Quick Start Guide
Quick Start Guide
Connections
Initial Setup
Initial Setup
On the TV remote control, press the Source/Input
button* to switch to the HDMI input where this
device is connected.
HDMI1
Connection to a TV
* The button name may vary on the TV brand model.
MBP1500
Power Button
P
See the Online Owner’s Manual for details:
www.magnavox.com/support/
Step
Step
Step
Step
1
2
3
4
Press
on Remote Control of your Blu-ray Player, and then “Language” screen will be displayed on the TV.
If “Langguage“ screen is not displayed, check if the correct HDMI input is selected on the TV.
Please visit website www.magnavox.com/support/
Select Download.
Type in the Model # “MBP1500” and click “Search”.
Select the Manual, and click on “Download”.
HDMI cable
(not included)
Register Online at www.magnavox.com/support/ today to get the most benefits
from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits
such as software upgrades and important product notifications.
Register Online at www.magnavox.com/support/
1
2
To start Initial Setup, select your
language.
3
Set “Voice Guide” to complete your
Blu-ray Player.
Language
AC plug
Please Wait...
MAGNAVOX is a registered trademark of Koninklijke Philips
N.V. and is used under license from Koninklijke Philips N.V.
For product recycling information, please visit - www.magnavox.com/support/
Voice Guide
Please select your language for on-screen
display.
If you want use the Voice Guide function,
please set to “English” or “Español”
Switch Voice Guide On or Off. Sets On the
Voice Guide, “Audio Output” setting will set to
“LPCM” automatically. If Voice Guide is On, it
will not be able to set the “Audio Output”.
English
On
Español
Off
Français
Click on
Return
Return
Included Accessories
© 2016 Funai Electric Co., Ltd.
Printed in Philippines
ECS01UL
2VMN00316 ★★★★★
• Remote Control (NC093UL)
• Quick Start Guide
Remote Control
1
2
14
15
3
Problem
T ip
1
Press to Turn On the unit, or to switch the unit into Standby mode. (To completely Turn Off the
unit, you must unplug the AC power cord.)
No power.
2
During Playback (Blu-ray Disc™ or DVD), press to select the Menu (Top menu or Pop menu/
menu).
• Check the AC power cord, if it is properly connected.
• Unplug the AC power cord, and wait for about 5-10 seconds. Plug it back in and attempt to Power On the unit.
No sound or picture.
• Make sure both the TV and Blu-ray Disc™ player are Turned On.
• Confirm the connections to the TV are made properly as shown in CONNECTIONS.
• Check to see whether the connected TV or another device supports HDCP. (This unit will not output a video signal unless the other
device supports HDCP.)
No reaction to the remote
control.
• Confirm that the player’s AC power cord is plugged into a power outlet.
• Check the batteries in the remote control, and make sure they are inserted properly by + or - symbols.
• Aim the remote at the unit’s remote receiver. Then press any arrow key and confirm the Power-On indicator dims and blinks when a
remote button is pushed. This confirms that unit is receiving the remote IR signal.
12
13
Troubleshooting
3 Press to select items or settings.
4 Press to display the Number Select Menu or the Search menu.
5 During playback, press to Fast Reverse the playback.
6 Press to start playback or resume playback.
During playback, press once to return to the beginning of the current Title, Chapter, Track
or File.
During playback, press twice to return to the previous Title, Chapter, Track or File.
During the JPEG playback, press to return to the previous File.
4
16
7
5
6
7
8
9
10
11
17
8 Press to Stop playback.
No high-definition video signal
on the TV screen.
• Does the disc contain high-definition video and the TV support it? High-definition video is only available when the disc
contains it and the TV supports it.
9 Press to Display the on-screen display menu.
Distorted picture.
• Sometimes a small amount of picture distortion may appear. This is not a malfunction.
No sound or distorted sound.
•
•
•
•
Cannot play back a disc.
• Make sure that the product supports the disc.
• Check the region code of the disc. This unit supports the following region codes.
- Blu-ray Disc™: “A”
- DVD: “ALL” or “1”
• Clean the disc.
18
19
20
21
10 Press to select Repeat mode.
Press to activate shortcut keys on some BD-video functions. When a file list is shown, press
11
to switch between pages.
12 Press to Open or Close the disc tray.
13 Press to display the Home Menu.
INSERT BATTERIES
Install 2 AAA (1.5V) batteries (not included)
14 During playback, press to display the Play Menu.
15 Press to confirm or select menu items.
16 Press to Return to the previously displayed menu or screen function.
1
2
3
17
During playback, press to Fast Forward the playback.
When playback is in pause, press to Slow Forward the playback.
18
During playback, press to Skip to the next Chapter, Track or File.
When playback is in pause mode, press to Forward the playback picture by picture.
19 Press to Pause playback.
20 Press to select the Audio Channel (such as audio languages) on a disc.
NOTE(S):
•Do not mix old and new batteries.
•Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, Li-ion, etc.) batteries.
Adjust the volume.
Check the HDMI connection as necessary.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter which does not handle Digital sound.
Check the settings in “Audio Out” menu.
If you do not find a solution above, please visit our website www.magnavox.com for the Online Owner’s Manual.
Please download it and then refer to “TROUBLESHOOTING” section for more information. If additional support is required, please
contact our Customer Service at 1-866-341-3738.
Servicing
21 Press to select Subtitles on a disc.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Eject the
disc (if possible), disconnect the USB Memory Stick (if connected), place the unit into standby mode, unplug the power plug, and then
please visit: www.magnavox.com/support// or contact: 1-866-341-3738
Safety Instructions
The model and serial numbers of this unit may be found on the cabinet. You
should record and retain those numbers for future reference. Please refer to
the LIMITED WARRANTY for more information.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The important note and rating are located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the manual. The user could lose the authority
to operate this equipment if an unauthorized change or modification is made.
Disconnect the mains (AC) plug to shut the unit Off when trouble is found or
when not in use. The mains (AC) plug shall remain readily available.
To completely turn Off the unit, you must unplug the mains (AC) power cord.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service
person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
Use of controls or adjustments or performance of
CAUTION:
procedures other than those specified herein may result in
hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of
discs are prohibited. This item incorporates copy protection technology that
is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
In order to avoid interruption of ventilation, this unit should not be placed
in built-in equipment such as a book cabinet, rack, etc., and the vents of
this unit should not be covered with anything such as a tablecloth, curtain,
newspaper, etc. Make sure to leave a space of 5.9 inches (15cm) or more
around this apparatus.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
When installing this unit in a temperate environment, avoid a place with
rapid temperature changes.
This unit should not be used in a tropical environment as it has not been
evaluated under such conditions.
No objects should be placed directly on or under this unit, especially lighted
candles or other flaming objects.
®
is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money and
protect the environment through energy efficient
products and practices.
Disposal of Used Batteries
In many areas Batteries may not be disposed of with your household waste.
Please ensure you dispose of Batteries according to local Regulations.
Trademark Information
“Blu-ray Disc™”, “Blu-ray” and “Blu-ray
Disc™” logo are trademarks of the Blu-ray
Disc Association.
“BONUSVIEW™” and “BONUSVIEW™” logo are
trademarks of the Blu-ray Disc Association.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.
WARNING:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (Battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Do not place the unit on the furniture that is capable of being tilted by
a child and an adult leaning, pulling, standing or climbing on it. A falling
unit can cause serious injury
j y or even death.
“x.v.Color” and “x.v.Color” logo are
trademarks of Sony Corporation.
Logo Licensing Corporation.
“AVCHD” and the “AVCHD” logo are
trademarks of Panasonic Corporation and
Sony Corporation.
CAN ICES-3 (B)/NMB-3(B)
CAUTION:
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
For DTS patents, see http://patents.dts.
com. Manufactured under license from DTS
Licensing Limited.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
Java and all Java based
trademarks and logos are
trademarks or registered
trademarks of Oracle
and/or its affiliates.
Instrucciones de Seguridad
Limited Warranty
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in
materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge
for one (1) year from the date of original retail purchase. Certain parts are
excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90)
days from the date of original retail purchase.
Note: Any product sold and identified as refurbished or renewed carries a ninety (90)
days labor and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER
WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered,
replaced, defaced, missing or if service was attempted by an unauthorized service center.
This limited warranty does not apply to any product not purchased and used in the United
States and Canada.
This warranty only covers failures due to defects in material or workmanship which occur
during normal use. It does not cover damage which occurs in shipment, or failures which
are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage,
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty
installation, improper maintenance, commercial use such as hotel, rental or office use
of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR
FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES
ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED
BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED
SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED
SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL
PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT
BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY
PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT,
PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight
prepaid, in either its original packaging or packaging affording an equal degree of
protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for
any service done by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Tel: 1-866-341-3738
www.magnavox.com/support/
19900 Van Ness Ave., Torrance CA 90501
Playable Media and Format
Media
• BD-RE/-R
• DVD-video
• DVD-RW/-R
• BD-video
• CD-DA
• CD-RW/-R
• DTS-CD
• USB Memory Stick
Disc and USB Memory Stick Playable Format
• JPEG
• AVCHD (only for DVD)
License
This product includes some open source software that is subject to the GNU
General Public License (GPL), GNU Lesser General Public License (LGPL)
and/or copyright licenses, disclaims and notices. You can confirm further
information about these in the “OSS” section in “Settings” of this product. If
you are interested in obtaining GPL source code used in this product, please
contact
FUNAI SERVICE CORPORATION
2200 Spiegel Drive, Groveport, OH 43125
funaioss@funaiservice.com
anotar y guardar el modelo y el número de seriepara consultarlos, si los necesita, en el
futuro. Por favor consulte la LIMITED WARRANTY para mayor información.
Número de modelo:
Número de serie:
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE Q
QUE SE PRODUZCA UN INCENDIO O SE RECIBA
UNA DESCARGA ELÉCTRICA,, NO EXPONGA ESTE APARATO A LA LLUVIA NI A
LA HUMEDAD. NO SE DEBERÁ EXPONER EL APARATO NI A GOTERAS NI A
SALPICADURAS,, Y NO DEBERÁ COLOCARSE NINGÚN OBJETO Q
QUE CONTENGA
LÍQUIDOS SOBRE EL APARATO, COMO POR EJEMPLO JARRONES.
AVISO:
PARA REDUCIR EL RIESGO DE SUFRIR UNA DESCARGA ELÉCTRICA NO QUITE
LA CUBIERTA (O EL PANEL POSTERIOR). EN EL INTERIOR DEL APARATO NO
HAY PIEZAS QUE DEBA MANIPULAR EL USUARIO. SOLICITE EL SERVICIO DE
REPARACIONES AL PERSONAL DE SERVICIO CUALIFICADO.
Las notas importantes y la calificación se encuentran ubicadas en la parte posterior o inferior del gabinete.
El símbolo del rayo con punta de flecha, en el interior de un triángulo
equilátero, tiene la finalidad de avisar al usuario de la presencia de
“tensión peligrosa” dentro de la caja del aparato que podría ser de
suficiente intensidad como para constituir un riesgo para las personas
en caso de que éstas recibiesen una descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero tiene la finalidad de
avisar al usuario de la presencia de instrucciones de utilización y mantenimiento
(servicio) en el material impreso que acompaña al aparato.
Símbolo de CLASE ll (doble aislamiento)
IMPORTANTES
INSTRUCCIONES DE SEGURIDAD
1. Lea estas instrucciones.
2.
3.
4.
5.
6.
7.
Conserve estas instrucciones.
Preste atención a las advertencias.
Siga todas las instrucciones.
No utilice este aparato cerca del agua.
Limpie el aparato sólo con un paño seco.
No obstruya ninguna de las ranuras de ventilación. Realice la
instalación según las instrucciones del fabricante.
8. No instale el equipo cerca de elementos para calefaccionar tales como
radiadores, rejillas de calefacción, estufas eléctricas u otros aparatos
(incluidos amplificadores).
9. No desarme el dispositivo de seguridad del enchufe polarizado o con
conexión a tierra. Un enchufe polarizado contiene dos clavijas, una más
ancha que otra. Un enchufe con conexión a tierra contiene dos clavijas y una
tercera clavija con conexión a tierra. La clavija ancha del enchufe polarizado
o la clavija de conexión a tierra representan dispositivos de seguridad. Si el
enchufe del aparato no entra en el tomacorriente, consulte con un electricista
para reemplazar sus antiguos tomacorrientes.
10. Asegúrese de proteger el cable de alimentación de las pisadas o
torsiones especialmente en la zona de la clavija, en el receptáculo y
en el punto donde el cable sale del aparato.
11. Utilice únicamente los accesorios que especifica el fabricante.
12. Utilice únicamente el carro, atril, trípode,soporte o la
mesa que especifica el fabricante o que se vendió junto
con el aparato. Cuando utilice un carro, sea cuidadoso al
trasladar el conjunto carro/aparato para evitar daños por
caídas de objetos.
13. Desenchufe este aparato si hay tormentas eléctricas o
durante largos períodos de inactividad.
14. Confíe el servicio técnico sólo a personal calificado. El servicio técnico es
necesario cuando el aparato sufre algún tipo de daño, por ejemplo cuando
se dañan los cables de suministro eléctrico o la clavija, cuando se derrama
líquido o se caen objetos sobre el aparato, cuando se lo expone a la lluvia o
a humedad, cuando no funciona adecuadamente o cuando se cae.
No coloque la unidad sobre un mueble que pueda volcar si algún niño o adulto
lo inclina, empuja, se coloca encima o trepa por él. La caída de la unidad
puede provocar lesiones graves e incluso la muerte.
Para evitar la interrupción de ventilación, esta unidad no se debe colocar en equipo
integrado tal como un gabinete de libros, bastidor, etc., y las ventilas de esta unidad
no se deben cubrir con nada como una tela, cortina, periódico, etc. Asegúrese de
dejar un espacio de 5,9 pulgadas (15 cm), o más, alrededor del aparato.
Nunca use un desempolvador a gas en esta unidad.
El gas del interior de la unidad puede inflamarse y explotar.
Cuando instale esta unidad en un ambiente templado, evite un lugar con cambios rápidos de temperatura.
Esta unidad no se debe usar en una ambiente tropical ya que no se evaluó bajo tales condiciones.
No se deben colocar objetos directamente sobre o debajo de esta unidad, en
especial velas encendidas o otros objetos con flama.
Eliminación de Baterías Usadas
En muchas áreas no se pueden eliminar baterías junto con los desechos
domésticos. Asegúrese de eliminar las baterías según las normativas locales.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising