FC 6020 F Front Plate

FC 6020 F Front Plate
DIS Digital Conference Systems
FC 6020 F Front Plate
FC 6020 F Front Plate
• Front plate for chairman conference unit
• Flush-mounted installation
• Loudspeaker
• Delegate-off button
The FC 6020 F front plate unit is a flush mounted unit designed to be used in combination with the MU 6040 C microphone unit. The unit is especially suited for installations where the flush mounted unit must take up minimal space with minimum
components. The remaining components are fitted into the MU that can be mounted
in a more spacious location.
The FC 6020 F has the following standard features:
The flush mounted unit features a built-in loudspeaker that distributes the floor channel. The loudspeaker automatically mutes when the microphone is turned on.
The unit also features a microphone and a delegates off button. The microphone
button enables the user to activate/deactivate the microphone. The delegates off
button enables the user to turn off all active delegate microphones.
The FC 6020 F can be used in combination with the gooseneck microphones GM
652x or the boundary microphone BM 6620.
The gooseneck microphones GM 652x can be locked to the unit with a 2 mm hex
key. The lock is accessible from the small hole above the XLR socket. Turn the
hex key clockwise to enable the lock and insert the gooseneck microphone into the
XLR socket. Turn the hex key counter clockwise to disable the lock and remove the
gooseneck microphone.
The boundary microphone BM 6620 can be retrofitted by replacing the XLR insert
in the plastic adaptor with the boundary microphone. The molex mini-connector fits
with the microphone connector on the PCB.
The FC 6020 F can be combined with any conference units from the DCS 6000
Digital Conference System.
• Standard conference unit for chairmen
• Fully digital audio transmission
• Daisy chain topology with loop-through connections or star
topology using junction boxes
• CAT 5e (or higher) F/UTP or U/FTP cabling
• Maximum 3800 conference units per system
• Support for four microphone operation modes; Automatic,
FIFO, Manual and VOX (voice activation)
• Support for three microphone interrupt ability modes enabling
'ping pong' mode
• Auto off of microphones
• Lockable XLR gooseneck microphone connector
• A high-quality loudspeaker
• Microphone and delegate off buttons with LED indicators
• Single cable connection to the MU 6040 C
How To Order
Chairman front plate with loudspeaker. Requires
MU 6040 C.
Frequency range
150 Hz-15 kHz
Power maximum
3.0 W RMS
MU 6040 C 1 m integrated cable
Connector type
Microphone connection
HD 15P
3-pin female XLR
Dimensions (H x W x D) 90 x 160 x 30 mm
Cut out dimensions (H x W)
200 g
Temperature range
75 x 140 mm (important: corner
radius maximum R3.0)
Anodized aluminium
5° to 40° C
The DCS 6000 system conforms to standard IEC 60914.
Chairman mic unit for use with HM 4042 or FD
front panel
FC 6020 F
MU 6040 C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF