HDMI to HD-SDI Media Converter
Connection example
HDMI to HD-SDI
Media Converter
Security /HDMI Extension
Power
adaptor
Power
input
HD-SDI DVR
Operation Manual
X702
Coaxial
Cable
HDMI to
SDI
Converter
SDI
Output
SDI
SDI to
to
HDMI
HDMI
Converter
Converter
HDMI output
HDMI
Camera
TV/
TV/
LCD
LCD
Multiple Monitor & broadcast application
SDI input
DVD/DVBT
HDMI output
SDI
loop-out
HDMI to
SDI
Converte
r
SDI input
SDI
loop-out
Coaxial Cable
Up to 100 meter
Technical specifications are subject to change without prior notice.
Brand and trade marks mentioned in this document belong to their
respective owner.
Precaution
•
•
•
•
This device is designed to be used indoor only.
Do not use power supply other than specified.
Do not attempt to open the enclosure, as this will
void the warranty.
In case of failure please contact authorized service
personnel for further information.
Packing
•
•
•
*The power adaptor included may contain different power plug required for your
country. Contact your local dealer for further information.
Interface
HD-SDI
Signal
Output 2
SDI OUT
DC 12V IN
STATUS
HDMI IN
Status LED
TV/
TV/
LCD
LCD
SDI
SDI to
to
HDMI
HDMI
Converter
Converter
TV/
TV/
LCD
LCD
Extension to other
TV/Monitor via SDI-HDMI
converter
Note: Power adaptors are required to operate the HDMI-to-SDI converter. All devices illustrated, except
the HDMI-to-SDI Converter, are optional and to be purchased separately.
Specification
INPUT
HDMI 1.3
Output
2 x HD-SDI (SPMTE-292M/296M), BNC-type.
Supported
Resolution
720P at 50/59.94/60Hz, 1080i at
50/59.94/60 Hz, 1080P at 2 5 Hz
Power
12V DC, 200 mA
Dimension
110(L)x96(W)x26(H)mm, 200g
Temperature
Operating: 0˚ to 40 ˚C / 32 ˚ to 104 ˚F
Storage: -20˚ to 70 ˚C / -4˚ to 158 ˚F
FAQ
1 x HDMI to HD-SDI Converter
1 x AC 110/220 V to DC 12 V power adaptor *
1 x Operation manual
HD-SDI
Signal
Output 1
SDI
SDI to
to
HDMI
HDMI
Converter
Converter
DC 12V
power
input. 200
mA
Status
Indicator
HDMI
Signal
Input
ON: Signal source connected
OFF: Signal source not connected or
accepted
• The Status LED is OFF while connected to power
The Status LED indicates only when input signal source is connected
and accepted.
• No HDMI signal output
Make sure the power cable, HD-SDI input and HDMI cable is connected
properly, and the input signal is HD or FULL-HD compliant.
• No HDMI output when co-operating with HDMI to SDI converter.
The HD-SDI standard supports only HD (720P) or Full-HD (1080P)
resolution. PC monitor resolutions, such as XGA,SXGA etc. are not
supported.
• Status LED is ON but no image displayed on TV or monitor
Your display device (TV or Monitor) may not support the input video
source, e.g. 720P at 30Hz, or 1080P at 30Hz. Check the operating
manual of your display device or the signal format connected to
HD-SDI input.
• How long can the HD-SDI signal be transmitted?
Theoretically, the HD-SDI signal can be transmitted over 100 meters.
The real transmission distance depends on quality of coaxial cable
used, and connectivity of BNC connectors.
Part No.: R-FG00-PACK-MANUAL-003. V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising