QuickSpecs
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Overview
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
The HPE Ethernet 10Gb 2-port 560FLR-SFP+ adapter, featuring the next generation of 10Gb Ethernet integration offering a single
chip solution on a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use
with HPE ProLiant Gen8 Rack and Scale-Out servers.
The HPE 560FLR dual-port design is ideal for high performance computing, server virtualization, security, server consolidation, and
other applications requiring highest throughput. The total aggregate throughput of 20Gb meets the needs for customers desiring
highest bandwidth.
The HPE 560FLR supports SR-IOV and enterprise class features such as Receive Side Scaling (RSS), Jumbo frames, PXE boot,
Checksum and segmentation offload, and time stamping (IEEE 1588) along with virtualization features such as VMware NetQueue,
Microsoft VMQ and Intel Virtualization Technology for Connectivity (VT-c).
Models
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Kit contents
•
665243-B21
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Page 1
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Overview
•
•
Quick install card
Product warranty statement
Page 2
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Compatibility
Servers
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DL20 Gen9
DL60 Gen9
DL80 Gen9
DL120 Gen9
DL160 Gen9
DL180 Gen9
DL360 Gen9
DL380 Gen9
DL560 Gen9
DL580 Gen9
Apollo 2000 XL170r Gen9
Apollo 2000 XL190r Gen9
Apollo 4200 Gen9
Apollo 4500-Xl450 Gen9
Apollo 6000-XL230a Gen9
Apollo 6000-XL250a Gen9
NOTE: This is a list of supported servers. Some may be discontinued.
Page 3
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Standard Features
Product Features
•
•
•
•
•
•
•
•
Dual-port 10GbE FlexibleLOM that provides the flexibility to meet growing infrastructure needs.
Industry-leading throughput and latency performance
Up to 40Gb/s bi-directional near line rate throughput
Supports SR-IOV (requires server FW, SW and OS support)
Hardware acceleration and offloads for stateless TCP/IP
Support for Preboot eXecution Environment (PXE)
Supports Wake-on-LAN (at 1 Gb)
NOTE: Wake-on-LAN is supported only on Port 1 from system power state S5.
Improved small packet performance
Integrated PHY and MAC
Dual-port 10
Gigabit Ethernet
Throughput
The HPE 560FLR FlexibleLOM delivers 20Gbps full duplex Ethernet transfer rate per port (40 Gbps
aggregate full duplex), providing the network performance needed to improve response times and alleviate
bottlenecks that impact performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for
high performance computing, database clusters, and more.
Jumbo Frames
The HPE 560FLR FlexibleLOM supports jumbo frames (also known as extended frames), permitting up to a
9.5K byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a
standard 1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput
performance and greater CPU utilization. These attributes are particularly useful for database transfer and
tape backup operations.
DPDK
The HPE 560FLR adapter supports DPDK with benefit for packet processing acceleration and use in NFV
deployments.
802.1Q VLANs
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HPE 560FLR
FlexibleLOM to be separated into multiple virtual NICs for added network segmentation and enhanced
security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast
traffic to within the same VLAN domain also improves performance.
Optimized for
Virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ help meet the performance demands of
consolidated virtual workloads.
Compliant with Single-Root I/O Virtualization (SR-IOV), accommodating multiple Virtual Machines (VMs) to
share single PCIe resources. The HPE 560FLR-SFP+ supports SR-IOV, and requires Firmware, Software and
OS support.
MSI and MSI-X
MSI and MSI-X Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers
by balancing interrupts between CPUs/cores load.
TCP/IP Stateless
Offloading
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These features
optimize host efficiency, leaving the CPU available for other duties.
FlexibleLOM slot
Compatibility
Compatible with HPE FlexibleLOM slot for select HPE ProLiant Gen8 Rack and Scale-Out servers.
Page 4
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Standard Features
Network Adapter
Teaming
The HPE 560FLR FlexibleLOM support for NIC teaming helps IT administrators increase network fault
tolerance and increased network bandwidth, The team of adapters can work together as a single virtual
adapter. The HPE 560FLR provides support for several different types of teaming enabling IT administrators
to optimize availability, improve performance and help reduce costs.
Network Management
Management
Support
The HPE 560FLR FlexibleLOM can be administered from HPE Systems Insight Manager (SIM). The adapters
can be managed individually or in teams, providing SNMP based statistics for reporting purposes. The HPE
560FLR adapter can also be managed by other applications with SNMP support.
Server Integration The HPE 560FLR FlexibleLOM is a validated, tested, and qualified solution that is optimized for HPE ProLiant
servers. Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full
suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems
Insight Manager that simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other venders and
provides users with a single point of contact for both their servers and their network adapters.
Configuration
Utilities
Each HPE 560FLR ships with a suite of operating system-tailored configuration utilities that allow the user to
enable initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft
Windows operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows
environment allow for unattended OS installations.
LED Indicators
The colored LEDs on each port of the HPE 560FLR adapter indicate link status and link activity.
Preboot Execution PXE allows the server to boot over the network and download software residing in the network. The HPE
Environment (PXE) 560FLR supports PXE.
HPE Sea of Sensors Support for HPE's Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity heat - across the server. When temperatures get too high, sensors can kick on fans and make other
3D
adjustments to reduce energy usage. What makes it better is the upgrade from all six fans kicking on at one
time to a new system where only one kicks on - the one in proximity of the area that started heating up - thus
reducing the amount of energy used for cooling.
Active Health
System
Supports HPE Active Health System monitors and records changes in the server hardware and configuration
enabling customers to have accurate information that will assist in diagnosing problems and delivering rapid
resolution when server failures occur.
Warranty
Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year,
limited warranty).
Minimum: One year limited warranty.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/index.aspx#.V4e3tPkrJhE
Page 5
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Service and Support
Service and
Support
HPE Technology Services
HPE Technology Services offers you consultants and support experts to solve your most complex infrastructure
problems. We help keep your business running, boost availability, and avoid downtime.
Protect your business beyond warranty with HPE Care Pack Services
When you buy HPE Options, it's also a good time to think about what level of service you may need. HPE Care
Pack services provide total care and support expertise with committed response choices designed to meet your
IT and business need.
HPE Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industrystandard servers and software. You can choose the type and level of service that is most suitable for your
business needs. New to this portfolio is HPE Collaborative Support. If you are running business critical
environments, Hewlett Packard Enterprise offers Proactive Care or Critical Advantage. These services help you
deliver high levels of application availability through proactive service management and advanced technical
response.
Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For
customized support service solution, Hewlett Packard Enterprise can work with you to tailor a service solution
for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product
Recommended
Services
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an Hewlett Packard Enterprise Authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.1938120508
OR
3-Year HPE 24x7 4 hour Response, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution, and basic
software problem diagnosis, fault isolation, and resolution if available to Hewlett Packard Enterprise. If the
problem is with HPE HW, the representative will arrive on site any time and day of the year to begin hardware
maintenance service within 4 hours of the service request being logged. In case, the issue is with Hewlett
Packard Enterprise or supported third-party software product and cannot be resolved by applying known fixes,
Hewlett Packard Enterprise will contact the third-party vendor and create a problem incident on your behalf.
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and professional
manner
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=5981-9356EN
Related HPE Care Pack Services to enhance your HPE product experience
Related Services
3-Year HPE 24x7 4 hour Response, Proactive Care or Critical Advantage
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue end to
end until resolved, delivering a single point of contact for you
http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1467740454177.125225703.1
Page 6
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Service and Support
OR
3-Year HPE 6-hour Onsite Call-to-Repair, HPE Collaborative Support
Offers customers a single point of contact for server problem diagnosis, hardware problem resolution to return
the hardware in operating condition within 6 hours of the initial service request to the HPE Global Solution
Center, and basic software problem diagnosis, fault isolation, and resolution if available to Hewlett Packard
Enterprise. In case, the issue is with Hewlett Packard Enterprise or supported third-party software product and
cannot be resolved by applying known fixes, Hewlett Packard Enterprise will contact the third-party vendor and
create a problem incident on your behalf.
HPE Proactive Select Service
Provides a flexible way to purchase Hewlett Packard Enterprise best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months. https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=4AA38855ENW&search=4AA3-8855ENW
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04844073
HPE Support
Center
Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with Hewlett Packard Enterprise experts,
access support resources or collaborate with peers.
Learn more https://www.hpe.com/us/en/support.html
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with an Hewlett
Packard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability
Parts and
materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain
the covered hardware product in operating condition, including parts and materials for available and
recommended engineering improvements. Supplies and consumable parts will not be provided as part of this
service; standard warranty terms and conditions apply. Parts and components that have exceeded their
maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this service.
Warranty / Service For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified for the
server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22”
Coverage
and tower UPS products; these items will be covered at the same service level and for the same coverage
period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been
exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction. It does not apply to any exchange of Disk or SSD/Flash
Drives that have not failed. SSD/Flash Drives that are specified by Hewlett Packard Enterprise as consumable
parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in
the manufacturer’s operating manual or the technical data sheet are not eligible for the defective media
retention service feature option.
Page 7
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Service and Support
For more
information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or Hewlett Packard Enterprise Authorized Channel Partner.
Or visit: https://www.hpe.com/us/en/servers
Page 8
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Related Options
Direct Attach Cable HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
NOTE: Direct Attach Cable (DAC) must be purchased separately for copper
environments.
487649-B21
487652-B21
487655-B21
537963-B21
Fiber Optic Modules HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver
NOTE: Fiber transceivers and cables must be purchased separately for fiber-optic
environments.
HPE BladeSystem c-Class Virtual Connect 1G SFP SX Transceiver
HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver
455883-B21
453151-B21
455886-B21
Additional
Supported
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
Fiber Optic Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
NOTE: Fiber transceivers and cables must be purchased separately for fiber-optic
environments.
AJ833A
AJ834A
AJ836A
AJ837A
AJ838A
AJ839A
Page 9
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Technical Specifications
General
Specifications
Network Processor
Data Rate
Bus Type
Form Factor
IEEE Compliance
Power and
Environmental
Specifications
Operating
Power
Emissions
Safety
Other
Intel® 82599 Controller
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical
bandwidth.
PCI Express v2.0 (Gen 2) x8 (FlexibleLOM slot)
FlexibleLOM
802.3, 802.1ab, 802.3x, 802.3ad, 802.1p/ 802.1q, 802.3ae, 802.1Qau
Temperature
32° to 131° F (0° to 55° C)
Humidity
10% to 90% non-condensing
<12W
USA: FCC Part 15 Class A; Canada: ICES=--3, Issue 4; Japan: VCCI V3 (2010.04) Class
A; International: EN55022:2006 + A1:2007 Class A; International:
EN55024:1998+A1:2011+A2; EN61000-3-2:2006, EN61000-3-3:2008; Taiwan:
BSMI, CNS13438 (2006) Class A; Australia/New Zealand (AS/NZS):
EN55022:2006+A12007 class A; Korea: KN22 Class A, KN24
6 of 6
UL Mark (USA and Canada)
CE Mark
EN 60590
Operating System
Support
Microsoft Windows Server 2008, Server 2008R2, Server 2012 and HPC Server 2008, 32 and 64-bit
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux 5.x and 6.0
SLES 10 and 11
VMware 4.0 and 4.1
VMware ESX/ESXi 4.1 and ESXi 5.0
vSphere 6.5
Solaris 10
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & BladeSystem
Server Linux matrix:
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/redhat_linux.aspx#.V4e8tPkr
JD8
Environmentfriendly Products
and Approach
End-of-life
Management and
Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: https://www.hpe.com/us/en/living-progress.htmlTo
recycle your product, please go to: https://www.hpe.com/us/en/livingprogress.html or contact your nearest Hewlett Packard Enterprise sales office.
Products returned to Hewlett Packard Enterprise will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at https://www.hpe.com/us/en/living-progress.html.
These instructions may be used by recyclers and other WEEE treatment facilities as
well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett
Page 10
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Related Options
Packard Enterprise equipment.
Page 11
QuickSpecs
HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
Summary of Changes
Date
10-Feb-2017
07-Oct-2016
23-Jan-2016
Version History
From Version 9 to 10
From Version 8 to 9
From Version 7 to 8
Action
Changed
Changed
Changed
Removed
13-Jun-2014
10-Sep-2013
From Version 6 to 7
From Version 5 to 6
Changed
Changed
09-Aug-2013
From Version 4 to 5
Changed
05-Jul-2013
From Version 3 to 4
Changed
15-Mar-2013
01-Mar-2013
From Version 2 to 3
From Version 1 to 2
Changed
Added
Description of Change
Compatibility and Technical Specifications sections were updated.
Add DPDK support. Obsolete SKUs were deleted.
Compatibility and Related Options sections were updated.
Obsolete SKUs were deleted:
221692-B21, 412648-B21, 458492-B21, 221692-B22, 435508-B21,
468332-B21, 221692-B23, 394791-B21, 489892-B21, 221692-B26,
394793-B21, 581201-B21, 221692-B27, 538696-B21, 503746-B21
Cables was revised in Related Options.
Compatibility, 10 Gigabit Server Adapters, and FlexbleLOM Adapters
were revised
Changes made to:
Overview
Compatibility - Servers
Standard Features - Product Features, Optimized for Virtualization
HPE BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option
Kit and HPE BladeSystem c- Class 10Gb Long Range Small Form
Factor Pluggable Option were added to Fiber Optic Modules
Additional Support was added to Related Options
HPE X240 Direct Attach Copper Cables was removed from Direct
Attach Cable
HPE X240 QSFP+ 4x10G SFP+ 1m DAC Cable was removed from
Cables
Updated the Product Features Section
The following was added to the Related Options Section:
Cables
(Plug into HPN5900)
Additional Supported Cables
(Plug into HPN6600)
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04111435 - 14479 - Worldwide - V10 - 10-February-2017
Page 12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising