ODYS PRIME

ODYS PRIME

Content

1 Important Safety Instructions..................................................................

3

2 Mounting – dismantling ..........................................................................

2.1 Stand mounting ........................................................................................

2.2 Wall mounting...........................................................................................

6

7

3 Front and Rear Panel Illustration ............................................................

6

8

3.1 Front panel and Keyboard ........................................................................

3.2 Rear connection board .............................................................................

3.3 Remote Control ......................................................................................

8

9

10

12 4 System Connections ............................................................................

4.1 Connecting a USB Devices for playing media files .................................

4.2 Connecting to PC ...................................................................................

4.3 Connecting to TV-Signal Input................................................................

13

15

16

5 Input Source Selection .........................................................................

17

6 First commissioning .............................................................................

6.1 Mode selection .......................................................................................

6.2 Installation Guide (DVB-T, ATV).............................................................

7 TV operation and system setup............................................................

7.1 Channel menu ........................................................................................

18

18

19

20

20

7.1.1

Auto Scan ........................................................................................

20

7.1.2

Manual channel tuning .....................................................................

21

7.1.3

Program Edit....................................................................................

22

7.1.4

Signal information..............................................................................

22

7.1.5

Software Update ..............................................................................

22

7.1.6

PVR (Record functions)......................................................................

23

7.2 Picture menu ........................................................................................

7.3 Sound menu ...........................................................................................

7.4 Time menu .............................................................................................

7.5 Option menu .........................................................................................

7.6 Lock menu ............................................................................................

8 Other functions.....................................................................................

8.1 Hotel Mode.............................................................................................

8.2 Program list ............................................................................................

8.3 Favorite liste ...........................................................................................

8.4 Teletext...................................................................................................

8.5 EPG Menu (Electronic Program Guide). .................................................

8.6 Program Information...............................................................................

8.7 NICAM/A2................................................................................................

8.8 Subtitle ...................................................................................................

9 Troubleshooting ...................................................................................

24

25

26

27

28

29

31

32

32

32

29

29

30

30

33

ODYS PRIME

Content

10 Input Source Selection .........................................................................

11 First installation guide...........................................................................

11.1 Mode selection............................................................................................

34

35

11.2 Installation Guide (DVB-T, ATV).................................................................

11.3 Installation Guide (SMART TV) ..................................................................

35

35

36

12 Android Smart TV Operation ................................................................

37

12.1 First Installation wizzard..............................................................................

12.2 Main Interface .............................................................................................

12.3 Main Menu ..................................................................................................

38

39

39

12.4 Main interface configuration........................................................................

12.5 Remote Control – Android Functions .........................................................

12.6 Using the Remote Control.........................................................................

39

40

41

12.7 Using Mouse/Keyboard...............................................................................

41

12.8 Installing Memory Card...............................................................................

12.9 App Manager - Display all Applications ....................................................

42

42

12.10 Launching the Web browser .......................................................................

43

12.11 Using the Media-Player...............................................................................

45

45

12.12 Notifications..............................................................................................

46

46

46

12.13

System Settings......................................................................................

46

12.13.1 Wifi Settings - Configuring WIFI Connection...........................................

12.13.2 Ethernet...................................................................................................

47

49

12.13.3 Applications..............................................................................................

12.13.4 Factory data reset...................................................................................

12.13.5 Storage....................................................................................................

12.13.6 Language keyboard................................................................................

12.13.7 System upgrade.......................................................................................

12.13.8 Date& time................................................................................................

49

12.13.9 About device.............................................................................................

13 Specifications

14 Glossary

.....................................................................................

............................................................................................

15 Warranty condition

49

49

49

49

49

49

51

52

53

2

ODYS PRIME

ODYS PRIME

1 Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in accordance with the instructions.

8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lighting storms or when unused for long periods of time.

13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles, should be placed on the apparatus.

17) Attention should be drawn to the environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

The symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

3

ODYS PRIME

Warning

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Caution

Do not trap the power supply cord under the television receiver.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it should fall.

When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

4

ODYS PRIME

Tips regarding environmental protection

At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must be delivered to a collection point for recycling electrical and electronic equipment. The icon on the product, in the operating instructions or on the packaging, indicates this.

The materials used in manufacturing this product are recyclable, depending on their identifying markings. By recycling this equipment, by recycling its components, or through other procedures of re-using outdated equipment, you are making an important contribution to protection our environment. Please ask you local municipal administration for the location of the corresponding recycling point.

Battery Recycling

In order to ensure the environmentally friendly disposal of batteries, please do NOT dispose of used batteries through normal household waste. Please take the batteries to your local retail or community collection point for recycling.

The following may be an indication of a discharged battery: The device cannot be switched on. The device switches off automatically and "Battery Empty" is shown in the display. The device and or battery do not function properly.

Support

URL: http:// www.odys.de

See our website for the latest information on this engine, on other products by our company and on our company itself. If you have questions or problems, please read the FAQs on our website or contact our customer support service [email protected]

.

Appropriate use

The device is designed for receiving and watching unencrypted and crypted DVB-T and analogue TV channels for private use. It is exclusively meant for this purpose and must only be used for the same. This also includes paying attention to all information contained in this operating manual, especially in the safety instructions.

Any other usage is considered to be improper and may lead to material damages and even personal injuries. Moreover, it will result in the immediate loss of guarantee. The manufacturer does not bear any liability for damages caused due to improper use.

5

ODYS PRIME

2 Mounting – dismantling

2.1

Stand mounting

6

1. Put the stand on the foot of the back

2. Mount the stand on the foot of the back with the 2 screws.

ODYS PRIME

Wall mounting

Use the four thread on the back to connect the tv with your wall retainer.

-VESA 100 standard-

7

ODYS PRIME

3 Front and Rear Panel Illustration

3.1

Front panel and Keyboard

2 3 4 1 5

MENU CH CH VOL VOL+ SOURCE POWER

LED indicator IR Ontvangstraampje (vrij houden)

1: Remote control sensor.

2: Indicator LED:

GREEN = POWER ON

RED = STAND-BY

1 Source

Display the input source menu.

2 MENU

Display main MENU.

3 CH+/CH-

In TV mode press CH+ or CHto change the channel up and down.

In MENU, press CH+ or CH- to select items.

4 VOL+/VOL-

Adjust sound level.

In MENU, adjust the item that you selected.

5 POWER(STANDBY)

8

Rear connection board

ODYS PRIME

1. 12V DC Power In

2. USB Port

3. HMDI Port

4. VGA Port

5. PC Audio In

6. Scart Port

7. Earphone Out

8. Coaxial out

9. Mini YpbPr Video In

10. Mini AV (Video+Audio) in

11. TV antenna input (ATV-DVBT)

9

ODYS PRIME

7

6

10

12

13

15

17

18

19

20

23

24

27

28

31

32

35

3.2

Remote Control

1

3

2

4

5

8

9

11

14

16

25

22

21

26

30

29

34

33

1.

2.

3.

4.

POWER: to switch the set device to on or standby.

SOURCE: Select input source.

NUMBER KEYS: to select channel numbers

LIST: Open the program list

5.

6.

: Switch to the last viewed channel

EPG: To display information about the program being

viewed and what’s on next.

7.

RECORD: Start to record.(Only in DVB-T Mode).

8.

TV/RADIO: It is used to switch between digital TV channels

and radio stations.

9.

10.

FAV: Used to access your favorite channels.

VOL+: Increase the volume level.

11.

12.

13.

14.

CH+: Used to changing the channels upwards

MUTE: to disable or enable the sound output.

VOL-: Decrease the volume level.

CH-: Used to changing the channels downwards.

15.

16.

17.

18.

19.

20.

EXIT: Used to return to the previous screen or menu.

MENU: Open the system setup

OK: Used to confirm a selection within a menu.

ARROW KEYS: Move within the menus.

SLEEP: Set timer to turn off the TV.

PICTURE: To switch picture mode.

21.

22.

SOUND: to switch sound mode.

DISPLAY: Used to display information about the channel

being viewed or further information about the program.

23.

ASPECT: to switch the aspect ration

24.

PLAY/PAUSE: Press to start playing MEDIA, or to pause

playing.

25.

26.

STOP: Stop playing Media.

Rec.list: Display the record list

27.

TXT/Repeat: to open/close teletext OSD display if teletext

available in the broadcasted stream. / To change the repeat

mode in media playback mode

28.

29.

HOLD: HOLD teletext page

SUBTITLE: Used to switch among different subtitles

30.

AUDIO/NICAM/A2: to switch the soundtrack /Change

NICAM Mode

31.

32.

33.

34.

35.

/ SUBPAGE: Fast rewind / teletext subpage

: Fast forward

/SIZE: go to the last file/ Change teletext page size

/REVEAL: go to the next file / Reveal teletext page

Teletext functions in TV mode.

10

ODYS PRIME

Installing Batteries

Installing Batteries

1. Open the battery compartment cover on the back of the remote control.

2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones.

3. Close the cover.

Notes on batteries

If the remote control is not used for a long period of time, please remove the battery from the compartment.

Do not heat batteries or dispose of them in fires.

Do not dismantle, deform or modify batteries.

- The remote control should be operated within 30 feet(7m) and 300 to the left and right of the

IR receive at the front of the TV.

- Used batteries should be disposed properly.

11

ODYS PRIME

4 System Connections

Do not connect the power cord until all other connections have been made.

Note:

Select the correct input source with the SOURCE button. The unit does not switch automatically into the appropriate mode.

12

ODYS PRIME

4.1

Connecting a USB Devices for playing media files

The

ODYS-PRIME has an USB Port to upgrade the software and playing media files.

If possible, please connect USB devices directly to the Devices USB interface.

If this is not possible, use only USB extension cables not exceeding 25 cm.

Press SOURCE then direction buttons to select USB mode, then press the OK button to confirm.

Please make sure that the USB device is plugged in the slot. There are three type media item can be selected, such as photo, music and Movie. Select the type media item by pressing , press OK button to enter the media file selection menu.

13

ODYS PRIME

Select the media file by pressing ŻŹ or Ÿź, then the preview frame will pop up.

Press the button

Ź(play) to play the media file in full screen.

When the media file (photo, music, Movie) is playing, press the OK or Info button can display the control bar.

Press ŻŹ to select the function icon, press OK button to confirm the function. Press źor EXIT button to exit the control bar.

NOTE: You can adjust the audio track, or program in the Info menu while Playing the video file. Choose the Info icon and press OK can display the Info MENU.

14

ODYS PRIME

4.2

Connecting to PC

The unit can be connected to PC (personal computer) via the VGA cable.

Follow the figure below to connect:

1.

Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect the other end to the PC.

2.

Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and connect the other end to the PC audio output jack.

3.

Power on the TV set and switch to PC mode (VGA) using the SOURCE key.

4.

Power on the PC.

5.

Set the PC video resolution to match that of the television.

NOTE: It is very important to follow this steps exactly!

15

ODYS PRIME

4.3

Connecting to TV-Signal Input

Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on the back of the unit so that you can receive television programmes.

After connection, turn on the power of the unit. Then press the SOURCE button to select TV or DTV mode and conduct program selection.

Note

Whether and how many DVB-T channels can be received by this device, is strongly depending on the operational place, and the DVB-T signal strength in this Area.

DVB-T radio in particular is very limited and not available in most locations

Please note that for using of DVB-T after each larger local changes, a new channel search should be accomplished. Since the frequency of the Channels may Vary from region to region.

16

ODYS PRIME

5 Input Source Selection

The unit incorporates multiple video modes which can be selected via the TV/AV / Source button on the television or remote.

Press the SOURCE button to enter Input menu. The screen will display as shown below:

SMART TV

AV

USB

Use the direction buttons and OK button

On the input menu, press the direction button to select the desired video mode, and press the OK button to enter the selected mode.

DTV = Select DTV mode for digital antenna TV.

ATV = Select ATV mode for analogue cable TV.

SCART = Shows the picture of external device which connects to SCART

YPBPR = Shows the picture of external device which connects to YPBPR

PC = Shows the picture of external device which connects to VGA

HDMI = Shows the picture of external device which connects to HDMI

SMART TV = Select SMART TV mode.

AV = Shows the picture of external device which connects to AV

USB = Open the media player for USB playback.

17

ODYS PRIME

6 First commissioning

6.1

Mode selection

The first boot will prompt mode Selection.

Use the Ÿź direction buttons and ok button Select your preferred picture type

Home mode: Suitable for a Dark room. Backlight brightness will be lower

Store mode: Suitable for a normal environment. Backlight brightness is normal

Press

Ż

or

Ź

to answer the “Are you sure?” question.

18

ODYS PRIME

6.2

Installation Guide (DVB-T, ATV)

This screen only appears when the TV first time turns on or reset to factory. You can choose language and country, auto turning programs .And after turning the screen will skip to the first DTV program.

Energh mode

Home Mode

( 1): Select the OSD menu language.

( 2): Select the mode for searching.

( 3): Select the country for DTV and ATV reception.

( 4): Select which type of channels you want to search.

Press ok to confirm.

The channel search starts now with ATV channel search.

- Press “Exit” to exit the channel search. Press -key to exit or -key to proceed searching.

- Press “TV menu” to skip the analogue TV (ATV) channel search.

Press -key to skip or -key to proceed searching.

If you skip ATV search the engine will proceed with DTV channel search.

19

ODYS PRIME

7 TV operation and system setup

OSD Settings (Main Operations)

Press

/

to select the page. Press

/ to select the setting.

7.1

Channel menu

The first item of the MENU is channel menu( for TV or DTV source only).

7.1.1

Auto Scan

Search all the channels automatically (you can select ATV and DTV)

DTV = For digital antenna tv and analoge cable tv.

DTV

1. Select your country.

2. Select the search mode.

ATV = Analogue Programs

DTV = Digital Programs

3. Press OK to start the automatic scan.

Press MENU to skip ATV scan and

Ż to confirm.

Press

Ź to continue the ATV scan.Then the device will search DTV.

NOTE:

All the channels including ATV, DTV and DTV Radio can be tuning by one time, if the Tune Type is DTV+ATV . All the stored channels will be deleted and overwritten after auto tuning . After auto tuning, the channel will skip to the first

DTV channel.

20

ODYS PRIME

7.1.2

Manual channel tuning

DTV manual tuning:

(DTV MODE ONLY)

You can select a DTV channel then find the programs in this channel.

Pls press

ŻŹ to select the channel , then press OK to search the programs .

NOTE ˖Bad - Normal - Good means signal intensity.

ATV manual tuning :

(ATV MODE ONLY)

You can change the sound system to search the analog TV channels and fine tune the channels , then store the channels you selected to a desired Number.

NOTE: Press teletext red button to storage to channels after manual tuning .

21

ODYS PRIME

7.1.3

Program Edit

To edit your program preferences (rename, skip, favourite, move or delete), you will need to enter the

Program Edit Menu.

RED Button

Delete

YELLOW Button

Move

BLUE Button Skip

FAV Button

Favourite

Rename

Press teletext red button , the program in cursor will be deleted, press red key to confirm.

Move the cursor to the program,press yellow button ,then you can use

Ÿź to move the program. Press OK to confirm.

Press

Ÿź to choose the program , press teletext blue button to skip this program, The will show on the right side of the program .

Choose the skipped program, press blue button again , you can cancel the skip ,

The will disappear .

Press Ÿźto choose the program , press FAV button , it will show on the right side of the program.Choose the FAV program , press FAV button again , you can cancel the FAV , the will disappear .

7.1.4

Signal Information

Highlight SIGNAL INFORMATION and press OK to display the signal information(DTV mode only).

7.1.5

Software Update

Let you install a new software version on the device. This of course must be connected to a USB memory stick with the update file in the root directory.

22

ODYS PRIME

7.1.6

PVR Record Functions

NOTE:

Recording is only available in DTT (DVB-T) Mode.

Note : Plese note the following: It´s only possible to use USB 2.0 flash drivers with a maximum capacity of

64 GB for recording. External hard drives are not supported.

Record Start

Starts recording of the current channel. You could use the PVR button on the remote control also.

Recorded List

To open a list of made records.

Recorded Mode

You can setup a record timer here.

Press / to select a setting and / to change value.

Press OK to add your settings to schedule list.

Schedule List

To open the schedule list. The schedule list includes a list of preset recordings. Record schedules can be added using the EPG or manually set in recording mode menu.

Use the RED button to remove existing schedules from the list.

23

ODYS PRIME

7.2

Picture menu

The second item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc.

Press

Ÿź to select the setting, press OK to adjust, press ŻŹ to change the setting.

Press TV MENU to step back to the previous menu.

Picture Mode:

Contrast:

Brightness:

Colour:

Sharpness:

Colour Temperature:

Red:

Switch between the preinstalled picture modes.

Increase or decrease the contrast level.

Increase or decrease the brightness level.

Increase or decrease the color level.

Increase or decrease the sharpness.

Switch between the preinstalled color temperature modes.

Increase or decrease the red color ratio.

Green:

Blue:

Increase or decrease the green color ratio.

Increase or decrease the blue color ratio.

Aspect Ration: Switch between 4:3, 16:9, Zoom1, Zoom2, Just Scan and

Panorama.aspect.

Noise Reduction: Choose interference noise modes form Off, Low, Middle, High and

Default.

Screen: Screen is available in PC mode only which, can adjust Horizontal position, vertical position, size and phase.

NOTE:

Tint is available in NTSC system only.

24

ODYS PRIME

7.3

Sound menu

The third item of the MENU is the SOUND MENU.

You can adjust the sound effect here such as treble, bass, balance etc.

Press

Ÿź to select the setting, press OK to adjust, press ŻŹ to change the setting.

Press MENU to step back to the previous menu.

Sound Mode:

Treble:

Bass:

Balance:

Auto Volume:

Surround Sound:

SPDIF MODE:

Switch between the preinstalled sound modes.

Increase or decrease the treble level.

Increase or decrease the bass level.

Set the balance level between left and right speaker.

To compensate volume differences between channels .

Switch on / off the surround sound mode.

Allows you to select among: Off, PCM and Auto.

This function will allow connection to a 5.1 digital surround sound amplifier via the

COAX output socket. OFF will turn off the digital sound output

PCM will select pulse code modulation digital sound and AUTO will select other sound formats if the decoder recognises them. Set this option to AUTO for default settings.

25

ODYS PRIME

7.4

Time menu

The forth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc.

Press

Ÿź to select the setting, press OK to adjust, press Ÿź to select the value to change, press ŻŹ to change the setting.

Press MENU to step back to the previous menu.

Clock:

Off Time:

Set the system time

Time adjustment for automatic shutdown

On Time:

Sleep Timer:

Time adjustment for automatic power on.

Duration adjustment of the automatic shutdown

Auto Sleep: Set the auto sleep time

No Action Auto Standby: According to the latest ERP regulation, this unit will switch off itself automatically if no change in status within the last 4 hours of operation.

Time Zone: Set your time zone

26

ODYS PRIME

7.5

Option menu

The fifth item of the MENU is the OPTION MENU. You can adjust the Menu language, Audio language,Subtitle language etc.

Press Ÿź to select the setting, press OK to adjust, press Ÿź to select the value to change, press ŻŹ to change the setting.

Press MENU to step back to the previous menu.

OSD Language:

Audio Languages 1st:

Audi Languages 2nd:

Subtitle Languages 1st:

Select the ODS Language.

Select the first audio language.

Select the second audio language.

Select the first subtitle language.

Subtitle Languages 2nd:

OSD Duration:

Select the second subtitle language.

Set the banner time of osd.

Country: Select your country.

Home Mode: Set the main panel value

Energy Mode: Select the energy mode from Home Mode and Store Mode.

Restore Factory Default: Reset the system to factory default.

27

ODYS PRIME

7.6

Lock menu

The sixth item of the menu you can set password, block program and set parental guidance.

Press

Ÿź to select the setting, press OK to adjust, press Ÿź to select the value to change, press ŻŹ to change the setting.

Press MENU to step back to the previous menu.

Hotel Mode

Lock Channel:

Set Password:

Block Program:

Parental Guidance:

If the channel is locked you can only watch this after entering the correct password.

To change the current password.

Block program: Press

Ÿź to choose the program ,press teletext green button to block the program. If you want unblock the program, pls enter the main menu , input the password, then press green button again

Press

ŻŹ to select the level. If the current station and program support this function you can set the age from which on a person can watch on.

NOTE:

The default pass word is 0000. The admin pass word is 8899.

Parental Guidance is not available in ATV Mode.

28

8 Other functions

ODYS PRIME

8.1

Hotel Mode

8.2

Program list

Press the LIST button to enter the channel list while watching a program.

Press

ŻŹ to switch between all channels (All), only tv channels (DTV), only radio channels

(Radio) and data channels (data).

Press the

Ÿź button to move the highlighting, and press OK button to watch the highlighting channel.

29

ODYS PRIME

8.3

Favorite liste

If you have set a favorite lists, press the FAV button to enter the list.

Press the Ÿź button to select the channel in the favorite list.

Confirm the choice with OK to show the selected channel.

8.4

Teletext

Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.)

Press:

TTX

SELECTING A

DIRECT ACCESS

TO THE ITEMS

INDEX

S. PAGE

HOLD

You will obtain:

This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding3 digit page number. If the channel selected does not broadcast teletext, theindication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel).

Enter the number of the page required using the 0 to 9 up/down.

Example: page 120, enter 120. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically displayed successively. This key is used to stop or resume sub- page acquisition. The indication appears top left.

To freeze the page.

30

REVEAL

LIST

ODYS PRIME

To display or hide the concealed information (games solutions).

The user can set four favorite pages to be directly linked to the four color keys. While list mode is activated, it is not possibility to use TOP or FLOF navigation with the colorkeys. The favorite page numbers should be stored and restored to/from nonvolatile memory for each channel by the system software.

8.5

EPG Menu (Electronic Program Guide).

The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the EPG button, the following menu will be displayed:

The EPG is an on-screen TV guide that shows scheduled programs seven days in advance for every tuned channel. Press the EPG button on the Remote Control to access guide. It will show a list with the current run programms.

Press INDEX and use

/ to switch between Time / Channel .

Time: An overview will be shown about the broadcast to the selectet date to current time from the programms.

Channel:

Remind:

Record:

Schedule:

- Select the “Date / Timer” display and press to edit the date.

An overview will be shown about the broadcast course of the selectet channel on day you edit befor.

- Select the programm display and press to switch the channel

Use GREEN botton to open the reminder setting. Press “Ok” to acknowledge the edit settings.The made settings will be stored in your schedule list.

Use PVR botton to open the record setting. Pres “Ok” to acknowledge the edit settings.

The made settings will be stored in your schedule list.

Use YELLOW botton to open the schedule list from your records and remind settings. Selectet items can be delete with “RED” botton.

31

ODYS PRIME

8.6

Program Information

You can press the DISPLAY button to display the general information of the current channel. And the info bar will disappear automatically after few seconds or you can press the EXIT button to exit the info bar.

Press

Ÿ ź to scroll through the text below the information bar.

Press ŻŹ to switch between the current and the next program.

8.7

NICAM/A2

You can select the language you prefer in Audio if the current program is available in multiple audio languages.

1. Press the NICAM/A2 button.

2. Press the OK button to select the audio language you prefer.

3. Press the EXIT button to close.

8.8

Subtitle

You can select the language for the subtitle if the program provides subtitle information.

1. Press the SUBTITLE button.

2. Select the required subtitle language and press the OK button. The subtitle of the selected language will be displayed at the bottom of the screen.

32

ODYS PRIME

9 Troubleshooting

If you have problems with this device or his installation, please look again exactly the appropriate section in this manual, and read details in the following tables.

Trouble phenomenon Symptom

Picture Audio

Inspection Check

Snow Noise antenna position, direction or connection

Ghost

Interferen ce

Normal audio antenna position, direction or connection

Noise electronic equipment,car/ motorcycle,fluorescent light

Normal

Picture

No picture

No colour

Mute

Volume(check if mute is activated or if the audio system connections are not correct)

Mute

Power cord is not inserted

Power switch is not opened

Contrast and brightness/volume

Normal audio

Colour control

33

ODYS PRIME

10 Input Source Selection

The unit incorporates multiple video modes which can be selected via the TV/AV / Source button on the television or remote.

Press the SOURCE button to enter Input menu. The screen will display as shown below:

Input Source

DT V

AT V

SCART

YPBPR

PC

HDMI

Smart T V

AV

USB

and press the OK button to enter the selected mode.

DTV = Select DTV mode for digital antenna TV (DTT Services).

ATV = Select ATV mode for analogue cable TV.

SCART = Shows the picture of external device which connects to SCART

YPBPR = Shows the picture of external device which connects to YPBPR

PC = Shows the picture of external device which connects to VGA

HDMI = Shows the picture of external device which connects to HDMI

Smart TV = Enter Smart TV Functions on a android system like Internet, E-Mail, etc.

AV = Shows the picture of external device which connects to AV

USB = Open the media player for USB playback.

34

ODYS PRIME

11 First installation guide

11.1

Mode selection

The first boot will prompt mode Selection.

Store mode:

11.2

Installation Guide (DVB-T, ATV)

. Y

35

36

ODYS PRIME

(1): Select the OSD menu language.

(2): Select the mode for searching.

(3): Select the country for DTV and ATV reception.

(4): Select which type of channels you want to search.

Press ok to confirm.

The channel search starts now with ATV channel search.

- Press “Exit” to exit the channel search

searching.

- Press “TV menu” to skip the analogue TV (ATV) channel search.

eed searching.

If you skip ATV search the engine will proceed with DTV channel search.

11.3

Installation Guide (SMART TV)

This screen only appears when the TV first time turns on or reset to factory. You can choose language and country, auto turning programs. Press Ok to continue.

NOTE:

We recommend to use a cabeled ethernet network connection. Please attach the network cable before you switch on the engine.

If you are using a WIFI connection please take care that you select the correct network and enter the correct wifi password. Plase enter the password correctely as it is and take care of capital letters and special character.

Welcome

Installation wizard!

Please follow some simple steps to set up your SmartTV

Start configuration

Use the arrow keys in combination with the OK key to change the settings.

Select “DONE” and press OK to confirm each setting.

(1): Select the OSD menu language. Press

(2): Select the network connection.

(3): Enter the correct time zone. For central Europe please enter “+1”.

(4): Enter the correct date.

(5): Enter the correct time.

ODYS PRIME

12 Android Smart TV Operation

Please follow the first installation wizard instructions first.

1 Press the SOURCE key.

2 Select SMART TV from the SOURCE list and press OK to confirm.

Note: Depending on the previous state it may take a while to start up the android system. Meanwhile you will see the “No Signal” hint.

12.1

First Installation wizzard

At the first time you are using the Smart TV part of this device a first installation wizzard will be shown and will guide you the the most important settings.

1 Press OK to start the configuration

2 Use the / keys to select the desired language.

Press OK to confirm.

3 Select the network connection.

Press OK to confirm.

If you are using a wireless network you need to select the correct access point now and enter the correct password.

Please refer to the chapter about the system settings.

37

38

ODYS PRIME

4 Now select the time zone where you are living in. Press OK to confirm.

5 Change the Date if it is not correct. Press OK if done.

6 Now control the time settings and press OK

7 Have a look at the state if anything is correct and press

OK to finish.

12.2

Main Interface

ODYS PRIME

Network status

Time

Main Menu

Weather

Calendar

Main interface configuration

Press the

-key to open

Setup for the weather widget

To change the background wallpaper

Open the task

To change the manager behaviour of notifications

12.3 Main Menu

From the main menu it is possible to select the main functions as following:

App Manager – Browser – Media-Player – Notifications – Settings

Use the / keys to change the Main menu items.

Press OK to open the selected option.

Note: It is easier to access the different parts if the Mouse function is disabled (Red key).

Please use the arrow keys to select the accessible parts of the screen or in sub menu.

12.4 Main interface configuration

While facing the main interface press the menu key to display the main interface configuration.

Note: Take care that you are in keyboard mode to use it more easy.

Use the / keys to select the desired setting.

Press OK to open the selected option.

Weather config - Setup for the weather widget

Wallpaper Setting - To change the background wallpaper

Notification Config - To change the behaviour of notifications

Task Manager - Open the task manager

39

1

17

18

21

22

23

24

27

28

11

13

4

5

8

15

ODYS PRIME

12.5

Remote Control – Android Functions

2

3

7

6

9

10

12

14

16

20

19

26

25

29

1. POWER: to switch the set device to on or standby.

2. SOURCE: Select input source.

3. NUMBER KEYS: Enter numbers and characters

where writing is available.

4.

5.

HOME: Press to return to the home screen.

MENU: Press to view the option menu

Note: When you press the Menu key from within an application,

you will see the options for that application. To view the Android

system options, tap the Menu key from the home screen.

6.

Google Search / Internet address bar

7. BACKSPACE:

To delete just written text.

8. VOL+: Increase the Volume

9. Page up

10. MUTE: To disable or enable the sound output.

11. VOL-: Decrease the Volume

12. Page down

13. EXIT: Press to return to the previous screen.

If the keyboard is on the screen, press to close the

keyboard.

14. MENU: Open the main/TV system settings

15. OK: Used to confirm a selection.

16. ARROW KEYS / / / : Move within the menus and

select selectable elements one by one. In Browser mode

press several times to select search results.

17. SLEEP: Set timer to turn off the TV.

18. PIC: To switch picture mode.

19. SOUND: to switch sound mode.

20. DISPLAY: Showing mode information

21. ASPECT: to switch the aspect ration

22. PLAY/PAUSE: Press to start playing MEDIA, or to

pause playing.

23.

: Fast rewind

24.

: Fast forward

25.

26.

: go to the last file

: go to the next file

27.

: Toggle between keyboard and mouse function

Note: Because of IR limitations the mouse function by using the provided remote control is slow. We recommend using a separate mouse or keyboard (not provided).

28. ABC/123: Change the input mode for the number keys.

Enable the function to enter character directly by pressing

one key several times.

29. NOTIFICATION: Open/ close the notification bar.

40

ODYS PRIME

12.6

Using the Remote Control

To control your Android system you can use the provided remote control.

Note: Because of the large variety of functions we recommed to use an addtitional Mouse and/or keyboard (not provided).

By pressing the red key ( ) you can switch between mouse and keyboard mode.

Mouse Mode o o o

In mouse mode you can see a cursor at the screen.

Use the arrow keys to control the position of this cursor.

Press OK to confirm.

Note: Because of IR limitations the mouse function by using the provided remote control is slow.

Please note, that this is a specification of this engine.

o o o o

Keyboad Mode

Keyboard mode you can select any access accessible part one by one.

Use the arrow keys to move the selection left / right or up / down.

The selection will change in the pressed direction. Please Note that that selection will take place in only one line or column.

o Press / to change the column or horizontal selection

Press / to change the line or vertical selection.

Press OK to confirm.

Note: Depending on the function, application or web page you are currently using it might be difficult to identify the currently selected part. Please watch the screen carefully. If you are not sure please switch to mouse mode.

12.7

Using Mouse/Keyboard

This device is designed to use a wired and wireless mouse and keyboard

Using a Mouse

Key: Press to view the option menu

Wheel: Move to scroll up/down

OK/Select

Return/Back

Using a Keyboard

Use the keyboard as known from your computer.

Please refer to the below list for the key set for special android functions of a standard keyboard.

41

ODYS PRIME

ESC

F1

F2

F3

F4

ENTER

/ / /

Return key

Menu key

Open / close the status bar

Google Online Search

Home key

OK

Moving the cursor as in keyboard mode

Note: Please note that Bluetooth devices are not supported!

Please only use Infrared or 2.4GHz radio transmitting devices.

12.8 Installing Memory Card

This device can read files directly from memory card.

To use a memory card, find the card slot at the bottom of the device and then insert the memory card into the slot in the correct orientation. To access the files stored in the memory card, enter the Explorer mode by tapping the Explorer icon and select the “SD Card” directory.

Check that the SD card is in the correct position with the contact pin facing towards the

front side as illustrated. You may damage the card and the reader if SD card is not

inserted in correct position.

Push the SD card into the card slot until it clicks.

To remove SD card, push the SD card once again until it clicks.

Note: We recommend using only SD or SDHC cards up to 16GB capacity.

When a SD card is inserted in or ejected from the device, it may take few seconds for the

device to update the content.

Please avoid inserting or ejecting SD card when other operation is running as this may

cause the system hang.

Do Not remove the card if the content inside the card is being played. This will halt the

operation of the device and might cause a system hang.

12.9

App Manager - Display all Applications

The device supports most of popular third-party applications. It has many useful applications pre-installed, such as media player, app center, file manager etc.

Furthermore, you can add more applications to the device by installing them manually.

Use the installed App Center for search and install new Apps.

To display all applications in¬stalled on your device, select the AppManager from main

Interface and press OK.

Caution:

Most of the Android Apps are only designed to be used by Mobile Phones with touch screens. Be careful by selecting additional apps you whish to install! Possibly you can not use these apps with this TV set.

Please note that Axdia Int. takes no responsibility or warranty for the functionality of

3rd party applications.

42

ODYS PRIME

12.10 Launching the Web browser

Select the Browser from the main interface to launch the Web browser.

If you are already connected to a network, the Web browser will simply open and you can start browsing the Web. To access a new website, Press the Search icon to open the address bar and input another address.

Now Press / to switch to the virtual keyboard.

Note: Not all wireless networks offer access to the Internet. Some Wi-Fi net¬works only link several computers together, without any Internet connection.

Using the Virtual Keyboard

Select any text input field and press ok to open the virtual board. With the virtual keyboard, you can enter a website address or any text required.

Use the arrow keys to select the desired character

Press OK to confirm.

Press the Return key to close the virtual keyboard.

Indications a.

b.

Caps Lock

Backspace.

c.

Number and Characters /

Letter Keyboard Switch.

d.

e.

Space

Enter

Selecting Input Method

If you have installed more than one input method in this device, you can select one method by choosing “Input Method” and then choosing your desired one.

Note: The keyboard layout will change depending on the osd language settings.

Using the Web Browser

Use the

-key to switch back from the virtual keyboard to the search bar or to select one of the displayed search results.

Press the red key ( ) to change the input method.

Note: Using the provided remote control the mouse mode is slow. It is recommended to use the keyboard mode and use the Arrow keys for navigation only.

43

ODYS PRIME

Using the green (ABC/123) you can change the input method of the number keys to use them for entering the words.

You can scroll the screen up and down by pressing CH+/CH- on the page and dragging it up or down (be careful not to tap a link until you are ready!).

To open a link, simply select it and press OK.

To go back to the previous page that you browsed, tap the Back icon

To display the available menu items, tap the Menu icon .

To go back directly to the Home screen, tap the Home icon .

.

To fill in a text field, select the field, then use the virtual keyboard to type in the required text.

Web Browser Menu Items

When you are viewing a page, press the menu key to display the menu items.

New window

Allows you to open new windows.

Bookmarks

Will open the “Bookmarks” manager. You will see three tabs:

Bookmarks,” “Most visited,” and “History.”

Bookmarks” shows you a list of bookmarks. Just tap one of them to open it in the current window. You can use the Menu icon which will allow you to bookmark the last-viewed page.

Most visited” and “History” allow you to access your “Most visited” sites and your visit history. In the “History” tab, the Menu icon

Windows

Refresh/

Stop

Forward

More

allows you to clear the history.

When you have several windows currently opened, select “Windows” and press OK to display them all at once on the screen. Just select one of the small windows and press OK to view it in full screen, or select the Close icon and press OK in the small window to close the window.

“Stop” will stop loading the web page, if it is currently loading.

“Refresh” will refresh the current web page, if it has stopped loading.

Will go to the next page that you browsed.

Will give you access to other options (“Find on page,” “Select text,”

“Page info,” “Downloads,” “Settings” etc.).

44

ODYS PRIME

12.11 Using the Media-Player

In the Home Screen, select the Media-Player icon to enter the media player mode.

Note: To use this function you must set in a SD card or attach a USB drive containing playable formats that this engine can support, first.

Use the / keys to select the desired file format (Video, Photo, Audio).

- Now use / to select the attached memory where the files you whish to show or play are stored in.

- Select a Folder by using the / keys and pres OK to open this folder.

- Press Exit to leave the folder to the next higher level.

- Select a file and press OK to play or show it.

12.11.1

/

Video playback functions

Press to open the function bar.

Select the desired function and press OK to confirm.

Play / Pause

/

/

Exit

Return to the file browser

Previous / Next Video file

Select and press OK to change the Fast rewind / Fast forward speed

Select and Press OK to return to standard playback speed.

Open additional functions

Display file information’s

Change aspect rate (Full screen, 4:3, 16:9, No Scale UP)

Enable subtitles (if subtitle file is available)

Select the sound track (if different tracks are available)

Turn resume mode on/off

(the system will remember the last viewed file position)

Select the repeat mode

(repeat all – repeat one – no repeat)

Close the additional functions menu

Return to previous state or exit function

45

46

ODYS PRIME

12.11.2

Exit

Photo playback functions

Press Menu key to open the function bar.

Select the desired function and press OK to confirm.

Zoom in the current picture.

Rotate the current picture left or right.

Start /stop picture slideshow.

Return to previous state or exit function

12.11.3

OK

/

Music playback functions

Select the desired function and press OK to confirm.

Previous / Next track

Indicate and Change the repeat mode. Select one of the right icons and press OK to change the repeat mode.

Play all files one time in original order

Exit

Repeat all files

Repeat one file

Play all files in random order

Return to the file browser

Return to previous state or exit function

12.12 Notifications

Using this main interface option you can open the android notification bar to show the latest events.

Use the arrow keys to select an event to open it or select delete and press OK to clear the list.

Press EXIT to close the list without any change.

12.13 System Settings

In the Home screen, select “Settings” and press OK. Choose a category: “Wireless

& Networks,” “Sound & Display,” “Date & Time,” etc.

ODYS PRIME

When a down arrow appears on the right of a parameter, this means that this setting includes sub-parameters. Select it ant press OK to display the list of sub-parameters.

When a check box appears on the right of a parameter, select it and press OK to enable or disable this option.

When it is possible, you can use the CH+/CH- keys to scroll the screen up and down to reveal settings that you don’t initially see.

When you have finished adjusting your settings, press Exit to go back to the list of settings, or Home to go directly to the Home screen. Your settings are saved instantly.

12.13.1

Wifi Settings - Configuring WIFI Connection

Your Device features built-in Wi-Fi technology so that you can access the internet via

Wi-Fi network.

First of all, you need to configure a Wi-Fi network. For the Wi-Fi configuration procedure to work, you need to be in a Wi-Fi zone that will allow you to connect to it. Every time Your

Tablet is in range of a network that you have already configured once, it will attempt to make a connection.

Note: In order to establish a Wi-Fi connection it is required to know the encryption password of the desired Wi-Fi network.

Be sure that you are allowed to use this network and that no other settings of this network like

MAC address filter will deny the connection.

The MAC Address of your device can be found at: “Settings” – “About device” – “ Status”.

(1) In the Home screen, select Settings from main Interface and press OK.

(2) Select “Wi-Fi” setting and press

OK to turn on the Wi-Fi.

47

ODYS PRIME

(3) After enabling WiFi the TV will scan automatically for available WiFi networks and display them. The list of available networks shows all the wireless networks in range of your device.

Note:

a) The available network list is constantly refreshed automatically.

b) When the Wi-Fi is enabled, Your Tablet will connect automatically to your configured networks when they are in range.

c) If Your Tablet finds a network that has never been configured, it will display a notification icon.

(4)Select the network you want to connect to and press OK. Enter the required network information (password) and then select “Connect” and press OK. Your

Tablet will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered. If the connection is successful, the message

Connected to XXX will appear under the WIFI setting.

Advanced Connection

To manually scan for available Wi-Fi networks,

(1) In the “Wi-Fi settings” screen, tap the Menu icon , and then tap “Scan.”

(2) If the Wi-Fi network you want to connect to does not appear in the list, scroll down the screen, then tap “Add a Wi-Fi network.” Enter the required settings, then tap

“Save.”

To access the advanced network parameters (“Regulatory domain,” “IP address,” etc) tap the Menu icon , and then tap “Advanced.” Other parameters will appear. The required information can be obtained from the person who manages the network.

48

ODYS PRIME

12.13.2

Ethernet

Disable / Enable the wired Ethernet network connection.

Select the additional Ethernet setting to use customized settings

12.13.3

Applications

This screen allows you to manage your Android™ applications. You can view informa¬tion about all the applications installed on your device.

12.13.4

Factory data reset

This setting allows you reset your system settings or data to factory default.

Caution! All old settings will be replaced and all stored data will be lost!

12.13.5

torage

This setting allows you un-mount the SD card or check SD card and internal storage space.

12.13.6

Language keyboard

Set your preferred language and region, and configure text settings for faster and more accurate text input.

12.13.7

System upgrade

If available copy system upgrade files to SD card and follow the attached instructions to upgrade the android system.

12.13.8

Date& time

This setting allows you set up the date, time, time zone and formats.

12.13.9

About device

Display information about Your Tablet system.

49

P r o b l e m

N o p i c t u r e

Screen shows

No Signal

No sound from

Speaker

Only sound, no image on the screen

Remote control unit is not workable

The image stop suddenly or mosaic

ODYS PRIME

P o t e n t i a l R e a s o n s

P o w e r i s n ' t c o n n e c t e d

W h a t t o d o

C o n n e c t t h e p o w e r

Incorrect setting Set up correct parameter

No or incorrect connection with audio cable

Mute the sound

Incorrect sound track

No or incorrect connection with AV cable

Connect the audio cable correctly

Switch on the correct volume control

Try another sound track

Connect the audio cable correctly

The battery is exhausted

Remote control unit is not in the right opposite of the front panel or too far from it

The signal is too weak

Change new battery

Adjust the way of holding remote control unit and near from the panel

Strengthen the signal

50

ODYS PRIME

13 Specifications

I t e m

ATV/DTV Tune

DVB-T Demodulation

Connections

S p e c i f i c a t i o n

Frequency Range

D e m o d u l a t o r

OFDM Modulation

P a c k e t C a r r i e s

G u a r d I n t e r v a l

HMDI

USB

VGA

TV SCART

Earphones

Power

D i

D s p l e c o a y d i n g

I n p u t

C o n s u m p t i o n

D e c o d e r M o d u l e

A s p e c t R a t e

V i d e o

A u d i o

S o u n d M o d e

* Specifications are subject to change without further notice.

VHF: 174MHz to 230 MHz

UHF: 470MHz to 862 MHz

C O F D M

2K, 8K FFT, SFN and MFN

2 K / 8 K

1 / 4 , 1 / 8 , 1 / 1 6 , 1 / 3 2

D C 1 2 V 3 .

3 3 A

4 0 W .

P A L , N T S C

4 : 3 ( L e t t e r b o x , P a n & S c a n ) , 1 6 : 9

M P E G 2 T r a n s p o r t M P @ M L

M P E G 2 A u d i o L a y e r

R i g h t , L e f t , S t e r e o

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

51

ODYS PRIME

14 Glossary

EPG

FTA

Mute

OSD

PID

Receiver

SCART

HDMI

Y/PB/PR

RGB

Electronic Programme Guide

Free to air services Free of charge services that can be received without a special decoder.

Key of the remote control for turning off sound

On screen display Menu control displayed on the screen.

Identification number of a received data stream. The PIDs ensure that a channel is received completely.

Receiver unit, which converts signals from the antenna into video and audio signals.

A21 pole connector for connecting the TV set to the receiver.

High Definition Multimedia Interface. A connector for connecting the TV set to the receiver and transmit picture and sound in HD quality.

A connector for connecting the TV set to the receiver and transmit picture in high quality

Separated colour information transmission (Red-Green-Blue)

Manufacturer

Axdia International GmbH

Formerweg 9

D-47877 Willich (Germany)

Tel:

Fax:

Web:

+49(0) 2154 / 8826-0

+49(0) 2154 / 8826-100 www.odys.de

Support hotline: +49 (0) 2154 / 8826-101

E-Mail: [email protected]

52

ODYS PRIME

15 Warranty condition

The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations.

We offer a warranty on our products in accordance with the following conditions:

1. AXDIA products are covered by a 24 month warranty. We will resolve damages or defects on

AXDIA products free of charge within 12 months of the purchase date under the following warranty conditions. For any damage or defect determined later than 12 months after the purchase date, proof of a manufacturing fault must be submitted for repair under warranty.

The warranty does not cover batteries and other parts, which are considered consumables, parts that break easily such as glass or plastic or defects based on normal wear and tear. There is no warranty obligation in the event of marginal differences compared to the target appearance and workmanship provided these have a negligible effect on the product's fitness for use, in the event of damage caused by chemical or electrochemical effects, by water or generally from abnormal conditions.

2. The warranty will be performed in such a way that we shall decide whether to repair the defective parts or to replace them with working parts free of charge. AXDIA reserves the right to exchange the product for a replacement product of equal value if the product that is sent in cannot be repaired within a reasonable time or at reasonable cost. The product can also be exchanged for a different model of the same value. Requests cannot be made for repairs to be carried out on site.

Parts that have been replaced or exchanged become our property.

3. The warranty claim does not apply if repairs or other work is carried out by unauthorized persons or if our products are equipped with additional parts or accessories that are not approved for our products.

4. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product.

5. Any other or further claims are excluded, especially those for replacement due to damage caused outside of the product, provided there is no obligatory legal liability. We therefore accept no liability for accidental, indirect or other consequential damage of any kind, which leads to usage restrictions, data loss, loss of earnings or interruption to business.

Asserting a warranty claim

1. To make use of the warranty service, you must contact the AXDIA Service Center by e-mail, fax or phone (see below for contact details). You can also use the service form on our website or on the back of the warranty conditions.

2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA.

53

ODYS PRIME

IMPORTANT: AXDIA will onl y accept parcels that have an RMA number.

Please observe the following when sending the product:

1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA

Service Centre specifies otherwise.

2. Mark the RMA number on the outside of the package in such a way that it is visible and clearly legible.

3. You must enclose a copy of the sales slip as proof of purchase.

4. Once AXDIA has received the product, it will meet its warranty obligations in accordance with the warranty conditions and will return the product to the sender with carriage and insurance paid.

Service outside of warranty

AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs.

AXDIA will not accept any packages that have not first been approved by AXDIA by means of an RMA (Return Material Authorization).

54

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement