Untitled
86
V E N T I L AT I O N
S Y S T EM S
FRAME FANS
Air moving and spot
cooling
Standard frame fans - Costech ............................................................................. 88
––Products overview............................................................................................ 90
––AC axial fans ........................................................................................................ 92
––EC axial fans ..................................................................................................... 112
––DC axial fans ..................................................................................................... 113
––DC blowers ........................................................................................................ 137
EC Technology ................................................................................................................. 139
DC fans with signal lead .......................................................................................... 140
Special frame fans ........................................................................................................ 141
––IP55 AC fans ..................................................................................................... 142
––IP55 EC fans ..................................................................................................... 143
––IP55 DC fans ..................................................................................................... 144
––AC all metal fans ............................................................................................ 145
––AC high temperature resistant fans ................................................... 146
Accessories ....................................................................................................................... 147
87
Frame Fans Introduction
STANDARD FRAME FANS
Axial fans and blowers provide forced-air cooling solution to temperature-sensitive applications.
The large airflow and low noise axial fans are designed for ventilation and spot cooling of internal
machinery components, especially in areas with confined spaces. Blowers, on the other hands,
produce more concentrated airflow and are suitable to work with high impedance systems.
A variety of AC, DC and energy-efficiency EC fans in different sizes, air volumes and pressures
satisfies each industrial requirements.
MOTOR TYPE
AC shaded pole or capacitor, or
alternatively with brushless DC motor
ELECTRICAL CONNECTION
Wires or terminal
FAN DESIGN
With or without external casing
SUPPORT SYSTEM
Long life ball bearing or quiet operation
sleeve bearing
ENERGY EFFICIENCY
EC green technology for high
performance
DC SIGNALS
Alarm or speed sensor provided by a
separate wire
Details that make the difference
Frameless version
88
■
Fandis
Blower
Fan filter kit
Frame Fans Introduction
Model numbering system for Standard Frame fans
12
B
23
H
T
B
W 00
CASING SIZE
01 = 15x15 mm axial fan
20 = 20x20 mm axial fan
02 = 25x25 mm axial fan
03 = 30x30 mm axial fan
35 = 35x35 mm axial fan
04 = 40x40 mm axial fan
45 = 45x45 mm axial fan
50 = 50x50 mm axial fan
06 = 60x60 mm axial fan
07 = 70x70 mm axial fan
08 = 80x80 mm axial fan
09 = 92x92 mm axial fan
12 = 120x120 mm axial fan
13 = 127x127 mm axial fan
17 = 172x150 mm axial fan
18 = ø 172 mm axial fan
22 = 218x218 mm axial fan
25 = 280x280 mm axial fan
C1 = 120x120 mm blower
C6 = 75x75 mm blower
CASING THICKNESS
N = 6.5 mm
E = 10 mm
F = 15 mm
D = 20 mm
A = 25 mm
G = 30-32 mm
B = 38 mm standard flow
R = 38 mm reverse flow
C = 50-52 mm
M = 55 mm
S = 83 mm
W = without casing, standard flow
Z = without casing, reverse flow
description
FRAME FANS
A
description
MOTOR TYPE
A = a.c. shaded pole motor
C = a.c. capacitor run induction motor
D = d.c. brushless
OPTIONS
00 = no option
A = alarm output
S = speed signal output
I = variable speed with integrated
V = variable speed with external termistor
M = digital PWM speed control
T = for high temperature ambient
F = motor IP55 protected
H = motor IP25 protected
Wnn = wires lenght out of standard
Qnn = special version
DESIGN
BEARING TYPE
B = shielded ball S = sleeve
CONNECTION
K = terminal block
T = flat terminals 110 series (2.8x0.5 mm)
W = lead wires
SPEED
E = extra low
M = medium
V = very low
H = high
RATED VOLTAGE
01 = 5 V d.c.
04 = 12 V d.c.
05 = 24 V d.c. / V a.c.
07 = 48 V d.c.
L = low
S = super high
12 = 115 V a.c.
23 = 230 V a.c.
40 = 400 V a.c. 3-phase
Model numbering system for Standard Frame fans (NEW)
A 12 B 23 H T B A 5 0 - R F T 0 - Wxx
description
FAN TYPE
A = axial shaded pole
B = blower d.c. brushless
C = axial a.c. capacitor run induction motor
D = axial d.c. brushless
E = axial EC fan
J = blower a.c. capacitor run induction motor
P = chip cooler d.c. brushless
R = blower a.c.
CASING SIZE
01 = 15x15 mm
20 = 20x20 mm
02 = 25x25 mm
03 = 30x30 mm
35 = 35x35 mm
04 = 40x40 mm
45 = 45x45 mm
50 = 50x50 mm
06 = 60x60 mm
07 = 70x70 mm
75 = 75x75 mm
08 = 80x80 mm
09 = 92x92 mm
97 = 97x97 or 97x94 mm (blower)
12 = 120x120 mm
13 = 127x127 mm
17 = 172x150 mm
18 = ø 172 mm
22 = 218x218 mm
25 = 280x280 mm
CASING THICKNESS
N = 6.5 mm
G = 30-32 mm
E = 10 mm
B = 38 mm
F = 15 mm
C = 50-52 mm
D = 20 mm
M = 55 mm
A = 25 mm
S = 83 mm
J = 28 mm
RATED VOLTAGE
01 = 5 V d.c.
04 = 12 V d.c.
05 = 24 V d.c. / V a.c.
07 = 48 V d.c.
SPEED
E = extra low
M = medium
U = ultra high
12 = 115 V a.c.
23 = 230 V a.c.
30 = 115-230 V a.c.
40 = 400 V a.c. 3-phase
V = very low
H = high
I = hyper high
CONNECTION
K = terminal block
T = flat terminal
W = wires
BEARING TYPE
B = ball S = sleeve
L = low
S = super high
description
CUSTOMIZATION
Wxx = wire lenght not standard
Qxx = special version
FREE PROGRESSIVE DIGIT
( ) = standard
0-9 = progressive
HIGH TEMPERATURE
( ) = standard temperature
T = high temperature
IP PROTECTION
( ) = IP20
F = IP55 coated
P = IP55 parylene
G = IP58
AIR FLOW DIRECTION
( ) = standard flow with casing
R = reverse flow with casing
W = standard flow without casing
Z = reverse flow without casing
OPTIONS
0 = by impedance
1 = by IC
2 = by IC with alarm (RD)
3 = by IC with speed sensor (FG)
4 = by IC variable speed sensor (VS)
6 = by transistor with speed sensor (FG)
7 = two speed
8 = VS + FG
9 = PWM control
A = VS + RD
B = PWM + FG
C = RD + FG
D = thermally protected
F = PWM + RD
BLADES NUMBER
5=5
C = 15
7=7
D = 17
9=9
E = 19
A = 11
F = 21
B = 13
0 = blower blade shape
DESIGN
Fandis
■
89
Frame Fans Introduction
PRODUCTS OVERVIEW
Model
Dimensions
Voltage
Rated Power
Air Flow
Noise
mm
V
W
m3/h
dB(A)
Page
AC AXIAL FANS
A06GF
60x60x30
115/230 Va.c.
4÷5
14 ÷ 17
27 ÷ 28
92
A08AF
80x80x25
115/230 Va.c.
11 ÷ 16
36 ÷ 41
32 ÷ 35
93
A08BF
80x80x38
115/230 Va.c.
9 ÷ 14
33 ÷ 41
28 ÷ 36
94
A09AF
92x92x25
115/230 Va.c.
11 ÷ 16
39 ÷ 68
28 ÷ 36
95
A12AF
120x120x25
115/230 Va.c.
11 ÷ 16
87 ÷ 117
33 ÷ 42
96
A12BW
120x120x38
24/115/230 Va.c.
6 ÷ 24
83 ÷ 199
28 ÷ 50
97
A12RW
120x120x38
230 Va.c.
19 ÷ 20
150 ÷ 167
48 ÷ 54
99
ø 113x38
115/230V a.c.
18 ÷ 22
148 ÷ 182
43 ÷ 50
100
A13BF
127x127x38
115/230V a.c.
15 ÷ 17
178 ÷ 204
46 ÷ 50
101
A17CF
172x150x51
115/230V a.c.
28 ÷ 35
290 ÷ 331
50 ÷ 55
102
C17BF
172x150x38
115/230V a.c.
26 ÷ 29
300 ÷ 360
54 ÷ 58
103
C17CF
172x150x51
115/230V a.c.
29 ÷ 31
348 ÷ 384
53 ÷ 58
104
C18CF
ø 172x51
115/230V a.c.
29 ÷ 31
348 ÷ 384
50 ÷ 55
105
C22SD
218x218x83
115/230V/400 Va.c.
78 ÷ 174
855 ÷ 970
61 ÷ 67
106
C22SU
218x218x83
115/230V a.c.
68 ÷ 85
800 ÷ 937
35 ÷ 68
107
A12ZWW
C25SE
280x280x80
115/230/400 V a.c.
86 ÷ 138
1540 ÷ 1920
65 ÷ 79
108
C25SU
280x280x80
115/230V a.c.
130 ÷ 170
1450 ÷ 1835
68 ÷ 79
110
A12BA Q109
120x120x38
230 Va.c.
13 ÷ 14
110 ÷ 115
40 ÷ 41
111
E08BL
80x80x38
115/230V a.c.
5÷5
64 ÷ 73
35 ÷ 39
112
E12BL
120x120x38
230 Va.c.
2.5 ÷ 6
132 ÷ 206
34 ÷ 47
112
EC FANS
DC AXIAL FANS
90
■
Fandis
D20EA
20x20x10
5/12 Vd.c.
0.4 ÷ 0.8
1 ÷ 1.4
15 ÷ 26
113
D02EZ
25x25x10
5/12 Vd.c.
0.5 ÷ 1
3.6 ÷ 4.3
23 ÷ 29
114
D03EA
30x30x10
5/12 Vd.c.
0.6÷ 0.7
5 ÷ 6.4
20 ÷ 28
115
D04ET
40x40x10
5/12/24 Vd.c.
1 ÷ 2.2
8.5 ÷ 11
22 ÷ 26
116
D04FA
40x40x15
12 Vd.c.
1 ÷ 1.4
11 ÷ 15
27 ÷ 39
117
D04DZ
40x40x20
24 Vd.c.
2.2 ÷ 2.2
15 ÷ 15
36 ÷ 36
118
D45EA
45x45x10
5/12 Vd.c.
0.2 ÷ 1
12 ÷ 15
22 ÷ 27
119
D50EA
50x50x10
12 Vd.c.
1.2 ÷ 1.4
10 ÷ 15
20 ÷ 24
120
D50FA
50x50x15
12 Vd.c.
1 ÷ 2.4
19 ÷ 29
25 ÷ 34
121
D06ET
60x60x10
5/12 Vd.c.
0.8 ÷ 1.8
20 ÷ 24
29 ÷ 33
122
D06FA
60x60x15
5/12/24 Vd.c.
1.3 ÷ 2.2
24 ÷ 27
31 ÷ 35
123
D06DA
60x60x20
12/24 Vd.c.
1 ÷ 1.9
21 ÷ 28
24 ÷ 31
124
D06AA
60x60x25
12/24 Vd.c.
1 ÷ 4.2
22 ÷ 50
18 ÷ 40
125
D07AA
70x70x25
12/24 Vd.c.
1.9 ÷ 3.1
55 ÷ 61
32 ÷ 36
126
D08FA
80x80x15
5/12/24 Vd.c.
0.4 ÷ 3.1
37 ÷ 51
26 ÷ 31
127
D08DA
80x80x20
12/24 Vd.c.
1.9 ÷ 3.6
40 ÷ 49
27 ÷ 35
128
D08AA
80x80x25
24/48 Vd.c.
2.2 ÷ 6.2
40 ÷ 89
23 ÷ 41
129
D09DA
92x92x20
12/24 Vd.c.
1.9 ÷ 3.4
49 ÷ 56
29 ÷ 33
130
D09AZ
92x92x25
12/24 Vd.c.
1.1 ÷ 5
51 ÷ 105
19 ÷ 42
131
D09BZ
92x92x38
24 Vd.c.
13.2 ÷ 13.2
185 ÷ 185
53 ÷ 53
132
Frame Fans Introduction
PRODUCTS OVERVIEW
D12AZ
Dimensions
Voltage
Rated Power
Air Flow
Noise
mm
V
W
m3/h
dB(A)
120x120x25
12/24/48 Vd.c.
2.9 ÷ 6
122 ÷ 168
34 ÷ 43
Page
133
D12GA
120x120x32
24 Vd.c.
6÷6
190 ÷ 190
43 ÷ 43
134
D12BA9
120x120x38
24 Vd.c.
7 ÷ 24
220 ÷ 340
49 ÷ 61
135
D17CA
172x150x51
24/48 Vd.c.
24 ÷ 24
450 ÷ 450
59 ÷ 60
136
DC6GA
75x75x30
12/24 Vd.c.
2.4 ÷ 3.6
13 ÷ 18
35 ÷ 39
137
DC1GA
120x120x31
24 Vd.c.
9.4 ÷ 9.4
48 ÷ 48
49 ÷ 49
138
60x60x30
230 Va.c.
4÷5
14 ÷ 17
27 ÷ 28
142
FRAME FANS
Model
SPECIAL FANS
A06 IP55
A08 IP55
80x80x38
115/230 Va.c.
12 ÷ 14
41 ÷ 51
32 ÷ 36
142
A09 IP55
92x92x25
230 Va.c.
14 ÷ 16
56 ÷ 68
32 ÷ 36
142
A12 IP55
120x120x38
115/230 Va.c.
5.5 ÷ 20
78 ÷ 182
27 ÷ 49
142
ø113x38
230 Va.c.
18 ÷ 22
140 ÷ 200
42 ÷ 50
142
A12W/Z IP55
A17 IP55
172x150x55
115/230 Va.c.
42 ÷ 42
332 ÷ 391
49 ÷ 53
142
E12BL IP55
120x120x38
230 Va.c.
6÷7
190 ÷ 200
45 ÷ 47
143
D04D IP55
40x40x20
24 Vd.c.
2.2 ÷ 2.2
15 ÷ 15
36 ÷ 36
144
D04E IP55
40x40x10
24 Vd.c.
1.9 ÷ 1.9
8.5 ÷ 8.5
22 ÷ 22
144
D06 IP55
60x60x25
12/24 Vd.c.
0.96 ÷ 3.8
24 ÷ 36
18 ÷ 38
144
D07 IP55
70x70x25
12 Vd.c.
2.3 ÷ 2.3
61 ÷ 61
36 ÷ 36
144
D08 IP55
80x80x25
12/24 Vd.c.
1.4 ÷ 6.2
44 ÷ 87
23 ÷ 41
144
D09 IP55
92x92x25
24 Vd.c.
3.6 ÷ 3.6
95 ÷ 95
38 ÷ 38
144
D12A IP55
120x120x25
24 Vd.c.
4.6 ÷ 4.6
150 ÷ 150
39 ÷ 39
144
D12B IP55
120x120x38
12/24/48 Vd.c.
6 ÷ 9.6
179 ÷ 179
47 ÷ 47
144
92x92x38
115/230 Va.c.
11 ÷ 12
75 ÷ 87
37 ÷ 42
145
A09BM
A12BM
120x120x38
115/230 Va.c.
15 ÷ 17
107 ÷ 175
33 ÷ 46
145
A17MM
172x150x55
115/230 Va.c.
42 ÷ 42
332 ÷ 391
49 ÷ 53
145
A17TM
172x150x55
115/230 Va.c.
45 ÷ 45
383 ÷ 434
58 ÷ 61
145
92x92x38
115/230 Va.c.
11 ÷ 12
75 ÷ 87
37 ÷ 42
146
A09BMT
A12BMT
120x120x38
115/230 Va.c.
15 ÷ 17
110 ÷ 175
33 ÷ 46
146
A17MMT
172x150x55
115/230 Va.c.
42 ÷ 42
332 ÷ 391
49 ÷ 53
146
A17TMT
172x150x55
115/230 Va.c.
45 ÷ 45
383 ÷ 434
58 ÷ 61
146
Fandis
■
91
A06GF
Standard fans - Costech
60x60x30mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
A06G12HWBF00
60x60x30
50
Ball
115 V a.c.
50/60
5.0/4.0
14/17
18/27
27.0/28.0
2,200/2,800
CE; cURus;
A06G23HWBF00
60x60x30
50
Ball
230 V a.c.
50/60
5.0/4.0
14/17
17/27
27.0/28.0
2,400/3,000
CE; cURus;
Technical specifications
92
■
Fandis
Technical drawing
A08AF
Standard fans - Costech
80x80x25mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
A08A12HWBF00
80x80x25
71.5
Ball
115 V a.c.
50/60
14/11
36/41
40/55
32.0/35.0
2,600/3,100
CE; cURus;
A08A12HWSF00
80x80x25
71.5
Sleeve
115 V a.c.
50/60
14/11
36/41
40/55
32.0/35.0
2,600/3,100
CE; cURus;
A08A23HWBF00
80x80x25
71.5
Ball
230 V a.c.
50/60
16/14
36/41
40/55
32.0/35.0
2,600/3,100
CE; UR;
A08A23HWSF00
80x80x25
71.5
Sleeve
230 V a.c.
50/60
16/14
36/41
40/55
32.0/35.0
2,600/3,100
CE; UR;
Technical specifications
Technical drawing
Fandis
■
93
A08BF
Standard fans - Costech
80x80x38mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
V
Hz
W
m3/h
Pa
dB(A)
Rpm
14/12
41/51
40/55
32.0/36.0
2,500/3,000
CE; cURus;
Noise
Rated
Speed
Approvals
mm
mm
A08B12HWBF00
80x80x38
71.5
Ball
115 V a.c.
50/60
A08B12HWSF00
80x80x38
71.5
Sleeve
115 V a.c.
50/60
14/12
41/51
40/55
32.0/36.0
2,500/3,000
CE; cURus;
A08B12LWBF00
80x80x38
71.5
Ball
115 V a.c.
50/60
12/9.0
33/42
25/40
28.0/32.0
1,900/2,400
CE; cURus;
A08B12LWSF00
80x80x38
71.5
Sleeve
115 V a.c.
50/60
12/9.0
33/42
25/40
28.0/32.0
1,900/2,400
CE; cURus;
A08B23HWBF00
80x80x38
71.5
Ball
230 V a.c.
50/60
14/12
41/51
40/55
32.0/36.0
2,500/3,000
CE; UR;
A08B23HWSF00
80x80x38
71.5
Sleeve
230 V a.c.
50/60
14/12
41/51
40/55
32.0/36.0
2,500/3,000
CE; UR;
A08B23LWBF00
80x80x38
71.5
Ball
230 V a.c.
50/60
14/12
33/42
25/40
28.0/32.0
1,900/2,400
CE; UR;
A08B23LWSF00
80x80x38
71.5
Sleeve
230 V a.c.
50/60
14/12
33/42
25/40
28.0/32.0
1,900/2,400
CE; UR;
Technical specifications
94
■
Fandis
Technical drawing
A09AF
Standard fans - Costech
92x92x25mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
A09A12HTBF00
92x92x25
82.5
Ball
115 V a.c.
50/60
14/11
56/68
37/54
32.0/36.0
2,500/3,000
CE; cURus;
A09A12HTSF00
92x92x25
82.5
Sleeve
115 V a.c.
50/60
14/11
56/68
37/54
32.0/36.0
2,500/3,000
CE; cURus;
A09A23HTBF00
92x92x25
82.5
Ball
230 V a.c.
50/60
16/14
56/68
37/54
32.0/36.0
2,500/3,000
CE; UR;
A09A23HTSF00
92x92x25
82.5
Sleeve
230 V a.c.
50/60
16/14
56/68
37/54
32.0/36.0
2,500/3,000
CE; UR;
A09A23LTBF00
92x92x25
82.5
Ball
230 V a.c.
50/60
16/14
39/53
17/32
28.0/32.0
1,800/2,300
CE;
A09A23LTSF00
92x92x25
82.5
Sleeve
230 V a.c.
50/60
16/14
39/53
17/32
28.0/32.0
1,800/2,300
CE; cURus;
A09A23MTBF00
92x92x25
82.5
Ball
230 V a.c.
50/60
16/14
51/63
30/45
28.0/32.0
2,200/2,750
CE; UR;
A09A23MTSF00
92x92x25
82.5
Sleeve
230 V a.c.
50/60
16/14
51/63
30/45
28.0/32.0
2,200/2,750
CE; UR;
Technical specifications
Technical drawing
Fandis
■
95
A12AF
Standard fans - Costech
120x120x25mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
Pa
dB(A)
Rpm
A12A12HTBF00
120x120x25 104.8
Ball
115 V a.c.
50/60
14/11
99/117
42/40
38.0/42.0
2,400/2,900
CE; cURus;
A12A12HTSF00
120x120x25 104.8
Sleeve
115 V a.c.
50/60
14/11
99/117
42/40
38.0/42.0
2,400/2,900
CE; cURus;
A12A12MTBF00
120x120x25 104.8
Ball
115 V a.c.
50/60
14/11
87/105
27/32
33.0/35.0
2,050/2,500
CE; cURus;
A12A12MTSF00
120x120x25 104.8
Sleeve
115 V a.c.
50/60
14/11
87/105
27/32
33.0/35.0
2,050/2,500
CE; cURus;
A12A23HTBF00
120x120x25 104.8
Ball
230 V a.c.
50/60
16/14
109/127
52/52
38.0/42.0
2,400/2,900
CE; UR;
A12A23HTSF00
120x120x25 104.8
Sleeve
230 V a.c.
50/60
16/14
109/127
52/52
38.0/42.0
2,400/2,900
CE; UR;
A12A23MTBF00
120x120x25 104.8
Ball
230 V a.c.
50/60
16/14
87/102
27/32
34.0/36.0
2,000/2,400
CE; UR;
A12A23MTSF00
120x120x25 104.8
Sleeve
230 V a.c.
50/60
16/14
87/102
27/32
34.0/36.0
2,000/2,400
CE; UR;
Technical specifications
96
■
Fandis
Technical drawing
A12BW
Standard fans - Costech
120x120x38mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
• VDE Reg. No. A634
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
A12B05HTBW00
mm
120x120x38 104.8
Ball
Rated
Voltage
Freq.
Rated
power
Max air Static
flow
Pressure
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
24 V a.c.
50/60
14/14
154/165
62/77
46.0/49.0
2,650/2,850
Noise
Approvals
CE;
A12B05HTSW00
120x120x38 104.8
Sleeve
24 V a.c.
50/60 13.2/13.2 147/142
55/50
46.0/45.0
2,530/2,430
CE;
A12B12HTBW00
120x120x38 104.8
Ball
115 V a.c.
50/60
20/18
136/168
57/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
A12B12HTSW00
120x120x38 104.8
Sleeve
115 V a.c.
50/60
20/18
136/168
57/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
A12B12LTBW00
120x120x38 104.8
Ball
115 V a.c.
50/60
11/11
122/113
25/22
42.0/40.0
2,300/2,100
CE; cURus; VDE;
A12B12LTSW00
120x120x38 104.8
Sleeve
115 V a.c.
50/60
11/11
122/113
25/22
42.0/40.0
2,300/2,100
CE; cURus; VDE;
A12B12MTBW00
120x120x38 104.8
Ball
115 V a.c.
50/60
16/15
136/143
52/62
44.0/46.0
2,500/2,700
CE; cURus; VDE;
A12B12MTSW00
120x120x38 104.8
Sleeve
115 V a.c.
50/60
16/15
126/133
52/62
44.0/46.0
2,500/2,700
CE; cURus; VDE;
A12B12STBW00
120x120x38 104.8
Ball
115 V a.c.
50/60
22/20
161/195
82/95
45.0/50.0
2,700/3,100
CE; cURus; VDE;
A12B12STSW00
120x120x38 104.8
Sleeve
115 V a.c.
50/60
22/23.8 161/195
82/95
45.0/50.0
2,700/3,100
CE; cURus; VDE;
A12B23ETSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
6.5/6.0
85/83
19/16
29.0/28.0
1,500/1,450
CE; VDE;
A12B23HTBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
A12B23HTSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
A12B23LTBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
11/10
114/102
27/22
43.0/42.0
2,200/1,800
CE; cURus; VDE;
A12B23LTSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
11/10
114/102
27/22
43.0/42.0
2,200/1,800
CE; cURus; VDE;
A12B23MTBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
16/15
133/143
35/52
43.0/45.0
2,400/2,600
CE; cURus; VDE;
A12B23MTSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
16/15
133/143
35/52
43.0/45.0
2,400/2,600
CE; cURus; VDE;
A12B23STBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
22/21
143/199
62/97
48.0/50.0
2,700/3,100
CE; cURus; VDE;
A12B23STSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
22/21
143/199
62/97
48.0/50.0
2,700/3,100
CE; cURus; VDE;
A12B23VTBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
10/10
98/105
28/28
34.0/35.0
1,800/1,900
CE; VDE;
Technical specifications
Technical drawing
Fandis
■
97
A12BW LEADS
Standard fans - Costech
120x120x38mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
• VDE Reg. No. A634
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
Rated
Voltage
Freq.
Rated
power
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Ball
115 V a.c.
50/60
20/18
136/168
57/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
mm
A12B12HWBW00 120x120x38 104.8
A12B23HWBW00 120x120x38 104.8
Max air Static
flow
Pressure
Rated
Speed
Noise
Approvals
Ball
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
Sleeve
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0
2,750/3,050
CE; cURus; VDE;
120x120x38 104.8
Ball
230 V a.c.
50/60
11/10
114/102
27/22
43.0/42.0
2,200/1,800
CE; cURus; VDE;
120x120x38 104.8
Sleeve
230 V a.c.
50/60
11/10
116/104
36/20
41.0/38.0
2,200/1,800
CE; cURus; VDE;
A12B23MWBW00 120x120x38 104.8
Ball
230 V a.c.
50/60
16/15
133/143
35/52
43.0/45.0
2,400/2,600
CE; cURus; VDE;
A12B23SWBW00
Ball
230 V a.c.
50/60
22/21
143/199
62/97
48.0/50.0
2,700/3,100
CE; cURus; VDE;
A12B23HWSW00
120x120x38 104.8
A12B23LWBW00
A12B23LWSW00
120x120x38 104.8
Technical specifications
98
■
Fandis
Technical drawing
A12RW
Standard fans - Costech
120x120x38mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
• VDE Reg. No. A634
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
A12R23HTBW00
120x120x38 104.8
Ball
230 V a.c.
50/60
20/19
150/167
66/81
48.0/54.0
2,650/3,050
A12R23HTSW00
120x120x38 104.8
Sleeve
230 V a.c.
50/60
20/19
150/167
66/81
48.0/54.0
2,650/3,050
Technical specifications
Approvals
CE; cURus;
VDE;
CE; cURus;
VDE;
Technical drawing
Fandis
■
99
A12Z WW
Standard fans - Costech
Ø113x38mm
AC axial fans
General specifications
• Impeller in fibreglass reinforced PBT PC and housing cover in black die cast aluminum alloy
• Shaded pole motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
A12W12HWBW00
Dimensions Holes
Bearing
ØxC
(F)
mm
mm
113x38
45.5
Ball
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
V
Hz
W
m3/h
Pa
dB(A)
Rpm
115 V a.c.
50/60
20/18
150/167
66/81
43.0/48.0
2,650/2,950
CE; cURus;
Noise
Rated
Speed
Approvals
A12W23HWBW00
113x38
45.5
Ball
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0
2,550/2,900
CE; cURus;
A12W23SWBW00
113x38
45.5
Ball
230 V a.c.
50/60
22/21
165/200
67/94
48.0/50.0
2,700/3,100
CE;
A12Z12HWBW00
113x38
45.5
Ball
115 V a.c.
50/60
19/18
150/167
66/81
43.0/48.0
2,650/2,950
CE;
A12Z12HWSW00
113x38
45.5
Sleeve
115 V a.c.
50/60
19/18
150/167
66/81
43.0/48.0
2,650/2,950
CE;
A12Z23HWBW00
113x38
45.5
Ball
230 V a.c.
50/60
18/18
148/182
65/80
46.0/49.0
2,550/2,900
CE;
A12Z23HWSW00
113x38
45.5
Sleeve
230 V a.c.
50/60
18/18
148/182
65/80
46.0/49.0
2,550/2,900
CE;
Technical specifications
100
■
Fandis
Technical drawing
A13BF
Standard fans - Costech
127x127x38mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
Pa
dB(A)
Rpm
A13B12HTBF00
127x127x38 113.5
Ball
115 V a.c.
50/60
17/15
174/204
72/28
46.0/50.0
2,700/3,000
CE; cURus;
A13B23HTBF00
127x127x38 113.5
Ball
230 V a.c.
50/60
17/15
174/204
72/28
46.0/50.0
2,700/3,000
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
101
A17CF
Standard fans - Costech
172x150x51mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Thermally protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
A17C12HWBF00
172x150x51
162
Ball
115 V a.c.
50/60
32/28
290/331
105/95
50.0/55.0
2,750/3,100
CE; cURus;
A17C23HWBF00
172x150x51
162
Ball
230 V a.c.
50/60
35/30
290/331
105/95
50.0/55.0
2,750/3,100
CE; cURus;
Technical specifications
102
■
Fandis
Technical drawing
C17BF
Standard fans - Costech
172x150x38mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Thermally protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C17B12HTBF00
172x150x38
162
Ball
115 V a.c.
50/60
29/28
300/360
167/187
54.0/58.0
2,850/3,400
CE; cURus;
C17B23HTBF00
172x150x38
162
Ball
230 V a.c.
50/60
27/26
300/360
167/187
54.0/58.0
2,850/3,400
CE; cURus;
Technical specifications
Technical drawing
A
F
C
B
Fandis
■
103
C17CF
Standard fans - Costech
172x150x51mm
AC axial fans
General specifications
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Thermally protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C17C12HTBF00
172x150x51
162
Ball
115 V a.c.
50/60
31/31
348/384
157/197
53.0/58.0
2,850/3,400
CE; cURus;
C17C23HTBF00
172x150x51
162
Ball
230 V a.c.
50/60
29/29
348/384
157/197
53.0/58.0
2,850/3,400
CE; cURus;
Technical specifications
Technical drawing
A
F
C
B
104
■
Fandis
C18CF
Standard fans - Costech
Ø172x51mm
AC axial fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Thermally protected motor
• Electrical connection: flat terminals
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
ØxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Static
Pressure
Noise
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
C18C12HTBF00
172x51
162
Ball
115 V a.c.
50/60
31/31
348/384
157/197
50.0/55.0
2,850/3,400
CE; cURus;
C18C23HTBF00
172x51
162
Ball
230 V a.c.
50/60
29/29
348/384
157/197
50.0/55.0
2,850/3,400
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
105
C22SD
Standard fans - Costech
218x218x83mm
AC axial fans
General specifications
• Casing in die cast aluminum alloy
• Impeller in fibreglass reinforced PA 6/6
• External rotor fan
• Thermally protected motor
• Electrical connection: 4-poles terminal block
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C22S12HKBD00
218x218x83
170
Ball
115 V a.c.
50/60
79/96
855/930
190/201
64.6/67.4
2,490/2,760
CE;
C22S23HKBD00
218x218x83
170
Ball
230 V a.c.
50/60
78/94
855/930
197/211
65.0/68.0
2,490/2,750
CE;
C22S40HKBD00
218x218x83
170
Ball
400 V a.c.
50
174
970
265
61.0
2,770
CE;
Technical specifications
106
■
Fandis
Technical drawing
C22SU
Standard fans - Costech
218x218x83mm
AC axial fans
General specifications
FRAME FANS
• Casing in die cast aluminum alloy
• Impeller in fibreglass reinforced PA 6/6
• External rotor fan
• Thermally protected motor
• Electrical connection: 4-poles terminal block
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C22S12HKBU00
218x218x83
170
Ball
115 V a.c.
50/60
68/70
800/895
163/175
64.6/67.4
2,193/2,377
CE; cURus;
C22S23HKBU00
218x218x83
170
Ball
230 V a.c.
50/60
70/85
837/937
173/192
65.0/68.0
2,232/2,461
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
107
C25SE
Standard fans - Costech
280x280x80mm
AC axial fans
General specifications
• Casing in die cast aluminum alloy
• Impeller in black painted steel
• External rotor fan
• Thermally protected motor
• Electrical connection: 4-poles terminal block
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C25S12HKBE00
280x280x80 208.6
Ball
115 V a.c.
50/60 107/138 1,680/1,920
299/270
64.6/67.4
2,730/3,170
CE;
C25S23HKBE00
280x280x80 208.6
Ball
230 V a.c.
50/60 101/127 1,630/1,865
280/280
67.0/70.0
2,735/3,150
CE;
C25S40HKBE00
280x280x80 208.6
Ball
400 V 3 ~
50/60
280/275
67.0/69.0
2,635/2,840
CE;
Technical specifications
108
■
Fandis
86/117 1,540/1,680
Technical drawing
C25SE 01
Standard fans - Costech
280x280x80mm
AC axial fans
General specifications
FRAME FANS
• Casing in die cast aluminum alloy
• Impeller in black painted steel
• External rotor fan
• Thermally protected motor
• Electrical connection: 4-poles terminal block
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
C25S23HKBE01
mm
280x280x80 208.6
Technical specifications
Ball
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
250/220
67.8/72.0
2,725/3,105
230 V a.c.
50/60 104/135 1,660/1,835
Approvals
CE;
Technical drawing
Fandis
■
109
C25SU
Standard fans - Costech
280x280x80mm
AC axial fans
General specifications
• Casing in die cast aluminum alloy
• Impeller in black painted steel
• External rotor fan
• Thermally protected motor
• Electrical connection: 4-poles terminal block
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
mm
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
Hz
W
m3/h
Pa
dB(A)
Rpm
Approvals
C25S12HKBU00
280x280x80 208.6
Ball
115 V a.c.
50/60 150/170 1,450/1,680
255/240
67.8/72.0
2,675/3,040
CE; cURus;
C25S23HKBU00
280x280x80 208.6
Ball
230 V a.c.
50/60 130/150 1,660/1,835
250/220
67.8/72.0
2,725/3,105
CE; cURus;
Technical specifications
110
■
Fandis
Technical drawing
A12BA Q109
Standard fans - Costech
fan filter kit
AC axial fans
General specifications
FRAME FANS
• Fan filter kit composed by metal fan guard, a.c. fan, mounting frame, fiberglass net, cover and
hardware
• Casing in die cast aluminum alloy
• Impeller in black fiberglass reinforced PBT
• Shaded pole motor
• Impedance protected motor
• Electrical connection: flat terminals
Technical data
Model
Dimensions
AxBxC
Holes
(F)
mm
mm
A12B23MTBAQ109 120x120x38
Technical specifications
104.8
Bearing
Ball
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
V
Hz
W
m3/h
Pa
230 V a.c.
50/60
14/13
110/115
56/44
Noise
Rated
Speed
dB(A)
Rpm
Approvals
40.0/41.0 2,460/2,530
CE;
Technical drawing
+
+
Fandis
■
111
E08BL E12BL
80x80x38mm, 120x120x38mm
EC fans
AC axial fans
General specifications
• Casing and impeller in black thermoplastic
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
Technical data
Model
E08B12HWBL00
E08B23HWBL00
E12B23HWBL00
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
V
Hz
W
m3/h
Pa
dB(A)
Rpm
115 V a.c.
50/60
5.0/5.0
64/68,5
46/53
35.0/37.0
2,800/3,000
Noise
Rated
Speed
Approvals
mm
mm
80x80x38
71.5
80x80x38
71.5
Ball
230 V a.c.
50/60
5.0/5.0
68/73
53/61
37.0/39.0
3,000/3,200
CE;
120x120x38 104.8
Ball
230 V a.c.
50/60
6.0/6.0
198/206
79/77
45.0/46.8
3,000/3,100
CE;
Ball
CE;
E12B23LWBL00
120x120x38 104.8
Ball
230 V a.c.
50/60
2.5/2.5
132/138
32/37
34.0/35.7
2,000/2,100
CE;
E12B23MWBL00
120x120x38 104.8
Ball
230 V a.c.
50/60
4.0/4.0
169/176
55/58
40.0/41.8
2,500/2,700
CE;
Technical specifications
112
■
Fandis
Technical drawing
D20EA
Standard fans - Costech
20x20x10mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
D20E01LWBA00
20x20x10
16
Ball
5 V d.c.
0.40
1.0
12
20.0
9,000
CE; UR;
D20E01MWBA00
20x20x10
16
Ball
5 V d.c.
0.70
1.4
20
26.0
11,500
CE; cURus;
D20E04LWBA00
20x20x10
16
Ball
12 V d.c.
0.72
0.85
10
15.0
9,000
CE;
D20E04MWBA00
20x20x10
16
Ball
12 V d.c.
0.84
1.0
15
22.0
11,500
CE;
Technical specifications
Technical drawing
Fandis
■
113
D02EZ
Standard fans - Costech
25x25x10mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
D02E01HWBZ00
25x25x10
20
Ball
5 V d.c.
0.70
4.3
50
29.0
12,000
CE; cURus;
D02E01MWBZ00
25x25x10
20
Ball
5 V d.c.
0.50
3.6
37
23.0
10,000
CE; cURus;
D02E04HWBZ00
25x25x10
20
Ball
12 V d.c.
1.1
4.3
50
29.0
12,000
CE; cURus;
D02E04MWBZ00
25x25x10
20
Ball
12 V d.c.
0.96
3.6
37
23.0
10,000
CE; cURus;
Technical specifications
114
■
Fandis
Technical drawing
D03EA
Standard fans - Costech
30x30x10mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Rated
Speed
Approvals
mm
mm
Pa
dB(A)
Rpm
D03E01LWBA00
30x30x10
24
Ball
5 V d.c.
0.60
5.5
30
20.2
8,000
CE; cURus;
D03E01MWBA00
30x30x10
24
Ball
5 V d.c.
0.65
6.4
42
28.0
9,000
CE; cURus;
D03E04LWBA00
30x30x10
24
Ball
12 V d.c.
0.72
5.1
32
26.0
8,000
CE; cURus;
D03E04MWBA00
30x30x10
24
Ball
12 V d.c.
0.60
6.4
42
28.0
9,000
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
115
D04ET
Standard fans - Costech
40x40x10mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D04E01HWBT00
40x40x10
32
D04E01HWST00
40x40x10
32
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
5 V d.c.
0.95
11
25
26.0
6,000
CE; cURus;
Sleeve
5 V d.c.
0.95
11
25
26.0
6,000
CE; cURus;
Bearing
Rated
Speed
Approvals
D04E01MWBT00
40x40x10
32
Ball
5 V d.c.
0.55
8.5
19
22.0
4,800
CE; cURus;
D04E01MWST00
40x40x10
32
Sleeve
5 V d.c.
0.75
8.5
19
22.0
4,800
CE; cURus;
D04E04HWBT00
40x40x10
32
Ball
12 V d.c.
1.2
11
25
26.0
6,000
CE; cURus;
D04E04HWST00
40x40x10
32
Sleeve
12 V d.c.
1.2
11
25
26.0
6,000
CE; cURus;
D04E04MWBT00
40x40x10
32
Ball
12 V d.c.
0.96
8.5
19
22.0
4,800
CE; cURus;
D04E04MWST00
40x40x10
32
Sleeve
12 V d.c.
0.96
8.5
19
22.0
4,800
CE; cURus;
D04E05HWBT00
40x40x10
32
Ball
24 V d.c.
2.2
11
25
26.0
6,000
CE; cURus;
D04E05HWST00
40x40x10
32
Sleeve
24 V d.c.
2.2
11
25
26.0
6,000
CE; cURus;
D04E05MWBT00
40x40x10
32
Ball
24 V d.c.
1.9
8.5
19
22.0
4,800
CE; cURus;
D04E05MWST00
40x40x10
32
Sleeve
24 V d.c.
1.9
8.5
19
22.0
4,800
CE; cURus;
Technical specifications
116
■
Fandis
Technical drawing
D04FA
Standard fans - Costech
40x40x15mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D04F04HWBA00
40x40x15
32
D04F04HWSA00
40x40x15
32
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
1.4
15
61
39.3
8,000
CE; cURus;
Sleeve
12 V d.c.
1.4
15
61
39.3
8,000
CE; cURus;
Bearing
Rated
Speed
Approvals
D04F04LWBA00
40x40x15
32
Ball
12 V d.c.
0.96
11
35
27.5
6,000
CE; cURus;
D04F04LWSA00
40x40x15
32
Sleeve
12 V d.c.
0.96
11
35
27.5
6,000
CE; cURus;
D04F04MWBA00
40x40x15
32
Ball
12 V d.c.
1.2
13
45
31.8
7,000
CE; cURus;
D04F04MWSA00
40x40x15
32
Sleeve
12 V d.c.
1.2
13
45
31.8
7,000
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
117
D04DZ
Standard fans - Costech
40x40x20mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
D04D05HWBZ00
Dimensions
AxBxC
Holes
(F)
mm
mm
40x40x20
32
Technical specifications
118
■
Fandis
Bearing
Ball
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
24 V d.c.
2.2
15
70
36.0
7,800
Technical drawing
Rated
Speed
Approvals
CE; cURus;
D45EA
Standard fans - Costech
45x45x10mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D45E01HWBA00
45x45x10
37
D45E01HWSA00
45x45x10
37
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
5 V d.c.
0.20
15
25
27.4
5,500
CE; cURus;
Sleeve
5 V d.c.
0.20
15
25
27.4
5,500
CE; UR;
Bearing
Rated
Speed
Approvals
D45E01MWBA00
45x45x10
37
Ball
5 V d.c.
0.30
12
18
22.0
4,500
CE; cURus;
D45E01MWSA00
45x45x10
37
Sleeve
5 V d.c.
0.30
12
18
22.0
4,500
CE; UR;
D45E04HWBA00
45x45x10
37
Ball
12 V d.c.
1.1
15
25
27.4
5,500
CE; UR;
D45E04HWSA00
45x45x10
37
Sleeve
12 V d.c.
1.1
15
25
27.4
5,500
CE; UR;
D45E04MWBA00
45x45x10
37
Ball
12 V d.c.
0.84
12
18
22.0
4,500
CE; UR;
D45E04MWSA00
45x45x10
37
Sleeve
12 V d.c.
0.84
12
18
22.0
4,500
CE; UR;
Technical specifications
Technical drawing
Fandis
■
119
D50EA
Standard fans - Costech
50x50x10mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D50E04LWBA00
50x50x10
40
D50E04LWSA00
50x50x10
40
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
1.2
10
10
20.0
3,700
CE; cURus;
Sleeve
12 V d.c.
1.2
10
10
20.0
3,700
CE; cURus;
Bearing
Rated
Speed
Approvals
D50E04MWBA00
50x50x10
40
Ball
12 V d.c.
1.4
15
20
24.0
4,300
CE; cURus;
D50E04MWSA00
50x50x10
40
Sleeve
12 V d.c.
1.4
15
20
24.0
4,300
CE; cURus;
Technical specifications
120
■
Fandis
Technical drawing
D50FA
Standard fans - Costech
50x50x15mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D50F04HWBA00
50x50x15
40
D50F04HWSA00
50x50x15
40
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
1.7
24
32
30.2
4,800
CE; cURus;
Sleeve
12 V d.c.
1.7
24
32
34
4,800
CE; cURus;
Bearing
Rated
Speed
Approvals
D50F04LWSA00
50x50x15
40
Sleeve
12 V d.c.
0.96
19
17
25
3,600
CE; cURus;
D50F04MWSA00
50x50x15
40
Sleeve
12 V d.c.
1.2
22
25
30
4,300
CE; cURus;
D50F04SWBA00
50x50x15
40
Ball
12 V d.c.
2.4
29
48
33.8
5,500
CE; cURus;
D50F04SWSA00
50x50x15
40
Sleeve
12 V d.c.
2.4
29
48
33.8
5,500
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
121
D06ET
Standard fans - Costech
60x60x10mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D06E01HWST00
60x60x10
50
D06E01MWBT00
60x60x10
50
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
5 V d.c.
0.75
24
27
33.1
4,900
CE;
Ball
5 V d.c.
0.75
20
20
28.7
4,200
CE;
Bearing
Rated
Speed
Approvals
D06E01MWST00
60x60x10
50
Sleeve
5 V d.c.
0.75
20
20
28.7
4,200
CE;
D06E04HWST00
60x60x10
50
Sleeve
12 V d.c.
1.8
24
27
33.1
4,900
CE; UR;
D06E04MWST00
60x60x10
50
Sleeve
12 V d.c.
1.6
20
20
28.7
4,200
CE; UR;
Technical specifications
122
■
Fandis
Technical drawing
D06FA
Standard fans - Costech
60x60x15mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D06F01HWSA00
60x60x15
50
D06F01MWBA00
60x60x15
50
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
5 V d.c.
1.9
27
36
33.4
4,500
CE; UR;
Ball
5 V d.c.
1.3
24
26
31.2
3,900
CE; UR;
Bearing
Rated
Speed
Approvals
D06F01MWSA00
60x60x15
50
Sleeve
5 V d.c.
1.3
24
26
31.2
3,900
CE; UR;
D06F04HWSA00
60x60x15
50
Sleeve
12 V d.c.
1.6
27
36
33.4
4,500
CE; UR;
D06F04MWBA00
60x60x15
50
Ball
12 V d.c.
1.3
24
26
31.2
3,900
CE; cURus;
D06F04MWSA00
60x60x15
50
Sleeve
12 V d.c.
1.3
24
26
31.2
3,900
CE; cURus;
D06F05HWBA00
60x60x15
50
Ball
24 V d.c.
2.2
26
28
35.2
4,500
CE;
D06F05HWSA00
60x60x15
50
Sleeve
24 V d.c.
2.16
26
38
35.2
4,500
CE; cURus;
D06F05MWBA00
60x60x15
50
Ball
24 V d.c.
1.7
24
26
31.2
3,900
CE;
D06F05MWSA00
60x60x15
50
Sleeve
24 V d.c.
1.7
24
26
31.2
3,900
CE;
Technical specifications
Technical drawing
Fandis
■
123
D06DA
Standard fans - Costech
60x60x20mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D06D04HWBA00
60x60x20
50
D06D04HWSA00
60x60x20
50
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
1.9
28
34
31.0
4,500
CE; UR;
Sleeve
12 V d.c.
1.9
28
34
31.0
4,500
CE; UR;
Bearing
Rated
Speed
Approvals
D06D04LWBA00
60x60x20
50
Ball
12 V d.c.
0.96
21
21
23.5
3,500
CE; UR;
D06D04LWSA00
60x60x20
50
Sleeve
12 V d.c.
0.96
21
21
23.5
3,500
CE; UR;
D06D04MWBA00
60x60x20
50
Ball
12 V d.c.
1.6
23
25
26.4
3,900
CE; UR;
D06D04MWSA00
60x60x20
50
Sleeve
12 V d.c.
1.6
23
25
26.4
3,900
CE; UR;
D06D05LWBA00
60x60x20
50
Ball
24 V d.c.
1.7
21
21
23.5
3,500
CE; cURus;
D06D05LWSA00
60x60x20
50
Sleeve
24 V d.c.
1.7
21
21
23.5
3,500
CE; cURus;
D06D05MWBA00
60x60x20
50
Ball
24 V d.c.
1.9
23
25
26.4
3,900
CE; UR;
D06D05MWSA00
60x60x20
50
Sleeve
24 V d.c.
1.9
23
25
26.4
3,900
CE; UR;
Technical specifications
124
■
Fandis
Technical drawing
D06AA
Standard fans - Costech
60x60x25mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance or IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D06A04HWBA00
60x60x25
50
D06A04HWSA00
60x60x25
50
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
2.8
42
50
36.8
4,600
CE; cURus;
Sleeve
12 V d.c.
2.8
42
50
35.2
4,500
CE; cURus;
Bearing
Rated
Speed
Approvals
D06A04LWBA00
60x60x25
50
Ball
12 V d.c.
0.96
23
18
20.6
2,700
CE; cURus;
D06A04LWSA00
60x60x25
50
Sleeve
12 V d.c.
0.96
22
16
18.1
2,500
CE; UR;
D06A04MWBA00
60x60x25
50
Ball
12 V d.c.
1.7
32
32
29.8
3,600
CE; UR;
D06A04MWSA00
60x60x25
50
Sleeve
12 V d.c.
1.7
31
30
28.6
3,500
CE; UR;
D06A04SWBA00
60x60x25
50
Ball
12 V d.c.
3.2
50
67
40.5
5,300
CE; cURus;
D06A04SWSA00
60x60x25
50
Sleeve
12 V d.c.
4.2
46
57
40.0
5,000
CE; cURus;
D06A05HWBA00
60x60x25
50
Ball
24 V d.c.
3.6
42
50
35.2
4,500
CE; cURus;
D06A05HWSA00
60x60x25
50
Sleeve
24 V d.c.
3.6
42
50
35.2
4,500
CE; cURus;
D06A05LWBA00
60x60x25
50
Ball
24 V d.c.
1.9
22
16
18.1
2,500
CE; UR;
D06A05LWSA00
60x60x25
50
Sleeve
24 V d.c.
1.9
22
16
18.1
2,500
CE; UR;
D06A05MWBA00
60x60x25
50
Ball
24 V d.c.
1.9
31
30
28.6
3,500
CE; UR;
D06A05MWSA00
60x60x25
50
Sleeve
24 V d.c.
1.9
31
30
28.6
3,500
CE; UR;
D06A05SWBA00
60x60x25
50
Ball
24 V d.c.
3.8
47
60
37.6
5,000
CE; cURus;
D06A05SWSA00
60x60x25
50
Sleeve
24 V d.c.
3.8
47
60
37.6
5,000
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
125
D07AA
Standard fans - Costech
70x70x25mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D07A04HWSA00
70x70x25
60
D07A04MWBA00
70x70x25
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
12 V d.c.
2.3
61
55
35.5
4,200
CE; UR;
60
Ball
12 V d.c.
1.9
55
44
32.0
3,800
CE; UR;
Bearing
Rated
Speed
Approvals
D07A04MWSA00
70x70x25
60
Sleeve
12 V d.c.
1.9
55
44
32.0
3,800
CE; UR;
D07A05HWBA00
70x70x25
60
Ball
24 V d.c.
3.1
61
55
35.5
4,200
CE;
D07A05HWSA00
70x70x25
60
Sleeve
24 V d.c.
3.1
61
55
35.5
4,200
CE;
D07A05MWBA00
70x70x25
60
Ball
24 V d.c.
2.6
55
44
32.0
3,800
CE;
D07A05MWSA00
70x70x25
60
Sleeve
24 V d.c.
2.6
55
44
32.0
3,800
CE;
Technical specifications
126
■
Fandis
Technical drawing
D08FA
Standard fans - Costech
80x80x15mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D08F01HWSA00
80x80x15
71.5
D08F01MWBA00
80x80x15
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
5 V d.c.
0.44
51
32
31.4
3,200
CE; UR;
71.5
Ball
5 V d.c.
1.2
38
21
26.0
2,440
CE; UR;
Bearing
Rated
Speed
Approvals
D08F01MWSA00
80x80x15
71.5
Sleeve
5 V d.c.
1.2
38
21
26.0
2,440
CE; UR;
D08F04HWBA00
80x80x15
71.5
Ball
12 V d.c.
2.3
51
32
31.4
3,200
CE; UR;
D08F04HWSA00
80x80x15
71.5
Sleeve
12 V d.c.
2.3
51
32
31.4
3,200
CE; UR;
D08F04MWBA00
80x80x15
71.5
Ball
12 V d.c.
1.8
38
21
26.0
2,440
CE; UR;
D08F04MWSA00
80x80x15
71.5
Sleeve
12 V d.c.
1.8
37
19
24.9
2,440
CE; UR;
D08F05HWSA00
80x80x15
71.5
Sleeve
24 V d.c.
3.1
51
32
31.4
3,400
CE; UR;
D08F05MWBA00
80x80x15
71.5
Ball
24 V d.c.
2.4
38
21
26.0
2,440
CE; UR;
D08F05MWSA00
80x80x15
71.5
Sleeve
24 V d.c.
2.4
38
21
26.0
2,440
CE; UR;
Technical specifications
Technical drawing
Fandis
■
127
D08DA
Standard fans - Costech
80x80x20mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D08D04HWBA00
80x80x20
71.5
D08D04HWSA00
80x80x20
71.5
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
2.9
49
37
34.9
3,100
CE; UR;
Sleeve
12 V d.c.
2.9
49
37
34.0
3,000
CE; UR;
Bearing
Rated
Speed
Approvals
D08D04MWBA00
80x80x20
71.5
Ball
12 V d.c.
1.9
40
24
27.0
2,550
CE; cURus;
D08D04MWSA00
80x80x20
71.5
Sleeve
12 V d.c.
1.9
40
24
27.0
2,550
CE; cURus;
D08D05HWBA00
80x80x20
71.5
Ball
24 V d.c.
3.6
49
37
32.4
3,100
CE; UR;
D08D05HWSA00
80x80x20
71.5
Sleeve
24 V d.c.
3.6
47
39
34.0
3,000
CE; UR;
D08D05MWBA00
80x80x20
71.5
Ball
24 V d.c.
3.1
40
24
27.0
2,550
CE; cURus;
D08D05MWSA00
80x80x20
71.5
Sleeve
24 V d.c.
3.1
40
24
27.0
2,550
CE; cURus;
Technical specifications
128
■
Fandis
Technical drawing
D08AA
Standard fans - Costech
80x80x25 mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance or IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D08A05HWBA00
80x80x25
71.5
D08A05HWSA00
80x80x25
71.5
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
24 V d.c.
3.8
70
39
36.2
3,200
CE; UR;
Sleeve
24 V d.c.
3.8
70
39
35.2
3,000
CE; UR;
Bearing
Rated
Speed
Approvals
D08A05LWBA00
80x80x25
71.5
Ball
24 V d.c.
2.2
43
17
22.7
2,000
CE; cURus;
D08A05LWSA00
80x80x25
71.5
Sleeve
24 V d.c.
2.2
43
17
22.7
2,000
CE; UR;
D08A05MWBA00
80x80x25
71.5
Ball
24 V d.c.
2.4
55
25
29.4
2,500
CE; cURus;
D08A05MWSA00
80x80x25
71.5
Sleeve
24 V d.c.
2.4
53
23
28.6
2,400
CE; cURus;
D08A05SWBA00
80x80x25
71.5
Ball
24 V d.c.
6.2
89
66
40.8
3,900
CE; cURus;
D08A05SWSA00
80x80x25
71.5
Sleeve
24 V d.c.
6.2
89
66
40.8
3,900
CE; cURus;
D08A07HWBA00
80x80x25
71.5
Ball
48 V d.c.
5.3
40
35
35.2
3,000
CE; UR;
Technical specifications
Technical drawing
Fandis
■
129
D09DA
Standard fans - Costech
92x92x20mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D09D04HWSA00
92x92x20
82.5
D09D04MWBA00
92x92x20
82.5
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
12 V d.c.
3.0
56
26
32.8
2,700
CE; UR;
Ball
12 V d.c.
1.9
49
21
28.9
2,430
CE; UR;
Bearing
Rated
Speed
Approvals
D09D04MWSA00
92x92x20
82.5
Sleeve
12 V d.c.
1.9
49
21
28.9
2,430
CE; UR;
D09D05HWSA00
92x92x20
82.5
Sleeve
24 V d.c.
3.4
56
26
32.8
2,700
CE; UR;
D09D05MWBA00
92x92x20
82.5
Ball
24 V d.c.
2.4
49
21
28.9
2,430
CE; cURus;
D09D05MWSA00
92x92x20
82.5
Sleeve
24 V d.c.
2.4
49
21
28.9
2,430
CE; cURus;
Technical specifications
130
■
Fandis
Technical drawing
D09AZ
Standard fans - Costech
92x92x25 mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D09A04EWBZ00
92x92x25
82.5
D09A04HWBZ00
92x92x25
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
12 V d.c.
1.08
51
8
19.1
1,600
CE; cURus;
82.5
Ball
12 V d.c.
3.0
95
37
37.5
2,900
CE; cURus;
Bearing
Rated
Speed
Approvals
D09A04HWSZ00
92x92x25
82.5
Sleeve
12 V d.c.
3.0
95
37
37.5
2,900
CE; cURus;
D09A04LWBZ00
92x92x25
82.5
Ball
12 V d.c.
1.6
66
18
27.5
2,100
CE; cURus;
D09A04LWSZ00
92x92x25
82.5
Sleeve
12 V d.c.
1.6
66
18
27.5
2,100
CE; cURus;
D09A04MWBZ00
92x92x25
82.5
Ball
12 V d.c.
2.0
76
25
31.2
2,400
CE; cURus;
D09A04MWSZ00
92x92x25
82.5
Sleeve
12 V d.c.
2.0
76
25
31.2
2,400
CE; cURus;
D09A04SWBZ00
92x92x25
82.5
Ball
12 V d.c.
4.7
105
47
39.4
3,300
CE; cURus;
D09A04SWSZ00
92x92x25
82.5
Sleeve
12 V d.c.
4.7
105
47
42.2
3,300
CE; cURus;
D09A05HWBZ00
92x92x25
82.5
Ball
24 V d.c.
3.6
95
36
37.5
2,900
CE; cURus;
D09A05HWSZ00
92x92x25
82.5
Sleeve
24 V d.c.
3.6
87
34
35.4
2,900
CE; cURus;
D09A05LWBZ00
92x92x25
82.5
Ball
24 V d.c.
1.9
66
18
28.7
2,000
CE; cURus;
D09A05LWSZ00
92x92x25
82.5
Sleeve
24 V d.c.
1.9
66
18
28.7
2,000
CE; cURus;
D09A05MWBZ00
92x92x25
82.5
Ball
24 V d.c.
2.9
76
25
31.2
2,400
CE; cURus;
D09A05MWSZ00
92x92x25
82.5
Sleeve
24 V d.c.
2.9
76
25
31.2
2,400
CE; cURus;
D09A05SWBZ00
92x92x25
82.5
Ball
24 V d.c.
5.0
105
47
42.2
3,300
CE; cURus;
D09A05SWSZ00
92x92x25
82.5
Sleeve
24 V d.c.
5.0
105
47
42.2
3,300
CE; cURus;
Technical specifications
Technical drawing
Fandis
■
131
D09BZ
Standard fans - Costech
92x92x38mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
Technical data
Model
D09B05HWBZ00
Dimensions
AxBxC
Holes
(F)
mm
mm
92x92x38
82.5
Technical specifications
132
■
Fandis
Bearing
Ball
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
24 V d.c.
13.2
m3/h
Pa
dB(A)
Rpm
185
125
52.5
4,400
Technical drawing
Rated
Speed
Approvals
CE;
D12AZ
Standard fans - Costech
120x120x25mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D12A04HWSZ00
120x120x25
104.8
D12A04LWBZ00
120x120x25
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Sleeve
12 V d.c.
5.3
151
34
39.1
2,200
CE; cURus;
104.8
Ball
12 V d.c.
2.9
122
23
34.4
1,800
CE; cURus;
Bearing
Rated
Speed
Approvals
D12A04LWSZ00
120x120x25
104.8
Sleeve
12 V d.c.
2.9
122
23
34.4
1,800
CE; UR;
D12A04MWBZ00
120x120x25
104.8
Ball
12 V d.c.
4.0
138
28
38.0
2,050
CE; cURus;
D12A04MWSZ00
120x120x25
104.8
Sleeve
12 V d.c.
4.1
138
28
38.0
2,050
CE; cURus;
D12A04SWBZ00
120x120x25
104.8
Ball
12 V d.c.
6.0
168
43
43.3
2,500
CE; cURus;
D12A04SWSZ00
120x120x25
104.8
Sleeve
12 V d.c.
6.0
168
43
43.3
2,500
CE; cURus;
D12A05HWBZ00
120x120x25
104.8
Ball
24 V d.c.
4.6
149
33
39.1
2,200
CE; cURus;
D12A05HWSZ00
120x120x25
104.8
Sleeve
24 V d.c.
5.8
149
33
39.1
2,200
CE; cURus;
D12A05LWBZ00
120x120x25
104.8
Ball
24 V d.c.
3.4
122
23
34.4
1,800
CE; cURus;
D12A05LWSZ00
120x120x25
104.8
Sleeve
24 V d.c.
3.4
122
23
34.4
1,800
CE; cURus;
D12A05MWBZ00
120x120x25
104.8
Ball
24 V d.c.
4.1
141
29
38.0
2,050
CE; cURus;
D12A05MWSZ00
120x120x25
104.8
Sleeve
24 V d.c.
4.1
141
29
38.0
2,050
CE; cURus;
D12A05SWBZ00
120x120x25
104.8
Ball
24 V d.c.
6.0
168
43
43.3
2,500
CE; cURus;
D12A05SWSZ00
120x120x25
104.8
Sleeve
24 V d.c.
6.0
168
43
43.3
2,500
CE; cURus;
D12A07HWBZ00
120x120x25
104.8
Ball
48 V d.c.
5.8
149
33
39.1
2,200
CE;
Technical specifications
Technical drawing
Fandis
■
133
D12GA
Standard fans - Costech
120x120x32mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
Technical data
Model
D12G05HWBA00
Dimensions
AxBxC
Holes
(F)
mm
mm
120x120x32
104.8
Technical specifications
134
■
Fandis
Bearing
Ball
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
24 V d.c.
6.0
190
60
43.3
2,750
Technical drawing
Rated
Speed
Approvals
CE;
D12BA9
Standard fans - Costech
120x120x38mm
DC axial fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507 and TÜV according to EN60950-1:2006+A11
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D12B05HWBA91
120x120x38
104.8
D12B05VWBA91
120x120x38
104.8
Model
Technical specifications
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
W
m3/h
Pa
dB(A)
Rpm
Ball
24 V d.c.
23.5
340
155
61.0
4,300
CE; cURus;
TUV;
Ball
24 V d.c.
7.2
220
74
48.5
2,800
CE; cURus;
Bearing
Approvals
Technical drawing
Fandis
■
135
D17CA
Standard fans - Costech
172x150x51mm
DC axial fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D17C05HWBA00
172x150x51
162
D17C07HWBA00
172x150x51
162
Model
Technical specifications
136
■
Fandis
Rated
Voltage
Rated
power
Max air
flow
V
W
Ball
24 V d.c.
Ball
48 V d.c.
Bearing
Static
Pressure
Noise
m3/h
Pa
dB(A)
Rpm
24
450
190
60.0
3,500
CE; cURus;
24
450
190
58.8
3,500
CE; cURus;
Technical drawing
Rated
Speed
Approvals
DC6GA
Standard fans - Costech
75x75x30mm
DC centrifugal fans
General specifications
FRAME FANS
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions
AxBxC
Holes
(F)
mm
mm
Bearing
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
W
m3/h
Pa
dB(A)
Rpm
Approvals
DC6G04HWBA00
75x75x30
81.2
Ball
12 V d.c.
3.6
18
89
38.5
3,000
CE; UR;
DC6G04HWSA00
75x75x30
81.2
Sleeve
12 V d.c.
3.6
18
89
38.5
3,000
CE; UR;
DC6G04MWBA00
75x75x30
81.2
Ball
12 V d.c.
2.4
13
58
34.9
2,600
CE; UR;
DC6G05MWBA00
75x75x30
81.2
Ball
24 V d.c.
3.4
13
58
34.9
2,600
CE; UR;
DC6G05MWSA00
75x75x30
81.2
Sleeve
24 V d.c.
3.4
13
58
34.9
2,600
CE; UR;
Technical specifications
Technical drawing
Fandis
■
137
DC1GA
Standard fans - Costech
120x120x31mm
DC centrifugal fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
Dimensions
AxBxC
Holes
(F)
mm
mm
DC1G05MWBA01 120x120x31
Technical specifications
138
■
Fandis
104.8
Bearing
Ball
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
Rated
Speed
V
W
m3/h
Pa
dB(A)
Rpm
24 V d.c.
9.4
48
220
49.0
2,300
Technical drawing
Approvals
CE; cURus;
Frame Fans Introduction
FRAME FANS
EC technology
WHAT IS EC TECHNOLOGY?
EC stands for Electronically Commutated and combines AC and
DC voltages to bring the best of both technologies. The motor
runs on DC, but with a normal AC supply. DC motors already have
low power consumption but, if used in AC applications, need to
convert AC to DC using a bulky, inefficient transformer.
The EC fan incorporates voltage transformation within the
motor. An electronic PCB board, which takes care of AC to DC
transformation and houses the controls, is fitted to the non-rotating
part of the motor (stator).
PRINCIPLE
• Permanent-magnet brushless DC motor
• The stator is driven by electronic switches governed
by a microcontroller
• AC operated (115/230Volts Single phase, 50/60Hz)
BENEFITS
• Energy savings: minimum power consumption and better
efficiency than equivalent AC fan
• Extended operating range (230 Vac 140~264Vac; 115 Vac
80~132Vac)
• Low motor temperature: for longer lifespan than AC equivalent
• Simplicity: electronic and power transformation are completely
integrated within the motor
• High performance: better airflow and pressure values than an
equivalent AC fan
Fandis
■
139
Frame Fans Introduction
DC fans with signal lead
CUSTOMER’S CIRCUIT
FAN
Q1
CUSTOMER’S CIRCUIT
V
FAN
Locked Signal
DC fans with speed
sensor signal
Vo
Ic
V
Locked Signal
DC fans with alarm
signal
Q1
Ic
Vo
It is used to detect if the fan is still rotating or
The integrated electronic sensor provides
GND
GND
a square wave signal proportional to the
stopped. The output is via a third lead wire
fan speed. The signal is via a third lead wire
(open collector type) and it is a continuous
(open collector type).
high or low signal depending on the fan's type.
Output Waveform Speed Control
Output Waveform Alarm Signal
LOCK
LOCK RELEASE
Supply voltage
LOCK
LOCK RELEASE
Supply voltage
Supply voltage
Fan rotation
Fan current
Fan rotation
Fan rotation
Fan current
Fan current
T
T
T
10 SEC
T
10 SEC
IF LOCKED MAYBE HIGH OR LOW
VOH
Locked signal
VOH
Locked signal
VOL
VOL
Locked signal
The ouput waves may change depending on the fan type. For more information, contact our Sales Dept.
Electrical diagram
CUSTOMER’S CIRCUIT
FAN
V
Locked Signal
Q1
Vo
Ic
GND
External signal function design is decided by customer.
140
■
Fandis
Frame Fans Introduction
SPECIAL FRAME FANS
FRAME FANS
Custom and special solutions include a full line of AC/DC fans tested to withstand harsh
environmental and working conditions. They are dustproof and water jet resistance (IP55) or tolerate
high temperature up to +90°C, also thanks to a particular all metal construction.
These special fans ensure safe, reliable operation and an extended service life of the devices.
IP55
Ideal for indoor or
outdoor use in harsh
industrial environments
ALL METAL
Robust metal fan
blades for good
corrosion resistance
HIGH TEMPERATURE
RESISTANT
Capable of running
continuously at 90°C
Model numbering system for Special Frame fans
A
description
MOTOR TYPE
A = a.c. shaded pole motor
C = a.c. capacitor run induction motor
D = d.c. brushless
CASING SIZE
01 = 15x15 mm axial fan
20 = 20x20 mm axial fan
02 = 25x25 mm axial fan
03 = 30x30 mm axial fan
35 = 35x35 mm axial fan
04 = 40x40 mm axial fan
45 = 45x45 mm axial fan
50 = 50x50 mm axial fan
06 = 60x60 mm axial fan
07 = 70x70 mm axial fan
CASING THICKNESS
N = 6.5 mm
E = 10 mm
F = 15 mm
D = 20 mm
A = 25 mm
G = 30-32 mm
B = 38 mm standard flow
R = 38 mm reverse flow
C = 50-52 mm
M = 55 mm
S = 83 mm
W = without casing, standard flow
Z = without casing, reverse flow
08 = 80x80 mm axial fan
09 = 92x92 mm axial fan
12 = 120x120 mm axial fan
13 = 127x127 mm axial fan
17 = 172x150 mm axial fan
18 = ø 172 mm axial fan
22 = 218x218 mm axial fan
25 = 280x280 mm axial fan
C1 = 120x120 mm blower
C6 = 75x75 mm blower
12
B
23
H
T
B
W 00
description
OPTIONS
00 = no option
A = alarm output
S = speed signal output
I = variable speed with integrated
V = variable speed with external termistor
M = digital PWM speed control
T = for high temperature ambient
F = motor IP55 protected
H = motor IP25 protected
Wnn = wires lenght out of standard
Qnn = special version
DESIGN
BEARING TYPE
B = shielded ball S = sleeve
CONNECTION
K = terminal block
T = flat terminals 110 series (2.8x0.5 mm)
W = lead wires
SPEED
E = extra low
M = medium
V = very low
H = high
RATED VOLTAGE
01 = 5 V d.c.
04 = 12 V d.c.
05 = 24 V d.c. / V a.c.
07 = 48 V d.c.
L = low
S = super high
12 = 115 V a.c.
23 = 230 V a.c.
40 = 400 V a.c. 3-phase
Fandis
■
141
A06 08 09 12 17 IP55
Special fans

IP55 AC fans
General specifications
• Casing or housing cover (only for models A12WW and A12ZW) in black die cast aluminum
alloy
• Impeller in fibreglass reinforced PBT PC
• Shaded pole motor
• Impedance or thermally protected motor
• Electrical connection: 2 leads or flat terminals
Technical data
Dimensions
AxBxC
Holes
(F)
Rated
Voltage
Freq.
Rated
power
Max air
flow
mm
mm
V
Hz
W
m3/h
A06G23HWBFF0
60x60x30
50
Pa
Ball
230 V a.c.
50/60
5.0/4.0
14/17
17/27
27.0/28.0 2,400/3,000
CE;
A08B12HWBFF0
80x80x38
A08B23HWBFF0
80x80x38
71.5
Ball
115 V a.c.
50/60
14/12
41/51
40/55
32.0/36.0 2,500/3,000
CE;
71.5
Ball
230 V a.c.
50/60
14/12
41/51
40/55
32.0/36.0 2,500/3,000
CE;
A09A23HTBFF0
A09A23HWBFF0
92x92x25
82.5
Ball
230 V a.c.
50/60
16/14
56/68
45/65
32.0/36.0 2,500/3,000
CE;
92x92x25
82.5
Ball
230 V a.c.
50/60
16/14
56/68
45/65
32.0/36.0 2,500/3,000
CE;
A12B12ETBKF0
120x120x38
104.8
Ball
115 V a.c.
50/60
6.0/5.5
78/84
15/15
27.0/28.0 1,350/1,450
CE;
A12B12LTBKF0
120x120x38
104.8
Ball
115 V a.c.
50/60
7.0/7.0
120/114
35/22
32.0/30.0 2,100/1,950
CE;
A12B23ETBKF0
120x120x38
104.8
Ball
230 V a.c.
50/60
6.5/6.0
78/84
15/15
27.0/28.0 1,350/1,450
CE;
A12B23HTBKF0
120x120x38
104.8
Ball
230 V a.c.
50/60
15/14
162/192
74/88
37.0/41.0 2,600/2,900
CE;
A12B23HWBWF0 120x120x38
104.8
Ball
230 V a.c.
50/60
20/19
148/182
65/80
46.0/49.0 2,750/3,050
CE;
A12B23LTBKF0
120x120x38
104.8
Ball
230 V a.c.
50/60
7.5/7.5
120/114
35/22
32.0/30.0 2,100/1,900
CE;
A12B23LWBWF0
120x120x38
104.8
Ball
230 V a.c.
50/60
11/10
114/102
27/22
43.0/42.0 2,200/1,800
CE;
A12W23HWBWF0 113x113x38
45.5
Ball
230 V a.c.
50/60
20/19
150/180
66/80
46.0/49.0 2,550/2,900
CE;
A12W23SWBWF0 113x113x38
45.5
Ball
230 V a.c.
50/60
22/21
165/200
67/94
48.0/50.0 2,700/3,100
CE;
A12Z23HWBWF0 113x113x38
45.5
Ball
230 V a.c.
50/60
18/18
140/155
62/75
42.0/45.0 2,600/2,950
CE;
A17M12SWBMF0 172x150x55
162
Ball
115 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250
CE;
A17M23SWBMF0 172x150x55
162
Ball
230 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250
CE;
Model
Technical specifications
142
■
Fandis
Bearing
Static
Pressure
Noise
Rated
Speed
dB(A)
Rpm
Technical drawing
Approvals
E12BL IP55
EC fans
120x120x38mm
IP55 AC fans
General specifications
FRAME FANS
• Casing and impeller in black thermoplastic
• Brushless motor
• Impedance protected motor
• Electrical connection: 2 leads
Technical data
Model
Dimensions Holes
Bearing
AxBxC
(F)
mm
E12B23HWBLF0
mm
120x120x38 104.8
Technical specifications
Ball
Rated
Voltage
Freq.
Rated
power
Max air
flow
Static
Pressure
V
Hz
W
m3/h
Pa
dB(A)
Rpm
230 V a.c.
50/60
6/7
190/200
70/75
45.0/46.8
3000/3100
Noise
Rated
Speed
Approvals
CE;
Technical drawing
Fandis
■
143
D04 06 07 08 09 12 IP55

Special fans
IP55 DC fans
General specifications
• Casing and impeller in black fiberglass reinforced PBT
• Brushless motor
• Impedance or IC protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Dimensions
AxBxC
Holes
(F)
mm
mm
D04D05HWBZF0
40x40x20
32
D04E05MWBTF0
40x40x10
32
Model
Rated
Voltage
Rated
power
Max air
flow
Static
Pressure
Noise
V
W
m3/h
Pa
dB(A)
Rpm
Ball
24 V d.c.
2.2
15
70
36.0
7,800
CE;
Ball
24 V d.c.
1.9
8.5
19
22.0
4,800
CE;
Bearing
Rated
Speed
Approvals
D06A04LWBAF0
60x60x25
50
Ball
12 V d.c.
0.96
24
17
18.1
2,500
CE;
D06A05HWBAF0
60x60x25
50
Ball
24 V d.c.
3.6
41
44
35.2
4,500
CE;
D06A05SWBAF0
60x60x25
50
Ball
24 V d.c.
3.8
46
60
37.9
5,000
CE;
D07A04HWBAF0
70x70x25
60
Ball
12 V d.c.
2.3
61
55
35.5
4,200
CE;
D08A04HWBAF0
80x80x25
71.5
Ball
12 V d.c.
3.0
66
37
34.4
3,100
CE; cURus;
D08A04LWBAF0
80x80x25
71.5
Ball
12 V d.c.
1.4
44
18
22.5
2,100
CE;
D08A05HWBAF0
80x80x25
71.5
Ball
24 V d.c.
3.8
69
37
36.2
3,200
CE;
D08A05MWBAF0
80x80x25
71.5
Ball
24 V d.c.
2.6
55
25
29.4
2,500
CE;
D08A05SWBAF0
80x80x25
71.5
Ball
24 V d.c.
6.2
87
59
40.9
3,900
CE;
D09A05HWBZF0
92x92x25
82.5
Ball
24 V d.c.
3.6
95
36
37.5
2,900
CE;
D12A05HWBZF0
120x120x25
104.8
Ball
24 V d.c.
4.6
150
34
39.1
2,200
CE;
D12B04HWBAF0
120x120x38
104.8
Ball
12 V d.c.
6.0
179
66
46.7
2,800
CE;
D12B05HWBAF0
120x120x38
104.8
Ball
24 V d.c.
7.7
179
66
46.7
2,800
CE;
D12B07HWBAF0
120x120x38
104.8
Ball
48 V d.c.
9.6
179
66
46.7
2,800
CE;
Technical specifications
144
■
Fandis
Technical drawing
A09BM 12BM 17MM 17TM
Special fans

all metal AC fans
General specifications
FRAME FANS
• Casing in black die cast aluminum alloy
• Metal impeller
• Shaded pole motor
• Impedance or thermally protected motor
• Electrical connection: 2 leads
• UL approval according to UL 507
Technical data
Model
A09B12HWBM00
Dimensions
AxBxC
Holes
(F)
mm
mm
92x92x38
82.5
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Pa
Ball
115 V a.c.
50/60
12/11
75/87
59/74
37.0/42.0 2,700/3,200 CE; cURus;
Bearing
Static
Pressure
Noise
Rated
Speed
dB(A)
Rpm
Approvals
A09B23HWBM00
92x92x38
82.5
Ball
230 V a.c.
50/60
12/11
75/87
59/74
37.0/42.0 2,700/3,200 CE; cURus;
A12B12HTBM00
120x120x38
104.8
Ball
115 V a.c.
50/60
17/15
151/175
64/59
42.0/46.0 2,700/3,100 CE; cURus;
A12B12LTBM00
120x120x38
104.8
Ball
115 V a.c.
50/60
17/15
107/114
25/22
33.0/35.0 2,000/2,050 CE; cURus;
A12B23HTBM00
120x120x38
104.8
Ball
230 V a.c.
50/60
17/15
151/175
64/59
42.0/46.0 2,700/3,100 CE; cURus;
A12B23LTBM00
120x120x38
104.8
Ball
230 V a.c.
50/60
17/15
107/114
25/22
33.0/35.0 2,000/2,050 CE; cURus;
A17M12SWBM00 172x150x55
162
Ball
115 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250 CE; cURus;
A17M23SWBM00 172x150x55
162
Ball
230 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250 CE; cURus;
A17T12SWBM00
172x150x55
162
Ball
115 V a.c.
50/60
45/45
383/434
123/126
58.0/61.0 2,750/3,150 CE; cURus;
A17T23SWBM00
172x150x55
162
Ball
230 V a.c.
50/60
45/45
383/434
123/126
58.0/61.0 2,750/3,150 CE; cURus;
Technical specifications
A09BM / A12BM
A17MM / A17TM
Fandis
■
145
A09/12BMT 17MMT 17TMT
Special fans

high temperature resistant AC fans
General specifications
• Casing in black die cast aluminum alloy
• Metal impeller
• Shaded pole motor
• Impedance or thermally protected motor
• Electrical connection: 2 leads or flat terminals
• UL approval according to UL 507
Class F
Technical data
Model
A09B12HWBMT0
Dimensions
AxBxC
Holes
(F)
mm
mm
92x92x38
82.5
Rated
Voltage
Freq.
Rated
power
Max air
flow
V
Hz
W
m3/h
Pa
Ball
115 V a.c.
50/60
12/11
75/87
59/74
37.0/42.0 2,700/3,200
CE;
Bearing
Static
Pressure
Noise
Rated
Speed
dB(A)
Rpm
Approvals
A09B23HTBMT0
92x92x38
82.5
Ball
230 V a.c.
50/60
12/11
75/87
59/74
37.0/42.0 2,700/3,200
CE;
A12B12HTBMT0
120x120x38
104.8
Ball
115 V a.c.
50/60
17/15
150/175
64/59
42.0/46.0 2,700/3,100
CE;
A12B12LTBMT0
120x120x38
104.8
Ball
115 V a.c.
50/60
17/15
110/115
25/22
33.0/35.0 2,000/2,050
CE;
A12B23HTBMT0
120x120x38
104.8
Ball
230 V a.c.
50/60
17/15
150/175
64/59
42.0/46.0 2,700/3,100 CE; cURus;
A12B23LTBMT0
120x120x38
104.8
Ball
230 V a.c.
50/60
17/15
110/115
25/22
33.0/35.0 2,000/2,050 CE; cURus;
A17M12SWBMT0 172x150x55
162
Ball
115 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250 CE; cURus;
A17M23SWBMT0 172x150x55
162
Ball
230 V a.c.
50/60
42/42
332/391
137/157
49.0/53.0 2,800/3,250 CE; cURus;
A17T12SWBMT0
172x150x55
162
Ball
115 V a.c.
50/60
45/45
383/434
123/123
58.0/61.0 2,750/3,150 CE; cURus;
A17T23SWBMT0
172x150x55
162
Ball
230 V a.c.
50/60
45/45
383/434
123/123
58.0/61.0 2,750/3,150 CE; cURus;
Technical specifications
146
■
Fandis
A09BMT / A12BMT
A17MMT / A17TMT

Accessories - frame fans

metal fan guards
General specifications
FRAME FANS
• Moving parts protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material: steel wire AISI C1010
• Finishing: nickel-chrome plated
Technical data
Model
Dwg
A
B
C
D
mm
mm
mm
mm
25
1
24
2.2
20
3.2
40
2
29.1
4.8
32
4
45
2
38.3
3.8
37
4.3
50
2
42
3
40
5.2
60
2
53
4.4
50
4.6
80
2
76
5.5
71.5
4.9
92
2
90
5.5
82.5
4.9
120
2
115.6
5.5
105
4.6
127
2
115.6
6
113.3
4.6
150
4
154.4
6.5
162
4.8
150/S
3
154.4
6.5
162
4.8
GMP200NK
5
215
8.7
240
250
GMP250NK
5
278
8.7
295
307
Technical drawing
C
C
ØA
ØD
2 PLACES
ØD
74.2
B
B
ØD
C
4 PLACES
ØA
B
ØA
B
2 PLACES
ØA
C
ØD
2 PLACES
60.2
DWG 3
DWG 4
Technical drawing
B
Ø 23
DWG 2
E
DWG 1
D
C
ØA
Technical
specifications
DWG 5
Fandis
■
147

Accessories - frame fans

metal filters
General specifications
• Moving parts and dust protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material
- Net: 30x30 stainless steel corrugated mesh with 4.8 mm pitch and 3.3 mm depth
- Frame: aluminum
• Color: natural
A
DWG 1
B
Technical data
C
A
C
Model
Ø 4.3
4 PLACES
DWG 2
A
B
2 - Ø4.3
A
B
C
mm
mm
mm
1
60
2.5
50
FM/80
1
83.8
3.0
71.4
FM/92
1
92
3.5
82.5
FM/60
9
C
Dwg
FM/120
1
119
4.0
104.5
FM/150
2
182
4.2
162
Ø150±0.76
Accessories - frame fans
metal ventilation louvres
General specifications
• Moving parts protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material: steel plate with RAL 7035 epoxy powder coating
Model
G120M-7035
A
B
C
A
C
Ø4
4 PLACES
148
■
Fandis
A
B
C
mm
mm
mm
120
7.4
104.8

Accessories - frame fans

plastic fan guards
General specifications
FRAME FANS
• Moving parts protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material: self-extinguishing ABS/PC alloy, according to UL 94V-0
• Finishing: nickel-chrome plated
• Color: black RAL 9005
Technical data
Dwg
A
B
C
mm
mm
mm
G40
1
42.3
3.3
32
G60
1
60
6
50
G80
1
81
5.5
71.4
G92
1
92
5.5
82.5
G120
1
121
6.5
104.8
G150
2
173
10.8
162
Technical drawing
DWG 2
DWG 1
A
B
C
A
A
C
B
C
C
Technical specifications
A
Model
Ø 4.5
4 PLACES
Ø 4.5
4 PLACES
Fandis
■
149

Accessories - frame fans

plastic filters
General specifications
• Moving parts and dust protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material
- Plastic parts: black RAL 9005 self-extinguishing ABS/PC alloy, according to UL 94V-0
- Filter media: white organic and synthetic fibres (polyester and polypropylene) heat
bounded
- Net: natural color fibreglass wiring Ø 0.28 mm, 18x16 mesh
A
B
3
A
Technical data
Model
A
B
mm
mm
F40/MR
46.4
6.5
F60/MR
64
12.2
F80/MR
86
12.2
F92/MR
97
12.2
F120/MR
126
13
F150/MR
179
24.7
Accessories - frame fans
fast assembly plastic fan guards
General specifications
• Moving parts protection, according to EN ISO 12100 and EN ISO 13857 standards
• Material: Self-extinguishing ABS according to UL 94HB
• Color: black RAL 9005
Model
A
B
C
D
E
mm
mm
mm
mm
mm
80
6.5
71.4
5.7
10
G120/S
120
7.3
104.8
5.7
12.2
G127/S
127.5
6.5
113.5
5.7
12
G80/S
B
A
E
A
C
ØD
C
150
■
Fandis

Accessories - frame fans

plastic rivets
General specifications
+ 0.2
- 0.1
D
C
Model
B
Ø8
0.1
Ø 5 -- 0.4
Ø5
Technical data
A
ROUND FLAT HEAD
A
V-SHAPED HEAD
+ 0.2
Ø 5 - 0.1
C
B
Ø8
- 0.1
Ø 5 - 0.6
D
FRAME FANS
• Fast fan and guards mounting
• Material: self-extinguishing nylon 6, according to UL 94V-0
• Suitable for fans with fixing hole diameter from 4mm to 4.8mm
• Available with round flat head or V-shaped head
• Two different stem lengths, 17mm and 22mm
• Color: black RAL 9005 or grey RAL 7032
A
B
C
D
Description
Color
mm
mm
mm
mm
FAR175TPN
17
10
3.6
1.8
FAR175TPR
17
10
3.6
1.8
Flat
7032 (Grey)
FAR175TSN
17
10
3.2
2.2
V-shaped
9005 (Black)
FAR175TSR
17
10
3.2
2.2
V-shaped
7032 (Grey)
FAR225TPN
22
15
3.8
1.8
Flat
9005 (Black)
FAR225TPR
22
15
3.8
1.8
Flat
7032 (Grey)
FAR225TSN
22
15
3.0
2.6
V-shaped
9005 (Black)
FAR225TSR
22
15
3.0
2.6
V-Shaped
7032 (Grey)
0
Flat
9005 (Black)
Accessories - frame fans
elastic rivets
General specifications
• Fast fan mounting and dismounting, vibration and noise reduction
• Material: EPDM rubber, 63 shore A hardness
• Color: black
38.9
Model
Ø 6.5
15.4
Ø3
18.9
EAR4401N
Ø8
Ø 3.8
1.5
Fandis
■
151

Accessories - frame fans

fan power leads
General specifications
• Quick fans power connection or disconnection with standard terminal male plugs
• Plug material: self-extinguishing PVC
• Versions available:
- straight plug connection
- 45° plug connection
• daisy chain plugs for multiple connections
• Other lengths are available on request, subject to quantity
• Cable type: flat flexible wire without sheath, H03VH-H according to CEI 20-20 or equivalent
• Color: black
Technical data
Length of
cable "L"
Model
Description
mm
C24-45
610
45°
C24
610
Straight
C36-45
910
45°
C36
910
Straight
C60
1.520
Straight
Technical specifications
Technical drawing
7.9/8
L (xx)
L
7.9/8
x)
(x
STRAIGHT VERSION
45° VERSION
View from “A”
24.7
“A
”
Technical drawing
6.5
15
152
■
Fandis
45ϒ
34.7
7.9/8
FRAME FANS
Frame Fans Introduction
Fandis
■
153
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising