New Products 2017

New Products 2017
New Products 2017
DIMENSIONAL METROLOGY NEW PRODUCTS
To ensure that you are always up-to-date,
Mahr continuously invests in new developments.
This is what EXACTLY means to us!
Accurate length measurement for economical
measurements and calibrations of test specimens.
This is what EXACTLY means to us!
The Precimar PLM 1000-E from Mahr offers a new standard in highly accurate length measurement: For the measurement of test specimens
up to 1,000 mm, the measuring station offers more speed and measuring comfort. A new control, a new object table with increased accuracy
in Z, motorized Y axis and a motorized tilting axis (TB) accelerate measurements and calibrations in measuring rooms and laboratories. Further
information: Page 22
Mahr | New Products 2017
​
INDEX
MarCal Calipers
MarCal Caliper 16 EWR / 16 ER2
Digital Caliper
MarCal 30 EWRi / 16 EWR3
Tiefenmessschieber
Micromar Micrometers
Micromar 40 EWRi / 40 EWR / 40 ER4
Digital Micrometer
MarCator Indicators
MarCator 1087 R / 1087 Ri8
Digital Indicator
Millimar Electrical and Pneumatic Length Measuring Instruments
Millimar C 1700 PC10
Gaging Computer
Millimar Cockpit Software12
Measuring Software
Millimar N1702 / N1701 PS / N1701 USB / N1704 I/O14
Module for inductiv probes
Multimar Universal Measuring Instruments
Multimar 844 S19
Setting Device
Precimar Precision Length Measurement
Precimar 826 PC20
Gage block measuring instrument
Precimar Optimar 100 21
Dial indicator test device
Precimar PLM 1000-E 22
Precision lengh measuring machine
MarSurf Surface Measuring Instruments
MarSurf PS 10 C223
Mobile Roughness Measuring Instrument
MarGear Gear Measuring Instruments
MarGear GMX 400 / GMX 400 ZLW25
Universal gear measuring center
MarGear MarWin27
Software solutions
MarShaft Shaft Measuring Instruments
MarShaft Scope 250 plus
28
MarShaft Scope 600 plus 3D
29
Mahr | New Products 2017
1
MarCal 16 EWR / 16 ER. Digital Caliper
Functions 16 EWR:
• ON/OFF
• AUTO-ON / OFF
• RESET (set display to zero)
• PRESET (for entering a numerical
value)
• Reversal of counting direction
• mm/inch
• LOCK function (key lock)
IP67
DIN
862
Ø1,5
Functions 16 ER:
• ON/OFF
• AUTO-ON / OFF
• RESET (set display to zero)
• mm/inch
• LOCK function (key lock)
• High contrast analog display
• Locking screw above
• Lapped guide way
• Measuring blade for inside measurements
• Slide and beam made of hardened stainless steel
• Step measuring function
• Immediate measurements due to
the Reference system
• Raised guide ways for the protection of the scale
• Excellent resistance against dust,
coolants and lubricants
• Dirt wipers are integrated in the
slide
Features 16 EWR:
• Digit height: 11 mm
• Energy supply: Battery, life span
ca. 3 years
• IP protection category: IP 67
• Scope of delivery: Battery,
Instruction manual, Case
Features 16 ER:
• Digit height: 11 mm
• Energy supply: Battery, life span
ca. 3 years
• Scope of delivery: Battery,
Instruction manual, Case
DIN
862
Ø1,5
​
Technical Data
Order no.
Product type
​
Measuring
range
mm
mm/inch
mm
​
​
4103304
16 EWR
0 – 200
0,01 / .0005“
0,03
DIN 862
rectangular
​
4103305
16 EWR
0 – 200
0,01 / .0005“
0,03
DIN 862
rectangular
•
4103306
16 EWR
0 – 300
0,01 / .0005“
0,04
Factory standard
​
​
4103307
16 EWR
0 – 300
0,01 / .0005“
0,04
Factory standard
​
•
4103205
16 ER
0 – 200
0,01 / .0005“
0,03
DIN 862
rectangular
​
4103206
16 ER
0 – 200
0,01 / .0005“
0,03
DIN 862
rectangular
•
4103207
16 ER
0 – 300
0,01 / .0005“
0,04
Factory standard
​
​
4103208
16 ER
0 – 300
0,01 / .0005“
0,04
Factory standard
​
•
​
Order no.
​
Resolution
a
b
c
d
e
mm
mm
mm
mm
mm
4103304
10
50
19
285
16
4103305
10
50
19
285
16
4103306
14
64
19
388
16
4103307
14
64
19
388
16
4103205
10
50
19
285
16
4103206
10
50
19
285
16
4103207
14
64
19
388
16
4103208
14
64
19
388
16
Error limit
Standard
Depth Rod
Friction
wheel
​
Accessories
Order no. For measuring instrument
Product name
Product type
​
​
​
4102020
16 ER, 16 ER, 16 ER, 16 ER, 16
Depth bridge (75 x 7 mm)
EWR, 16 EWR, 16 EWR, 16 EWR
16 ER, 16 ER, 16 ER, 16 ER, 16
Battery 3 V, CR 2032
EWR, 16 EWR, 16 EWR, 16 EWR
4102520
2
Mahr | New Products 2017
16
16 Em
75 x 7
​
16 Em
MarCal 30 EWRi / 30 EWR. Digital Depth Gage
Digimatic
RS232C
​
Technical Data
Product type
Measuring range
Resolution
Error limit
​
mm
mm/inch
mm
​
4126754
30 EWRi
0 – 200
0,01 / .0005“
0,03
Factory standard
4126699
30 EWR
0 – 200
0,01 / .0005“
0,03
Factory standard
Order no.
​
a
b
mm
mm
4126754
284
100
4126699
284
100
a
5
Features 30 EWRi:
Product name
Product type
​
4102220
30 EWRi
Receiver incl. Software MarCom Std.
i-Stick
4102357
30 EWR
4102410
30 EWR
16 EXu Data Connection Cable USB (2 m) 16 EXu
incl. Software MarCom Std.
Data Connection Cable RS232C (2 m)
16 EXr
4102520
30 EWR, 30 EWRi
Battery 3 V, CR 2032
​
4102915
30 EWR
Digimatic data cable (2 m)
16 EWd
4125611
30 EWR, 30 EWRi
Anvil (4 mm)
30 ESa
4126510
30 EWR, 30 EWRi
Cross Beam Extension (300 mm)
30 EXm
4126511
30 EWR, 30 EWRi
Cross Beam Extension (200 mm)
30 EXm
4
12
R2
30 EXm
30 ESa
ø4
• Digit height: 8,5mm
• Data interface: USB, Opto
RS232C, Digimatic
• IP protection category: IP 67
• Scope of delivery: Battery,
Instruction manual, Case
Order no. For measuring
instrument
​
​
30 EX
Features 30 EWR:
Accessories
ø3
• Digit height: 11 mm
• Data interface: Integrated
wireless
• Energy supply: Battery life
approx. 3 years (approx. 0.5 in
wireless mode)
• IP protection category: IP 67
• Scope of delivery: Battery,
Instruction manual, Case
Standard
16x3,5
Order no.
​
ø1,5
• High contrast analog display
• Locking screw above
• Lapped guide way
• Measuring surfaces made of
steel
• Slide and beam made of hardened stainless steel
• Immediate measurements due to
the Reference system
• Raised guide ways for the protection of the scale
• Excellent resistance against dust,
coolants and lubricants
• Dirt wipers are integrated in the
slide
• Software: MarCom Professional
free download:
www.mahr.com/marcom
(only for Mahr data cables and
wireless systems with USB and
RS232 interface)
integrated
wireless
IP67
b
Functions 30 EWR:
• AUTO-ON / OFF
• DATA (Data transmission via
connection cable)
• ON/OFF
• PRESET (for entering a numerical
value)
• RESET (set display to zero)
• mm/inch
• LOCK function (key lock)
MarConnect
70
Functions 30 EWRi:
• ON/OFF
• AUTO-ON / OFF
• RESET (set display to zero)
• mm/inch
• PRESET (for entering a numerical
value)
• LOCK function (key lock)
• HOLD (storage of measured
values)
• Reversal of counting direction
• DATA (Data transmission)
ø1,5
200/300
i-Stick
30 EXm
Mahr | New Products 2017
30 ESa
3
Micromar 40 EWRi. Digital Micrometer
Functions
• RESET (set display to zero)
• ABS (display can be set to zero
without losing reference to
ORIGIN)
• mm/inch
• ORIGIN (for entering a numerical
value)
• LOCK function (key lock)
• TOL (Tolerance and warning
limits)
• DATA (Data transmission)
• HOLD (storage of measured
values)
integrated
wireless
0
ABS
IP65
TOL
​
Technical Data
​
Measuring
range
mm
4157100
40 EWRi
0 – 25
0,001 / .00005“
2
0,5
4157101
40 EWRi
25 – 50
0,001 / .00005“
2
0,5
5 – 10
4157102
40 EWRi
50 – 75
0,001 / .00005“
3
0,5
5 – 10
4157103
40 EWRi
75 – 100
0,001 / .00005“
3
0,5
5 – 10
Order no.
a
b
c
​
mm
mm
mm
4157100
24
9,5
32
4157101
36
11
57
4157102
45
13
82
4157103
57
13
107
Error limit
mm/inch
µm
Accessories
Order no. Product name
Product type
​
​
4102220
Receiver incl. Software MarCom Std.
i-Stick
4102520
Battery 3 V, CR 2032
​
4158000
Stand, for holding outside micrometers
41 H
i-Stick
4
Mahr | New Products 2017
41 H
3
Measuring
force
N
5 – 10
118
c
b
Spindle thread
pitch
mm
ø21
​
Resolution
ø6,5
Product type
4
Order no.
a
• High contrast analog display
• Spindle is hardened throughout
and ground, stainless
• Spindle and anvil are carbide
tipped
• Rapid drive
• Ratchet is integrated in the
thimble
• Lacquered steel frame, heat
insulated
• Software: MarCom Professional
free download:
www.mahr.com/marcom
(only for Mahr data cables and
wireless systems with USB and
RS232 interface)
• Digit height: 10 mm
• Data interface: Integrated
wireless
• IP protection category: IP 65
• Scope of delivery: Instruction
manual, Battery, Setting standard (from measuring range
25– 50 mm), Case
MarConnect
Micromar 40 EWRi. Digital micrometer set
Functions
• RESET (set display to zero)
• ABS (display can be set to zero
without losing reference to
ORIGIN)
• mm/inch
• ORIGIN (for entering a numerical
value)
• LOCK function (key lock)
• TOL (Tolerance and warning
limits)
• DATA (Data transmission)
• HOLD (storage of measured
values)
integrated
wireless
IP65
0
ABS
TOL
​
Technical Data
Order no.
Product type
​
4157115
Resolution
​
Measuring
range
mm
Measuring force
mm/inch
Spindle thread
pitch
mm
N
Number of
Micrometers
​
40 EWRi
0 – 100
0,001 / .00005“
0,5
5 – 10
4
118
3
ø21
4
b
ø6,5
c
a
• High contrast analog display
• Spindle is hardened throughout
and ground, stainless
• Spindle and anvil are carbide
tipped
• Rapid drive
• Ratchet is integrated in the
thimble
• Lacquered steel frame, heat
insulated
• Software: MarCom Professional
free download:
www.mahr.com/marcom
(only for Mahr data cables and
wireless systems with USB and
RS232 interface)
• Digit height: 10 mm
• Data interface: Integrated
wireless
• IP protection category: IP 65
• Scope of delivery: Instruction
manual, Battery, Setting values,
Case
MarConnect
Accessories
Order no. Product name
Product type
​
​
4102220
Receiver incl. Software MarCom Std.
i-Stick
4102520
Battery 3 V, CR 2032
​
4158000
Stand, for holding outside micrometers
41 H
i-Stick
41 H
Mahr | New Products 2017
5
Micromar 40 EWR. Digital Micrometer
Functions
• RESET (set display to zero)
• ABS (display can be set to zero
without losing reference to
preset)
• mm/inch
• PRESET (for entering a numerical
value)
• LOCK function (key lock)
• HOLD (storage of measured
values)
ABS
​
Technical Data
Order no.
Product type
Resolution
​
Measuring
range
mm
mm/inch
Error
limit
µm
40 EWR
0 – 25
0,001 / .00005“
2
​
4157011
0,5
5 – 10
Standard
​
Factory standard
4157012
40 EWR
25 – 50
0,001 / .00005“
2
0,5
5 – 10
Factory standard
40 EWR
50 – 75
0,001 / .00005“
3
0,5
5 – 10
Factory standard
4157014
40 EWR
75 – 100
0,001 / .00005“
3
0,5
5 – 10
Factory standard
c
mm
mm
4157011
24
9,5
32
4157012
36
11
57
4157013
45
13
82
4157014
57
13
107
Mahr | New Products 2017
118
c
b
3
ø21
b
mm
ø6,5
a
​
4
Order no.
6
Spindle thread Measuring
pitch
force
mm
N
4157013
a
• High contrast analog display
• Spindle is hardened throughout
and ground, stainless
• Spindle and anvil are carbide
tipped
• Rapid drive
• Ratchet is integrated in the
thimble
• Lacquered steel frame, heat
insulated
• Digit height: 10 mm
• IP protection category: IP 65
• Scope of delivery: Instruction
manual, Battery, Setting
standard (from measuring range
25– 50 mm), Case
IP65
Micromar 40 ER. Digital Micrometer
Functions
• RESET (set display to zero)
• mm/inch
• HOLD (storage of measured
values)
• LOCK function (key lock)
​
Technical Data
Product type
Resolution
​
Measuring
range
mm
mm/inch
Error
limit
µm
40 ER
0 – 25
0,001 / .00005“
2
​
4157010
Order no.
b
c
mm
mm
mm
4157010
24
9,5
32
0,5
5 – 10
b
​
Factory standard
ø21
3
Standard
118
c
4
a
​
Spindle thread Measuring
pitch
force
mm
N
ø6,5
Order no.
a
• High contrast analog display
• Spindle is hardened throughout
and ground, stainless
• Spindle and anvil are carbide
tipped
• Rapid drive
• Ratchet is integrated in the
thimble
• Lacquered steel frame, heat
insulated
• Digit height: 10 mm
• IP protection category: IP 40
• Scope of delivery: Instruction
manual, Battery, Case
IP40
Accessories
Order no. Product name
​
Product
type
​
4102520
Battery 3 V, CR 2032
​
4158000
Stand, for holding outside micrometers
41 H
41 H
Mahr | New Products 2017
7
MarCator 1087 R. Digital Indicator
RS232C
Digimatic
MAX
MIN
TOL
ABS
​
Technical Data
Order no.
4337666
Product type
​
1087 R
Measuring span
mm
50
Resolution
mm
0,0005, 0,001, 0,002, 0,005, 0,01
Resolution
inch
.00002“, .00005“, .0001“, .0002“, .0005“
Graduation values
mm
0,001, 0,002, 0,005, 0,01, 0,02, 0,05
Range of analog display
mm
± 0,01, ± 0,02, ± 0,04, ± 0,1, ± 0,2
Error limit
mm
0,007
Error limit over 50 graduations
mm
0,002
Repeatability
mm
0,001
Measuring force
N
1,25 – 2,7
Standard
​
Factory standard
Lifting protection cap
​
•
Order no.
a
b
c
Mounting shaft
mm
mm
mm
mm
267,3
40
52
8
​
35
26
ø12
a
4337666
45
ø60,5
• High contrast LCD
• Operating and display unit (bezel) can be rotated through 280°
• Immediate measurements due to
the Reference system
• Lift-off dust protection cap on
end of measuring pin
• Mounting shank and measuring
spindle are both made of hardened stainless steel
• Software: MarCom Professional
free download:
www.mahr.com/marcom
(only for Mahr data cables and
wireless systems with USB and
RS232 interface)
• Digit height: 8,5 mm
• Data interface: Opto RS232C,
Digimatic, USB
• Energy supply: Battery, life span
ca. 3 years
• IP protection category: IP 42
• Scope of delivery: Instruction
manual, Battery
0
ø58
Functions
• ON/OFF
• RESET (set display to zero)
• mm/inch
• Reversal of counting direction
• PRESET (for entering a numerical
value)
• TOL (enter tolerance limit values)
• MAX/MIN memory for searching
the reversal point
• TIR (MAX-MIN) for testing flatness and concentricity
• ABS (display can be set to zero
without losing reference to
preset)
• DATA (Data transmission via
connection cable)
• Factor (adjustable)
• LOCK (individual button lock)
6
c
Accessories
8
Order no. Product name
Product type
​
​
4884464
Battery 3 V, Type CR 2450
​
4102357
16 EXu
4102915
16 EXu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
Digimatic data cable (2 m)
4102410
Data Connection Cable RS232C (2 m)
16 EXr
4375004
Protective cap for 1075 R / 1086 R / 1087 R
1086 s
4337421
Lug back
1086 b
4336230
Pneumatic lifting (50 + 100 mm)
1082 p
4310103
Adapter bush (.375“ / 8 mm)
940
Mahr | New Products 2017
16 EWd
1082 p
21
b
1086 b
ø8h6
(ø3/8")
ø4
M2,5
(4-48 UNF)
MarCator 1087 Ri. Digital Indicator
Functions
• 0 (set the analog display to zero)
• ABS (display can be set to zero
without losing reference to
preset)
• AUTO-ON / OFF
• DATA (Data transmission via
connection cable)
• Factor (adjustable)
• LOCK (individual button lock)
• MAX/MIN memory for searching
the reversal point
• ON/OFF
• PRESET (for entering a numerical
value)
• RANGE (switch the measuring
range and resolution)
• RESET (set display to zero)
• TIR (MAX-MIN) for testing flatness and concentricity
• TOL (enter tolerance limit values)
• Reversal of counting direction
• mm/inch
• Software: MarCom Professional
free download:
www.mahr.com/marcom
(only for Mahr data cables and
wireless systems with USB and
RS232 interface)
• Digit height: 8,5 mm
• Data interface: Digimatic, Opto
RS232C, USB, Integrated wireless
• Energy supply: Battery operation
• IP protection category: IP 42
• Scope of delivery: Instruction
manual, Battery
0
RS232C
Digimatic
MAX
MIN
TOL
MarConnect
ABS
integrated
wireless
​
Technical Data
Order no.
4337667
Product type
​
1087 Ri
Measuring span
mm
50
Resolution
mm
0,0005, 0,001, 0,002, 0,005, 0,01
Resolution
inch
.00002“, .00005“, .0001“, .0002“, .0005“
Graduation values
mm
0,001, 0,002, 0,005, 0,01, 0,02, 0,05
Range of analog display
mm
± 0,01, ± 0,02, ± 0,04, ± 0,1, ± 0,2
Error limit
mm
0,007
Error limit over 50 graduations
mm
0,002
Repeatability
mm
0,001
Measuring force
N
1,25 – 2,7
Standard
​
Factory standard
Lifting protection cap
​
•
Order no.
a
b
c
Mounting shaft
mm
mm
mm
mm
267,3
40
52
8
​
4337667
Accessories
Order no. Product name
Product type
​
​
4884464
Battery 3 V, Type CR 2450
​
4102357
16 EXu
4102915
16 EXu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
Digimatic data cable (2 m)
4102410
Data Connection Cable RS232C (2 m)
16 EXr
4375004
Protective cap for 1075 R / 1086 R / 1087 R
1086 s
4337421
Lug back
1086 b
4336230
Pneumatic lifting (50 + 100 mm)
1082 p
4310103
Adapter bush (.375“ / 8 mm)
940
16 EWd
Mahr | New Products 2017
1082 p
9
Millimar C 1700 PC. Gaging computer
• Interactive, touch-capable
Software
• Simple and intuitive user
interface
• Userfriendly setup of measuring
tasks
• Simple operation via predefined
formulas for most common
features
• Management of measuring tasks
• Assignment of pictures or
drawings per measuring task
• Static and dynamic
measurements
• Supported by graphical control
elements
• Live-indication of measuring
values and features
• Digital and Analog displays for
simultaneous indication of up to
128 features
• Connection of Mahr digital
probes (USB) as well as Mahr
instruments with USB-interface
• Connection of Mahr instruments
with Integrated-Wireless
• Data export in MS-Excel or in
qs-Stat-format (dfq, dfx or dfdformat)
• Password protected user levels
(3 levels)
• Online-help (operating
instruction) integrated in Cockpit
software
• Scope of delivery: Millimar
Cockpit Software incl. 10,1“
Touch-PC, Preinstalled Windows
10 IoT Enterprise, Mahr
license key, Installation disk,
Recovery-Stick 16 GB, Operating
instructions (online help), Mains
adapter, VESA 100 standard
stand
Application:
Comfortable measuring computer with an smart and universell applicable
software for complex measuring tasks in the production area
Technical Data
Order no.
​
C 1700 PC
Display
​
Vertikale Balkenanzeige
Horizontale Balkenanzeige
Analoganzeige bzw. Rundskale
Digitalanzeige
Anzeigearten pro Merkmal frei kombinierbar
± 1000
Range of digital display
mm
Range of analog display
µm
Resolution
µm
± 10000, ± 5000, ± 2000, ± 1000, ± 500, ± 200, ± 100, ± 50, ± 20, ±
10
0,01
Length units
​
mm, µm, inch
Angle units
​
degrees, radians
Tolerance display
​
Obere u. untere Toleranzgrenze (pro Merkmal)
Obere u. untere Warngrenze (pro Merkmal)
Compatibility
​
USB, Integrated wireless, Millimar N 1700
Measuring combination
​
Features
​
Vordefinierte Formelvorlagen für Standardmerkmale
Eingabe der Verknüpfungen über umfangreichen Formeleditor
128
Feature types
​
Length, Angle, dimensionless
Dynamic functions
​
MAX, MIN, MAX-MIN, MAX+MIN
Classification
​
max. 20 Klassen
mm
Abhängig vom Messgerät
Number of connectable wireless
receivers for i-stick
Number of connectable measuring instruments with integrated
wireless
Number of connectable measuring instruments with USB
interface
Data export
​
1
​
8
​
64
​
qs-Stat, Excel
Hardware interfaces
​
Energy supply:
​
1x USB 3.0, 3x USB 2.0, 2x COM port Full-PIN (RS232/485; 5V/12V),
2x COM 2x COM port 3-PIN (RX, TX, GND; RS232/485 switchable), 2×
10/100/1000Mbit RJ45 Ports; 2x W-LAN connector, VGA, Display port
100– 240V ACDC active switching; 12V DC-Out
Power consumption
​
18
IP protection category:
​
IP 65 (Front Panel)
Languages:
​
German, English, Chinese, French, Russian, Czech
System requirements:
​
2 free USB 2.0 interfaces
kg
2,00
Measuring range
Product weight
10
5312801
Product type
Mahr | New Products 2017
Millimar C 1700 PC. Gaging computer
Accessories
Order no. Product name
Product type
​
​
5331130
USB connecting module
N 1701 USB
5331120
Module for inductive probes
N 1702 M
5331133
Power supply module
N 1701 PS
5331134
I/O module
N 1704 I/O
4102220
Receiver incl. Software MarCom Std.
i-Stick
4102357
16 EXu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
2000 usb Data connection cable USB (2 m)
incl. Software MarCom Std.
800 EWu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
Millimar - USB Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
Opto usb Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
817 usb Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
16 EXu
4346023
4305121
4102331
4102330
4102333
N 1702 M
N 1701 PS
2000 usb
800 EWu
Millimar - USB
Opto usb
817 usb
N 1701 USB
N 1704 I/O
Mahr | New Products 2017
11
Millimar Cockpit. Measuring software
• Interactive, touch-capable
software
• Very simple and intuitive to use
• User-friendly creation of
measuring tasks
• Access to predefined formula
templates for maximum ease
of use
• Management of measuring tasks
(save and load function)
• Measuring task linked to images
or drawings
• Static and dynamic recording of
measuring values
• Supported by graphical
operating elements
• Live visualization of measured
values
• Simultaneous digital and analog
displays of up to 128 features
• Connection of inductive probes
and Mahr measuring instruments
via USB interface
• Connection of Mahr measuring
instruments via Integrated
Wireless
• Data export in MS Excel or qsStat format (dfq or dfx/dfd
format)
• Password-protected user levels
(3 levels)
• Online help (operating
instructions) can be accessed
directly from the software
• Scope of delivery: Mahr license
key, Installation disk, Operating
instructions (online help)
Application:
Smart, universal software for complex measuring
tasks in the manufacturing sector
Technical Data
Order no.
​
Cockpit
Display
​
Vertical bar graph
Horizontal bar graph
Analog display or round scale
Digital display
Any combination of display types can be chosen for each feature
± 1000
Range of digital display
mm
Range of analog display
µm
Resolution
µm
± 10000, ± 5000, ± 2000, ± 1000, ± 500, ± 200, ± 100, ± 50, ± 20, ±
10
0,01
Length units
​
mm, µm, inch
Angle units
​
degrees, radians
Tolerance display
​
Upper and lower tolerance limit (per feature)
Upper and lower warning limit (per feature)
Compatibility
​
USB, Integrated wireless, Millimar N 1700
Measuring combination
​
Features
​
Predefined formula templates for standard features
Links entered via comprehensive formula editor
128
Feature types
​
Length, Angle, dimensionless
Dynamic functions
​
MAX, MIN, MAX-MIN, MAX+MIN
Classification
Measuring range
Number of connectable wireless
receivers for i-stick
Number of connectable measuring instruments with integrated
wireless
Number of connectable measuring instruments with USB
interface
Data export
12
5312800
Product type
​
max. 20 classes
mm
Dependent on measuring instrument
​
1
​
8
​
64
​
qs-Stat, Excel
Languages:
​
German, English, Chinese, French, Russian, Czech
System requirements:
​
MS Windows 10, MS Windows 8, MS Windows 7, 2 free USB 2.0 interfaces
Mahr | New Products 2017
Millimar Cockpit. Measuring software
Accessories
Order no. Product name
Product type
​
​
5331130
USB connecting module
N 1701 USB
5331120
Module for inductive probes
N 1702 M
5331133
Power supply module
N 1701 PS
5331134
I/O module
N 1704 I/O
4102220
Receiver incl. Software MarCom Std.
i-Stick
4102357
16 EXu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
2000 usb Data connection cable USB (2 m)
incl. Software MarCom Std.
800 EWu Data Connection Cable USB (2 m)
incl. Software MarCom Std.
Millimar - USB Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
Opto usb Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
817 usb Adapter Cable RS232-USB (1 m)
incl. Software MarCom Std.
16 EXu
4346023
4305121
4102331
4102330
4102333
N 1702 M
N 1701 PS
2000 usb
800 EWu
Millimar - USB
Opto usb
817 usb
N 1701 USB
N 1704 I/O
i-Stick
Mahr | New Products 2017
13
Millimar N 1702 M. Module for inductive probes
• Flexibel combination of RS485Bus-Modules
• Capable modules for the
evaluation of measurings sensors
• Synchronous data enquiry of
multiple connected sensors
• Ability to connect the N 1700
modules to the smart &
universally applicable Millimar
Cockpit Software
• Connection of all types of
measuring sensors within the
same compatibility
• Modular and customizable
selection of product
combinations for solving each
customer specific measuring
tasks
• Theoretical Bus data rate of
max. 4189 values per second
(depending on the number of
connected channels)
• Scope of delivery: Instruction
manual
Application:
Smart and flexible combination of modules and software for solving each
customer specific measuring task.
Technical Data
Order no.
Product type
N 1702 M
Storage temperature MAX
°C
60
Storage temperature MIN
°C
– 10
Resolution
µm
0,1
Measuring range, inductive probe
µm
± 2000, ± 5000
Probe inputs
​
2
Compatibility
​
Mahr, Mahr 1340, Mahr-Half bridge, Mahr-LVDT, Mahr-VLDT
Values per
second
​
4189
0,3 % (min. 0,2 μm)
​
RS485
Current consuption
mA
110
Working temperature MIN
°C
10
Working temperature MAX
°C
35
Operating temperature Min
°C
0
Operating temperature Max
°C
40
Data transmission rate:
Error limit
Data interface:
14
5331120
​
Mahr | New Products 2017
Millimar N 1702 M. Module for inductive probes
Accessories
Order no. Product name
Product type
​
​
5313010
Inductive Probe, ± 1 mm
1301
5313030
Inductive Probe, ± 1 mm
1303
5313049
Inductive Probe, ± 1 mm
1304 K
5313180
Inductive Probe, – 0,3 . . . 1 mm
1318
5313400
Inductive Probe, ± 2 mm
1340
4400180
Inductive Probe, ± 2 mm
P1300 MA
4400182
Inductive Probe, ± 2 mm
P1300 MA without cable
4400181
Inductive Probe, ± 2 mm
P1300 MB
4400183
Inductive Probe, ± 2 mm
P1300 MB without cable
5323040
Inductive Probe, ± 0,5 mm
P2001 M
5323010
Inductive Probe, ± 2 mm
P2004 M
5323020
Inductive Probe, ± 2 mm
P2004 MA
5323030
Inductive Probe, ± 2 mm
P2004 MB
5324010
Inductive Probe, ± 5 mm
P2010 M
5324020
Inductive Probe, ± 5 mm
P2010 MA
5324030
Inductive Probe, ± 5 mm
P2010 MB
5324070
Inductive Probe, ± 2 mm
P2104 MA
5324080
Inductive Probe, ± 2 mm
P2104 MB
P2001
1340
1318
1303
1304 K
P1300 MB
without cable
P1300 MB
P2104 B
P2104 A
P2010 B
P2010 A
P2004
P2004 A
P2004 B
P2010
P1300 MA
without cable
P1300 MA
Mahr | New Products 2017
15
Millimar N 1701 PS. Power supply module
• Flexibel combination of
RS485-Bus-Modules
• Capable modules for the evaluation of measurings sensors
• Synchronous data enquiry of
multiple connected sensors
• Ability to connect the N 1700
modules to the smart & universally applicable Millimar Cockpit
Software
• Connection of all types of measuring sensors within the same
compatibility
• Modular and customizable selection of product combinations for
solving each customer specific
measuring tasks
• Theoretical Bus data rate of max.
4189 values per second (depending on the number of connected channels)
• Scope of deliveryMains adapter,
Instruction manual
Application:
Smart and flexible combination of modules and software
for solving each customer specific measuring task.
Technical Data
Order no.
Product type
16
5331133
​
N 1701 PS
Data interface:
​
RS485
Energy supply:
​
230 V/115 V; 50/60 Hz
Current supply
mA
2000
Mahr | New Products 2017
Millimar N 1701 USB. USB connecting module
• Flexibel combination of
RS485-Bus-Modules
• Capable modules for the evaluation of measurings sensors
• Synchronous data enquiry of
multiple connected sensors
• Ability to connect the N 1700
modules to the smart & universally applicable Millimar Cockpit
Software
• Connection of all types of measuring sensors within the same
compatibility
• Modular and customizable selection of product combinations for
solving each customer specific
measuring tasks
• Theoretical Bus data rate of max.
4189 values per second (depending on the number of connected channels)
• Scope of deliveryEnd module,
Instruction manual, USB-cable
Application:
Smart and flexible combination of modules and software
for solving each customer specific measuring task.
Technical Data
Order no.
5331130
Product type
​
N 1701 USB
Data interface:
​
RS485
Current supply
mA
430
Accessories
Order no. Product name
Product type
​
​
4102058
Foot Switch to trigger data transmission
16 ESf
​
Mahr | New Products 2017
17
Millimar N 1704 I/O. I/O module
• Flexibel combination of
RS485-Bus-Modules
• Capable modules for the evaluation of measurings sensors
• Synchronous data enquiry of
multiple connected sensors
• Ability to connect the N 1700
modules to the smart & universally applicable Millimar Cockpit
Software
• Connection of all types of measuring sensors within the same
compatibility
• Modular and customizable selection of product combinations for
solving each customer specific
measuring tasks
• Theoretical Bus data rate of max.
4189 values per second (depending on the number of connected channels)
• Scope of deliveryPlug connectors, Instruction manual
Application:
Smart and flexible combination of modules and software
for solving each customer specific measuring task.
Technical Data
Order no.
Product type
N 1704 I/O
Data interface:
​
RS485
Control inputs
​
4 inputs, 10 – 30 V
Control outputs
​
4 Ausgänge, 10 – 30 V
ESD protected, short-circuit proof
70
Current consuption
18
5331134
​
Mahr | New Products 2017
mA
Multimar 844 S. Setting device
• Simple handling via clamping
element
• Accurate setting of nominal
value using gage block combinations
• Instrument setting in horizontal
or vertical position (using base
844 Sf)
• Rigid base made of anodized
aluminum, for mobile or stationary use in the production or in
the inspection room
• Scope of delivery: Basic unit
844 S, Instruction manual
Application:
For setting indicating instruments for internal and external dimensions
i. e. Multimar 844 T and Marameter 844 N at any dimension by using
gage block combinations.
Technical Data
Order no.
4503500
Product type
Application range for inside
measurement from
Application range for inside
measurement up to
4503501
​
844 S
mm
0
mm
400
1150
4503502
2180
Accessories
Order no. Product name
Product type
​
​
4503510
T-shaped gage blocks (20mm) for measuring depth up to 40 mm
844 Sp
4503511
Riser blocks 30mm for extended measuring depths
844 Sph
4474080
Adjustment bridge (70 x 12 mm), for measuring range 18 – 250 mm
844 Neb
4474081
Adjustment bridge (165 x 17 mm), for measuring range 18 – 400 mm
844 Neb
4470095
Measuring jaw for holder 420 h
844 em
4503512
Fuß für Vertikaleinsatz, inkl. Schrauben und 2 Tischklemmen
844 Sf
4474082
Adjustment bridge (320 x 20 mm), for measuring range 18 – 800 mm
844 Neb
844 Sf
844 Sp
844 em
844 Neb
Mahr | New Products 2017
844 Sph
19
Precimar 826 PC. Gage block measuring instrument
The 826 PC gage block measuring
instrument is quick, reliable and
highly accurate. An open and
extremely rigid L-shaped stand
forms the base for the two
counteracting precision measuring
probes and the absolutely level
measuring table.
• Rigid cast stand for temperature
stability and heat resistance
• Fast adjustment of vertical slide
with top probe
• Highly ergonomic, user-friendly
one-handed operation to
position the gage blocks under
the measuring probe
• Precision adjustment via
torsionally rigid parallelogram
springs
• Electropneumatic lifting of
measuring probes
• Precision ball-bearing guides for
smooth manipulator actuation
• No influence on measurement
from hand force
• Round carbide precision support
pins make it easy to move the
gage blocks on the measuring
table
• Set value linked to the stored
actual deviation of the reference
gage block, avoiding the need
for zero point setting
With QM-Block software:
• Flattening correction
• Correction of differing
coefficients of expansion
• Mean-value generation
Technical Data
​
826 PC
Application range [mm]
0.5 to 170
Direct measuring range [mm]
0,2
Repeatability [µm]
± 0,01
Mass [kg]
Applications
• Quick and easy, high-precision testing of European
and US gage blocks up to 170 mm in length, as per
ISO 3650
37
Accessories
• QMSOFT® / QM-Block calibration software for the
calibration and data management of gage blocks
and gage block sets
• The evaluation program runs under Windows 7
Ultimate.
• Excellent thermal insulation with wraparound acrylic
glass screen
• 826 Va HS lifting device for fast and quiet pneumatic
lifting of inductive probes via foot switch
• Temperature compensation
• Pincers, gage block suction lifter, optical flat, lay-on
thermometer
For more information, please visit our website: www.mahr.com
20
Mahr | New Products 2017
Precimar Optimar 100 BV. Dial indicator test device
• OPTIMAR 100 with image
processing is the most costeffective test station for the
partially or fully automated
testing of dial indicators, dial
comparators and test indicators.
The retrofit kit for image
processing enables you to
complete your motorized dial
indicator test device with the
possibility of a fully automatic
reading of the displayed values
of the test objects (pointer or
numeric display) by camera and
image processing, which makes
the testing process considerably
easier.
• Easy to use
• Quick image processing due to
USB 3.0-camera
• Compact design
• Digital digit recognition
• Steady LED lighting which does
not require daylight
• No interface cable necessary
• During the automated testing
process, the released capacities
of the operator can be used for
other working tasks.
• Supplied with:
• Retrofit kit for Optimar 100 dial
indicator test device with image
processing consisting of:
• base unit
• USB 3.0 camera with lens incl.
cable
• Lighting unit complete with
plug-in power supply
• Software QMSOFT/QM-DIAL
Image Processing
Technical Data
​
Optimar 100 BV
Measuring range
0 – 100 mm
Measuring uncertainty MPEE1
(L in mm) [µm]
Digital numerical increment [µm]
≤ (0,2 + L/250)
0,02
Applications
• calibration of dial indicators, dial test indicators and dial
comparators
• The QMSOFT® software system controls the dial indicator
test device Optimar 100 and processes the camera image
(pointer or numeric display of the test object) and the
reference measuring values of the dial indicator test device
Optimar 100; it also performs all the subsequent processes
related to gauge management.
• The output of the inspection results are numerical data
lists and graphics showing the deviation course. Tolerance
excesses are marked and identified.
• Support the inspec­tion of this gauges according to the
worldwide mostly used standards.
For more information, please visit our website: www.mahr.com
Mahr | New Products 2017
21
Precimar PLM 1000-E. Precision length measuring machine
The PLM-E precision length
measuring machine is an Abbecompliant comparator with
horizontal base bed (highly
homogeneous, rigid granite)
• Sensitive adjustment in 5 axes,
and object table with a loading
capacity of 35 kg
• PC-based, multiaxis machine
control, including PC
workstation and 828 WIN „Free
measurement“ basic software
• Simple operating procedure by
means of measuring forceadjusted and joystick-controlled
measuring slides with progressive
deflection characteristic and
automatic contact detection
• Automatic detection of outside
and inside measurements and
computer-aided search for
reversal points
• The motorized measuring slide
allows for high travel speeds
• The CNC-controlled vertical and
cross adjustment of the universal
measuring table facilitates highly
efficient measuring
• State-of-the-art machine control
(MarEcon)
• Recording, processing, logging
and transfer of measurement
data via powerful software and
menu-driven controls
• Software compensation of
thermal dimensional deviations
• Very easy to set the measuring
force using the software
• Aerostatic guides for all slides
mounted on the machine
bed ensure low measurement
uncertainties
• Electronic generation of
measuring force and automatic
contacting
• Subjective influences largely
eliminated and unintended
collisions with the testpiece
avoided.
• Automatic bore and inner thread
measurement
• Automatic TY adjustment:
What’s unique is that a manual
TY-adjustment is still possible
• Motorized tilting axis (TB) for
alignment. Alignment is carried
out via the manual control panel
or using the 828 WIN software.
• A factory calibration or DAkkS/
DKD calibration is available for
the Precimar PLM-E
Technical Data
​
PLM 1000-E
Direct measuring range [mm]
200
Measuring range for outer
measurement [mm]
Measuring range for inner
measurement [mm]
Measuring uncertainty MPEE1
(L in mm) [µm]
Position deviation / error limit
(L in mm) [µm] *
Repeatability [µm]
0 to 1000
0,5 to 845
≤ (0,085 + L/1500)
≤ (0.07 + L/2000)
≤ 0.05
Measuring forces [N]
0 to 13,9
Device length [mm]
2110
Mass [kg]
535
* Proof can be carried out at the Göttingen site if required
Applications
Calibration of
• Plain plug gages and gage rings
• Setting gage rings
• Snap gages
• Spherical gage blocks, internal micrometers
• Gage blocks
• Thread gages
• Taper thread gages
• Gear gages
• Dial indicators
• Dial comparators
• 2-point bore gages
• Outside micrometers
• 2-point inside micrometers
• Precision length measurement
• Measurement of thin-walled and deformed
workpieces
Accessories
Large number of accessory kits and modular
components for solving a wide variety of measuring tasks, including the measurement of:
• Thread gages
• Conical thread gages
• Gears
• Thread pitches
For more information, please visit our website: www.mahr.com
22
Mahr | New Products 2017
MarSurf PS 10 C2. Mobile Roughness Measuring Instrument
„sMAHRtSurf“ - Simple, smart
and mobile
• Compact roughness measuring
instrument for mobile use
• Simple and intuitive to use: As
easy to use as a smart phone
• Large, illuminated 4.3“ TFT
touch display
• Adjustable display
• Start button also serves as the
Home button for direct access to
the start screen
• Data backup as TXT, X3P or
PDF file
• Creation of completed PDF
measuring records in the
measuring device
• Customer-specific comments for
the PDF measuring record are
entered directly into the MarSurf
PS 10
• Mains-independent operation:
Over 1200 measurements
without having to recharge the
instrument
• An all-in-one solution. Small and
lightweight (approx. 500 g)
• Instrument flexibility: Removable
drive unit
• All the measuring positions you
need: horizontal, vertical, upside
down
• 31 surface parameters offer the
same range of functions as a
laboratory instrument.
• Error-free operation thanks to an
integrated, removable roughness
standard
• Quick access to your frequently
used functions via the Favorites
list in the display
• Very short activation time: results
available within seconds
• Automatic cutoff selection, so
even non-specialists can be sure
of getting the correct measuring
results
• Scope of delivery
• MarSurf PS 10 unit
• Drive unit RD18C2 (detachable)
• Handheld Vee block
• 1 standard probe conforming to
standards
• Built-in rechargeable battery
• Roughness standard integrated
into housing (detachable),
including Mahr calibration
certificate
• Probe protection
• Charger / 3 adapters
• Operating instructions
• Carry case with shoulder strap
• USB cable
• Extension cable for drive unit
• Height adjustment (integrated)
Application:
• For transverse scanning i.e. on crank or camshafts
Technical Data
Order no.
6910235
Product type
​
PS 10 C2
Parameters
​
Stylus
​
Ra, Rq, Rz (Ry (JIS) is equivalent to Rz), Rz (JIS), Rmax, Rp, RpA (ASME),
Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, RPc, Rmr (tp (JIS,
ASME) is equivalent to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx
2 µm
Calibration function
​
dynamic; Ra, Rz, Rsm
Storage capacity
​
Languages:
​
Other
​
min. 3900 profiles, min. 500,000 results, min. 1500 PDF records,
expandable with microSD card up to 32 GB
German, English, French, Italian, Spanish, Portugese, Dutch, Swedish,
Russian, Polish, Czech, Japanese, Chinese, Korean, Hungarian, Turkish,
Romanian
Lock/password protected, date/time
Data interface:
​
USB, MarConnect (RS232), microSD slot for SD / SDHC cards up to 32 GB
System of protection
​
IP 40
Rechargeable batteries
​
Lithium-ion battery, min. 1200 measurements
Wide range power supply
HxWxD
Weight
Measuring principle
Probe
​
100 to 264 V
mm
160 mm x 77 mm x 50 mm
kg
0,49
​
Stylus method
​
inductive skidded probe
Measuring range
mm
0.350
Profile resolution
​
8 nm
Filter according to ISO/JIS
​
Cutoff Ic according to ISO/JIS
​
Gaussian filter as per ISO 16610– 21 (formerly ISO 11562), special filter as
per DIN EN ISO 13565– 1, Lambda s filter as per DIN EN ISO 3274 (can be
switched off)
0,25 mm, 0,8 mm, 2,5 mm, automatic filter detection
Number n of sampling length
according to ISO/JIS
Short stroke under ISO/JIS
​
selectable: 1 to 16
​
selectable
Traversing length Lt according
ISO/JIS
Traversing length according ISO
12085 (MOTIF)
Evaluation lenth In according to
ISO/JIS
Measuring force
​
1.5 mm, 4.8 mm, N x Lc, variable, automatical
​
1 mm, 2 mm, 4 mm
​
1.25 mm, 4.0 mm
N
0.00075
Mahr | New Products 2017
23
MarSurf PS 10 C2. Mobile Roughness Measuring Instrument
Accessories
Order no. Product description
Product type
​
​
​
6850738
Collet chucks for RD 18 C2 / PFM– 2 for ø 5 – 80 mm
RD 18 C2
6111520
Standard probe 2 µm
PHT 6– 350
6111526
Standard probe 5 µm
PHT 6– 350/ 5µm
6111527
Standard probe 10 µm
PHT 6– 350/ 10µm
6111521
Probe for bores with a dia. larger than 3 mm
PHT 3– 350
6111524
Probe for grooves
PHT 11– 100
6820420
Roughness standard with Mahr calibration certificate,
profile depth 10 µm
Geometric Standard with sinusoidal groove profile,
Profiltiefe 1,5 µm
Geometric Standard with sinusoidal groove profile,
Profiltiefe 3 µm
Geometric Standard with sinusoidal groove profile,
Profiltiefe 10 µm
Mahr-calibration certificate for PGN Standard
PRN 10
PGN
4102357
DKD (German Calibration Service) calibration
certificate for PGN Standard
Data Connection Cable USB
4102410
Data Connection Cable RS232C
16 EXr
4102231
Transmitter
16 EWe
4102230
Receiver
e-Stick
6910209
Mount MarSurf PS 10 on measuring stand ST
ST-a3
6710803
Measuring stand 300 mm with cast iron base
ST-D
6710806
Measuring stand 300 mm with granite plate
ST-F
6710807
Measuring stand 300 mm with granite plate and T-slot ST-G
2247086
Adjustable mounting bracket to connect to 814 SR
814 Sh
4426100
Height Measuring and Scribing Instrument
814 SR
4426101
Height Measuring and Scribing Instrument
814 SR
6910435
ST-a2
4413000
RD 18 C / PS 10 upright holder for cylindrical drive
unit, Ø 8 mm
Indicator Stand with Base
4413001
Indicator Stand with Base
815 GN
4413005
Indicator Stand with Base
815 GN
4416000
Indicator Stand with Magnetic Base
815 MA
6299054
Evaluation Software
SW XR 20
6820602
6820601
6820605
9027715
6980102
e-Stick
ST-G
24
Mahr | New Products 2017
16 EWe
ST-F
814 SR
ST-D
PGN 1
PGN 3
PGN 10
PGN
16 EXu
815 GN
814 Sh
PHT 6– 350
MarGear GMX 400 W. Universal gear measuring center
Precision, fully automatic testing
of gears and gear cutting tools up
to an outer diameter of 400 mm.
Combining gear measuring tasks
with various form & position
features has never been easier.
With over 6000 units sold, the
MarWin environment is a clear
and simple way of creating
complete programs in Teach In
mode.
This improves programming
efficiency and reduces the
possibility of incorrect use.
Proven GMX realtime machine
error correction is also used for
positioning movements with
the new MarEcon control unit,
guaranteeing maximum speed
and precision throughout the
entire measuring and movement
sequence.
Gear and form measurements
carried out on a single measuring
instrument.
High-precision 3D scanning
sensor combined with directly
driven C-axis for accuracy and
efficiency
Control unit
5-axis control unit
With the long tailstock option
transmission shafts up to 700 mm
can be clamped.
Inspection features
• Straight and helical toothed
cylindrical gears
• GDE interface for inner and
outer gears
• Data export to QS-STAT
• Form and position measurements
• 3D geometries such as distances,
cone angles, etc.
Accuracy
MarGear GMX 400 W
Gear measuring instrument,
accuracy class 1, for gear
measurements in accordance with
VDI/VDE 2612/2613 Group 1 at
20°C ± 2 K
(Rotational axis in Formtester
accuracy)
Technical Data
GMX 400 W
Measuring path (mm), X-axis
200
Measuring path (mm), Y-axis
200
Measuring path (mm), Z-axis
320
Diameter max.* [mm]
400
Length
1560
Width
600
Height
1787
Mass [kg]
700
Max. workpiece weight [kg]
Accuracy
Axial run-out deviation (µm+µm/mm
measuring radius)
Radial run-out deviation (µm in table
height)
60 (80 on request)
Accuracy class I for gear measurements in accordance with VDI/VDE 2612/2613
Group 1 at 20°C ± 2°C
0.11 µm + 0.0008 µm/mm
≤ 0.11 µm
* max. diameter of cylindrical gears
Applications
• Basic measuring station with AdvancedForm
software
• Suitable for use as a gear measuring station
with QE Cylindrical Gear
Accessories
• Active vibration damping system
• Revolving counter-tip
• Data matrix scanner
• Chuck 70 mm
• Chuck 200 mm
• Drive pin set
• Tailstock 450 mm or 700 mm
For more information, please visit our website: www.mahr.com
Mahr | New Products 2017
25
MarGear GMX 400 ZLW. Universal gear measuring center
Precision, fully automatic testing
of gears and gear cutting tools up
to an outer diameter of 400 mm.
Combining gear measuring tasks
with various form & position
features has never been easier.
With over 6000 units sold, the
MarWin environment is a clear
and simple way of creating
complete programs in Teach In
mode.
This improves programming
efficiency and reduces the
possibility of incorrect use.
Proven GMX realtime machine
error correction is also used for
positioning movements with
the new MarEcon control unit,
guaranteeing maximum speed
and precision throughout the
entire measuring and movement
sequence.
Gear and form measurements
carried out on a single measuring
instrument.
Technical Data
GMX 400 ZLW
High-precision 3D scanning
sensor combined with directly
driven C-axis for accuracy and
efficiency
Control unit
5-axis control unit
Measuring path (mm), X-axis
200
Measuring path (mm), Y-axis
200
Measuring path (mm), Z-axis
650
Diameter max.* [mm]
400
Length
1560
Width
600
With the long tailstock option
transmission shafts up to 700 mm
can be clamped.
Height
2147
Inspection features
Accuracy
Mass [kg]
• Straight and helical toothed
cylindrical gears
• GDE interface for inner and
outer gears
• Data export to QS-STAT
• Form and position measurements
• 3D geometries such as distances,
cone angles, etc.
Accuracy
MarGear GMX 400 ZLW
Gear measuring instrument,
accuracy class 1, for gear
measurements in accordance with
VDI/VDE 2612/2613 Group 1 at
20°C ± 2 K
(Rotational axis in Formtester
accuracy)
750
Max. workpiece weight [kg]
Axial run-out deviation (µm+µm/mm
measuring radius)
Radial run-out deviation (µm in table
height)
60 (80 on request)
Accuracy class I for gear measurements in accordance with VDI/VDE 2612/2613
Group 1 at 20°C ± 2°C
0.11 µm + 0.0008 µm/mm
≤ 0.11 µm
* max. diameter of cylindrical gears
Applications
• Basic measuring station with AdvancedForm
software
• Suitable for use as a gear measuring station
with QE Cylindrical Gear
Accessories
• Active vibration damping system
• Revolving counter-tip
• Data matrix scanner
• Chuck 70 mm
• Chuck 200 mm
• Drive pin set
For more information, please visit our website: www.mahr.com
26
Mahr | New Products 2017
​
MarGear. MarWin Software solutions
• In addition to simple controls,
the new software offers users a
variety of interfaces to simplify
automation of the measuring
procedure. When you import
gear data, in GDE format for
example, the software creates a
3D model of the gear for visual
inspection and checks the tooth
geometry for plausibility. This
further reduces the possibility of
operator errors.
Software highlights
• The intuitive „QE Cylindrical
Gear“ user interface provides
a number of interfaces for
importing and exporting data.
• Using the QEP interface
(Quick&Easy profile) you can
archive profile and results data
relating to a gear measurement
in MarWin format and then
reload it subsequently for
evaluation.
• The new „QE Cylindrical Gear“
module is the latest measuring
module to be added to the
MarWin platform. Q&E modules
from the MarWin system can be
linked together quickly and easily
to create a complete program
for a transmission shaft, for
example.
For more information, please visit our website: www.mahr.com
Mahr | New Products 2017
27
MarShaft SCOPE 250 plus
• The role of dimensional
metrology is expanding at a
dramatic rate, in parallel with
innovations in manufacturing
processes. Given the ever
more stringent accuracy
requirements and falling
cycle times in production
(turning, milling, grinding,
etc.), rapid measurement
directly at the manufacturing
machine is absolutely essential.
Measurement at the point
of origin of the product,
with rapid feedback to the
manufacturing process to
avoid waste. Mahr’s flexible
MarShaft SCOPE 250 plus shaft
measuring machine offers the
right measuring solution for the
fast, precise and fully automatic
measurement of rotationally
symmetrical workpieces in
production.
• The MarShaft SCOPE 250 plus
has a high precision roundness
measuring axis (C) and a vertical
measuring axis (Z) with a
measuring range of 250 mm. At
its heart is the state-of-the-art,
high-resolution CMOS matrix
camera (live image) with an
image field of 1088 x 2048 mm.
The extremely high image
acquisition rate of over 120
images per second keeps
measuring times to a minimum.
Zoom functions allow the
smallest details to be measured,
which with conventional
measuring methods are difficult
if not impossible to test.
Performance features at a
glance:
​
Technical Data
MarShaft SCOPE 250 plus
Measuring range length (Z) (mm)
250
Measuring range diameter (X) (mm)
Length/diameter resolution (mm)
Angle resolution (°)
Length error limit (Z) (µm)
Diameter error limit (X) (µm)
Lens
40
0.01...0.0001
0.01...0.0001
≤ (3.0+l/125) L in mm
≤ (1.5+l/40) L in mm
Telecentric precision optics
High-resolution CMOS camera
Applications
The main measurable features
• New, high-resolution CMOS
matrix camera with a 40 mm live
image field allows fast scanning
with over 120 images per second
• High accuracy for diameter and
length measurement
• Extremely fast measuring times
thanks to high measuring speeds
of up to 200 mm/s
• By using Mahr’s MarWin
software platform, you can
benefit from our decades
of experience in length,
shape, position and contour
measurement
• Affordable entry-level price into
the small optical shaft measuring
machine segment
• Length
• Diameter
• Form and position tolerances
• Offsets
• Recess width
• Bevel width
• Intersection points
• Position of intersection points
• Angles of rotation
• Radii
• Position of radii
• Taper lengths
• Angles
• Pitches
• Widths across flats
• Outer threads
For more information, please visit our website: www.mahr.com
28
Mahr | New Products 2017
MarShaft. Scope 600 plus 3D
• Mahr is pleased to provide a new
measurement method for the
special camshaft application
using the new MarShaft SCOPE
600 plus 3D: A combination
of optical and touch sensors
allow for a first ever functionally
complete 3D Inspection of the
workpiece. Due to this market
need Mahr further developed
our highly anticipated and
received MarShaft SCOPE 750
plus System. The advanced
System now utilizes a new
2D Touch Probe, a motorized
tailstock and a calibration for
the linear axes. A Matrix camera
optically measures characteristics
such as diameters, lengths,
radii, geometries, location
characteristics, cam angle or cam
lift in seconds. The additional
2D Sensor detects features that
are not optically measurable:
concave cam shapes, axial run
out on large shoulders, reference
elements in the axial direction
such as blind holes. For this
system, the tactile and optical
systems are aligned/adjusted
to exist within one measuring
coordinate system. This unit
operates in conjunction with the
MarWin software platform, thus
providing full 3D functionality.
Features:
• Complete measuring of
camshafts, including cam angle
and all cam profiles
• Measurement of conturs
• No use of radial drivers
• Direct measurement of
reference ( 2 flat,, blind borehole
or keyway)
• Measurement of keyway
grooves
• Measurement of blind boreholes
• 100% 3D function with the
new 2D probesystem 1320– 2
• Additional Y- measuring axis
• Special calibration of the linear
axis (Z-X-Y)
• MarShaf Professional Software
• Manual panel
​
Technical Data
MarShaft SCOPE 600 plus 3D
Measuring range length (Z) (mm)
600
Measuring range diameter (X) (mm)
120
Workpiece weight (max.) in kg
Length/diameter resolution (mm)
Angle resolution (°)
15
0.01 to 0.0001
0.01 to 0.0001
Length error limit (Z) (µm)
(2,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Diameter error limit (X) (µm)
(1,0 + L/125) L in mm (at 20 °C ± 1 °C on reference standard)
Drive
Servo motors
Lens
Telecentric precision lens High-resolution CCD array
Applications
Complete measurement of camshafts
Typical workpieces
• Camshaft
• Eccentric shafts
• Shafts with keyways or blind boreholes
Options:
• Barcode-Scanner
• Signal light (red, yellow, green)
• Coated tip (no driver required)
• Vibration isolation system
• Temperature compensation
• Thread Measurement
• Turbocharger shaft measurement
For more information, please visit our website: www.mahr.com
Mahr | New Products 2017
29
Partner for manufacturing companies worldwide.
Close to our customers.
   
8
Mahr GmbH
Carl-Mahr-Straße 1, 37073 Göttingen, Germany
Reutlinger Str. 48, 73728 Esslingen , Germany
Telefon +49 551 7073-800, Fax +49 551 7073-888
info@mahr.de, www.mahr.com
© Mahr GmbH
We reserve the right to make changes to our products, especially due to technical improvements and
further developments. All illustrations and technical
data are therefore without guarantee. All list prices
are the recommended retail prices.
3723186 | 04.2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising