COLOR CAMERA SUPERHIGH RESOLUTION
66-CMG158CCSE-1
SUPERHIGH RESOLUTION
COLOR CAMERA
IRIS LEVEL
Instruction
OFF
OFF
IRIS LEVEL
POWER
AGC
AES
AUDIO
OFF
OFF
AGC
AES
POWER
AUDIO
FEATURES
SENSITIVITY
This is a highly sensitive camera with minimum scene illumination, ensuring good
quality images in low light environments.
ELECTRONIC SHUTTER
When using manual or fixed iris lenses, the electronic shutter function controls the
amount of light captured by the CCD by altering the shutter speed between
1/50(1/60)~100,000 of a second.
BACK LIGHT COMPENSATION
Subjects lit from behind can be automatically enhanced through DSP control of the
iris and shutter speeds, compensating for poorly illuminated scenes.
APERTURE CORRECTION
Refining captured image outlines for a sharper video image.
ATW (Auto Tracking White balance)
Automatically tracks the changes in the color temperature, and adjusts the white
balance. The color temperature ranging from 2000K to 18000K.
ACCEPTS DC DRIVE AUTO IRIS LENS
DC Auto Iris lens can be used.
AUDIO OUTPUT
Built-in highly sensitive capacitive microphone allows setting up of audio
monitoring system.
FOCAL LENGTH ADJUSTMENT RING
Use this ring to adjusts the back-focal distance or picture focus.
VIDEO
AC24V / DC12V
13
1
2
3
4
5
6
8
9
10
11
12
13
14
AC100 ~ 240V
14
CMG156C
7
PART DESCRIPTION
VIDEO
CMG158C
LENS MOUNT CAP
Prevent damages to the image sensor and to keep dust away.
FOCAL LENGTH ADJUSTMENT RING AND LOCKING SCREW
Use this ring to adjusts the back-focal distance or picture focus. Rotate this ring
clockwise or counterclockwise for a CS-mount lens.
Use the locking screw to lock the focal length.
CAMERA MOUNTING BRACKET
The mounting bracket mounted underneath the main body can be mounted to
either the top or bottom of the camera using the attached screws(M2.6x5.0).
MICROPHONE
Built-in highly sensitive capacitive microphone.
AUTO IRIS CONNECTOR(4PIN SOCKET)
Supplies power and control signals to an auto iris lens (jack not supplied).
POWER LED
Power ON/OFF indicator.
AUDIO OUTPUT RCA CONNECTOR
Audio signal output.
VIDEO OUTPUT CONNECTOR
Composite video signal output.
IRIS LEVEL ADJUSTMENT VARIABLE RESISTOR
Adjusts the signal level when Direct drive(DC) type auto iris lens in use.
AGC (AUTOMATIC GAIN CONTROL) SWITCH
The AGC function automatically adjusts picture gain in accordance with the
brightness of t he subject.
AGC: Gain is increased or decreased from Min. To Max. Automatically.
OFF: Deactivation.
AES (AUTOMATIC ELECTRONIC SHUTTER) SWITCH
When using a manual iris or fixed iris lens, set this switch to AES. Switching
the switch to the OFF while the auto iris lens in use.
DC12V INPUT JACK
DC12V (DC12V ±
10%) power input.
AC24V/DC12V COMPATIBLE INPUT TERMINAL
AC24V(AC24V ±
10%) or DC12V(DC12V ±
10%, Non-Polarity input) power
input.
AC INPUT
AC(AC100~240V) power input.
INSTALLATION
SUITABLE LENSES
The lens must be either a C or CS mount type. The protrusion behind the
mounting surface must be within the following limits:
CMG152C
C - mount lens
CS - mount lens
9mm or less
4mm or less
CHANGING THE PLUG ON AN AUTO IRIS LENS CABLE
The camera is supplied with a plug to fit the AUTO IRIS connector. To connect
an auto iris lens, first replace the plug on the lens cable with the supplied plug.
Solder the lens cable to the pins of the supplied plug (For cable pin assignment,
refer to the instruction manual for the lens.).
CONNECTION OF POWER SUPPLY CABLE (DC12V)
DC12V
POWER SUPPLY
Cover
DC12V
Connect to the power supply, please refer to the above drawing.
NOTE
Lens cable
Rib (If the cable is thick, cut this off.)
When using DC power, check for proper polarity before connecting to power supply.
Plug (Unit accessory)
Pin 4
Direct drive (DC)
Drive -
Pin 2
Direct drive (DC)
Control +
Pin 1
Direct drive (DC)
Control -
Pin 3
Direct drive (DC)
Drive +
FITTING THE LENS
1 Remove the lens mount cap.
2 Screw in the C mount ring(not supplied), until it is secured. When using a CS
mount lens skip step2.
3 Screw in the lens, until it is secured.
4 Insert the lens plug in the AUTO IRIS connector, when fitting a manual-iris lens,
skip step4.
5 Adjust the focal length by turning the focal length adjustment ring.
(Using hexagon screw driver, loose and tighten the screw.)
CONNECTION OF POWER SUPPLY CABLE (AC24V or DC12V)
Connect to the power supply.
Please refer to the right drawing.
NOTE
Make sure to use AC24V or DC12V
(Non-Polarity input) power supply.
AC24V / DC12V
AC24V ( ±10%)
or
DC12V ( ±10%)
DC IRIS LEVEL ADJUSTMENT
Adjust DC iris level manually.
Please refer to the right drawing.
IRIS LEVEL
NOTE
OFF
OFF
Adjust this VR with care so as not
to cause damage to the unit.
AGC
AES
Specifications
Model No.
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
CAUTION
Keep the lens mount cap on the camera when not attaching a lens.
FITTING THE CAMERA
1. The mounting bracket can be attached to either the top or bottom of the camera.
2. Tighten the screw to attach the mounting bracket. Please refer to the following
drawing.
SUPERHIGH RESOLUTION COLOR CAMERA
CMG152CN/P
CMG156CN/P
DC12V ±10%
DC12V ±
10%
AC24V ±10%
NTSC or PAL
Internal
1/3" Super HAD CCD Sensor
768(H) x 494(V) [NTSC]
752(H) x 582(V) [PAL]
CMG158CN/P
AC100 ~ 240V
Chip Size
Horizontal & Vertical
Sync. Frequency
5.59mm(H) x 4.68mm(V)
15.734KHz / 59.94Hz [NTSC]
15.625KHz / 50Hz [PAL]
Scanning System
Resolution
Min. Illumination
S/N Ratio
Auto Gain Control
White Balance
Aperture Correction
2:1 Interlace
540 TV Lines
0.03Lux / F1.2
More than 50dB (AGC-OFF)
On / Off
ATW
Horizontal , Vertical
3.0W (DC12V)
1.7W
4.8W
2.5W (AC24V)
1/60(1/50)S ~ 1/100,000S (Auto or Off)
Auto
CVBS1.0Vp-p, 75Ohm
Yes
C or CS Mount
Direct Drive (DC)
-10 ℃ ~ +50℃ (14 ℉ ~ 122℉ )
γ=0.45
56mm(W) x 54mm(H) x 112mm(D)
370g
400g
Power Consumption
Shutter
Back Light Compensation
Video Output
Audio Output
Lens Mount
Auto Iris Drive
Operating Temperature
Gamma Characteristic
Dimension
Weight
Design and specification are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising