1-88 8 - 9 9 6 - 2 7 2 9 F AX: 1-866-873-3535

1-88 8 - 9 9 6 - 2 7 2 9 F AX: 1-866-873-3535
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-888-996-2729
FAX: 1-866-873-3535
gameroom@escaladesports.com
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Please have your model number when inquiring about parts.
When contacting Escalade Sports please provide your model number, date code (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
M01482RD
2-M01482RD-BS
Your Model Number:
Date Code:
Purchase Date:
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
All Rights Reserved
© 2014 Escalade Sports
1
For Customer Service Call 1-888-996-2729
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO (2) ADULTS ARE REQUIRED TO ASSEMBLE
THIS BASKETBALL DOUBLE SHOOTOUT
Tools Needed:
Wrenches T1 and T2 (Included with the Hardware Kit)
Philips Screwdriver
Adjustable Wrench or Socket Set is helpful but not required.
IMPORTANT !
Make sure you understand the following tips before you begin to assemble your
basketball double shootout.
1. This game ( Mechanical Scoring ) can be played outdoors - but must be stored
indoors.
2. Tighten hardware as instructed.
3. Do not over tighten hardware,as you could crush the tubing.
4. Some drawings or images in this manual may not look exactly like your product.
5. To prevent damage to the electronics, do not place this unit any
closer than six inches (6”) from the wall.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS BASKETBALL
DOUBLE SHOOTOUT TOGETHER.
All Rights Reserved
© 2014 Escalade Sports
2
For Customer Service Call 1-888-996-2729
HARDWARE IDENTIFIER
(To Scale)
H1 - M6 x 25mm
Allen Head Bolt (16)
H2 - M6 x 55mm
Allen Head Bolt (4)
H3 - M6 x 73mm
Allen Head Bolt (4)
H4 - M6 x 45mm
Allen Head Bolt (8)
(Not to Scale)
H5 - M6 Flat
Washer (64)
All Rights Reserved
© 2014 Escalade Sports
H6 - M6
Locknut (32)
T1 - Allen
Wrench (1)
3
cale)
(Not to S
T2 - Wrench (1)
For Customer Service Call 1-888-996-2729
PARTS IDENTIFIER (Not to Scale)
P1R - Right Back Bottom Support Tube
with Locking Pin installed (1)
P1L - Left Back Bottom Support Tube
with Locking Pin installed (1)
P2 - Middle Back Upright Tube (2)
P3L - Left Lower Back Upright Tube (1)
P3R - Right Lower Back Upright Tube (1)
P4 - Front Support Tube (2)
P5 - Front Upright Tube (2)
P6 - Connect Tube (2)
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.
P7 - Base Tube Upright with Leg Cap installed (2)
All RIghts Reserved.
© 2014 Escalade Sports
4
For Customer Service Call 1-888-996-2729
PARTS IDENTIFIER (Not to Scale)
P8 - Front U-Tube with
EVA Pads installed (1)
P9 - Top Tube (2)
P10 - Cross Support Tube (2)
(Factory Installed)
P11 - Backboard (1)
P12 - Rim (2)
P14 - Rim
Support Plate (2)
P15 - Electronic
Scoreboard (1)
!
All RIghts Reserved.
© 2014 Escalade Sports
P13 - Rim Net (2)
P16 - Control Panel (1)
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.
5
For Customer Service Call 1-888-996-2729
PARTS IDENTIFIER (Not to Scale)
P17 - Mechanical
Scoring Arm (2)
P18 - Ramp Net (1)
ACCESORY IDENTIFIER (Not to Scale)
A2 - Basketball (6)
A1- Air Pump w/ Needle (1)
!
All RIghts Reserved.
© 2014 Escalade Sports
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.
6
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
1 pc - P11 Backboard
1 pc - P15 Electronic Scoreboard
3 pcs - AA Batteries (not included)
1. Locate four(4) pieces Phillips Head Screws, P15 Electronic Scoreboard from the box.
2. Peel protective coating from P15 Electronic Scoreboard as shown in FIGURE 1.
Note inset, back view. Install 3 "AA" batteries into electronic scorer.
3. Attach P15 Electronic Scoreboard to P11 Backboard using four pieces Phillips Head Screws as
shown in FIGURE 1.
P11
Phillips Head Screw
NOTE:
Peel protective
coating.
P15
FIGURE 1
All Rights Reserved.
© 2014 Escalade Sports
7
For Customer Service Call 1-888-996-2729
16 pcs - H1 Allen Head Bolt
32 pcs - H5 Flat Washer
16 pcs - H6 Lock Nut
2 pcs - P12 Rim
PARTS REQUIRED:
2 pcs - P13 Rim Net
1 pc - T1 Allen Wrench
2 pcs - P14 Rim Support Plate
1 pc - T2 Wrench
2 pcs - P17 Mechanical Scoring
Arm
4. Attach P12 Rims to P11 Backboard using H1 Bolts, H5 Flat Washers, P14 Rim Support Plates and
H6 Lock Nuts as shown in FIGURE 2. P14 Rim Support Plates attaches to the back of backboard
as per diagram. Use T1 Allen Wrench and T2 Wrench to tighten H1 Bolts and H6 Lock Nuts.
P11
H6 H5
FIGURE 2
T2
H5
P14
H1
T1
P12
5. Attach P17 Mechanical Scoring Arms to P11 Backboard using H1 Bolts, H5 Flat Washers and
H6 Lock Nuts as shown in FIGURE 3. Use T1 Allen Wrench and T2 Wrench to tighten H1 Bolts
and H6 Lock Nuts.
Connect P17 Scoring Arm plugs to the back side of P15 Electronic Scoreboard as shown.
6. Place P13 Rim Nets on P12 Rims as shown in FIGURE 4.
Scoring
Arm
Plug
P12
P11
FIGURE 4
Place Net P13
on Rim P12
Backside
of Electronic
Scoreboard
On / Off Switch
is located under
the electronic
scoreboard
H6 H5
P13
T2
NOTE:
Scoring Arm plug
through the hole
on the backboard.
All Rights Reserved.
© 2014 Escalade Sports
T1
FIGURE 3
P17
8
H5
H1
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
2 pcs - H4 Allen Head Bolt
1 pc - P3L Left Lower Back Upright Tube
4 pcs - H5 Flat Washer
1 pc - P3R Right Lower Back Upright Tube
2 pcs - H6 Lock Nut
2 pcs - P4 Front Support Tube
2 pcs - P2 Middle Back Upright Tube
2 pcs - P5 Front Upright Tube
7. Snap P3L and P3R Tubes to P2 Tubes using spring locks as shown in FIGURE 5.
8. Snap P4 Tubes to P5 Tubes using spring locks as shown in FIGURE 5.
9. Install P4/P5 Tubes assembly to P2/P3L and P2/P3R Tubes assembly using H4 Bolts, H5 Flat
Washers and H6 Lock Nuts as shown in FIGURE 5.
IMPORTANT NOTE: Do not tighten H4 Bolts on this time.
H4
H5
H5
P4
H5
H6
H6
H4
H5
NOTE:
Spring lock must
be in this position
for correct assembly.
NOTE:
P2
Spring lock must
be in this position
for correct assembly.
P2
P4
FIGURE 5
P5
P5
P3L
(Left)
P3R
(Right)
NOTE:
Spring lock must
be in this position
for correct assembly.
NOTE:
Spring lock must
be in this position
for correct assembly.
All Rights Reserved.
© 2014 Escalade Sports
9
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
4 pcs - H3 Allen Head Bolt
1 pc - P1L Left Back Bottom Support Tube
8 pcs - H5 Flat Washer
1 pc - P1R Right Back Bottom Support Tube
4 pcs - H6 Lock Nut
1 pc - T1 Allen Wrench
1 pc - T2 Wrench
10. Install P1L and P1R Tubes to P3L and P3R Tube using H3 Bolts, H5 Flat Washers and H6 Lock
Nuts as shown in FIGURE 6. Do not tighten H3 Bolts on this time.
11. Install P1L and P1R Tubes to P5 Tube using H3 Bolts, H5 Flat Washers and H6 Lock Nuts as
shown in FIGURE 6. Do not tighten H3 Bolts on this time.
12. Snap P1R Tube to P1L Tube using spring lock as shown in FIGURE 6.
13. Use T1 Allen Wrench and T2 Wrench to tighten H3 Bolts, H4 Bolts and H6 Lock Nuts on this time.
H4
H4
FIGURE 6
NOTE:
Spring lock must
be in this position
for correct assembly.
P3R
(Right)
P1R
(Right)
H3
H5
H5
P5
H5 H6
H5
H6
P3L
(Left)
H6
H3
H3
P1L
(Left)
H6
H5
H5
C1
H5
H5
H3
All Rights Reserved.
© 2014 Escalade Sports
C1
P5
10
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
2 pcs - H4 Allen Head Bolt
2 pcs - H6 Lock Nut
4 pcs - H5 Flat Washer
2 pcs - P6 Connect Tube
14. Install P6 Tubes to P1L and P1R using H4 Bolts, H5 Flat Washers and H6 Lock Nuts as shown
in FIGURE 7.
Note: This is a pivot point. “Snug” tighten H6 Lock Nuts only. Make sure this assembly
pivots freely.
P1R (Right)
H4
H5
FIGURE 7
H6
H5
P6
H4
P1R
(Right)
P1L
(Left)
H6
H6
H5
H5
P6
H5
H4
P6
H5
P1L (Left)
H5
H4
H6
H5
P6
All Rights Reserved.
© 2014 Escalade Sports
11
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
2 pcs - P7 Base Tube Upright
1 pc - P8 Front U-Tube
15. Snap P7 Tubes to P6 Tubes using spring locks as shown in FIGURE 8.
16. Snap P8 Tube to P7 Tubes using spring locks as shown in FIGURE 8.
C3
FIGURE 8
P8
P6
Spring
Lock
Spring
Lock
Spring
Lock
Spring
Lock
P6
P7
C2
P7
C2
All Rights Reserved.
© 2014 Escalade Sports
12
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
4 pcs - H2 Allen Head Bolt
2 pcs - H4 Allen Head Bolt
12 pcs - H5 Flat Washer
6 pcs - H6 Lock Nut
2 pcs - P9 Top Tube
1 pc - P10 Cross Support Tube
1 pc - P18 Ramp Net
1 pc - T1 Allen Wrench
1 pc - T2 Wrench
17. Install P10 Cross Support Tube to P2 Tubes using H4 Bolts, H5 Flat Washers and H6 Lock Nuts
as shown in FIGURE 9. Do not tighten Bolts on this time.
18. Slide P18 Ramp Net into P9 Top Tube as shown in FIGURE 9.
19. Attach Backboard assembly to the frame. With the help of another adult, start at top hole, place
a H5 Flat Washer on a H2 Bolt, pass the bolt through P11 Backboard and P9 Tube, place H5 Flat
Washer on the bolt and secure with a H6 Lock Nut as shown in FIGURE 9. Repeat for other
side. Do not tighten Bolts on this time.
At each bottom hole of the backboard, repeat the above procedure except bring the ramp up
behind the P10 Tube, place the ramp tabs over H2 Bolt and attach with H5 Washer and H6 Lock
Nut as shown in FIGURE 9.
Tighten all Bolts & Nuts using T1 Allen Wrench and T2 Wrench.
Note:
Place P11 Backboard
front of P19 Tubes.
P18
P9
FIGURE 9
H6
H6
H5
H5
H5
H5
H6
H5
H4
H5
H2
H2
P10
H5
H5
H6
Note:
Place P18 Ramp Net
behind P10 Tube.
All Rights Reserved.
© 2014 Escalade Sports
P18
H5
Ramp Tab on
backside of
P9 Tube.
H6
P9
P11
H4
13
H5
H6
P2
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
2 pcs - H4 Allen Head Bolt
1 pc - P10 Cross Support Tube
4 pcs - H5 Flat Washer
1 pc - T1 Allen Wrench
2 pcs - H6 Lock Nut
1 pc - T2 Wrench
20. Slide P10 Cross Support Tube through sleeve on the front of the ramp net, attach P10 Tube to
P8 Front U-Tube using H4 Bolts, H5 Flat Washers and H6 Lock Nuts as shown in FIGURE 10.
Use T1 Allen Wrench and T2 Wrench to tighten H4 Bolts and H6 Lock Nuts.
21. Secure the Velcro Straps (front of the ramp net) around the P8 Front U-Tube as shown
in FIGURE 10.
H6
P8
H5
H4
P10
P18
H5
FIGURE 10
All Rights Reserved.
© 2014 Escalade Sports
14
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
1 pc - P16 Control Panel
22. Attach P16 Control Panel to the middle of P8 Front U-Tube as shown in FIGURE 11.
23. Feed the wire from P16 Control Panel through the loops on the left side of P18 Ramp Net and
connect to the back of P15 Electronic Scoreboard as shown in FIGURE 11 and DETAIL A.
Back
of Bac
kboar
d
P16 Control
Panel Plug
NOTE:
P15 Electronic
Scoreboard
P16 Control Panel Plug
connect to the back of
P15 Electronic Scoreboard.
DETAIL A
P16 Control
Panel Cord
P16
P8
FIGURE 11
All Rights Reserved.
© 2014 Escalade Sports
15
For Customer Service Call 1-888-996-2729
TO PLAY:
Use locking pin to lock
the ramp in play position.
TO STORAGE:
Use locking pin to lock
the ramp in folded position.
FIGURE 12
Congratulations! You have now assembled your Double Shootout.
Please note the Care and Use instructions below.
CARE AND USE OF YOUR SHOOTOUT
1. Product can be used OUTDOORS - but must be stored INDOORS.
2. DO NOT sit, climb or lean on the unit.
3. DO NOT drag the unit when moving it, This will damage the legs.
4. DO NOT place backside of this product against wall as during play, the backside
of product could become damaged or your wall could become damaged.
All Rights Reserved.
© 2014 Escalade Sports
16
For Customer Service Call 1-888-996-2729
USE OF YOUR SHOOTOUT:
Insert 3(three) pieces “AA” batteries at the backside of electronic scoreboard.
Plug the mechanical scoring arm plug into backside of the electronic scoreboard.
Plug the control panel plug into backside of the electronic scoreboard.
Press on/off button at the bottom backside of the electronic scoreboard to play and stop the game.
CONTROL PANEL BUTTON:
ON/OFF:
SELECT UP:
SOUND:
PAUSE:
PLAY:
SELECT DOWN:
Press ON/OFF button to turn on the game.
Long press ON/OFF button to turn off the game.
Press SELECT UP button to select the game options
from 01 to 08 game options, players and time.
Press SOUND button to turn on and turn off
the game sound.
Press PAUSE button to pause the game.
Press SELECT DOWN button to select the game
options from 08 to 01 game options, players and time.
Press PLAY button to confirm the game options,
player options, time and start the game.
RESET:
Long press RESET button to reset the game.
PRODUCT PARTS LIST
PARTS
01482RDBSH1
01482RDBSH2
01482RDBSH3
01482RDBSH4
01482RDBSH5
01482RDBSH6
01482RDBST1
01482RDBST2
01482RDBSP1L
01482RDBSP1R
01482RDBSP2
01482RDBSP3L
01482RDBSP3R
01482RDBSP4
01482RDBSP5
01482RDBSP6
01482RDBSP7
01482RDBSP8
01482RDBSP9
01482RDBSP10
01482RDBSP11
01482RDBSP12
01482RDBSP13
01482RDBSP14
01482RDBSP15
01482RDBSP16
01482RDBSP17
01482RDBSP18
01482RDBSA1
01482RDBSA2
01482RDBSC1
01482RDBSC2
01482RDBSC3
01482RDBSK1
01482RDBSM1
All Rights Reserved.
© 2014 Escalade Sports
KEY#
H1
H2
H3
H4
H5
H6
T1
T2
P1L
P1R
P2
P3L
P3R
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
A1
A2
C1
C2
C3
K1
M1
M01482RD
DESCRIPTION
QTY.
M6 x 25mm Allen Head Bolt
M6 x 55mm Allen Head Bolt
M6 x 73mm Allen Head Bolt
M6 x 45mm Allen Head Bolt
M6 Flat Washer
M6 Lock Nut
Allen Wrench
Wrench
Left back Bottom Support Tube with Locking Pin installed
Right Back Bottom Support Tube with Locking Pin installed
Middle Back Upright Tube
Left Lower Back Upright Tube
Right Lower Back Upright Tube
Front Support Tube
Front Upright Tube
Connect Tube
Base Tube Upright with Leg Cap installed
Front U-Tube with EVA Pads installed
Top Tube
Cross Support Tube
Backboard
Rim
Rim Net
Rim Support Plate
Electronic Scoreboard
Control Panel
Mechanical Scoring Arm
Ramp Net
Air Pump with Needle
Basketball
Locking Pin
Leg Cap
EVA Pad
Hardware Kit
Owner’s Manual
17
16
4
4
8
64
32
1
1
1
1
2
1
1
2
2
2
2
1
2
2
1
2
2
2
1
1
2
1
1
6
2
2
2
1
1
For Customer Service Call 1-888-996-2729
90 DAY LIMITED WARRANTY
This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS
Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser
that any Product of its manufacture is free from defects in material and workmanship when used
for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMANSHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS
shall repair or replace with a comparable model, and Product, or component thereof, which may
prove defective under normal use and proper care, and which our examination shall disclose to
our satisfaction to be thus defective, please contact our Warranty Dept.
1-888-996-2729 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at:
gameroom@escaladesports.com
Other than shipping requirements no charge will be made for such repair or replacement of inwarranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for
value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or
incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
All Rights Reserved.
© 2014 Escalade Sports
18
For Customer Service Call 1-888-996-2729
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising