10/100Base TX to 100Base FX Media Converter

10/100Base TX to 100Base FX Media Converter
10/100Base TX to 100Base FX Media Converter
General Description
The media converter transforms the transmission media of Ethernet signal from CAT5 to optical
fiber. it can extend the transmission distance to several kilometers or hundred kilometers.
Using media converter is an economical solution to achieve long distance transmission based on
current status.
Key Features
In conformity to IEEE 802.3 10 Base-T standard.
In conformity to IEEE 802.3u 100 Base-TX/FX standard.
Store and forward switching
Support CSMA/CD Protocol.
Built in 128Kb RAM for data buffer.
Back pressure flow control for full duplex, IEEE802.3 X and half duplex.
Automatic identification of MDI/MDI-X cross line.
inform us ahead).
Supports link fault pass through function.
Supports far end fault function.
Power from external power adapter or USB port.
Fiber connector: Choice from SC, ST, FC or LC connector for multimode and single mode.
DIP Switch to set configurations.
Built in a watchdog timer to monitor internal switch error.
LED display for link/activity, full/half,10M/100M.
Transmission distance can reach 2km for multimode and 120KM for single mode.
Can be rack mounted in 14 slots chassis(external Power supply).
Support 4KV surge protection(external power supply, Optional).
1/6
10/100Base TX to 100Base Fx
Media Converter
Forward 1600 bytes packets for management. Can also reach 9k bytes(optional, Must
2/6
10/100Base TX to 100Base Fx
Media Converter
10/100M media converter(External PSU)
External Product Structure
Cable
Operation Mode
Connector
Power Supply
Data Buffer
Environmental
temperature
Transfer Fiber
Relative Humidity
Size
10/100M Multimode
10/100M Single
Media converter
Media converter
MM fiber/twist pair
SM fiber/twist pair
full duplex mode or half duplex mode
One UTP RJ-45connector,one SC/ST/FC or one LC connector
outside: 5V DC 1A built-in: 110-265V AC or 48V DC or 12V
DC(optional)
128Kb
0~60 degrees
Multi-mode: 50/125, 62.5/125 or 100/140μm
Single-mode:: 8.3/125, 8.7/125, 9/125 or 10/125μm
5%-90%
94mm x 71mm x 26mm (Power external type)
160mm x 129mm x 33mm(Power internal type)
3/6
10/100Base TX to 100Base Fx
Media Converter
Technical Parameter
LED indicator lamps
LED indicator
lamp
Status
On
FX Link/Act
Explanation
Connection status display for fiber link.
“ON” indicates that Fiber link is in correct connection.
DUP
On
Off
Active status display of fiber link
“Blink” indicates packet goes through Fx end.
Connection status display for electric link.
“ON” indicates that electric link is in correct connection.
Active status display of electric link
“Blink” indicates packet goes through Tx end.
Transceiver works in the full duplex mode.
Transceiver works in the half duplex mode.
PWR
On
Power is on and normal.
SD
On
Fiber signal is detected.
100
On
Off
Transfer rate of electric interface is 100Mbps.
Rate of electric interface is 10Mbps
Blink
On
TP Link/Act
Blink
Wavelength(nm)
Transmitting
optical
power
(dBm)
Receiving
sensitivity(dBm)
Transmission
distance(km)
Loss
allowed(dBm)
ST/SC/FC
1310
-14 ~ -9
-34
2
10
SM
ST/SC/FC
1310
-13 ~ -4
-34
20
19
SM
SM
SC
1310
-8 ~ -3
-35
40
27
SC
1310
-5 ~ 0
-36
60
34
SM
SC
1550
-5 ~ 0
-36
80
27
SM
SC
1550
-5 ~ 0
-36
100
31
SM
SC
1550
-2 ~ 3
-37
120
35
Receiving
sensitivity(dBm)
Transmission
distance(km)
Loss
allowed(dBm)
Standard
loss:1310nm
0.4/km
1550nm
Dual
fiber
Interface
MM
Single
fiber
Interface
Wavelength(nm)
Transmitting
optical
power
(dBm)
SM
SC
1310/1550
-12 ~ -3
-35
20
SM
SC
1310/1550
-8 ~ -3
-35
30
SM
SC
1310/1550
-5 ~ 0
-36
40~60
4/6
10/100Base TX to 100Base Fx
Media Converter
Transmission characteristics of single and dual fiber transceiver
SM
SC
1310/1550
-36
-3 ~ 3
60~80
0.25/km
DIP function(only for external power supply):
DIP1:"ON" enable LFP alarm function, "OFF" disable LFP function;
DIP2:"ON" force TX port work under 10M,"OFF" force TX port work under auto negotiation;
DIP3:"ON" force TX port work under 10M,"OFF" force TX port work under 100M;
DIP4:"ON" force TX port work under Half Duplex, "OFF" force TX port work under Full
Duplex.
DIP function(only for card type, internal power supply):
DIP1:"ON" enable LFP alarm function, "OFF" disable LFP function;
DIP2:"ON" force TX port work, "OFF" force TX port work under auto negotiation;
DIP3:"ON" force TX port work under 10M,"OFF" force TX port work under 100M;
DIP4:"ON" force TX port work under Half Duplex, "OFF" force TX port work under Full
Duplex;
DIP5:"ON" force fiber port work under Half Duplex, "OFF" force fiber port work under Full
Duplex;
DIP6:"ON" fiber port and TX port are not compliance to IEEE802.3X protocol, "OFF" fiber
port and TX port are not compliance to IEEE802.3X protocol.
10/100Base TX to 100Base Fx
Media Converter
DIP7 and DIP8:
Both are "OFF", work under the storage and forward exchange mode(default mode);
DIP7“ON” and DIP8 OFF”, work under the improved quick exchange mode;
DIP7 "OFF" and DIP8 "ON", work under converter mode, no date storage, TX must be forced
to be 100M;
Both are "ON", work under converter mode, automatically convert to forward mode when the
speed of optical ports and TX port.
Ordering Information
Product
10/100M Media Converter(Telecom
Network Products, 220V power
outside, standalone, suitable to 2U 14
slots rack mount media converter)
Description
Unit
Dual fiber, multi-mode, 2KM, 1310nm
set
Dual fiber, single-mode, 20KM, 1310nm
set
Dual fiber, single-mode, 40KM, 1310nm
set
Dual fiber, single-mode, 60KM, 1310nm
set
Dual fiber, single-mode, 80KM, 1550nm
set
Dual fiber, single-mode, 100KM, 1550nm
set
5/6
Dual fiber, single-mode, 120KM, 1550nm
set
Single fiber, 20km, 1310nm/1550nm
pair
Single fiber, 40km, 1310nm/1550nm
pair
Single fiber, 60km, 1310nm/1550nm
pair
Single fiber, 80km, 1310nm/1550nm
pair
Single fiber, 100km, 1310nm/1550nm
Single fiber, 120km, 1310nm/1550nm
pair
pair
Volume,Box Volume and Weight info
10-100Base TX Media Converter (Built-in power supply)Volume
Product Name
Type
Length
Width
Height
Volume
10-100Base TX Media Converter
AK-C100
160mm
129mm
33mm
681120mm³
10-100Base TX Media Converter(Built-in power supply) Box Volume
Product Name
10-100Base TX Media Converter
Type
AK-C100
Length
276mm
Width
160mm
Height
65mm
Volume
2870400mm³
10-100Base TX Media Converter (Built-in power supply)Weight
Product Name
10-100Base TX Media Converter
Type
AK-C100
Weight
0.56kg
Each Net Weight
0.44kg
Product Name
Type
Length
Width
Height
Volume
10-100Base TX Media Converter
AK-C100
94mm
71mm
26mm
173524 mm³
10-100Base TX Media Converter (External power supply) Box Volume
Product Name
10-100Base TX Media Converter
Type
AK-C100
Length
240mm
Width
126mm
Height
53mm
Volume
1602720 mm³
10-100Base TX Media Converter (External power supply)Weight
Product Name
10-100Base TX Media Converter
Type
AK-C100
Weight
0.40kg
Application Diagram
6/6
Each Net Weight
0.26kg
10/100Base TX to 100Base Fx
Media Converter
10-100Base TX Media Converter (External power supply)Volume
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising