MBP1500 - Magnavox
Owner’s Manual
ES INSTRUCCIONES SIMPLIFICADAS
INCLUIDOS EN ESPANOL.
MBP1500
Blu-ray Disc™ / DVD Player
© 2017 Funai Electric Co., Ltd.
CONTENTS
INTRODUCTION .............................................. 3
SETUPS........................................................ 35
Safety Instructions .................................................. 3
Included Accessories .............................................. 4
fun-Link (HDMI CEC) .............................................. 35
HDMI Video Resolution ......................................... 36
Parental ............................................................... 37
Software Update ................................................... 39
Voice Guide .......................................................... 40
Restore Default Settings ....................................... 40
FEATURES ...................................................... 5
Features ................................................................ 5
Product Info............................................................ 6
Symbols Used in this Owner’s Manual ...................... 6
TROUBLESHOOTING...................................... 41
FUNCTIONAL OVERVIEW ................................. 7
Front Panel ............................................................. 7
Rear Panel ............................................................. 7
Remote Control ...................................................... 8
Guide to On-Screen Display ................................... 10
LANGUAGE CODE LIST .................................. 44
CONNECTIONS ............................................. 11
TRADEMARK INFORMATION ......................... 47
Connection to a TV ............................................... 11
Connection to an Audio System ............................. 12
HDMI Audio Output ............................................... 13
GLOSSARY ................................................... 48
SPECIFICATIONS .......................................... 45
MAINTENANCE ............................................. 46
LIMITED WARRANTY .................................... 50
BEFORE YOU START ..................................... 14
ESPAÑOL ..................................................... 51
Finding a Viewing Video Source Input on Your TV ..... 14
Initial Setup.......................................................... 14
Mando a Distancia ................................................ 51
Encontrar el Canal de Video en su Televisor ............ 52
Instalacion Inicial .................................................. 53
Garantía Limitada ......................................back cover
INFORMATION ON PLAYBACK ....................... 16
Information on Playback ........................................ 16
Guide to File List .................................................. 19
How to Insert a Disc ............................................. 19
BASIC PLAYBACK ......................................... 20
Playing Back a Disc ............................................... 20
Playing Back Contents from a USB Memory Stick .... 21
Using the Title / Disc / Pop Menu ......................... 22
SPECIAL PLAYBACK ..................................... 23
Fast Forward / Fast Reverse .................................. 23
Slow Forward Playback .......................................... 23
Step by Step Playback ........................................... 23
Repeat Playback ................................................... 24
Slide Show ........................................................... 24
PiP (BONUSVIEW™) Setting ................................... 25
T itle / Chapter Search .......................................... 26
Track / File Search................................................ 26
T ime Search......................................................... 27
Number Select Search .......................................... 27
Switching Subtitles ............................................... 28
Switching Audio Soundtrack ................................... 29
Switching Camera Angles ...................................... 30
Noise Reduction ................................................... 30
CLEAR+ ............................................................... 31
LIST OF SETTINGS ........................................ 32
2
Register Online at www.magnavox.com/support/ today to get the most benefits from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits such as software
upgrades and important product notifications. Register Online at www.magnavox.com/support/
1. INTRODUCTION
1.1. Safety Instructions
To
•
•
•
Avoid the Hazards of Electrical Shock and Fire
Do not handle the AC power cord with wet hands.
Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance in the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before moving the unit.
• In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a book
cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth, curtain,
newspaper, etc. Make sure to leave a space of 5.9 inches (15cm) or more around this apparatus.
• When installing this unit in a temperate environment, avoid a place with rapid temperature changes.
• This unit should not be used in a tropical environment as it has not been evaluated under such conditions.
• No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com/support/
Click on
Disposal of Used Batteries
• In certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of
batteries according to local regulations.
EN
3
1.2. Included Accessories
• Remote Control (NC093UL)
• Quick Start Guide
MAGNAVOX is a registered trademark of Philips North America Corporation and is used by Funai Electric Co., Ltd. and
Funai Corporation, Inc. under license from Philips North America.
© 2017 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded
or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of such changes.
EN
4
2. FEATURES
2.1. Features
Blu-ray Disc™
You can enjoy Blu-ray Disc™ which is capable of storing
five times more data than a conventional DVD.
Pop Menu
Some BD-videos have a Pop Menu which is a navigation
menu that can be called up and be operated on the TV
screen without interrupting playback. You can call up the
Pop Menu by pressing [DISC MENU]. Contents in the Pop
Menu vary depending on the disc.
BD-Java
With some Blu-ray discs which contain Java applications,
you can enjoy interactive functions such as games or
interactive menus.
HDMI 1080p/24 output (Blu-ray Disc™ only)
This unit is equipped with the feature which can provide
smooth movement during playback of film originated
material with the frame rate of 24 frames per second
with progressive. (Available only when the display device
is connected with an HDMI cable.) Refer to ˝HDMI Video
Resolution˝ on page 36.
DVD upscaling for enhanced picture quality
Your current DVD will look even better than before thanks
to video upscaling. Upscaling will increase the resolution
of standard definition DVD to high definition up to 1080p
over an HDMI connection. The picture will be less jagged
and more realistic for a near high definition experience.
Playing back contents from a USB Memory Stick
You can play back JPEG files stored on a USB Memory
Stick. BD-ROM discs sometimes store picture-in-picture
commentary, subtitles or other extras on a USB Memory
Stick for use during playback with the BD-video.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and USB
Memory Stick ensures that you can continue to enjoy your
current audio-video collection. Additionally, you can enjoy
AVCHD (for DVD-RW/-R only) / JPEG files.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on
a disc / SD Memory Card using USB card reader / USB
hub (not included). Your high definition personal archive is
playable in HD quality.
Listen to rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Easy and simple connection to your HDTV via HDMI
Connect this unit to your HDTV with one single HDMI (HighDefinition Multimedia Interface) cable. It is recommended
to use a High Speed HDMI cable for better compatibility.
The high definition video output signal will be transferred
to your HDTV without conversion to analog signals, so you
will get excellent picture and sound quality, completely free
from noise. Thanks to other multiple outputs, you can also
easily connect to your home theater system or amplifier.
x.v.Color
This unit supports playback of video contents on discs
recorded with ˝x.v.Color˝ technology. To watch this video
content with the ˝x.v.Color˝ space, a TV or other display
device supporting both video image reproduction using
˝x.v.Color˝ standard and capability of manual switching of
its color space setting is required. Please refer to the user
manual of your display device for further information.
fun-Link (HDMI CEC)
This unit supports HDMI CEC, which allows integrated
system control over an HDMI cable and is part of the
HDMI standard. This function may not work properly on
some devices.
PiP (BONUSVIEW™)
Some BD-videos have the PiP function which enables you
to display the Secondary Video in the Primary Video. You
can call up the Secondary Video by pressing [MODE]
whenever the scene contains a Secondary Video.
EN
5
2.2. Product Info
˝Product Info˝ screen provides information about this unit’s software version.
You can also download the latest software from the Magnavox website and update it yourself if it is newer than the
version currently on your unit. The current version of software on your unit can be seen on the ˝Product Info˝ screen.
To access ˝Product Info˝, follow the procedure below.
1. Press [HOME].
2. Use [
] to select ˝Settings˝, then press [OK].
3. Use [
] to select ˝Others˝, then press [OK].
4. Use [
] to select ˝Product Info˝, then press [OK].
2.3. Symbols Used in this Owner’s Manual
To specify which media type each function is applicable to, the following symbols that are at the beginning of each
Symbol type.
Symbol
[BD Video]
[DVD Video]
[CD]
Description
Description refers to BD-video
Description refers to DVD-video
Description refers to audio CD / DTS-CD
[AVCHD]
Description refers to DVD-RW/-R with AVCHD files
[JPEG]
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB Memory Stick with JPEG files
If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media.
EN
6
3. FUNCTIONAL OVERVIEW
3.1. Front Panel
1
2
3* 4* 5 6
7
* The unit can also be turned on by pressing this button.
1. Disc tray
5.
(POWER) button
2. Infrared sensor window
6. Power-On indicator
(OPEN/CLOSE) button*
3.
• Flashes while unit is starting up.
• Dims and flickers when IR remote signal is received.
(PLAY/PAUSE) button*
4.
• Press to start playback or resume playback.
7. USB Input
• During playback, press to pause playback.
C Caution
• Do not connect any device other than USB Memory Stick or USB card reader into the USB Input. (e.g. PC, external
HDD, digital camera, keyboard, mouse, etc.)
• When connecting a USB Memory Stick, connect it directly to the USB Input. Do not use a USB extension cable.
D Note
• Due to new ENERGY STAR® requirements, this unit will automatically turn on the screen saver after 5 minutes of
inactivity and enter standby mode after 25 minutes of inactivity.
3.2. Rear Panel
1
1. AC power cord
2
2. HDMI OUT jack
C Caution
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the unit.
• This unit does not have a TV RF modulator.
EN
7
3.3. Remote Control
1
7.
(SKIP) button
• During playback, press once to return to the
beginning of the current Title, Chapter, Track or File.
• During playback, press twice to return to the
previous Title, Chapter, Track or File.
• During the JPEG playback, press to return to the
previous File.
8.
(STOP) button
• Press to Stop playback.
12*
13
2
14
15
9. DISPLAY button
• Press to Display the on-screen display menu.
3
4
16
5
6*
7
8
9
10
11
17
10. REPEAT button
• Press to select Repeat mode.
11. RED / GREEN / BLUE / YELLOW buttons
• Press to activate shortcut keys on some BD-video
functions. When a file list is shown, press to switch
between pages.
12.
18
19
20
21
(OPEN/CLOSE) button*
• Press to Open or Close the disc tray.
13. HOME button
• Press to display the Home Menu.
14. MODE button
• During playback, press to display the Play Menu.
15. OK button
• Press to confirm or select menu items.
16. RETURN button
• Press to Return to the previously displayed menu or
screen function.
17.
(FORWARD) button
• During playback, press to Fast Forward the playback.
• When playback is in pause, press to Slow Forward
the playback.
18.
(SKIP) button
• During playback, press to Skip to the next Chapter,
Track or File.
• When playback is in pause mode, press to Forward
the playback picture by picture.
19.
(PAUSE) button
• Press to Pause playback.
* The unit can also be turned on by pressing these
buttons.
1.
(POWER) button
• Press to Turn On the unit, or to switch the unit into
Standby mode. (To completely Turn Off the unit, you
must unplug the AC power cord.)
2. DISC MENU button
• During Playback (Blu-ray Disc™ or DVD), press to
select the Menu (Top Menu or Pop Menu/Menu).
3.
buttons
• Press to select items or settings.
20. AUDIO button
• Press to select the Audio Channel (such as audio
languages) on a disc.
4. SEARCH button
• Press to display the Number Select Menu or the
Search Menu.
5.
(REVERSE) button
• During playback, press to Fast Reverse the playback.
6.
(PLAY) button*
• Press to start playback or resume playback.
21. SUBTITLE button
• Press to select Subtitles on a disc.
continued on next page
EN
8
D Note
• The Power-On indicator on the front panel dims and
flickers when it receives the IR signal from the remote
control.
• Use the included remote control. Remote-control
operation on any other remote control, such as a
universal remote control, is not guaranteed.
■ Using the Remote Control
Remote Control Usage Guidelines:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote controls of different devices can interfere with
each other. Avoid using a remote control from another
device which is located close to the unit.
• Replace the batteries when you notice a fall-off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
■ Installing the Batteries in the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity
indicated inside battery compartment of the remote
control.(not included)
1
2
3
- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
- Above:
approx. 16 feet (5 m) within 15°
C Caution
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Lithium or ni-cad and ni-mh rechargeable batteries are
not recommended to use for remote control.
• Do not mix different types of batteries such as alkaline
and standard (carbon-zinc).
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries may
have different voltages.
• Make sure that the + and - ends of each battery match
the indications in the battery compartment.
• Remove batteries from battery compartment, when the
remote is not going to be used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public rules
that apply in your country or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
EN
- Below:
approx. 10 feet (3 m) within 30°
30˚
30˚
16 feet (5 m) 23 feet (7 m)
9
16 feet (5 m)
3.4. Guide to On-Screen Display
■ Home Menu
When you Turn On the unit, Home Menu will appear automatically. Otherwise, press [HOME].
1
3
2
Disc
1. ˝Disc˝:
2. ˝USB Memory Stick˝:
3. ˝Settings˝:
Initiates playback of inserted disc, displays a list of Tracks / Files or the Media Filter
Menu
Displays a list of Tracks / Files on the connected USB Memory Stick or the Media Filter
Menu
To access the Setup Menu
■ Setup Menu
1
Video Out
TV Aspect
> 16:9 Wide
Progressive Mode
> Auto
2
Audio Out
HDMI
Playback
Others
1. Category
2. Menus / Options:
Displays options for the highlighted item on the left whenever available
■ Play Menu
During playback, press [MODE] to display the Play Menu.
e.g.) Blu-ray Disc™
Search
Audio
Subtitle
Repeat
Noise Reduction
CLEAR+
EN
10
4. CONNECTIONS
4.1. Connection to a TV
■ HDMI Connection (Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.)
Your TV
HDMI cable
(not Included)
HDMI IN
No analog audio connection required.
(*1) 1080i:
Outputs video data with a frame rate of 30 frames per second.
(*2) 1080p:
Outputs video data with a frame rate of 60 frames per second.
(*3) 1080p/24: Outputs video data with a frame rate of 24 frames per second.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the
connector are matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also
known as HDMI category 2 cable) is recommended for better compatibility.
D Note
• If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it may be
the TV. Please refer to the TV’s user’s manual.
• If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV
input is not an HDMI-DVI Input terminal.
EN
11
4.2. Connection to an Audio System
• When you change the connections, all devices should be Turned Off.
• When connecting the unit to an external audio system, refer to the User Manual for Setup / Configuration help.
■ HDMI Audio Connection
AV receiver / amplifier with
an HDMI input jack
HDMI IN
EN
HDMI cable
(not Included)
12
4.3. HDMI Audio Output
˝Audio Output˝
setting A
˝BD Audio Mode˝
setting A
Media

Audio Source

Dolby Digital
˝Bitstream˝
˝Primary Audio Only˝
˝LPCM˝
"All" or
"Primary/Secondary
Audio"
˝Primary Audio Only˝
"All" or
"Primary/
Secondary Audio"
Which audio format can be output depends on the compatibility of the connected device.
Dolby Digital or Downmix 2ch PCM
Downmix 2ch PCM
Dolby Digital Plus
Dolby Digital Plus
or
Dolby Digital
or
Downmix 2ch PCM*1
Dolby Digital
or
Downmix 2ch PCM*1
Downmix 2ch PCM*1
Downmix 2ch PCM*1
Dolby TrueHD
Dolby TrueHD
or
Dolby Digital
or
Downmix 2ch PCM*2
Dolby Digital
or
Downmix 2ch PCM*2
Downmix 2ch PCM*2
Downmix 2ch PCM*2
BD-Video
DTS®
DTS® or Downmix 2ch PCM
®
DTS-HD
DTS-HD®
or
DTS®
or
Downmix 2ch PCM*3
Downmix 2ch PCM
DTS®
or
Downmix 2ch PCM*3
LPCM
Downmix 2ch PCM*3
Multi LPCM
Dolby Digital
Dolby Digital or Downmix 2ch PCM
Downmix 2ch PCM
DTS®
DTS® or Downmix 2ch PCM
Downmix 2ch PCM
MPEG
Multi LPCM
Multi LPCM
DVD-Video
LPCM
Multi LPCM
Audio CD
LPCM
2ch LPCM
DTS-CD
DTS®
DTS® or Downmix 2ch PCM
Downmix 2ch PCM
Dolby Digital
Dolby Digital or Downmix 2ch PCM
Downmix 2ch PCM
AVCHD
LPCM
Multi LPCM
*1) Only Dolby Digital parts in Dolby Digital Plus Stream are decoded, then it will Downmix 2ch PCM.
*2) Only 2ch presentation parts in Dolby TruHD Stream are decoded.
*3) Only the core substream is decoded.
D Note
• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel
down-mixed LPCM depending on the capability of the connected device even if you select ˝Bitstream˝ in ˝Audio
Output˝ setting.
• When playing back a BD-Video which only contains the primary audio, the audio output will be the same case as
˝Primary Audio Only˝ even if the ˝BD Audio Mode˝ is set to ˝All˝ or ˝Primary/Secondary Audio˝.
• If “BD Audio Mode” is set to “All” or “Primary/Secondary Audio”, HD Audio will not be output. In order to enable the
Button Sound feature, set “BD Audio Mode” to “All”. (The Button Sound setting may be found in the Pop Menu.
• In order to configure “Audio Output” in the “HDMI” settings, “Voice Guide” must be set to “Off”.
EN
13
5. BEFORE YOU START
5.1. Finding a Viewing Video Source Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1. Press [
(POWER)] to Turn On the unit.
2. Turn On your TV.
3. Please locate the Source / Input / AUX / Video button on TV’s remote control. The button may vary on the TV brand
and model. Once you have located the button, press until you see ˝Please Wait...˝ on the Screen.
Please Wait...
This is the correct viewing of the video Source Input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
5.2. Initial Setup
Please follow the instructions below to complete the initial setup.
1. Language setup screen will appear. Use [
] to select your language, then press [OK].
Language
Please select your language for on-screen
display.
If you want to use the Voice Guide function,
please set to “English” or “Español”
English
Español
Français
2. Voice Guide Setup screen will appear. Use [
] to select “On” or “Off”, then press [OK].
Voice Guide
Switch Voice Guide On or Off. Sets On the
Voice Guide, “Audio Output” setting will set to
“LPCM” automatically. If Voice Guide is On, it
will not be able to set the “Audio Output”.
On
Off
Return
This screen will not appear when “Français” is selected under the “Language” setting.
continued on next page
EN
14
■ How to Reset the OSD Language
You can reset the OSD language if you selected the wrong language.
1. Press [HOME] to display the Home Menu.
2. Use [
] to select ˝
˝, then press [OK].
• This item is ˝Settings˝ (English) / ˝Configuraciones˝ (Spanish) / ˝Paramètres˝ (French).
• From here on, please select one of the following items you can find on screen:
3. Use [
] to select ˝Playback˝ (English) / ˝Reproducción˝ (Spanish) / ˝Lecture˝ (French), then press [OK].
4. Use [
] to select ˝Language˝ (English) / ˝Idioma˝ (Spanish) / ˝Langue˝ (French), then press [OK].
5. Use [
] to select your desired language, then press [OK].
6. If the items that were set are displayed in your desired language, then press [HOME] to exit.
EN
15
6. INFORMATION ON PLAYBACK
6.1. Information on Playback
■ Playable Discs and Files
Playable discs
Logos
Blu-ray Disc™
- BD-video
- BD-RE* (ver. 2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1 / 1.2 / 1.3)
(Recorded in BDMV format)
(Unfinalized disc may not be played back.)
DVD-video
DVD-RW
(finalized video mode discs only)
DVD-R
(finalized video mode discs only)
CD-DA (audio CD)
CD-RW
CD-R
DTS-CD
-
(*) Due to the intentional progression of the Blu-ray Disc™ format by its standard setting authority, the company cannot
guarantee or warrant the playability of future extensions of the Blu-ray Disc™ format with this product.
Playable files
AVCHD
JPEG
Readable device
USB Memory Stick
Media
DVD-RW/-R
SD Memory Card using USB card reader / USB hub (not included)
BD-RE/-R
DVD-RW/-R
CD-RW/-R
USB Memory Stick
Playable files / data
JPEG, picture-in-picture commentary, Subtitles or other extras for some BD-ROM.
D Note
• This unit may not be able to play back discs recorded on PC’s or other recorders.
continued on next page
EN
16
■ Recommended Specifications
AVCHD
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to an SD
Memory Card. The DVD or SD Memory Card containing AVCHD files must have a proper file and folder structure meeting
AVCHD format specifications. Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or SD
Memory Card. (Please refer to user manuals of your device / software for more information.)
JPEG
Resolution
• Upper limit:
• Lower limit:
• Maximum file size of a picture:
4,096 x 4,096 dots (sub sampling is 4:4:4)
5,120 x 5,120 dots (sub sampling is up to 4:2:2 or 4:2:0)
32 x 32 dots
12MB
■ Folder / File Number Limitations
Blu-ray Disc™, DVD and USB Memory Stick
• 999 folders (groups) and 9,999 files
CD
• 255 folders (groups) and 999 Tracks / Files
Caution / Note for USB Memory Stick
C Caution
• Do not try to open or modify the USB Memory Stick.
• Do not touch the terminal surface with your fingers or any metals.
D Note
• This unit supports USB Memory Stick with FAT16 / FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read USB Memory Sticks formatted on a computer. If that is the case, please reformat the USB
Memory Sticks on this unit and try again. Please not that all files stored on the USB Memory Stick will be erased
upon format.
• Please keep the USB Memory Sticks in their cases when you are not using them.
• Some USB Memory Sticks may not work with this unit.
• This unit can read SD Memory Cards using a USB card reader (not included).
- Readable cards: SD Memory Card (8 MB - 2 GB)
miniSD Memory Card (16 MB - 2 GB)
microSD Memory Card (256 MB - 2 GB)
SDHC Memory Card (4 GB - 32 GB)
miniSDHC Memory Card (4 GB - 8 GB)
microSDHC Memory Card (4 GB - 16 GB)
- Readable files:
AVCHD / JPEG
• Depending on a USB card reader or USB hub, connected card or device may not be recognized.
continued on next page
EN
17
■ Unplayable Media and Files
The following discs will not be played back on this unit.
• CD-ROM
• CD-I (compact disc-interactive)
• DVD-RAM
• VSD (video single disc)
• DVD-audio
• video CD
• HD DVD
• SVCD
• SDXC Memory Card
• microSDXC Memory Card
• unfinalized disc
• BD-RE (ver. 1.0)
• BD-RE (ver. 2.1) (Recorded in BDAV format)
• BD-R (ver. 1.1 / 1.2 / 1.3) (Recorded in BDAV format)
• BDXL™
• Blu-ray Disc™ / DVD / CD / USB Memory Stick / SD Memory Card containing DivX® files
• Blu-ray Disc™ / USB Memory Stick that contains AVCHD files
• Blu-ray Disc™ / DVD hybrid disc (played back as a BD-video only)
• DVD-RW/-R recorded in non compatible recording format
• Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super Audio CD layer
cannot be heard.
• Playability of dual discs is not guaranteed.
• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights Management (DRM).
■ Region Codes
This unit has been designed to play back BD-video with region ˝A˝ and DVD-video with region
˝1˝ or ˝ALL˝. You cannot play back BD-video or DVD-video that is labeled for other regions.
Look for the symbols on your BD-video or DVD-video. If these region symbols do not appear on
your BD-video or DVD-video, you cannot play back the disc on this unit. The letter or number
inside the globe refers to region of the world. BD-video or DVD-video discs labeled for a specific
region can only be played back on players with the same region code.
BD-video
DVD-video
■ Hint for Disc Playback
The contents of a disc are generally divided into sections or folders (group of titles / files) as shown below.
BD-video, DVD-video, AVCHD
Title 1
Chapter 1 Chapter 2
Track 1
Track 2
Chapter 1
Title 2
Chapter 2
Chapter 3
Audio CD
Track 3
Track 4
Track 5
folder (group) 2
File 4
File 5
JPEG
folder (group) 1
File 1
File 2
File 3
continued on next page
EN
18
■ Description for Icons
[
] : group (folder) icon
[
] : music file icon
[
] : photo file icon
- ˝Folders˝ refers to the group of files.
- ˝Track˝ refers to the contents recorded on the audio CD.
- ˝Files˝ refers to the contents on a disc which are recorded in AVCHD or JPEG file format.
D Note
• Unrecognizable characters will be replaced with asterisks.
6.2. Guide to File List
■ Picture File List
2
1
Thumbnail
TR
--- / 999
06051_1140
Folder_001
Page Up
CD
DATA
Folder_002
3
4
Page Down
Media Mode
1. Current File number / Total number of Files
3. Media type
2. Playback status symbol
4. Group (folder) / File list (thumbnails)
■ How to Navigate through the File List
• For picture file list, use [
] to move the highlight up, down, left and right. Press
[RETURN] to go back to the previous hierarchy.
• To access the files in a Group (folder), select the desired Group (folder), then press [OK].
• Press [RED] or [GREEN] to change the page list up or down.
• Press [YELLOW] to go back to the file type (˝Photo˝ / ˝AVCHD˝) selection screen.
• Press [HOME] to Exit.
6.3. How to Insert a Disc
1. Press [
(OPEN/CLOSE)] to Open the disc tray.
2. Place the Disc on the disc tray with its label side facing up.
3. Press [
(OPEN/CLOSE)] to Close the disc tray.
• It may take a while to load the disc.
Align the Disc to the disc tray guide.
EN
19
7. BASIC PLAYBACK
7.1. Playing Back a Disc
[BD Video]
[DVD Video]
[CD]
[AVCHD]
[JPEG]
1. Insert a disc (refer to ˝How to Insert a Disc˝ on page 19).
• For Blu-ray Disc™ / DVD / audio CD or a disc containing only one type of file, playback will start automatically. If
not, press [ (PLAY)] (or [
(PLAY/PAUSE)] on the unit).
• Some discs may show a Title or a Disc Menu. In this case, refer to ˝Using the Title / Disc / Pop Menu˝ on page
22.
2. Select the type of the file you want to play back, then press [OK].
a
b
a. For ˝Photo˝, thumbnail screen will appear.
• Refer to ˝Picture File List˝ on page 19 and ˝How to Navigate through the File List˝ on page 19.
b. For ˝AVCHD˝, playback will start automatically.
To Skip to the next Title / Chapter / Track / File:
Press [
To Skip to the previous Title / Chapter / Track / File: Press [
(SKIP)].
(SKIP)].
To Pause playback:
Press [
(PAUSE)] (or [
To Return to Normal playback:
Press [
(PLAY)] (or [
(PLAY/PAUSE)] on the unit).
(PLAY/PAUSE)] on the unit).
To Stop playback:
Press [ (STOP)].
Playback will be in Resume-On-Stop mode. To clear the resume information, press [
(STOP)] again.
■ Resume-On-Stop Mode
Blu-ray Disc™ / DVD / AVCHD
When you press [ (PLAY)] (or [
point where it has been stopped.
(PLAY/PAUSE)] on the unit) next time, the playback will start from the
Audio CD
(PLAY/PAUSE)] on
Playback will start from the point where it is stopped next time you press [ (PLAY)] (or [
(PLAY/PAUSE)] on the unit), playback will start from the
the unit). If you press [OK] instead of [ (PLAY)](or [
beginning of the Track / File instead of resuming from the stop point.
JPEG
Playback will start from the beginning of the current file next time you press [
unit) or [OK].
(PLAY)] (or [
(PLAY/PAUSE)] on the
D Note
• Playback will also Stop and the Home Menu will appear when you press [HOME].
• For BD-Java application, the Resume-On-Stop may not be available.
• If you press [OK] instead of [ (PLAY)] (or [
(PLAY/PAUSE)] on the unit), playback can be started from the
beginning of the disc even if it was in the Resume-On-Stop mode.
• Resume-On-Stop mode remains in effect even after Power is Turned Off, but will be cancelled once the disc is
ejected.
• With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.
• With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.
continued on next page
EN
20
D Note for JPEG Playback
• Every press of [
] will turn the image by 90 degrees when an image is displayed.
• During playback, press [DISC MENU] to display thumbnail screen.
• Some unplayable folders or files may be listed due to the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive format) cannot be played back on this unit.
7.2. Playing Back Contents from a USB Memory Stick
[JPEG]
You can play back JPEG files stored on a USB Memory Stick. With the USB Memory Stick, you can also enjoy the
following functions.
• Special additional contents for BD-ROM.
(For more information about the special additional contents, refer to the instruction book that came with the disc.)
1. Connect a USB Memory Stick.
2. Press [HOME].
3. Use [
] to select ˝USB Memory Stick˝, then press [OK].
4. Follow step 2 in ˝Playing Back a Disc˝ on page 20.
C Caution
• Do not disconnect the USB Memory Stick or switch the unit to Standby mode while a content on the USB Memory
Stick is being accessed. It may result in malfunction or loss of the stick's data.
• If you connect a USB Memory Stick or SD Memory Card via a USB card reader or USB hub, BD-ROM data will be
written onto the first connected card or device. Connecting a USB Memory Stick directly to this unit is recommended.
• Occasionally, SD Memory Cards / Micro SD Memory Cards will not be recognized when using certain Adapters. In
such cases, try a different USB Adapter.
D Note
• When connecting more than two USB Memory Sticks to a USB Hub, this unit may fail to recognize them. In such
cases, disconnect the USB Hub from the unit then reconnect it, or use less USB Memory Sticks at a time.
• The resume information will be cleared when;
- [ (STOP)] is pressed while in the Resume-On-Stop mode.
- the USB Memory Stick is disconnected.
- the unit is switched to Standby mode.
• Do not delete the folders or files on the USB Memory Stick with your computer. This unit may not read USB Memory
Sticks formatted on a computer.
• If a folder or file name includes one of the following unrecognizable characters, the folder or file name may not be
displayed correctly.
- Unrecognizable characters: . , " = + [ ] ; / \ : | ¥
• This unit can read JPEG files and AVCHD on an SD Memory Card by using USB card reader / USB hub (not included).
EN
21
7.3. Using the T itle / Disc / Pop Menu
[BD Video]
[DVD Video]
[AVCHD]
Some BD-videos, DVD-videos or AVCHD files may contain a Title Menu which describes the contents of the disc, or a
Disc Menu which guides you through the available functions on the disc.
• With such discs, a Title Menu or a Disc Menu may appear automatically when you insert the disc. Otherwise, press
[DISC MENU] to call up the Menu Select Menu. Use [
] to select ˝Top Menu˝ or ˝Pop Menu/Menu˝, then press
[OK]. Refer to the disc’s manual on how to navigate through the menu.
e.g.) Blu-ray Disc™
Pop Menu
Top Menu
D Note
• Menus vary among discs. Refer to the information accompanying the disc for details.
• [DISC MENU] may not work with some discs.
EN
22
8. SPECIAL PLAYBACK
8.1. Fast Forward / Fast Reverse
[BD Video]
[DVD Video]
[CD]
[AVCHD]
1. During playback, press [
(FORWARD)] repeatedly for Fast Forward.
During playback, press [
(REVERSE)] repeatedly for Fast Reverse.
2. Press [
(PLAY)] (or [
(PLAY/PAUSE)] on the unit) to return to Normal playback.
D Note
• For Blu-ray Disc™, DVD and AVCHD, speed changes at 5 different levels.
• For audio CD, speed changes at 3 different levels.
• For audio CD, Fast Forward / Fast Reverse search between different files are not available.
8.2. Slow Forward Playback
[BD Video]
[DVD Video]
[AVCHD]
1. During playback, press [
Every time you press [
2. Press [
(PLAY)] (or [
(PAUSE)] (or [
(PLAY/PAUSE)] on the unit). Then press [
(FORWARD)].
(FORWARD)], the playback speed changes at 3 different levels.
(PLAY/PAUSE)] on the unit) to return to Normal playback.
D Note
• Slow Reverse is not available.
8.3. Step by Step Playback
[BD Video]
[DVD Video]
[AVCHD]
1. In pause mode, press [
Every time you press [
2. Press [
(PLAY)] (or [
(SKIP)] repeatedly.
(SKIP)], playback will advance one step at a time.
(PLAY/PAUSE)] on the unit) or [
D Note
• Step by step reverse is not available.
EN
23
(PAUSE)] to return to Normal playback.
8.4. Repeat Playback
Available repeat functions vary depending on the disc.
1. During playback, press [REPEAT].
2. Use [
] to select the desired repeat mode.
• You can also change the repeat mode by pressing [REPEAT] repeatedly.
REPEAT MODE
Chapter Repeat
The current Chapter will be played back repeatedly.
Title Repeat
The current Title will be played back repeatedly.
Track Repeat
The current Track or File will be played back repeatedly.
All Repeat
All Tracks in the media will be played back repeatedly.
Group Repeat
The current Group (folder) will be played back repeatedly.
Random Repeat
Repeats the random playback.
Random Repeat
Repeats the random playback in a folder.
AVAILABLE MEDIA
[BD Video]
[DVD Video]
[AVCHD]
[BD Video]
[DVD Video]
[AVCHD]
[CD]
[JPEG]
[CD]
[JPEG]
[CD]
[JPEG]
3. Press [RETURN] to Exit.
D Note
• The repeat setting will be cancelled when you stop playback.
• When the repeat setting is set for an JPEG folder (file), the repeat setting will be cancelled if you select another JPEG
folder (file) to play back.
• You can also use the Repeat function from the Play Menu. Play Menu can be called up by pressing [MODE].
8.5. Slide Show
[JPEG]
1. Follow steps 1 and 2 in ˝Playing Back a Disc˝ on page 20.
2. Open the folder which contains the desired JPEG files.
3. Use [
] to select a desired file to be played back, then press [
(PLAY)] (or [
(PLAY/PAUSE)] on
the unit) or [OK].
• An image will be played back from the selected file and go to the next one in turn every 10 seconds.
4. Press [
(STOP)] to Stop playback.
• When you press [DISC MENU] in the stop mode, the highlight goes back to the first item.
• When you press [DISC MENU] in the Resume-On-Stop mode, the highlight goes back to the file played last.
D Note
• Large-size JPEG files take a few moments to be displayed.
EN
24
8.6. PiP (BONUSVIEW™) Setting
[BD Video]
Some BD-videos have the PiP function which enables you to display the Secondary Video in the Primary Video.
PiP
1/8
Primary Video
Secondary Video
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select ˝PiP˝ then press [OK].
• PiP information will appear.
3. Use [
] to select the Secondary Video you want to show.
• The Secondary Video will be displayed with the Secondary Audio.
• Use [
] to switch between current setting and ˝Off˝.
4. Press [RETURN] to Exit.
• How to select the Secondary Audio output, refer to ˝Switching Audio Soundtrack˝on page 29.
D Note
• Not that the secondary video will be displayed at any time during playback. Depending on the scene, the secondary
video may not be available.
EN
25
8. 7 . T itle / Chapter Search
[DVD Video]
[BD Video]
■ Using [
[AVCHD]
(SKIP)] / [
1. During playback, press [
(SKIP)]
(SKIP)] to Skip the current Title or Chapter and move to the next.
The Title or Chapter will move forward one at a time.
• If there is no Chapter in one Title, the current Title may be Skipped.
To go back to the beginning of the current Title or Chapter, press [
(SKIP)].
Press [
(SKIP)] repeatedly to go to the previous Title or Chapter. The Title or Chapter may move backward one at
a time.
■ Using [SEARCH]
1. During playback, press [SEARCH] to display the Search Menu.
] to select ˝
2. Press [SEARCH] or use [
TT
˝ or ˝ CHP ˝, then press [OK].
e.g.) Blu-ray Disc™
Search
1 / 999
TT
3. Use [
] to select the Title / Chapter number, then press [OK].
Playback will start from the beginning of the Title / Chapter.
D Note
• As for the BD-video, how it performs will be strongly determined by the disc, and may not perform as described.
• For DVD, the Title Search can be performed on the Home menu by pressing [SEARCH] while in the Stop mode or the
Resume-On-Stop mode.
• You can also perform the Title / Chapter Search from the Play Menu. Play Menu can be called up by pressing
[MODE].
8.8. Track / File Search
[CD]
■ Using [
[JPEG]
(SKIP)] / [
1. During playback, press [
(SKIP)]
(SKIP)] to Skip the current Track or File and move to the next.
The Track / File will move forward one at a time. To go back to the beginning of the current Track / File,
press [
(SKIP)].
Press it repeatedly to go to the previous Track / File. The Track / File will move backward one at a time.
■ Using [SEARCH]
1. During playback, press [SEARCH].
• For JPEG files, skip to step 3.
2. Press [SEARCH] or use [
3. Use [
] to select ˝
TR
˝, then press [OK].
] to select the Track number, then press [OK].
Playback will start from the beginning of the Track.
D Note
• You can also perform the Track / File Search from the Play Menu. Play Menu can be called up by pressing [MODE].
EN
26
8. 9 . T ime Search
[DVD Video]
[BD Video]
[CD]
[AVCHD]
1. During playback, press [SEARCH] to display the Search Menu.
2. Press [SEARCH] or use [
] to select ˝
˝, then press [OK].
e.g.) Blu-ray Disc™
Search
00:12:44 / 11:13:14
3. Enter the time count you want to jump to.
• Use [
] to enter the first digit of the time counter, then press [
• When the last digit is entered, press [OK].
Playback will start from the desired time entered.
].
D Note
• You can also perform the Time Search from the Play Menu. Play Menu can be called up by pressing [MODE].
8.10. Number Select Search
[DVD Video]
[BD Video]
[AVCHD]
Some BD-videos and DVD-videos or AVCHD files have button menus to jump to each button displayed scene. During
playback the scenes which have the button menu, you can enter the button number by using the Number Select Menu.
1. During playback, press [SEARCH] repeatedly to select the Number Select Menu.
e.g.) Blu-ray Disc™
Number
0000
• For BD-Java, the Number Select Menu of single-digit is displayed.
• For DVD, the Number Select Menu of double-digit is displayed.
• For BD-videos and AVCHD files, the Number Select Menu is displayed even if there is no button menu in the
scene.
2. Use [
] to enter the number you want to jump to.
• To move the digit that you wish to change, press [
].
3. After all digit numbers are entered, press [OK].
Playback of the selected scene will start.
D Note
• As for the BD-video, how it performs will be strongly determined by the disc, and may not perform as described.
EN
27
8.11. Switching Subtitles
Some video materials may have subtitles in one or more languages. For commercially available discs, the supported
languages can be found on the disc case. Follow the steps below to switch the Subtitle language during playback.
[BD Video]
1. During playback, press [SUBTITLE].
] to select ˝Primary˝, ˝Secondary˝ or ˝Style˝, then press [OK].
2. Use [
• You can also change the setting by pressing [SUBTITLE] repeatedly when the highlight is on ˝Primary˝.
˝Primary˝: Sets the Subtitle for the Primary Video.
˝Secondary˝: Sets the Subtitle for the Secondary Video.
˝Style˝:
Sets Style of the Subtitle.
3. Use [
] to select your desired Subtitle or Style.
Subtitle
• Use [
Primary
1 ENG / 3
Secondary
Off
Style
Off
] to switch between current Subtitle setting and ˝Off˝.
4. Press [RETURN] repeatedly to Exit.
[DVD Video]
[AVCHD]
1. During playback, press [SUBTITLE].
2. Use [
] to select your desired Subtitle.
• You can also change the setting by pressing [SUBTITLE] repeatedly.
Subtitle
• Use [
1 ENG / 32
] to switch between current Subtitle setting and ˝Off˝.
3. Press [RETURN] to Exit.
D Note
• Some discs will only allow you to change the subtitles from the Disc Menu or Pop Menu. Press [DISC MENU] to
select the ˝Top Menu˝ or ˝Pop Menu˝ (or ˝Menu˝).
• If the disc has no Subtitle language or Subtitle Style, ˝Not Available˝ will be displayed on the TV screen.
• During playback of the Secondary Video, the Primary Subtitle setting is not available except when there is no Subtitle
for the Secondary Video.
• You can also change the Subtitle setting from the Play Menu. Play Menu can be called up by pressing [MODE].
EN
28
8.12. Switching Audio Soundtrack
When playing back video material recorded with two or more soundtracks (these are often in different audio languages
or audio formats), you can switch them during playback. For Blu-ray Disc™, available audio varies depending on ˝BD
Audio Mode˝ setting. Refer to page 32.
[BD Video]
1. During playback, press [AUDIO].
] to select ˝Primary˝ or ˝Secondary˝, then press [OK].
2. Use [
• You can also change the setting by pressing [AUDIO] repeatedly when the highlight is on ˝Primary˝.
˝Primary˝: Sets the audio for the Primary Video.
˝Secondary˝: Sets the audio for the Secondary Video.
3. Use [
] to select your desired audio stream channel.
Audio
Primary
1 ENG Dolby D
Multi-ch
/3
Secondary
1 ENG DTS
Multi-ch
/3
[Decoding Format] : Dolby D
• For ˝Secondary˝, use [
] to switch between current audio setting and ˝Off˝.
4. Press [RETURN] repeatedly to Exit.
[DVD Video]
[CD]
[AVCHD]
1. During playback, press [AUDIO].
2. Use [
] to select your desired audio stream channel.
• You can also change the setting by pressing [AUDIO] repeatedly.
Audio
1 ENG Dolby D
Multi-ch
/3
[Decoding Format] : Dolby D
• For audio CD, you can select following options.
˝Stereo˝: Both right and left channels are active (stereo).
˝L-ch˝:
Only left channel is active.
˝R-ch˝:
Only right channel is active.
3. Press [RETURN] to Exit.
D Note
• The Secondary Audio will not be output when the Secondary Video is not displayed or when ˝BD Audio Mode˝ is set
to ˝Primary Audio Only˝. (For some Blu-ray discs, Secondary Audio will be output even when Secondary Video is Off.)
• The sound mode cannot be changed during playback of discs not recorded in multiple audio mode.
• Some discs allow changing the audio language setting from Disc Menu. (Operation varies depending on the discs.
Refer to the manual accompanying the disc.)
• [AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing audio
setting on the disc menu).
• If the disc has no audio language, ˝Not Available˝ will be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams or channels is not available.
• You can also change the Audio setting from the Play Menu. Play Menu can be called up by pressing [MODE].
EN
29
8.13. Switching Camera Angles
[DVD Video]
[BD Video]
Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can
appears on the TV screen.
change the Camera Angle when
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select ˝Angle˝, then press [OK].
3. Use [
] to select your desired angle.
• The selected Angle will be displayed on the display bar at the top of the TV screen.
4. Press [RETURN] to Exit.
D Note
• If ˝Angle Icon˝ setting is set to ˝Off˝,
will not appear on the TV screen.
8.14. Noise Reduction
[DVD Video]
[BD Video]
[AVCHD]
Reduces the noise of the playback picture.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select ˝Noise Reduction˝, then press [OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
Noise Reduction
Off
˝On˝: Activates noise reduction.
˝Off˝: Deactivates noise reduction.
4. Press [RETURN] to Exit.
D Note
• The setting will remain the same even if the unit is switched to Standby mode.
EN
30
8.15. CLEAR+
[DVD Video]
[BD Video]
[AVCHD]
CLEAR+ enhances the contrast of the picture and makes edges crisp. It is effective especially for DVD’s.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select ˝CLEAR+˝, then press [OK].
3. Use [
] to select your desired setting.
e.g.) Blu-ray Disc™
CLEAR+
Off
˝On˝: Gives low-definition videos high-definition like picture quality.
˝Off˝: Shows the original picture as recorded.
4. Press [RETURN] to Exit.
D Note
• This operation is prohibited during Fast Forward, Fast Reverse, Slow Forward playback and pause mode.
• Pictures may appear whiter depending on the material and the connected TV. In this case, turn ˝CLEAR+˝ Off.
• ˝CLEAR+˝ is not effective under the following conditions.
- When the material is in 1080p/24 which is commonly used in Blu-ray discs.
EN
31
9. LIST OF SETTINGS
In ˝Settings˝, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the Setup Menu.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select ˝Settings˝, then press [OK].
3. Use [
] to select the desired Category, then press [OK].
4. Use [
] to move up and down the list to select Menus / Options.
5. To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [RETURN].
6. Press [HOME] to Exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category
Video Out
Menus / Options
TV Aspect
Progressive Mode
Audio Out
Voice Guide
DRC
BD Audio Mode
HDMI
fun-Link (HDMI CEC)
Video Resolution
Audio Output
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
16:9 Squeeze
Auto
Video
On
Off
Auto
On
Off
All
Primary/Secondary Audio
Primary Audio Only
On
Off
Auto
480p
Bitstream
LPCM
continued on next page
EN
32
Category
Playback
Menus / Options
Language
Audio
Subtitle
Disc Menu
BD Rating Level
DVD Rating Level
Password Change
Angle Icon
Auto
English
Español
Français
Original
Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish
Off
Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish
Bulgarian
Chinese
Czech
Danish
Dutch
English
Finnish
French
German
Greek
Hungarian
Icelandic
Irish
Off
Age Setting
Off
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other
Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other
Italian
Japanese
Korean
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Spanish
Swedish
Turkish
Other
4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]
On
Off
continued on next page
EN
33
Category
Others
Menus / Options
Software Update
Product Info
Initialize
Disc
USB Memory Stick
Reset Settings
Format USB Memory Stick
(Unit) Erase Saved BD-ROM Data
(USB Memory Stick) Erase Saved BD-ROM Data
Reset All Settings
OSS
EN
34
10.
SETUPS
10.1. fun-Link (HDMI CEC)
HOME
A
˝Settings˝
A
˝HDMI˝
A
˝HDMI CEC˝
fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may
not work properly depending on the device connected to the unit. When ˝fun-Link (HDMI CEC)˝ setting is set to ˝On˝ the
functions listed below will be available.
■ One Touch Play
When the buttons below are pressed then operations are performed on this unit, the TV will automatically be Turned On
and switched to the appropriate video Source Input.
Buttons for one touch play:
(PLAY/PAUSE)] (on the unit)
• [
• [ (PLAY)], [
(SKIP)], [
(SKIP)], [HOME] (on the remote control)
• [DISC MENU] (on the remote control when the a disc is inserted in the unit)
■ One Touch Standby
When you press and hold [ (POWER)] for 2 seconds, it turns Off the TV first and then Turns Off the power on this unit.
When the connected fun-Link (HDMI CEC) compatible display device is Turned Off first, then it Turns Off the power to this
unit.
■ System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the Player Menu
Language (OSD menu language) for this unit. ˝Language˝ under ˝Playback˝ on page 33 for available languages.
• Feature is available only when ˝Auto˝ is selected in the Setup Menu ˝Language˝ section in ˝Settings˝ while
connected via an HDMI cable.
EN
35
10.2. HDMI Video Resolution
HOME
A
˝Settings˝
A
˝HDMI˝
A
˝Video Resolution˝
Set the resolution of the video signal being output from the HDMI OUT jack.
You can select the desired ˝Video Resolution˝ among the settings listed below: ˝Auto˝,˝480p˝.
Actual Output Resolution:
Setting in the
˝Video Resolution˝
Auto
480p
Source
480i/60
480p/60
720p/60
1080i/60 1080p/60
720p/24
1080p/24
The highest resolution supported by your display device will automatically be in effect.
480p/60
• For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available.
D Note
• The selected resolution must also be supported by your display device.
• If your TV and the unit are connected by a DVI cable and if ˝Auto˝ is selected, ˝480p˝ will be automatically in effect.
• Refer also to your TV’s manual.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit length)
may be limited by the connected device.
• Among the display devices that support HDMI, some do not support audio output (for example, projectors). While
connected to a device such as a projector, audio will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an
HDMI-DVI converter cable, the signals are output in digital RGB.
• HDMI video resolution does not work during the playback of a BD-video.
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that
both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data
encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating
instructions of your display device (or an AV receiver / amplifier) for more information.
EN
36
10.3. Parental
Some BD-videos or DVD-videos feature parental lock levels. Playback will stop if the ratings exceed the levels you set,
it will require you to enter a password before the disc will play back. This feature prevents your children from viewing
inappropriate material.
1. Enter your 4-digit password.
] to enter the first digit of your password, then press [
• Use [
• When 4-digit numbers are entered, press [OK].
].
For the first time use:
Enter any 4-digit number (except for 4737). That number will be used as the password. Record your password, in
case you forget it.
• If you forget the password, enter ˝4737˝. The password will be cleared and rating level will be set to ˝Off˝.
■ BD Rating Level
HOME
A
˝Settings˝
A
˝Playback˝
A
˝BD Rating Level˝
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Playback˝, then press [OK].
3. Use [
] to select ˝BD Rating Level˝, then press [OK].
4. Enter your 4-digit password.
• Use [
] to enter the first digit of your password, then press [
• When 4-digit numbers are entered, press [OK].
5. Use [
].
] to select your desired option, then press [OK].
˝Off˝:
To release the limitation.
˝Age Setting˝: To set the age limitation.
After selecting ˝Age Setting˝, enter the age.
• Use [
] to enter the first digit of the age, then press [
• When 3-digit numbers are entered, press [OK].
].
e.g.)
For age 6, enter ˝006˝.
For age 15, enter ˝015˝.
6. Press [HOME] to Exit.
continued on next page
EN
37
■ DVD Rating Level
HOME
A
˝Settings˝
A
˝Playback˝
A
˝DVD Rating Level˝
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Playback˝, then press [OK].
3. Use [
] to select ˝DVD Rating Level˝, then press [OK].
4. Enter your 4-digit password.
• Use [
] to enter the first digit of your password, then press [
• When 4-digit numbers are entered, press [OK].
5. Use [
].
] to select your desired level, then press [OK].
6. Press [HOME] to Exit.
Off
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
1 [Kid Safe]
RATING EXPLANATIONS
Parental is inactive; all discs can be played back.
DVD software of any grades (adult / general / children) can be played back.
No one under 17.
Restricted; under 17.
Parental Guidance Recommended.
Unsuitable for children under 13.
Parental Guidance suggested.
General Audience.
Suitable for children.
■ Password Change
HOME
A
˝Settings˝
A
˝Playback˝
A
˝Password Change˝
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Playback˝, then press [OK].
3. Use [
] to select ˝Password Change˝, then press [OK].
4. Enter your 4-digit password.
• Use [
] to enter the first digit of your password, then press [
• When 4-digit numbers are entered, press [OK].
].
5. Enter a new 4-digit password in the same way as the step 4.
6. Reenter the same new 4-digit password in the same way as the step 4.
7. Press [HOME] to Exit.
To temporarily disable parental lock:
Some discs allow you to temporarily disable parental lock. When you try to play them back, the password entry screen
will be displayed.
Follow the instruction which appears on the TV screen to disable parental lock.
EN
38
10.4. Software Update
HOME
A
˝Settings˝
A
˝Others˝
A
˝Software Update˝
This unit lets you update the software yourself using a software update disc, USB Memory Stick.
The available discs are below:
• BD-RE/-R
• DVD-RW/-R
• CD-RW/-R
■ Disc / USB Memory Stick Update
You can update the software by using a disc or USB Memory Stick.
Prepare a blank disc or USB Memory Stick for software update:
Access www.magnavox.com/support/, and download the latest version software to a blank disc or USB Memory Stick
using a PC by following the directions described on the website.
• Use a blank disc or USB Memory Stick, download one software per disc or USB Memory Stick. Write the software in
the root directory of the disc or USB Memory Stick.
• For more details on how to download the software, please refer to the website.
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Others˝, then press [OK].
3. Use [
] to select ˝Software Update˝, then press [OK].
4. Use [
] to select ˝Disc˝ or ˝USB Memory Stick˝, then press [OK].
5. Use [
] to select ˝Yes˝, then press [OK].
6. Insert the disc or connect the USB Memory Stick for software update.
7. After loading disc or USB Memory Stick, confirmation message will appear. Select ˝Yes˝ and press [OK].
8.
The unit will restart automatically, then software update will start.
• It may take a while to complete the updating.
9.
After the update finishes, this unit will restart. Remove the disc or the USB Memory Stick from the unit.
C Caution
• Please do not unplug the AC power cord, eject the disc or disconnect the USB Memory Stick or press
[ (POWER)] to turn the unit to Standby mode while performing a ˝Disc / USB Memory Stick Update˝.
D Note
• Software update will not change any of the current settings.
EN
39
10.5. Voice Guide
HOME
A
˝Settings˝
A
˝Audio Out˝
A
˝Voice Guide˝
1. Use [
] to select “Settings” in the Home Menu, then press [OK].
2. Use [
] to select “Audio Out”, then press [OK].
3. Use [
] to select the “Voice Guide”, then press [OK].
4. Use [
] to select “On” or “Off”, then press [OK].
5. Press [HOME] to Exit.
D Note
• In order to enable the Voice Guide function, the OSD language needs to be set to English or Spanish.
Voice Guide is not available in French.
• When Voice Guide is set to On, the HDMI Audio Output setting (Settings A HDMI A Audio Output) is fixed to LPCM.
Changing the HDMI Audio Output setting is only possible when Voice Guide is set to Off.
10.6. Restore Default Settings
HOME
A
˝Settings˝
A
˝Others˝
A
˝Initialize˝
Menus to reset player settings, format a USB Memory Stick.
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Others˝, then press [OK].
3. Use [
] to select ˝Initialize˝, then press [OK].
4. Use [
] to select the desired setting, then press [OK].
˝Reset Settings˝:
All the settings except for the ˝Parental˝ settings will be reset to default.
˝Format USB Memory Stick˝ (Only available when a USB Memory Stick is connected):
Initialize the USB Memory Stick.
˝(Unit) Erase Saved BD-ROM Data˝:
Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, on this player.
˝(USB Memory Stick) Erase Saved BD-ROM Data˝
(Only available when a USB Memory Stick is connected):
Clears the supplemental data for the BD-ROM playback, such as Subtitle data, from the USB Memory Stick.
˝Reset All Settings˝
Resets this unit to factory default settings.
5. Use [
] to select ˝Yes˝, then press [OK].
6. Confirmation message will appear. Press [OK] to complete the setting.
7. Press [HOME] to Exit.
C Caution
• Do not remove the USB Memory Stick while executing ˝Format USB Memory Stick˝ or ˝(USB Memory Stick) Erase
Saved BD-ROM Data˝. It will damage the USB Memory Stick.
D Note
• ˝Format USB Memory Stick˝ and ˝(USB Memory Stick) Erase Saved BD-ROM Data˝ are not available when a Blu-ray
Disc™ is in the unit.
EN
40
11.
TROUBLESHOOTING
Problem
No power.
No sound or picture.
No reaction to the remote control.
No Audio / Video signal on the
display device via HDMI cable.
No high-definition video signal on the
TV screen.
Distorted picture.
Completely distorted picture or black
/ white picture with Blu-ray Disc™ /
DVD.
No sound or distorted sound.
Picture freezes momentarily during
disc playback.
Cannot play back a disc.
No return to start-up screen when
disc is removed.
T ip
Check the AC power cord, if it is properly connected.
Try another power outlet.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug it back in and
attempt to power On the unit.
Make sure both the TV and Blu-ray Disc™ player are Turned On.
Confirm the connections to the TV are made properly as shown in the
˝CONNECTIONS˝ on page 11.
Check to see whether the connected TV or another device supports HDCP. (This
unit will not output a video signal unless the other device supports HDCP.)
Reduce the distance to infrared sensor window.
Confirm that the player’s AC power cord is plugged into a power outlet.
Check the batteries in the remote control and make sure they are inserted
properly by + or - symbols.
Aim the remote at the unit’s remote receiver. Then press any arrow key and
confirm the Power-On indicator dims and blinks when a remote button is pushed.
Please check IR signal. Refer to ˝IR Signal Check˝ on page 46.
If the unit is connected to a non-certified HDMI device, the Audio / Video signal
will not output to that device.
Make sure the display device is on the correct Input / Video source.
Perform the HDMI hotplug: Disconnecting the HDMI cable from the display
device, Turn On both devices, and replug the HDMI cable back in.
Check with the TV manufacturer, if there are any software updates available for
the TV.
Check to see if the HDMI cable is a certified version.
Does the disc contain high-definition video? High-definition video is only
available when the disc contains it.
Does the TV support high-definition video? High-definition video is only
available when the TV supports it.
Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Make sure the disc is compatible with this unit.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI connection.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter or
Projector which does not handle Digital sound.
Check the settings in ˝Audio Out˝ menu.
Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from the center to the outer edge.
Make sure that the disc is playable on this unit.
Check the region code of the disc. This unit supports the following region
codes.
- Blu-ray Disc™: ˝A˝
- DVD: ˝ALL˝ or ˝1˝
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
Is the disc a newer title? This problem may be solved by software update.
Refer to ˝Software Update˝ on page 39.
Soft reset this unit by turning it Off for 30 seconds, then On again.
To completely reset the unit, press and hold [ (POWER)] on the front panel for
10 seconds to shut down the unit or unplug the AC power cord from the AC outlet
for 5-10 seconds.
continued on next page
EN
41
Problem
T ip
The operation is not possible.
in the upper right hand corner of
the TV screen.
Buttons do not work or the unit stops To soft reset the unit, press and hold [ (POWER)] on the front panel for 10
seconds to shut down the unit or to hard reset the unit by unplugging the AC
responding.
power cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
The operations may be prohibited by the disc. Refer to the instructions for the
operating commands during playback. disc.
The unit cannot read Blu-ray Disc™ / Condensation? (Let sit 1 or 2 hours)
DVD/ CD.
Check to see if the disc is compatible with this unit. (Refer to page 16.)
Wipe dirt off the disc from the center to the outside or replace the disc. Refer
to ˝Cleaning Discs˝ on page 46.
Scene shooting Angle does not
Angles cannot be switched for Blu-ray Disc™ / DVD which do not contain
switch.
multiple Angles. In some cases multiple Angles are only recorded for specific
scenes.
Playback does not start when a Title Check the settings in ˝Parental˝ menu.
is selected.
The password for rating level has
Enter the default password ˝4737˝, then your forgotten password will be
been forgotten.
cleared. Then to change password go to ˝Password Change˝ on page 38.
Error message appears when I select Make sure that the unit is connected to a MAGNAVOX brand fun-Link
˝Auto˝ in the ˝Language˝.
(HDMI CEC) TV and the ˝fun-Link (HDMI CEC)˝ is set to “On”.
This error message may appear when your TV's OSD language is not supported
by this unit.
Cannot play back AVCHD file.
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t)
written to a DVD. The DVD containing AVCHD files must have a proper file and
folder structure meeting AVCHD format specifications. Please use AVCHD
compliant device / software to burn or copy AVCHD files to DVD. (Please refer
to user manuals of the device / software for more information.)
The capacity of the USB Memory
Data may be written on the USB Memory Stick when a BD-video uses the
Stick decreased.
Virtual Package feature while a USB Memory Stick is connected to the unit.
Cannot play back a MPEG-2 video and MPEG-2 is not compatible with this unit.
audio from the USB Memory Stick.
Cannot read the contents on the USB The USB Memory Stick is not compatible with this unit or the contents may be
Memory Stick.
damaged.
Try and Turn Off the unit, then turn it back On.
To soft reset the unit, press and hold [ (POWER)] on the front panel for 10
seconds to shut down the unit or to hard reset the unit by unplugging the AC
power cord from the AC outlet for 5-10 seconds.
Cannot play back BD-Video.
Connect a USB Memory Stick (256MB or more of available memory) which
is formatted on this unit. Some discs require memory when playing back the
content.
Do not disconnect the USB Memory Stick during playback.
Cannot use BD-Live.
BD-Live function cannot be performed because this unit does not connect the
internet.
Cannot play back 3D.
Some discs may not be played back because this unit does not support 3D.
Cannot load a Blu-ray Disc™ (stuck in Unplug unit from AC outlet for 20 seconds. Plug unit back in and press the
˝Loading…˝ mode) and cannot Open [ (OPEN/CLOSE)] on the unit to eject the disc.
the disc tray to eject the disc.
The software update screen appears Please complete the software update.
after Turning On the unit.
When the software update has failed, the software update screen will keep
appearing after turning the unit on. If the software update continues failing,
please try it by using a USB Memory Stick with the update software installed in
its root directory. In this case, please change the file name as below.
˝E****UH10000FA1.bin˝ A ˝UPDATE10000FA1.BIN˝
Do not change the numbers. The file name is case sensitive.
Cannot read a USB Memory Stick.
The format of the USB Memory Stick is not compatible with this unit. Please
try and format it on this unit (All data will be deleted).
continued on next page
EN
42
Problem
Cannot play back JPEG files from a
disc.
Cannot find a JPEG file.
No Audio signal from Surround
system of the audio system.
T ip
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the selected Group (folder) does not contain more than 9,999
files for Blu-ray Disc™ / DVD / USB Memory Stick and 999 files for CD.
Make sure that the file extension is .jpg / .JPG / .jpeg / or .JPEG.
Make sure the audio system is turned on.
Check the Input mode on the audio system if it is on the correct channel.
Check if the Surround system is compatible with either Bitstream or LPCM. If
not sure please check the user manual or contact the Surround manufacturer.
Once confirmed check the setting in the ˝Settings˝ of this unit.
Increase the volume level of the Surround system.
D Note
• Do not attempt to repair the Blu-ray Disc™ Player yourself. This may cause severe injury, irreparable damage to your
Blu-ray Disc™ Player and void your warranty.
• Please have available your Blu-ray Disc™ Player model and serial number before contacting us. These numbers are
available on the cabinet, as well as on the packaging.
EN
43
12.
LANGUAGE CODE LIST
Language
A-B
Abkhazian
Afar
Afrikaans
Code
Language
French [FRE]
4748 Frisian
4747 Galician
4752 Georgian
Albanian
6563 German [GER]
5051 Maltese
5966 Spanish [SPA]
5165
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian [BUL]
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5158
5758
5360
5367
5447
5451
5455
5467
5955
5964
5961
5960
6047
6051
6061
6567
6569
6568
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [GLE]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Code
5264
5271
5358
5747
5565
5550
5547
5551
5557
5347
5566
5647
5668
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
Language
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Code
5957
5953
5965
5958
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Language
Siswat
Slovak [SLO]
Slovenian
Somali
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6565
6557
6558
6561
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
7155
7161
7267
D Note
• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every time
you change the Subtitle language setting on page 28 or audio language setting on page 29. If you choose any
other languages, ˝---˝ will be displayed instead.
EN
44
13.
SPECIFICATIONS
Signal system
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
General
NTSC Color
120 V AC, 60 Hz
15 W (standby: 0.5 W)
11.1 x 1.7 x 7.9 inches (280.0 x 41.0 x 198.5 mm)
2.2 lbs. (1.0 kg)
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals
USB input
TYPE A
HDMI output
HDMI jack x 1
Digital Video: 480p, 720p, 1080i, 1080p, 1080p/24
Digital Audio
D Note
• The specifications and design of this product are subject to change without notice.
EN
45
14.
MAINTENANCE
■ Servicing
• Please refer to relevant topics on ˝TROUBLESHOOTING˝ on page 41 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts
inside. Eject the disc (if possible), disconnect the USB Memory Stick (if connected to the unit), place the unit into
Standby mode, unplug the AC power plug, and please contact: 1-866-341-3738 or
visit : www.magnavox.com/support/
■ Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such
chemicals may discolor the surface or damage the unit.
■ Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to outside. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
■ Cleaning the Disc Lens
• If this unit still does not perform properly although you refer to the relevant sections and to ˝TROUBLESHOOTING˝ in
this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
■ Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage the unit.
■ IR Signal Check
If the remote control does not work properly, you can test IR signal using a digital camera (including a
cellphone with a built-in camera) to see if the remote control sends out the infrared signal.
1. Turn On the digital camera.
2. Direct a digital camera to the remote control, then press and hold any button on the remote control.
• If infrared light appears on the digital camera display, the remote control is working.
EN
46
15.
TRADEMARK INFORMATION
˝Blu-ray Disc™˝, ˝Blu-ray˝ and ˝Blu-ray Disc™˝ logo are
trademarks of the Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
˝BONUSVIEW™˝ and ˝BONUSVIEW™˝ logo are
trademarks of the Blu-ray Disc Association.
˝AVCHD˝ and the ˝AVCHD˝ logo are trademarks of
Panasonic Corporation and Sony Corporation.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(˝AVC VIDEO˝) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L. L.
C. SEE HTTP://WWW.MPEGLA.COM
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD
(˝VC-1 VIDEO˝) AND/OR (ii) DECODE VC-1 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
Java and all Java based trademarks and logos are
trademarks or registered trademarks of Oracle and/or its
affiliates.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
˝x.v.Color˝ and ˝x.v.Color˝ logo are trademarks of Sony
Corporation.
EN
47
16.
GLOSSARY
AACS
Digital Audio
Advanced Access Content System (AACS) is the content
protection scheme used with Blu-ray discs.
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an analog
signal based on these numbers. See also ˝Sampling
Frequency˝ and ˝Analog Audio˝.
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See
also ˝Digital Audio˝.
Dolby Digital
Aspect Ratio
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multichannel audio.
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as its height).
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
AVCHD
AVCHD is a new format for high definition video
camcorders which can record and play high-resolution HD
images.
Dolby TrueHD
Blu-ray Disc™
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc™ supports
7.1 multi-channel surround sound output.
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.
DTS® (Digital Theater System)
DTS® is a multi channel surround sound system. You
can enjoy movie dynamic and realistic sound like movie
theater. DTS surround sound technologies were developed
by DTS, Inc.
Chapter
Just as a book is split up into several chapters, a Title on
a BD-video or DVD-video is usually divided into chapters.
See also ˝Title˝.
DTS-HD®
DTS-HD® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc™ supports 7.1 multi-channel surround sound
output.
Cinavia™
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at
http://www.cinavia.com
To request additional information about Cinavia by mail,
send a postcard with your mailing address to: Cinavia
Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
This product incorporates proprietary technology under
license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents
issued and pending as well as copyright and trade secret
protection for certain aspects of such technology.
Cinavia is a trademark of Verance Corporation. Copyright
2004-2015 Verance Corporation. All rights reserved
by Verance. Reverse engineering or disassembly is
prohibited.
HDMI (High-Definition Multimedia Interface)
A digital interface between an audio and video Source. It
can transmit component video, audio, and control signal
with one cable connection.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You
can copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R,
or USB Memory Stick from a computer and play back the
files on this unit.
Local Storage
A storage area of sub contents for playing virtual
packages on BD-video.
continued on next page
EN
48
PCM (Pulse Code Modulation)
The most common system of encoding digital audio, found
on CD and DAT. Excellent quality, but requires a lot of data
compared to formats such as Dolby Digital and MPEG
audio. For compatibility with digital audio recorders (CD,
MD and DAT) and AV amplifiers with digital Inputs, this unit
can convert Dolby Digital, DTS, and MPEG audio to PCM.
See also ˝Digital Audio˝.
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
rate, the better the sound quality.
Title
A collection of chapters on BD-video or DVD-video. See
also ˝Chapter˝.
Track
Audio CD uses Tracks to divide up the content of a disc.
The BD-video or DVD-video equivalent is called a Chapter.
See also ˝Chapter˝.
x.v.Color
˝x.v.Color˝ is a promotion name given to the products that
have the capability to realize a wide color space based
on the xvYCC specifications and is a trademark of Sony
Corporation.
EN
49
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts are excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
Note:
Any product sold and identified as refurbished or renewed carries a ninety (90) days labor
and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not apply
to any product not purchased and used in the United States and Canada.
This warranty only covers failures due to defects in material or workmanship which occur during normal
use. It does not cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse,
abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY
TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND
ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF
NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL
BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without
prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact
us at:
FUNAI CORPORATION
Tel: 1-866-341-3738
www.magnavox.com/support/
19900 Van Ness Ave., Torrance CA 90501
EN
50
18.
ESPAÑOL
18.1. Mando a Distancia
6. Botón (REPRODUCIR)*
• Púlselo para iniciar o reanudar la reproducción.
1
(SALTAR)
7. Botón
• Durante la reproducción, púlselo una vez para volver
al comienzo del título, capítulo, pista o archivo
actual.
• Durante la reproducción, pulse dos veces sobre la
tecla para volver al título, capítulo, pista o archivo
anterior.
• Durante la reproducción de archivos JPEG, púlselo
para volver al archivo anterior.
12*
13
2
14
15
3
8. Botón (DETENER)
• Púlselo para detener la reproducción.
4
16
5
6*
7
8
9
10
11
17
9. Botón DISPLAY
• Púlselo para visualizar el menú desplegable en
pantalla.
10. Botón REPEAT
• Presione para seleccionar el modo de repetición.
18
19
20
21
11. Botones de ROJO / VERDE / AZUL / AMARILLO
• Púlselos para activar las teclas de atajo en algunas
funciones de BD-vídeo. Cuando se despliega la lista
de archivos, presione para cambiar las páginas.
12. Botón (ABRIR/CERRAR)*
• Púlselo para cerrar o abrir la bandeja para discos.
13. Botón HOME
• Púlselo para mostrar el menú de inicio.
14. Botón MODE
• Durante la reproducción, púlselo para visualizar el
menú de reproducción.
15. Botón OK
• Púlselo para confirmar o seleccionar elementos de
menú.
* La unidad también se puede encender pulsando estos
botones.
1. Botón (ENERGÍA)
• Pulse el botón para encender la unidad, o para
pasar la unidad al modo de espera. (Para apagar
completamente la unidad, debe desconectar el
cable de alimentación de CA.)
16. Botón RETURN
• Púlselo para volver a la pantalla de funciones o
menú mostrado anteriormente.
17. Botón
(ADELANTAR)
• Durante la reproducción, púlselo para avanzar
rápido la reproducción.
• Cuando la reproducción esté en pausa, púlselo para
avanzar lentamente la reproducción.
2. Botón DISC MENU
• Durante la reproducción (Blu-ray Disc™ o DVD),
púlselo seleccionar el menú (menú superior o menú
emergente/menú).
18. Botón
(SALTAR)
• Durante la reproducción, púlselo para saltar al
siguiente capítulo, pista o archivo.
• Cuando la reproducción esté en modo de pausa,
púlselo para avanzar la reproducción imagen a
imagen.
3. Botones de
• Púlselos para seleccionar elementos o
configuraciones.
4. Botón SEARCH
• Púlselo para mostrar el menú de selección de
número o el menú de buscar.
19. Botón (PAUSAR)
• Púlselo para pausar la reproducción.
5. Botón
(REVERSO)
• Durante la reproducción, púlselo para invertir rápido
la reproducción.
Continua en la página siguiente
ES
51
20. Botón AUDIO
• Púlselo para seleccionar el canal de sonido (como
idiomas de sonido) de un disco.
• Use el control remoto suministrado. No se garantiza la
operación de control remoto en cualquier otro control
remoto, tal como un control remoto universal.
21. Botón SUBTITLE
• Púlselo para seleccionar los subtítulos de un disco.
D Nota
• El indicador Encendido en el panel frontal se atenúa
y parpadea cuando se recibe la señal IR del control
remoto.
18.2. Encontrar el Canal de Video en su Televisor
Revise los siguientes pasos despues de haber completado todas las conexiones a su TV.
1. Presione [
(ENCENDIDO)] para Encender la unidad.
2. Encienda su televisor.
3. Busque el boton Source / Input / AUX / Video en el control remoto del televisor. El boton puede variar en funcion de
la marca y el modelo del televisor. Una vez localizado el boton presione hasta ver ˝Please Wait...˝ en la pantalla.
Please Wait...
Esta es la visualización correcta de la entrada de la fuente de video.
• Si la TV está conectada por medio de un cable HDMI, puede tomar algunos minutos para que aparezca la imagen
de abertura.
Continua en la página siguiente
ES
52
18.3. Instalacion Inicial
Por favor, siga las instrucciones que se exponen a continuacion para completar la configuracion inicial.
1. Aparece la pantalla de configuracion del idioma. Utilice [
] para seleccionar su idioma y pulse luego [OK].
Idioma
Por favor, seleccione su idioma para el menú en
pantalla.
Si desea usar la función de Guía por voz, ajuste
“English” o “Español”
English
Español
Français
2. Voice Guide Setup screen will appear. Use [
] to select “On” or “Off”, then press [OK].
Guía por voz
Enciende o apaga la Guía por voz. Enciende la
Guía de voz, el ajuste “Salida acústica” se
ajustará en “LPCM” automáticamente. Si la
Guía por Voz está encendida, no podrá ajustar
la “Salida acústica”.
Enc.
Apdo.
Retorno
This screen will not appear when “Français” is selected under the “Language” setting.
■ Cómo restablecer el Idioma OSD
Puede restablecer el idioma OSD si seleccionó el ajuste de idioma equivocado.
1. Presione [HOME] para desplegar el Menú de Inicio.
2. Utilice [
] para seleccionar ˝
˝, despés presione [OK].
• Esta partida es ˝Settings˝ (inglés) / ˝Configuraciones˝ (español) / ˝Paramètres˝ (francés).
• A partir de aquí, por favor seleccione una de las siguientes partidas que puede encontrar en la pantalla:
3. Utilice [
] para seleccionar ˝Playback˝ (inglés) / ˝Reproducción˝ (español) / ˝Lecture˝ (francés), y después
presione [OK].
4. Utilice [
] para seleccionar ˝Language˝ (inglés) / ˝Idioma˝ (español) / ˝Langue˝ (francés), y después
presione [OK].
5. Utilice [
] para seleccionar el idioma que desee, después presione [OK].
6. Si las partidas de ajuste se despliegan en el idioma que seleccionó, presione [HOME] para salir.
ES
53
GARANTÍA LIMITADA
FUNAI CORP. reparará este producto, de forma gratuita en Estados Unidos, en caso de defecto de materiales o fabricación, del
modo siguiente:
DURACIÓN:
PIEZAS:
FFUNAI CORP. suministrará piezas de repuesto de las piezas defectuosas de forma gratuita durante un (1)
año desde la fecha de compra minorista original. Ciertas piezas están excluidas de esta garantía.
MANO DE OBRA:
FUNAI CORP. suministrará la mano de obra de forma gratuita durante un periodo de noventa (90) días
desde la fecha de compra minorista original.
Nota:
Cualquier producto vendido e identificado como reacondicionado tiene una garantía limitada de noventa
(90) días en mano de obra y partes.
LÍMITES Y EXCLUSIONES:
ESTA GARANTÍA SE EXTIENDE SOLAMENTE AL COMPRADOR MINORISTA ORIGINAL. UN RECIBO DE COMPRA U OTRA PRUEBA DE
COMPRA MINORISTA ORIGINAL SERÁ EXIGIDA JUNTO CON EL PRODUCTO PARA OBTENER SERVICIO BAJO ESTA GARANTÍA.
Esta garantía no se extenderá a ninguna otra persona o beneficiario.
Esta garantía quedará invalidada y sin efecto en caso de alteración, sustitución, borrado o pérdida de los números de serie del
producto o si se intentó una reparación por parte de un centro de servicio no autorizado.
Esta garantía limitada no aplica a ningún producto no comprado y usado en los Estados Unidos y Canadá. Esta garantía
solamente cubre los fallos debidos a defectos de material o fabricación que se produzcan durante su uso normal. No cubre
daños producidos durante el transporte, ni daños ocasionados por reparaciones, alteraciones o productos no suministrados por
FUNAI CORP., o daños resultantes de accidente, uso indebido, abuso, trato indebido, aplicación indebida, alteración, instalación
defectuosa, mantenimiento inadecuado, uso comercial (por ejemplo, el uso de este producto en hoteles, establecimientos de
alquiler u oficinas)o daños resultantes de incendio, inundación, tormenta eléctrica o catástrofes naturales.
ESTA GARANTÍA NO CUBRE LOS MATERIALES DE EMBALAJE, NINGÚN TIPO DE ACCESORIOS (EXCEPTO EL MANDO A DISTANCIA),
NINGUNA PIEZA DE ADORNO, PIEZAS DE MONTAJE COMPLETAS, MODELOS DE DEMOSTRACIÓN O DE TALLER.
FUNAI CORP. Y SUS REPRESENTANTES O AGENTES NO SERÁN EN NINGÚN CASO CONSIDERADOS RESPONSABLES DE DAÑOS
GENERALES, INDIRECTOS O CONSECUENCIALES, RESULTANTES DE O PROVOCADOS POR EL USO O LA IMPOSIBILIDAD DE USO
DE ESTE PRODUCTO. ESTA GARANTÍA SUSTITUYE A CUALQUIER OTRA GARANTÍA, EXPRESA O IMPLÍCITA, Y CUALQUIER OTRA
RESPONSABILIDAD CIVIL POR PARTE DE FUNAI, CUALQUIER OTRA GARANTÍA QUE INCLUYA LA GARANTÍA DE COMERCIABILIDAD
E IDONEIDAD PARA UN FIN CONCRETO, QUEDAN POR LA PRESENTE EXCLUIDAS POR DE FUNAI Y SUS REPRESENTANTES EN
ESTADOS UNIDOS.
TODAS LAS INSPECCIONES Y REPARACIONES BAJO GARANTÍA DEBEN SER EFECTUADAS POR UN CENTRO DE SERVICIO
AUTORIZADO.
ESTA GARANTÍA ES VÁLIDA EXCLUSIVAMENTE CUANDO EL APARATO SEA ENTREGADO A UN CENTRO DE SERVICIO AUTORIZADO.
EL PRODUCTO DEBE IR ACOMPAÑADO POR UNA COPIA DEL RECIBO DE COMPRA MINORISTA ORIGINAL.
SI NO SE ADJUNTA PRUEBA DE COMPRA, LA GARANTÍA NO SE APLICARÁ Y SE COBRARÁN LOS COSTES DE LA REPARACIÓN.
IMPORTANTE:
ESTA GARANTÍA LIMITADA LE OTORGA DERECHOS LEGALES ESPECÍFICOS. ES POSIBLE QUE SEA USTED
BENEFICIARIO DE OTROS DERECHOS QUE VARÍEN DE UN ESTADO A OTRO. SI, EN CUALQUIER MOMENTO DURANTE EL
PERIODO DE GARANTÍA, NO PUEDE USTED OBTENER SATISFACCIÓN CON RESPECTO A LA REPARACIÓN DE ESTE PRODUCTO, LE
ROGAMOS QUE SE PONGA EN CONTACTO CON FUNAI CORP.
ATENCIÓN:
FUNAI CORP. SE RESERVA EL DERECHO DE MODIFICAR CUALQUIER DISEÑO DE ESTE PRODUCTO SIN PREVIO AVISO.
DECLARACIÓN DE GARANTÍA CON RESPECTO A REPARACIONES NO AUTORIZADAS:
Para obtener servicio de garantía, debe usted aceptar el producto, o hacer entrega del producto con portes pagados, ya sea
en su embalaje original o en un embalaje que proporcione el mismo grado de protección, a cualquier CENTRO DE SERVICIO
AUTORIZADO. FUNAI CORP. no efectuará reembolso por ningún servicio realizado por proveedores de servicio no autorizados sin
autorización previa por escrito.
Para localizar su CENTRO DE SERVICIO AUTORIZADO más próximo o para solicitudes generales de servicio, puede ponerse
en contacto con nosotros en:
FUNAI CORPORATION
Tel: 1-866-341-3738
www.magnavox.com/support/
19900 Van Ness Ave., Torrance CA 90501
ECS01UL
★★★★★
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising