GM-HU34 USB 3.0 4-Port Hub with DIN-Rail and
GM-HU34 Industrial USB 3.0 Rugged 4-Port Hub with DIN-Rail and Mounting Brackets
The GM-HU34 Hub is a USB 3.0 specification compliant with up to 5Gbps data
transfer speeds depending systems usage. The hub construction is industrialgrade metal with two available mounting options (1) DIN-Rail mount secured
to the back panel of the hub and (2) Mounting brackets on either end of the
hub secured by 4 screws for each bracket.
Included with the GM-HU34 has a built-in female 3-wire terminal block
connector allowing for additional power, also is manufactured with a 9-24V
power receptacle for an additional power supply to be used with higher
power consumption devices, power supply is not included with this unit. This
USB 3.0 hub is compact.
The GM-HU34 Hub works with 4 Type-A female upstream ports and 1 Type-B downstream port from your computer to
the device’s hub. This specification specifies electrical, physical, mechanical features and etc external environment
requirements to this industrial USB 3.0 4-Port hub
Features and Highlights
Industrial grade rugged metal enclosure design
Redundant 9VDC to 24VDC power input
15KV ESD USB interface protection
Power input surge protection (600W) for each port
Over-current detection and protection circuit design
Wall and DIN rail mount support
Supports UASP function (with Windows 8 native
USB 3.0 Host driver only)
4-Port Industrial USB 3.0 Hub with built-in 15KV
ESD Protection;
Over-current detection and protection circuit
Supports 600W power input surge protection on
each port;
Wall and DIN rail-mount supported;
Environmental Specifications
Operating Temperature
0°C - 40°C
Storage Temperature
-20°C ~ 50°C
Operating Humidity
5% - 85%
Storage Humidity
5% - 95%
Operating Altitude
-1000 to 10000 FT.
70 – 106Mpa
Chipset: VIA VL811+
Supports UASP function (with Windows 8 native USB 3.0 Host driver only)
Compliant with Universal Serial Bus 3.0 Specification
Maximum data transfer rate: 5Gbps
Surge Protection: 600W (max)
Metal housing with mounting mechanism
a. Input: 1, 9-pin, USB 3.0, Type B, Female
b. Input: 1, Terminal block (3-Wire), Power
c. Input: 1, DC power adapter jack (power adapter not included)
d. Output: 4, 9-pin, USB 3.0, Type A, Female
Power requirements:
a. Input voltage: 9VDC~24VDC
b. Output current: 900mA per port (max)
Power consumption: 2.4W
LED Indicate Mode:
Solid Light Green Color
Blinking Green Color
Package Contents
USB 2.0 Cable
1 PC
DIN Rail
1 PC
Wall Mount Kit
1 Set
Screw Pack
1 Pack
Physical Specifications
Dimensions: 257.9 mm x 170.2 mm x 60.6 mm
Net Weight: 600g
Color: Black
No Light
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF