Category
Details
Connection
Connection Mode
Protocol
Network
DDNS
Live Transfer
Factory Default
Connection Mode
Static IP
Bandwidth
2Mbps
IP
192.168.1.200
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
DNS
168.126.63.1
Protocol Type
TCP
Port (TCP)
554~558
Webviewer Port
80
DDNS Site
OFF
Resolution
CIF(S)
Quality
Low
Server
SMTP
Mailing Service
Event
Group
104_ appendix
OFF
Port
25
Use Authentication
OFF
Secure Transfer
Never
Event Interval
10 min
Use Event Transfer
OFF
Group
OFF
Recipient Permission
OFF
TROUBLESHOOTING
Symptom
Countermeasures
y Check if the power supply system is properly connected.
y Check the system for the input voltage from the power source.
y If the problem persists even after you have taken the above actions,
check the power supplier and replace it with a new one if neccessary.
Some channels display just a black screen even if
they receive video sources.
y Check if the camera connected to the system properly displays the
image. Sometimes, this problem may occur on a camera that is not
properly connected to the video source.
y Check if the camera is properly supplied with power.
y Sometimes, this problem may occur on a channel with weak video
signal from a video distributor that is connected to multiple systems. In
this case, input the video source of the camera directly into the DVR.
This may find the cause and solve the problem.
If I press the [REC] button on the front panel, the
REC indicator does not flash, nor the player start
recording.
y Check if there is a free space on the HDD for the recording.
y Check if the record mode is set to ON in the record mode setting.
The screen displays the logo image repeatedly.
y This may occur from a problem with the main board, or the related
software is corrupt.
Contact the nearest service center for more information.
The Channel button does not work on the Live
screen.
y The Channel button does not work if the current screen is in the event
monitoring mode.
In the event monitoring screen, press the [ALARM] button to exit the
screen and select a channel.
The cursor will not move to the Start button when I
start the calendar search.
y Check if the channel and the date that you want to play are marked
with the V symbol.
Both channel and date should be checked before you can start playing
with the Start button.
When the alarm sounds, I press the [ALARM] button
on the front panel to release the alarm but it does
not work. The alarm persists and I could not set it off
in any way.
y Press the [MENU] button on the front panel to release the alarm in the
following way:
1) To release the event monitoring mode : Monitoring Mode – set the
duration of the event monitoring to Off.
2) To release the alarm sound : Event Record Mode - Alarm (Motion
Detection/Video Loss) – deactivate the alarm sound.
3) To release the event : Event Record Mode - Alarm (Motion Detection/
Video Loss) – set the mode to Off.
No response is made even if I press the [PTZ] button
on the Live screen.
y Menu Camera Check if the current protocols and other settings
in the PTZ device are properly configured according to the PTZ camera.
English _105
 APPENDIX
The system does not turn on and the indicator on the
front panel does not work at all.
appendix
Symptom
Countermeasures
I've found that the DVR does not recognize as many
disks as installed when I have connected multiple
external HDDs to the DVR.
y It takes time for the DVR to recognize multiple external HDDs. Try again
in a moment and if the problem (of failure to recognize as many HDDs
as connected) persists, it may occur due to a mechanical error of the
HDD installed. Try again with a different HDD.
A message of “Need to reset date/time.” Is displayed
on the screen.
y This message is displayed if there occurs a problem with the time
setting of the internal clock or an error in the clock itself.
Contact the retailer or the service center for more information.
The time bar is not displayed in Search mode.
y The timeline can switch between normal and extension mode.
In extension mode, the time bar may not be displayed in the current
timeline. Switch to normal mode or use the left or right button to
navigate through the time bar.
The “NO HDD” icon and an error message are
displayed.
y Check the HDD for connection. If the problem persists in a normal
condition, contact the nearest service center to have the HDD checked
by the service personnel.
I have installed an additional HDD on the DVR but it
does not recognize the HDD.
y See the compatibilty list to check if the additional HDD is supported by
the DVR. For the compatibility list, contact the retailer where you
purchased the DVR.
I have connected an external storage device (external
SATA HDD) to the DVR but the DVR seems not to
recognize it.
y See the compatibility list of external storage devices to check if the
connected device is supported by the DVR.
For the compatibility list, contact the retailer where you purchased the
DVR.
If I press the ESC key in full screen mode of the
WebViewer, the system does not switch to a normal
split mode.
y Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC
key again. The system will switch to a normal split mode.
I found it difficult to configure the network settings if
using the default search, backup and router settings.
y For more information, refer to the user manual.
y If you want to check the basics of the product for a quick start, refer to
the quick start guide (backup, search).
y If you use the router for network connection, refer to the “Connecting
to the Internet using the router” section in this manual.
I forgot the password.
y Contact the DVR administrator for help.
Backup data is just not played by the PC or DVR.
y When you are backing up data, you have choices about the player
either: PC or DVR. Make your selection before proceeding.
y If you are using the PC to play the data, the format of the backup file
should be either AVI or SEC.
y If you are using the DVR for this purpose, formatting backup files should
be done by the DVR.
My player does not switch to Live mode while in
playback.
y Press the Stop [@] button on the DVR or the remote control, or click the
[
] icon on the launcher to switch to Live mode.
106_ appendix
Symptom
Countermeasures
y If your player does not display a Live image at all, that indicates
recording does not work so first check if you see an image on the
screen.
y Recording does not work if the recording settings are not properly
configured.
1) Manual Record: Press the [REC] button on the front panel of the DVR
or on the remote control to start recording.
2) Scheduled Record: Specify a desired time in Menu – Record Recording Schedule. Recording will start at the specified time.
- <Continuous> Record: Recording will proceed in any conditions
at the specified time.
- <Event> Record: When an event occurs, recording will perform
only if the event is of alarm, motion detection and video loss.
If there is no event found, recording will not perform.
- <Continuous / Event> Record: If there is no event found,
Continuous recording will perform. Whereas, if an event occurs,
Event recording will perform.
The image quality of the recording data is not good.
y Increase the resolution and quality level in Menu – Record – Quality /
Resolution.
1) Resolution: Select a bigger size when specifying the recording size.
(4CIF>2CIF>CIF)
The recording image in the CIF format shows a deteriorated quality
as it is enlarged from a small-sized image.
2) Record Quality: Specify a bigger level for the recording quality.
y If you increase the resolution and the recording quality, the data size
increases accordingly. So the HDD will be filled faster. Overwriting will
overwrite the existing data so recording will proceed at a shorter
interval.
English _107
 APPENDIX
Recording does not work.
OPEN SOURCE LICENSE REPORT ON THE PRODUCT
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may
obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this
product by sending email to help.cctv@samsung.com
If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost
of physically performing source distribution might be charged.
• GPL Software : linux kernel, Sysvinit, dosfstools, wget, msmtp, busybox, cdrtools, dvd+rw-tools, iconv, smartctl,
uboot, minicom, openssl, bash, lm_sensors
• LGPL Software : glibc, vmstat, inetutils
• OpenSSL License : OpenSSL
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take
away your freedom to share and change it. By contrast,
the GNU General Public License is intended to
guarantee your freedom to share and change free
software to make sure the software is free for all its
users. This General Public License applies to most of
the Free Software Foundation’s software and to any
other program whose authors commit to using it.
(Some other Free Software Foundation software is
covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to
distribute copies of free software (and charge for this
service if you wish), that you receive source code or can
get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you
know you can do these things.
To protect your rights, we need to make restrictions
that forbid anyone to deny you these rights or to ask
you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies
of the software, or if you modify it.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients
all the rights that you have. You must make sure that
they, too, receive or can get the source code. And you
must show them these terms so they know their rights.
We protect your rights with two steps:
(1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute
and/or modify the software.
Also, for each author’s protection and ours, we want to
make certain that everyone understands that there is no
warranty for this free software. If the software is
modified by someone else and passed on, we want its
recipients to know that what they have is not the
original, so that any problems introduced by others will
not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by
software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain
patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that
any patent must be licensed for everyone’s free use or
not licensed at all. The precise terms and conditions for
copying, distribution and modification follow.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin S
0. This License applies to any program or other work
which contains a notice placed by the copyright holder
saying it may be distributed under the terms of this
General Public License. The “Program”, below, refers to
any such program or work, and a “work based on the
Program” means either the Program or any derivative
work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim
or with modifications and/or translated into another
language. (Hereinafter, translation is included without
limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and
modification are not covered by this License; they are
outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered
only if its contents constitute a work based on the
Program (independent of having been made by running
the Program). Whether that is true depends on what the
Program does.
1. You may copy and distribute verbatim copies of the
Program’s source code as you receive it, in any
medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the
absence of any warranty; and give any other recipients
of the Program a copy of this License along with the
Program.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Program
or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files to carry
prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute or
publish, that in whole or in part contains or is
derived from the Program or any part thereof, to
be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands
interactively when run, you must cause it, when
started running for such interactive use in the
most ordinary way, to print or display an
announcement including an appropriate copyright
notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that
users may redistribute the program under these
conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself is
interactive but does not normally print such an
announcement, your work based on the Program
is not required to print an announcement.)
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution
of derivative or collective works based on the Program.
In addition, mere aggregation of another work not
based on the Program with the Program (or with a work
based on the Program) on a volume of a storage or
distribution medium does not bring the other work
under the scope of this License.
3. You may copy and distribute the Program (or a work
based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
a) Accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least
three years, to give any third party, for a charge no
more than your cost of physically performing
source distribution, a complete machine-readable
copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as
to the offer to distribute corresponding source
code. (This alternative is allowed only for
noncommercial distribution and only if you
received the program in object code or executable
form with such an offer, in accord with Subsection
b above.)
The source code for a work means the preferred form
of the work for making modifications to it. For an
executable work, complete source code means all the
source code for all modules it contains, plus any
associated interface definition files, plus the scripts used
to control compilation and installation of the executable.
However, as a special exception, the source code
distributed need not include anything that is normally
distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by
offering access to copy from a designated place, then
offering equivalent access to copy the source code
from the same place counts as distribution of the
source code, even though third parties are not
compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute
the Program except as expressly provided under this
License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will
automatically terminate your rights under this License.
However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full
compliance.
5. You are not required to accept this License, since
you have not signed it. However, nothing else grants
you permission to modify or distribute the Program or
its derivative works. These actions are prohibited by law
if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions
for copying, distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or any work
based on the Program), the recipient automatically
receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms
and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or
allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If
you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other
pertinent obligations, then as a consequence you may
not distribute the Program at all. For example, if a
patent license would not permit royalty-free
redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be
to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or
unenforceable under any particular circumstance, the
balance of the section is intended to apply and the
section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free
software distribution system, which is implemented by
public license practices. Many people have made
generous contributions to the wide range of software
distributed through that system in reliance on consistent
application of that system; it is up to the author/donor
to decide if he or she is willing to distribute software
through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what
is believed to be a consequence of the rest of this
License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who
places the Program under this License may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case,
this License incorporates the limitation as if written in
the body of this License.
9. The Free Software Foundation may publish revised
and/or new versions of the General Public License from
time to time. Such new versions will be similar in spirit to
the present version, but may differ in detail to address
new problems or concerns.
Each version is given a distinguishing version number. If
the Program specifies a version number of this License
which applies to it and “any later version”, you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation. If the Program does not specify a
version number of this License, you may choose any
version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into
other free programs whose distribution conditions are
different, write to the author to ask for permission. For
software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO
YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED
BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
with the library. If this is what you want to do, use the
GNU Lesser General Public License instead of this
License.
If you develop a new program, and you want it to be of
the greatest possible use to the public, the best way to
achieve this is to make it free software which everyone
can redistribute and change under these terms.
To do so, attach the following notices to the program. It
is safest to attach them to the start of each source file
to most effectively convey the exclusion of warranty;
and each file should have at least the “copyright” line
and a pointer to where the full notice is found.
one line to give the program’s name and an idea of
what it does.
Copyright (C) yyyy name of author
GNU GENERAL PUBLIC LICENSE
This program is free software; you can redistribute it
and/or modify it under the terms of the GNU General
Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General
Public License along with this program; if not, write to
the Free Software Foundation, Inc., 51 Franklin Street,
Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by
electronic and paper mail. If the program is interactive,
make it output a short notice like this when it starts in
an interactive mode:
Gnomovision version 69, Copyright (C) year name of
author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type ‘show w’. This is free
software, and you are welcome to redistribute it under
certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’
should show the appropriate parts of the General Public
License. Of course, the commands you use may be
called something other than ‘show w’ and ‘show c’;
they could even be mouse-clicks or menu items-whatever suits your program.
You should also get your employer (if you work as a
programmer) or your school, if any, to sign a “copyright
disclaimer” for the program, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in
the program ‘Gnomovision’ (which makes passes at
compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989 Ty Coon, President
of Vice This General Public License does not permit
incorporating your program into proprietary programs. If
your program is a subroutine library, you may consider
it more useful to permit linking proprietary applications
Version 3, 29 June 2007
Copyright © 2007 Free Software Foundation, Inc.
<http://fsf.org/>
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Preamble
The GNU General Public License is a free, copyleft
license for software and other kinds of works.
The licenses for most software and other practical
works are designed to take away your freedom to share
and change the works. By contrast, the GNU General
Public License is intended to guarantee your freedom to
share and change all versions of a program--to make
sure it remains free software for all its users. We, the
Free Software Foundation, use the GNU General Public
License for most of our software; it applies also to any
other work released this way by its authors. You can
apply it to your programs, too.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to
distribute copies of free software (and charge for them if
you wish), that you receive source code or can get it if
you want it, that you can change the software or use
pieces of it in new free programs, and that you know
you can do these things.
To protect your rights, we need to prevent others from
denying you these rights or asking you to surrender the
rights. Therefore, you have certain responsibilities if you
distribute copies of the software, or if you modify it:
responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must pass on to the
recipients the same freedoms that you received. You
must make sure that they, too, receive or can get the
source code. And you must show them these terms so
they know their rights.
Developers that use the GNU GPL protect your rights
with two steps: (1) assert copyright on the software,
and (2) offer you this License giving you legal permission
to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL
clearly explains that there is no warranty for this free
software. For both users' and authors' sake, the GPL
requires that modified versions be marked as changed,
so that their problems will not be attributed erroneously
to authors of previous versions.
Some devices are designed to deny users access to
install or run modified versions of the software inside
them, although the manufacturer can do so. This is
fundamentally incompatible with the aim of protecting
users' freedom to change the software. The systematic
pattern of such abuse occurs in the area of products for
individuals to use, which is precisely where it is most
unacceptable. Therefore, we have designed this version
of the GPL to prohibit the practice for those products. If
such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in
future versions of the GPL, as needed to protect the
freedom of users.
Finally, every program is threatened constantly by
software patents. States should not allow patents to
restrict development and use of software on generalpurpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free
program could make it effectively proprietary. To
prevent this, the GPL assures that patents cannot be
used to render the program non-free.
The precise terms and conditions for copying,
distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU General
Public License.
“Copyright” also means copyright-like laws that apply to
other kinds of works, such as semiconductor masks.
“The Program” refers to any copyrightable work
licensed under this License. Each licensee is addressed
as “you”. “Licensees” and “recipients” may be
individuals or organizations.
To “modify” a work means to copy from or adapt all or
part of the work in a fashion requiring copyright
permission, other than the making of an exact copy.
The resulting work is called a “modified version” of the
earlier work or a work “based on” the earlier work.
A “covered work” means either the unmodified Program
or a work based on the Program.
To “propagate” a work means to do anything with it
that, without permission, would make you directly or
secondarily liable for infringement under applicable
copyright law, except executing it on a computer or
modifying a private copy. Propagation includes copying,
distribution (with or without modification), making
available to the public, and in some countries other
activities as well.
To “convey” a work means any kind of propagation that
enables other parties to make or receive copies. Mere
interaction with a user through a computer network,
with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal
Notices” to the extent that it includes a convenient and
prominently visible feature that (1) displays an
appropriate copyright notice, and (2) tells the user that
there is no warranty for the work (except to the extent
that warranties are provided), that licensees may convey
the work under this License, and how to view a copy of
this License. If the interface presents a list of user
commands or options, such as a menu, a prominent
item in the list meets this criterion.
1. Source Code.
The “source code” for a work means the preferred form
of the work for making modifications to it. “Object code”
means any non-source form of a work.
A “Standard Interface” means an interface that either is
an official standard defined by a recognized standards
body, or, in the case of interfaces specified for a
particular programming language, one that is widely
used among developers working in that language.
The “System Libraries” of an executable work include
anything, other than the work as a whole, that (a) is
included in the normal form of packaging a Major
Component, but which is not part of that Major
Component, and (b) serves only to enable use of the
work with that Major Component, or to implement a
Standard Interface for which an implementation is
available to the public in source code form. A “Major
Component”, in this context, means a major essential
component (kernel, window system, and so on) of the
specific operating system (if any) on which the
executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code
form means all the source code needed to generate,
install, and (for an executable work) run the object code
and to modify the work, including scripts to control
those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally
available free programs which are used unmodified in
performing those activities but which are not part of the
work. For example, Corresponding Source includes
interface definition files associated with source files for
the work, and the source code for shared libraries and
dynamically linked subprograms that the work is
specifically designed to require, such as by intimate
data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything
that users can regenerate automatically from other parts
of the Corresponding Source.
The Corresponding Source for a work in source code
form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the
term of copyright on the Program, and are irrevocable
provided the stated conditions are met. This License
explicitly affirms your unlimited permission to run the
unmodified Program. The output from running a
covered work is covered by this License only if the
output, given its content, constitutes a covered work.
This License acknowledges your rights of fair use or
other equivalent, as provided by copyright law.
You may make, run and propagate covered works that
you do not convey, without conditions so long as your
license otherwise remains in force. You may convey
covered works to others for the sole purpose of having
them make modifications exclusively for you, or provide
you with facilities for running those works, provided that
you comply with the terms of this License in conveying
all material for which you do not control copyright.
Those thus making or running the covered works for
you must do so exclusively on your behalf, under your
direction and control, on terms that prohibit them from
making any copies of your copyrighted material outside
their relationship with you.
Conveying under any other circumstances is permitted
solely under the conditions stated below. Sublicensing
is not allowed; section 10 makes it unnecessary.
3. Protecting Users' Legal Rights From AntiCircumvention Law.
No covered work shall be deemed part of an effective
technological measure under any applicable law fulfilling
obligations under article 11 of the WIPO copyright treaty
adopted on 20 December 1996, or similar laws
prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal
power to forbid circumvention of technological
measures to the extent such circumvention is effected
by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit
operation or modification of the work as a means of
enforcing, against the work's users, your or third
parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's
source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on
each copy an appropriate copyright notice; keep intact
all notices stating that this License and any nonpermissive terms added in accord with section 7 apply
to the code; keep intact all notices of the absence of
any warranty; and give all recipients a copy of this
License along with the Program.
You may charge any price or no price for each copy
that you convey, and you may offer support or warranty
protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the
modifications to produce it from the Program, in the
form of source code under the terms of section 4,
provided that you also meet all of these conditions:
a) The work must carry prominent notices stating
that you modified it, and giving a relevant date.
b) The work must carry prominent notices stating that
it is released under this License and any conditions
added under section 7. This requirement modifies
the requirement in section 4 to “keep intact all
notices”.
c) You must license the entire work, as a whole,
under this License to anyone who comes into
possession of a copy. This License will therefore
apply, along with any applicable section 7
additional terms, to the whole of the work, and all
its parts, regardless of how they are packaged.
This License gives no permission to license the
work in any other way, but it does not invalidate
such permission if you have separately received it.
d) If the work has interactive user interfaces, each
must display Appropriate Legal Notices; however,
if the Program has interactive interfaces that do
not display Appropriate Legal Notices, your work
need not make them do so.
A compilation of a covered work with other separate
and independent works, which are not by their nature
extensions of the covered work, and which are not
combined with it such as to form a larger program, in or
on a volume of a storage or distribution medium, is
called an “aggregate” if the compilation and its resulting
copyright are not used to limit the access or legal rights
of the compilation's users beyond what the individual
works permit. Inclusion of a covered work in an
aggregate does not cause this License to apply to the
other parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form
under the terms of sections 4 and 5, provided that you
also convey the machine-readable Corresponding
Source under the terms of this License, in one of these
ways:
a) Convey the object code in, or embodied in, a
physical product (including a physical distribution
medium), accompanied by the Corresponding
Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a
physical product (including a physical distribution
medium), accompanied by a written offer, valid for
at least three years and valid for as long as you
offer spare parts or customer support for that
product model, to give anyone who possesses
the object code either (1) a copy of the
Corresponding Source for all the software in the
product that is covered by this License, on a
durable physical medium customarily used for
software interchange, for a price no more than
your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at
no charge.
c) Convey individual copies of the object code with a
copy of the written offer to provide the
Corresponding Source. This alternative is allowed
only occasionally and noncommercially, and only if
you received the object code with such an offer, in
accord with subsection 6b.
d) Convey the object code by offering access from a
designated place (gratis or for a charge), and offer
equivalent access to the Corresponding Source in
the same way through the same place at no
further charge. You need not require recipients to
copy the Corresponding Source along with the
object code. If the place to copy the object code
is a network server, the Corresponding Source
may be on a different server (operated by you or a
third party) that supports equivalent copying
facilities, provided you maintain clear directions
next to the object code saying where to find the
Corresponding Source. Regardless of what server
hosts the Corresponding Source, you remain
obligated to ensure that it is available for as long
as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer
transmission, provided you inform other peers
where the object code and Corresponding Source
of the work are being offered to the general public
at no charge under subsection 6d.
A separable portion of the object code, whose source
code is excluded from the Corresponding Source as a
System Library, need not be included in conveying the
object code work.
A “User Product” is either (1) a “consumer product”,
which means any tangible personal property which is
normally used for personal, family, or household
purposes, or (2) anything designed or sold for
incorporation into a dwelling. In determining whether a
product is a consumer product, doubtful cases shall be
resolved in favor of coverage. For a particular product
received by a particular user, “normally used” refers to a
typical or common use of that class of product,
regardless of the status of the particular user or of the
way in which the particular user actually uses, or
expects or is expected to use, the product. A product is
a consumer product regardless of whether the product
has substantial commercial, industrial or non-consumer
uses, unless such uses represent the only significant
mode of use of the product.
“Installation Information” for a User Product means any
methods, procedures, authorization keys, or other
information required to install and execute modified
versions of a covered work in that User Product from a
modified version of its Corresponding Source. The
information must suffice to ensure that the continued
functioning of the modified object code is in no case
prevented or interfered with solely because modification
has been made.
If you convey an object code work under this section in,
or with, or specifically for use in, a User Product, and
the conveying occurs as part of a transaction in which
the right of possession and use of the User Product is
transferred to the recipient in perpetuity or for a fixed
term (regardless of how the transaction is
characterized), the Corresponding Source conveyed
under this section must be accompanied by the
Installation Information. But this requirement does not
apply if neither you nor any third party retains the ability
to install modified object code on the User Product (for
example, the work has been installed in ROM).
The requirement to provide Installation Information does
not include a requirement to continue to provide
support service, warranty, or updates for a work that
has been modified or installed by the recipient, or for
the User Product in which it has been modified or
installed. Access to a network may be denied when the
modification itself materially and adversely affects the
operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation
Information provided, in accord with this section must
be in a format that is publicly documented (and with an
implementation available to the public in source code
form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
“Additional permissions” are terms that supplement the
terms of this License by making exceptions from one or
more of its conditions. Additional permissions that are
applicable to the entire Program shall be treated as
though they were included in this License, to the extent
that they are valid under applicable law. If additional
permissions apply only to part of the Program, that part
may be used separately under those permissions, but
the entire Program remains governed by this License
without regard to the additional permissions.
When you convey a copy of a covered work, you may
at your option remove any additional permissions from
that copy, or from any part of it. (Additional permissions
may be written to require their own removal in certain
cases when you modify the work.) You may place
additional permissions on material, added by you to a
covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for
material you add to a covered work, you may (if
authorized by the copyright holders of that material)
supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently
from the terms of sections 15 and 16 of this
License; or
b) Requiring preservation of specified reasonable
legal notices or author attributions in that material
or in the Appropriate Legal Notices displayed by
works containing it; or
c) Prohibiting misrepresentation of the origin of that
material, or requiring that modified versions of
such material be marked in reasonable ways as
different from the original version; or
d) Limiting the use for publicity purposes of names of
licensors or authors of the material; or
e) Declining to grant rights under trademark law for
use of some trade names, trademarks, or service
marks; or
f) Requiring indemnification of licensors and authors
of that material by anyone who conveys the
material (or modified versions of it) with contractual
assumptions of liability to the recipient, for any
liability that these contractual assumptions directly
impose on those licensors and authors.
All other non-permissive additional terms are
considered “further restrictions” within the meaning of
section 10. If the Program as you received it, or any part
of it, contains a notice stating that it is governed by this
License along with a term that is a further restriction,
you may remove that term. If a license document
contains a further restriction but permits relicensing or
conveying under this License, you may add to a
covered work material governed by the terms of that
license document, provided that the further restriction
does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this
section, you must place, in the relevant source files, a
statement of the additional terms that apply to those
files, or a notice indicating where to find the applicable
terms.
Additional terms, permissive or non-permissive, may be
stated in the form of a separately written license, or
stated as exceptions; the above requirements apply
either way.
8. Termination.
You may not propagate or modify a covered work
except as expressly provided under this License. Any
attempt otherwise to propagate or modify it is void, and
will automatically terminate your rights under this
License (including any patent licenses granted under
the third paragraph of section 11).
However, if you cease all violation of this License, then
your license from a particular copyright holder is
reinstated (a) provisionally, unless and until the copyright
holder explicitly and finally terminates your license, and
(b) permanently, if the copyright holder fails to notify you
of the violation by some reasonable means prior to 60
days after the cessation.
Moreover, your license from a particular copyright
holder is reinstated permanently if the copyright holder
notifies you of the violation by some reasonable means,
this is the first time you have received notice of violation
of this License (for any work) from that copyright holder,
and you cure the violation prior to 30 days after your
receipt of the notice.
Termination of your rights under this section does not
terminate the licenses of parties who have received
copies or rights from you under this License. If your
rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for
the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to
receive or run a copy of the Program. Ancillary
propagation of a covered work occurring solely as a
consequence of using peer-to-peer transmission to
receive a copy likewise does not require acceptance.
However, nothing other than this License grants you
permission to propagate or modify any covered work.
These actions infringe copyright if you do not accept
this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this
License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient
automatically receives a license from the original
licensors, to run, modify and propagate that work,
subject to this License. You are not responsible for
enforcing compliance by third parties with this License.
An “entity transaction” is a transaction transferring
control of an organization, or substantially all assets of
one, or subdividing an organization, or merging
organizations. If propagation of a covered work results
from an entity transaction, each party to that transaction
who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest
had or could give under the previous paragraph, plus a
right to possession of the Corresponding Source of the
work from the predecessor in interest, if the
predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the
exercise of the rights granted or affirmed under this
License. For example, you may not impose a license
fee, royalty, or other charge for exercise of rights
granted under this License, and you may not initiate
litigation (including a cross-claim or counterclaim in a
lawsuit) alleging that any patent claim is infringed by
making, using, selling, offering for sale, or importing the
Program or any portion of it.
11. Patents.
A “contributor” is a copyright holder who authorizes use
under this License of the Program or a work on which
the Program is based. The work thus licensed is called
the contributor's “contributor version”.
A contributor's “essential patent claims” are all patent
claims owned or controlled by the contributor, whether
already acquired or hereafter acquired, that would be
infringed by some manner, permitted by this License, of
making, using, or selling its contributor version, but do
not include claims that would be infringed only as a
consequence of further modification of the contributor
version. For purposes of this definition, “control” includes
the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive,
worldwide, royalty-free patent license under the
contributor's essential patent claims, to make, use, sell,
offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is
any express agreement or commitment, however
denominated, not to enforce a patent (such as an
express permission to practice a patent or covenant not
to sue for patent infringement). To “grant” such a patent
license to a party means to make such an agreement or
commitment not to enforce a patent against the party.
If you convey a covered work, knowingly relying on a
patent license, and the Corresponding Source of the
work is not available for anyone to copy, free of charge
and under the terms of this License, through a publicly
available network server or other readily accessible
means, then you must either (1) cause the Corresponding
Source to be so available, or (2) arrange to deprive
yourself of the benefit of the patent license for this
particular work, or (3) arrange, in a manner consistent
with the requirements of this License, to extend the
patent license to downstream recipients. “Knowingly
relying” means you have actual knowledge that, but for
the patent license, your conveying the covered work in a
country, or your recipient's use of the covered work in a
country, would infringe one or more identifiable patents in
that country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction
or arrangement, you convey, or propagate by procuring
conveyance of, a covered work, and grant a patent
license to some of the parties receiving the covered
work authorizing them to use, propagate, modify or
convey a specific copy of the covered work, then the
patent license you grant is automatically extended to all
recipients of the covered work and works based on it.
A patent license is “discriminatory” if it does not include
within the scope of its coverage, prohibits the exercise
of, or is conditioned on the non-exercise of one or more
of the rights that are specifically granted under this
License. You may not convey a covered work if you are
a party to an arrangement with a third party that is in the
business of distributing software, under which you make
payment to the third party based on the extent of your
activity of conveying the work, and under which the third
party grants, to any of the parties who would receive the
covered work from you, a discriminatory patent license
(a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or
(b) primarily for and in connection with specific products
or compilations that contain the covered work, unless
you entered into that arrangement, or that patent license
was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding
or limiting any implied license or other defenses to
infringement that may otherwise be available to you
under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from
the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your
obligations under this License and any other pertinent
obligations, then as a consequence you may not
convey it at all. For example, if you agree to terms that
obligate you to collect a royalty for further conveying
from those to whom you convey the Program, the only
way you could satisfy both those terms and this License
would be to refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public
License.
Notwithstanding any other provision of this License, you
have permission to link or combine any covered work
with a work licensed under version 3 of the GNU Affero
General Public License into a single combined work,
and to convey the resulting work. The terms of this
License will continue to apply to the part which is the
covered work, but the special requirements of the GNU
Affero General Public License, section 13, concerning
interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/
or new versions of the GNU General Public License
from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If
the Program specifies that a certain numbered version
of the GNU General Public License “or any later version”
applies to it, you have the option of following the terms
and conditions either of that numbered version or of any
later version published by the Free Software
Foundation. If the Program does not specify a version
number of the GNU General Public License, you may
choose any version ever published by the Free Software
Foundation.
If the Program specifies that a proxy can decide which
future versions of the GNU General Public License can
be used, that proxy's public statement of acceptance of
a version permanently authorizes you to choose that
version for the Program.
Later license versions may give you additional or
different permissions. However, no additional
obligations are imposed on any author or copyright
holder as a result of your choosing to follow a later
version.
END OF TERMS AND CONDITIONS
GNU LESSER GENERAL PUBLIC
LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation,
Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL.
It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MODIFIES AND/OR CONVEYS THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN
IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability
provided above cannot be given local legal effect
according to their terms, reviewing courts shall apply
local law that most closely approximates an absolute
waiver of all civil liability in connection with the Program,
unless a warranty or assumption of liability accompanies
a copy of the Program in return for a fee.
The licenses for most software are designed to take
away your freedom to share and change it. By contrast,
the GNU General Public Licenses are intended to
guarantee your freedom to share and change free
software to make sure the software is free for all its
users.
This license, the Lesser General Public License, applies
to some specially designated software packages-typically libraries--of the Free Software Foundation and
other authors who decide to use it. You can use it too,
but we suggest you first think carefully about whether
this license or the ordinary General Public License is the
better strategy to use in any particular case, based on
the explanations below.
When we speak of free software, we are referring to
freedom of use, not price. Our General Public Licenses
are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this
service if you wish); that you receive source code or can
get it if you want it; that you can change the software
and use pieces of it in new free programs; and that you
are informed that you can do these things.
To protect your rights, we need to make restrictions
that forbid distributors to deny you these rights or to ask
you to surrender these rights. These restrictions
translate to certain responsibilities for you if you
distribute copies of the library or if you modify it.
For example, if you distribute copies of the library,
whether gratis or for a fee, you must give the recipients
all the rights that we gave you. You must make sure
that they, too, receive or can get the source code. If you
link other code with the library, you must provide
complete object files to the recipients, so that they can
relink them with the library after making changes to the
library and recompiling it. And you must show them
these terms so they know their rights.
We protect your rights with a two-step method: (1) we
copyright the library, and (2) we offer you this license,
which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very
clear that there is no warranty for the free library. Also, if
the library is modified by someone else and passed on,
the recipients should know that what they have is not
the original version, so that the original author’s
reputation will not be affected by problems that might
be introduced by others.
Finally, software patents pose a constant threat to the
existence of any free program. We wish to make sure
that a company cannot effectively restrict the users of a
free program by obtaining a restrictive license from a
patent holder. Therefore, we insist that any patent
license obtained for a version of the library must be
consistent with the full freedom of use specified in this
license.
Most GNU software, including some libraries, is covered
by the ordinary GNU General Public License. This
license, the GNU Lesser General Public License, applies
to certain designated libraries, and is quite different from
the ordinary General Public License. We use this license
for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether
statically or using a shared library, the combination of
the two is legally speaking a combined work, a
derivative of the original library. The ordinary General
Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser
General Public License permits more lax criteria for
linking other code with the library.
We call this license the “Lesser” General Public License
because it does Less to protect the user’s freedom
than the ordinary General Public License. It also
provides other free software developers Less of an
advantage over competing non-free programs. These
disadvantages are the reason we use the ordinary
General Public License for many libraries. However, the
Lesser license provides advantages in certain special
circumstances.
For example, on rare occasions, there may be a special
need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To
achieve this, non-free programs must be allowed to use
the library. A more frequent case is that a free library
does the same job as widely used non-free libraries. In
this case, there is little to gain by limiting the free library
to free software only, so we use the Lesser General
Public License.
In other cases, permission to use a particular library in
non-free programs enables a greater number of people
to use a large body of free software. For example,
permission to use the GNU C Library in non-free
programs enables many more people to use the whole
GNU operating system, as well as its variant, the GNU/
Linux operating system.
Although the Lesser General Public License is Less
protective of the users’ freedom, it does ensure that the
user of a program that is linked with the Library has the
freedom and the wherewithal to run that program using
a modified version of the Library.
The precise terms and conditions for copying,
distribution and modification follow. Pay close attention
to the difference between a “work based on the library”
and a “work that uses the library”. The former contains
code derived from the library, whereas the latter must
be combined with the library in order to run.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software
library or other program which contains a notice placed
by the copyright holder or other authorized party saying
it may be distributed under the terms of this Lesser
General Public License (also called “this License”). Each
licensee is addressed as “you”.
A “library” means a collection of software functions and/
or data prepared so as to be conveniently linked with
application programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such software library
or work which has been distributed under these terms.
A “work based on the Library” means either the Library
or any derivative work under copyright law: that is to
say, a work containing the Library or a portion of it,
either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter,
translation is included without limitation in the term
“modification”.)
“Source code” for a work means the preferred form of
the work for making modifications to it. For a library,
complete source code means all the source code for all
modules it contains, plus any associated interface
definition files, plus the scripts used to control
compilation and installation of the library.
Activities other than copying, distribution and
modification are not covered by this License; they are
outside its scope. The act of running a program using
the Library is not restricted, and output from such a
program is covered only if its contents constitute a work
based on the Library (independent of the use of the
Library in a tool for writing it). Whether that is true
depends on what the Library does and what the
program that uses the Library does.
1. You may copy and distribute verbatim copies of the
Library’s complete source code as you receive it, in any
medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the
absence of any warranty; and distribute a copy of this
License along with the Library.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the
Library, and copy and distribute such modifications or
work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a software
library.
b) You must cause the files modified to carry
prominent notices stating that you changed the
files and the date of any change.
c) You must cause the whole of the work to be
licensed at no charge to all third parties under the
terms of this License.
d) If a facility in the modified Library refers to a
function or a table of data to be supplied by an
application program that uses the facility, other
than as an argument passed when the facility is
invoked, then you must make a good faith effort to
ensure that, in the event an application does not
supply such function or table, the facility still
operates, and performs whatever part of its
purpose remains meaningful.
(For example, a function in a library to compute square
roots has a purpose that is entirely well-defined
independent of the application. Therefore, Subsection
2d requires that any application-supplied function or
table used by this function must be optional: if the
application does not supply it, the square root function
must still compute square roots.)
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not
derived from the Library, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on
the Library, the distribution of the whole must be on the
terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on
the Library.
In addition, mere aggregation of another work not
based on the Library with the Library (or with a work
based on the Library) on a volume of a storage or
distribution medium does not bring the other work
under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a given
copy of the Library. To do this, you must alter all the
notices that refer to this License, so that they refer to
the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than
version 2 of the ordinary GNU General Public License
has appeared, then you can specify that version instead
if you wish.) Do not make any other change in these
notices.
Once this change is made in a given copy, it is
irreversible for that copy, so the ordinary GNU General
Public License applies to all subsequent copies and
derivative works made from that copy.
This option is useful when you wish to copy part of the
code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion
or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you accompany it with the
complete corresponding machine-readable source
code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering access
to copy from a designated place, then offering
equivalent access to copy the source code from the
same place satisfies the requirement to distribute the
source code, even though third parties are not
compelled to copy the source along with the object
code.
5. A program that contains no derivative of any portion
of the Library, but is designed to work with the Library
by being compiled or linked with it, is called a “work that
uses the Library”. Such a work, in isolation, is not a
derivative work of the Library, and therefore falls outside
the scope of this License.
However, linking a “work that uses the Library” with the
Library creates an executable that is a derivative of the
Library (because it contains portions of the Library),
rather than a “work that uses the library”. The
executable is therefore covered by this License. Section
6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from
a header file that is part of the Library, the object code
for the work may be a derivative work of the Library
even though the source code is not. Whether this is true
is especially significant if the work can be linked without
the Library, or if the work is itself a library. The threshold
for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters,
data structure layouts and accessors, and small macros
and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless
of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library
will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you
may distribute the object code for the work under the
terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are
linked directly with the Library itself.
6. As an exception to the Sections above, you may also
combine or link a “work that uses the Library” with the
Library to produce a work containing portions of the
Library, and distribute that work under terms of your
choice, provided that the terms permit modification of
the work for the customer’s own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the
work that the Library is used in it and that the Library
and its use are covered by this License. You must
supply a copy of this License. If the work during
execution displays copyright notices, you must include
the copyright notice for the Library among them, as well
as a reference directing the user to the copy of this
License. Also, you must do one of these things:
a) Accompany the work with the complete
corresponding machine-readable source code for
the Library including whatever changes were used
in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an
executable linked with the Library, with the
complete machine readable “work that uses the
Library”, as object code and/or source code, so
that the user can modify the Library and then
relink to produce a modified executable containing
the modified Library. (It is understood that the user
who changes the contents of definitions files in the
Library will not necessarily be able to recompile
the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking
with the Library. A suitable mechanism is one that
(1) uses at run time a copy of the library already
present on the user’s computer system, rather
than copying library functions into the executable,
and (2) will operate properly with a modified
version of the library, if the user installs one, as
long as the modified version is interfacecompatible with the version that the work was
made with.
c) Accompany the work with a written offer, valid for
at least three years, to give the same user the
materials specified in Subsection 6a, above, for a
charge no more than the cost of performing this
distribution.
d) If distribution of the work is made by offering
access to copy from a designated place, offer
equivalent access to copy the above specified
materials from the same place.
e) Verify that the user has already received a copy of
these materials or that you have already sent this
user a copy.
For an executable, the required form of the “work that
uses the Library” must include any data and utility
programs needed for reproducing the executable from
it. However, as a special exception, the materials to be
distributed need not include anything that is normally
distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless
that component itself accompanies the executable.
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that do
not normally accompany the operating system. Such a
contradiction means you cannot use both them and the
Library together in an executable that you distribute.
7. You may place library facilities that are a work based
on the Library side-by-side in a single library together
with other library facilities not covered by this License,
and distribute such a combined library, provided that
the separate distribution of the work based on the
Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of
the same work based on the Library, uncombined
with any other library facilities. This must be
distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of
the fact that part of it is a work based on the
Library, and explaining where to find the
accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided
under this License. Any attempt otherwise to copy,
modify, sublicense, link with, or distribute the Library is
void, and will automatically terminate your rights under
this License. However, parties who have received
copies, or rights, from you under this License will not
have their licenses terminated so long as such parties
remain in full compliance.
9. You are not required to accept this License, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying
or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to
do so, and all its terms and conditions for copying,
distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work
based on the Library), the recipient automatically
receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to
these terms and conditions. You may not impose any
further restrictions on the recipients’ exercise of the
rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or
allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If
you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other
pertinent obligations, then as a consequence you may
not distribute the Library at all. For example, if a patent
license would not permit royalty free redistribution of the
Library by all those who receive copies directly or
indirectly through you, then the only way you could
satisfy both it and this License would be to refrain
entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the
section is intended to apply, and the section as a whole is
intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or to
contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software
distribution system which is implemented by public license
practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application
of that system; it is up to the author/donor to decide if he
or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who
places the Library under this License may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case,
this License incorporates the limitation as if written in
the body of this License.
13. The Free Software Foundation may publish revised
and/or new versions of the Lesser General Public
License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If
the Library specifies a version number of this License
which applies to it and “any later version”, you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation. If the Library does not specify a
license version number, you may choose any version
ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into
other free programs whose distribution conditions are
incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this.
Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of
software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE LIBRARY
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE LIBRARY
IS WITH YOU. SHOULD THE LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY
APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY
WHO MAY MODIFY AND/OR REDISTRIBUTE THE
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY
TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO
OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want it to be of the
greatest possible use to the public, we recommend
making it free software that everyone can redistribute
and change. You can do so by permitting redistribution
under these terms (or, alternatively, under the terms of
the ordinary General Public License).
To apply these terms, attach the following notices to the
library. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of
warranty; and each file should have at least the
“copyright” line and a pointer to where the full notice is
found. one line to give the library’s name and an idea of
what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/
or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your
option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser
General Public License for more details.
You should have received a copy of the GNU Lesser
General Public License along with this library; if not,
write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA Also
add information on how to contact you by electronic
and paper mail.
You should also get your employer (if you work as a
programmer) or your school, if any, to sign a “copyright
disclaimer” for the library, if necessary. Here is a
sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in
the library ‘Frob’ (a library for tweaking knobs) written by
James Random Hacker.
signature of Ty Coon, 1 April 1990 Ty Coon, President
of Vice.
OpenSSL LICENSE
Copyright (c) 1998-2006 The OpenSSL Project. All
rights reserved. Redistribution and use in source and
binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of
this software must display the following
acknowledgment: “This product includes software
developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL
Project” must not be used to endorse or promote
products derived from this software without prior written
permission. For written permission, please contact
openssl-core@openssl.org.
5. Products derived from this software may not be
called “OpenSSL” nor may “OpenSSL” appear in their
names without prior written permission of the OpenSSL
Project.
6. Redistributions of any form whatsoever must retain
the following acknowledgment: “This product includes
software developed by the OpenSSL Project for use in
the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL
PROJECT ‘‘AS IS’’ AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.This product includes
cryptographic software written by Eric Young (eay@
cryptsoft.com). This product includes software written
by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.
com) All rights reserved. This package is an SSL
implementation written by Eric Young (eay@cryptsoft.
com). The implementation was written so as to conform
with Netscapes SSL. This library is free for commercial
and non-commercial use as long as the following
conditions are aheared to. The following conditions
apply to all code found in this distribution, be it the RC4,
RSA, lhash, DES, etc., code; not just the SSL code.
The SSL documentation included with this distribution is
covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any
Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should
be given attribution as the author of the parts of the
library used. This can be in the form of a textual
message at program startup or in documentation
(online or textual) provided with the package.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
3. All advertising materials mentioning features or use of
this software must display the following
acknowledgement: “This product includes
cryptographic software written by Eric Young (eay@
cryptsoft.com)” The word ‘cryptographic’ can be left out
if the rouines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or a
derivative thereof) from the apps directory (application
code) you must include an acknowledgement: “This
product includes software written by Tim Hudson (tjh@
cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘‘AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.The licence and distribution terms
for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply
be copied and put under another distribution licence
[including the GNU Public Licence.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery
return system.
8 Channel/
16 Channel DVR
User Manual
Copyright
©2011 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this
document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of
Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
• Data loss due to a damaged hard disk
• If the system behaves abnormally because you run a program irrelevant to the system operation.
• Data loss due to virus infection
• Deteriorated performance or natural worn-out in process of time
• Sensory phenomenon that does not affect the performance or quality of the product (ex: working noise).
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920
Fax : +1-201-373-0124
www.samsungcctvusa.com
www.samsungtechwin.com
www.samsungsecurity.com
www.samsungipolis.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising