Service Tool Instruction

Service Tool Instruction
Service Tool Instruction
Description
INLINE™ 6 Data Link Adapter Kit
Part Number
Date
2892092
Bulletin Number
15-Aug-2012
3400419-2
This document provides information for the INLINE™ 6 Data Link Adapter Kit, Part Number 2892092, and the
associated cables to connect a personal computer to the data link adapter. The INLINE™ 6 data link adapter is
designed for use with the SAE J1708 and J1939 standard protocols. The INLINE™ 6 data link adapter is used with
software applications such as INSITE™ Electronic Service Tool 7.5 and later versions. The INLINE™ 6 supports all
Cummins Inc. electronic engines.
Item
Number
1
2
3
4
5
6
7
8
9
Table 1, INLINE™ 6 Data Link Adapter Kit, Part Number 2892092
Part Number Description
2892093
2892176
3163096
3163597
4919780
4918713
2892095
2892096
3165141
INLINE™ 6 data link adapter
USB cable, (4.3 m [14 feet])
J1939 backbone adapter
J1939 gender change adapter
Data link cable (DB25F 9-Pin Deutsch™ connector)
Storage case
INLINE™ 6 software compact disc
INLINE™ 6 ruggedized protective boot
DB25F/2-pin Weather-Pack™/2-pin Weather-Pack™/3-pin Deutsch™
cable
Cummins Inc., Box 3005, Columbus, Indiana 47202-3005
Cummins Ltd., Daventry, Northants, England NN11 8NU
Registered Office: 49 - 51 Gresham Road, Staines, Middlesex TW18 2BD, England
Registered No. 573951 England
Copyright©
Cummins Inc.
All rights reserved
Quantity
1
1
1
1
1
1
1
1
1
Page 1 of 3
Page 2
3400419-2
Table 2, Items Used with INLINE™ 6 Data Link Adapter Kit, Part Number 2892092, Purchased Separately
Item
Part Number Description
Quantity
Number
Not Shown
4919797
DB25F/3-pin Deutsch™/3-pin Deutsch™/2-pin Weather-Pack™ cable
1
Not Shown
3824440
DB25F 8-Pin AMP™ connector
1
Not Shown
4918418
DB9F-DB9M serial cable
1
Not Shown
3165160
DB25F/6-pin Deutsch™ cable
1
NOTE: A fully populated USB cable, Part Number 2892176, or DB9F-DB9M, serial cable, Part Number 4918418,
must be used.
Connect the DB9F-DB9M serial cable, Part Number 4918418, or the USB cable, Part Number 2892176 to the RS-232
serial port or the USB port of the computer and to the INLINE™ 6 data link adapter, Part Number 2892093.
The INLINE™ 6 data link adapter requires +8-VDC to +50-VDC at 250mA that can be supplied through the OEM
connector or by a separate power source.
Connect the appropriate data link cable to the INLINE™ 6 data link adapter, Part Number 2892093.
With the data link cable connected to the INLINE™ 6 data link adapter, connect the other end of the data link cable to
the vehicle cab or engine compartment data link connector.
Launch the electronic service tool application software.
The following are the INLINE™ 6 Adapter Indicator Lamp Functions:
Power Lamp
•
When the power lamp is lighted green continuously, this means DC power is being supplied to the adapter at the
proper voltage level. The INLINE™ 6 adapter requires +8-VDC to +50-VDC at 250 mA that can be supplied
through the OEM connector or by a separate power source.
•
When the power lamp is lighted red continuously, this means that either the INLINE™ 6 adapter is receiving a low
power supply voltage (less than 8-VDC) or is only receiving power from the USB port.
•
When the power lamp is off, this means that the INLINE™ 6 is receiving no power.
CAN 1 Port Lamp
•
A CAN 1 red flashing lamp indicates that the INLINE™ 6 adapter is physically connected to a CAN data link.
However, it is not communicating with an ECM on the CAN data link. A CAN 1 green flashing lamp indicates that
the INLINE™ 6 adapter is communicating with an ECM on the CAN data link.
3400419-2
Page 3
CAN 2 Port Lamp
•
A CAN 2 red flashing lamp indicates that the INLINE™ 6 adapter is physically connected to a CAN data link.
However, it is not communicating with an ECM on the CAN data link. A CAN 2 green flashing lamp indicates that
the INLINE™ 6 adapter is communicating with an ECM on the CAN data link.
J1708 Port Lamp
•
A J1708 red flashing lamp indicates that the INLINE™ 6 adapter is physically connected to a J1708 data link.
However, it is not communicating with an ECM on the J1708 data link. A J1708 green flashing lamp indicates that
the INLINE™ 6 adapter is communicating with an ECM on the J1708 data link.
RS-232 Port Lamp
•
An RS-232 green flashing lamp indicates that the INLINE™ 6 adapter is connected to an active RS-232 port and
exchanging communications. An RS-232 lamp in the OFF state indicates that the INLINE™ 6 adapter is not
communicating over the RS-232 port.
USB Port Lamp
•
A USB green flashing lamp indicates that the INLINE™ 6 adapter is connected to an active USB port and is
exchanging communications. A USB lamp in the OFF state indicates that the INLINE™ 6 adapter is not
communicating over the USB port.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising