BSP for Windows Embedded Compact* 7 and 2013 for Intel® Atom

BSP for Windows Embedded Compact* 7 and 2013 for Intel® Atom
BSP for Windows Embedded Compact* 7
and 2013 for Intel® Atom™ Processor
E3800 Product Family/Intel® Celeron®
Processor N2807/N2930/J1900 Release
User Guide
September 2016
Software Release Version: Maintenance Release 5
Document Number: 332154-005US
Legal Disclaimer
Legal Disclaimer
You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products
described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter
disclosed herein
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.
All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product specifications
and roadmaps.
The products described may contain design defects or errors known as errata which may cause the product to deviate from published
specifications. Current characterized errata are available on request.
Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by visiting:
http://www.intel.com/design/literature.htm.
Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software or service activation. Learn
more at http://www.intel.com/ or from the OEM or retailer.
No computer system can be absolutely secure.
Intel, Intel Atom, Celeron, and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2016, Intel Corporation. All rights reserved.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
2
Document Number: 332154-005US
Contents
Contents
1.0
Introduction ............................................................................................................................................ 5
1.1
1.2
2.0
System Requirements ................................................................................................................................ 5
Acronyms and Terminology.................................................................................................................... 5
Build and Install Instructions ...................................................................................................... 6
2.1
Building WEC*7/WEC*2013 Image .................................................................................................. 6
2.1.1
2.1.2
2.1.3
Installing the .MSI package on Platform Builder ....................................... 6
Creating a Project ................................................................................ 7
Catalog Item Selection ......................................................................... 7
2.1.3.1
2.1.3.2
2.1.4
2.1.5
2.1.6
2.1.7
2.1.8
2.2
Windows Embedded Compact* 7 ............................................................. 7
Windows Embedded Compact 2013 .................................................... 10
Build Option Configuration ..................................................................
Enabling the Intel® Ethernet Driver in WEC7 and WEC2013......................
Enabling SD/SDIO Driver in WEC7 and WEC2013 ...................................
Enable legacy Programmable Interrupt Controller (PIC) ...........................
Build the WEC7 and WEC2013 Image in Release Mode ............................
12
12
13
14
14
Booting WEC*7 and WEC*2013 on Intel® AtomTM E3800 Product Family and
Intel® Celeron® Series Platforms..................................................................................................... 16
2.2.1
2.2.2
2.2.3
2.2.4
Setting up the BIOS ...........................................................................
Boot the WEC7 and WEC2013 Image ....................................................
Loading the Image on BIOS through the KITL Connection ........................
Loading nk.bin via eboot.bin over KITL Connection ..............................
16
16
20
21
Tables
Table
Table
Table
Table
1.
2.
3.
4.
Acronyms and Terminology.................................................................................................................... 5
Catalog Item Selection for Windows Embedded Compact* 7 ........................................ 7
Catalog Item Selection for Windows Embedded Compact 2013 ............................... 10
Build Option Configuration ................................................................................................................... 12
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
3
Revision History
Revision History
Date
Revision
Description
September 2016
005
Maintenance Release 5
November 2015
004
Maintenance Release 4
August 2015
003
Maintenance Release 3.1
July 2015
002
Initial Release (Maintenance Release 3)
March 2015
001
Initial Release (Maintenance Release 2)
§
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
4
Document Number: 332154-005US
Introduction
1.0
Introduction
This document provides important information for enabling I/O for the Intel® Board
Support Package (BSP) for Windows Embedded Compact* 7 (WEC*7) and Windows
Embedded Compact* 2013 (WEC*2013).
1.1
System Requirements
The following are required to build Intel® WEC*7 and 2013 I/O BSP for the Bay Trail
Board.
 For WEC7: Install Microsoft* Windows Embedded Compact* 7 Platform Builder with
August 2015 QFE Update (7.2.2859). This creates a WINCE700 base directory on the
default hard drive (for example, the following path should exist on C: drive:
“C:\WINCE700”). If a WINCE700 base directory does not exist, the installation will
fail.
 For WEC2013: Install Microsoft* Windows Embedded Compact* 2013 Platform
Builder with August 2015 QFE Update (8.1.6223). This creates a WINCE800 base
directory on the default hard drive (for example, the following path should exist on C:
drive: “C:\WINCE800”). If a WINCE800 base directory does not exist, the installation
will fail.
 Intel® Atom processor E3800 (D0 stepping)
 Intel® BIOS
 Intel® WEC I/O Board Support Package (BSP) version: Intel® Processor WEC I/O
BSP.msi
1.2
Table 1.
Acronyms and Terminology
Acronyms and Terminology
Term
Description
BSOD
Blue Screen of Death (Stop Error)
GPIO
General Purpose Input/Output
I2C*
Inter-Integrated Circuit
HS-UART
High Speed Universal Asynchronous Receiver/Transmitter
SPI
Serial Peripheral Interface
SUT
System Under Test
MSDN
Microsoft* Developer Network
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
5
Build and Install Instructions
2.0
Build and Install Instructions
2.1
Building WEC*7/WEC*2013 Image
2.1.1
Installing the .MSI package on Platform Builder
Note: WEC7 path is [Primary disk]\WINCE700\PLATFORM” and WEC2013 path is
[Primary disk]\WINCE800\PLATFORM”
1. Double click Intel® Processor WEC IO BSP.msi to install the BSP. Press “Next”
button to proceed with the installation. This installs to the [Primary
disk]\WINCE700\PLATFORM” and creates a new directory called “INTEL_CS”
along with its subdirectories.
2. To confirm that the installation is complete, verify the existence of the “INTEL_CS”
directory on the path:
3. [Primary disk]\WINCE700\PLATFORM\INTEL_CS” and the items listed above
in the “What’s New” section are on the following paths:
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\BOOTLOADER\EBOOT
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\BOOTLOADER\EBOOT\E100EBOOT\BIN
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\INC
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\IO
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\IOCTL
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\KITL
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\MPSUPPORT
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\MEMORY
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\POWER
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\COMMON\PDQOAL\STARTUP
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\ICHHDA
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\GPIO
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\I2C
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\SPI
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\HSUART
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\USB30
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\BLOCK\ATAPI
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\DRIVERS\DMA
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
6
Document Number: 332154-005US
Build and Install Instructions
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\KITL
 C:\WINCE700\PLATFORM\INTEL_CS\SRC\OAL\
2.1.2
Creating a Project
1. Run Microsoft* Visual Studio* 2012 for WEC2013, or Microsoft* Visual Studio*
2008 SP1 for WEC7.
2. Go to File  New Project.
3. Select project type “Platform Builder”.
4. Select “OS Design”, under “Visual Studio Installed templates”. By default
OSDesign1 will be assigned as the project name.
5. Select OK.
6. After the design wizard pops up, select NEXT. This will take you to the “Board
Support Packages” selection window.
7. Select “INTEL_CS: x86”, then click Next.
8. At “Design Templates”, select NEXT.
9. At “Applications and Media”, select NEXT.
10. At “Networking and Communications”, select NEXT.
11. At “OS Design Project Wizard Complete”, select FINISH. The platform builder will
generate project files for your project. Acknowledge any warnings that may pop-up
from Visual Studio. The default project name for your generated project will be
“OSDesign1” under C:\WINCE700\OSDesigns\OSDesign1.
2.1.3
Catalog Item Selection
Select the following catalog items in the Visual Studio* Catalog Items View prior to
building the project image.
2.1.3.1
Table 2.
Windows Embedded Compact* 7
Catalog Item Selection for Windows Embedded Compact* 7
Feature
Catalog Item Path
Active Sync
Core OS\Windows Embedded Compact\Applications - End
User\ActiveSync
Word Pad
Core OS\Windows Embedded Compact\Applications – End
User\WordPad
.NET Compact Framework
3.5
Core OS\Windows Embedded Compact\Applications and Services
Development\.NET Compact Framework 3.5\.NET Compact
Framework 3.5
C Libraries and Runtimes
Core OS\Windows Embedded Compact\Applications and Services
Development\C Libraries and Runtimes\C++ Runtime Support
for Exception Handling and Runtime Type Information
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
7
Build and Install Instructions
Feature
Catalog Item Path
Networking
Core OS\Windows Embedded Compact\Communication Services
and Networking\Networking – General\Network Utilities
(IpConfig, Ping, Route)
Wireless LAN
Core OS\Windows Embedded Compact\Communication Services
and Networking\Networking – Local Area Network
(LAN)\Wireless LAN (802.11) Headless STA
Core OS\Windows Embedded Compact\Communication Services
and Networking\Networking – Local Area Network (LAN)\
Wireless LAN (802.11) STA
ATAPI (SATA and PATA)
Core OS\Windows Embedded Compact\Device Drivers\Storage
Devices\ATAPI PCI Support
Core OS\Windows Embedded Compact\Device Drivers\Storage
Devices\ATAPI PCI Support\Basic ATAPI PCI CD/DVD-ROM
Support
USB Host
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Audio Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Printer Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB RNDIS Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Host Support
SD
Core OS\Windows Embedded Compact\Device Drivers\SD Bus
Driver
Core OS\Windows Embedded Compact\Device Drivers\SD Host\SD
Standard Host Controller
Core OS\Windows Embedded Compact\Device Drivers\SD
Clients\SD Memory
USB Mass Storage
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Storage Class Driver
USB Keyboard and Mouse
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Human Input Device (HID) Class
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Human Input Device (HID)
Class\USB HID Keyboard and Mouse
Storage Manager
Core OS\Windows Embedded Compact\File Systems and Data
Store\Storage Manager\Storage Manager Control Panel Applet
Core OS\Windows Embedded Compact\File Systems and Data
Store\Storage Manager\exFAT File System
Core OS\Windows Embedded Compact\File Systems and Data
Store\Storage Manager\FAT File System
Core OS\Windows Embedded Compact\File Systems and Data
Store\Storage Manager\Partition Driver
Mouse Cursor
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Mouse
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
8
Document Number: 332154-005US
Build and Install Instructions
Feature
Audio Codec
Catalog Item Path
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\MP3 Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\WMA Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\Waveform
Audio Renderer
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and
Renderers\Wave/AIFF/au/snd File Parser
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\MPEG-1 Layer
1 and 2 Audio Codec
For more audio codec types, please refer to MSDN.
Windows Media Player
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\WMA and MP3 Local Playback
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media \Windows Media Player\Windows Media
Player Applications\Windows Music Player
For Windows Media Player options, refer to MSDN.
Internet Client Services
Core OS\Windows Embedded Compact\Internet Client
Services\Browser Application\Flash10.1\Adobe Flash Player
10.1 ActiveX Control
Core OS\Windows Embedded Compact\Internet Client
Services\Browser Application\Internet Explorer 7.0 for
Windows Embedded Compact – Standard Components\Internet
Explorer 7.0 Sample Browser
Core OS\Windows Embedded Compact\Internet Client
Services\Internet Options Control Panel
User Interface
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Control Panel Applets
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Date Time Setting
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Display Setting
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Network Connection Setting
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Regional Setting
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Sound Setting
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\ Wi-Fi Setting
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
9
Build and Install Instructions
2.1.3.2
Table 3.
Windows Embedded Compact 2013
Catalog Item Selection for Windows Embedded Compact 2013
Feature
Catalog Item Path
.NET Compact Framework
Core OS\Windows Embedded Compact\Applications and Services
Development\.NET Compact Framework\.NET Compact Framework
– Windows Forms Support
C Runtime Library
Core OS\Windows Embedded Compact\Applications and Services
Development\C Runtime Library
Networking
Core OS\Windows Embedded Compact\Communication Services
and Networking\Networking – General\Network Utilities
(IpConfig, Ipv6, Ping, Route)
Wireless LAN
Core OS\Windows Embedded Compact\Communication Services
and Networking\Networking – Local Area Network
(LAN)\Wireless LAN (802.11) STA - Automatic Configuration
and 802.1x
KITL
Core OS\Windows Embedded Compact\Core OS
Services\Debugging Tools\Target Control Support
(Shell.exe)
ATAPI (SATA and PATA)
Core OS\Windows Embedded Compact\Device Drivers\Storage
Devices\ATAPI PCI Support
Core OS\Windows Embedded Compact\Device Drivers\Storage
Devices\ATAPI PCI Support\Basic ATAPI PCI CD/DVD-ROM
Support
USB Host
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Audio Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Human Input Device (HID) Class
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Human Input Device (HID)
Class\USB HID Keyboard and Mouse
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Modem Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Printer Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Remote NDIS Class Driver
Core OS\Windows Embedded Compact\Device Drivers\USB\USB
Host\USB Class Drivers\USB Storage Class Driver
SD
Core OS\Windows Embedded Compact\Device Drivers\Secure
Digital (SD) Bus Driver
Core OS\Windows Embedded Compact\Device Drivers\Secure
Digital (SD) Memory Support
Core OS\Windows Embedded Compact\Device Drivers\Secure
Digital (SD) Standard Host Controller
DirectDraw
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Graphics\DirectDraw
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
10
Document Number: 332154-005US
Build and Install Instructions
Feature
Media
Catalog Item Path
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\MPEG-1 Layer
3 (MP3) Audio Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Audio Codecs and Renderers\Windows
Media Audio (WMA) Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Media Formats\Audio-Video Interleaved
(AVI) Filter
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Media Formats\MPEG-4 Demultiplexer
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Media Formats\Wave/AIFF/au/snd Parser
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Streaming Media Playback
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Video Codecs and Renderers\DirectShow
Video Mixing Renderer
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Video Codecs and Renderers\MPEG-1 Video
Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Video Codecs and Renderers\Windows
Media Video (WMV) and MPEG-4 Video Codec
Core OS\Windows Embedded Compact\Graphics and Multimedia
Technologies\Media\Windows Media Audio (WMA) and MPEG-3
(MP3) Local Playback
Shell
Core OS\Windows Embedded Compact\Shell and User
Interface\Command Shell\Command Processor
Core OS\Windows Embedded Compact\Shell and User
Interface\Command Shell\Console Window
Graphical Shell
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Date Time
Settings
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Display Settings
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Network
Connection Settings
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Regional Settings
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Sound Settings
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Control Panels\Wi-Fi Settings
Minimal Shell
Core OS\Windows Embedded Compact\Shell and User
Interface\Graphical Shell\Minimal Shell
Shell API
Core OS\Windows Embedded Compact\Shell and User
Interface\Shell API
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
11
Build and Install Instructions
Feature
User Interface
Catalog Item Path
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Mouse
Core OS\Windows Embedded Compact\Shell and User
Interface\User Interface\Network User Interface
2.1.4
Build Option Configuration
From the Solution Explorer Tab, right click on the OSDesign project and click on
“Property”. Then, choose “Configuration Properties\Build Options”.
Table 4.
Build Option Configuration
Build Options
Enable KITL (IMGNOKITL)
Description
Please check if the system requires KITL transport connection to be
established when image is downloaded through eboot.bin.
Recommended to disable KITL if using local storage (nk.bin) for
boot process.
Caution: If KITL is enabled and image is booted from local
storage, the image may seem to hang or take much
longer to boot.
Enable SMP Support in the kernel
(IMGMPENABLE)
2.1.5
Please enable this build option for the Bay Trail EV/CRB fab3, Rev
03 Platform because they support hyper-threading and multi-core.
Enabling the Intel® Ethernet Driver in WEC7 and WEC2013
This section lists the steps for enabling the Intel® Ethernet Driver:
1. Download the “Intel® Ethernet Drivers for Microsoft* Embedded
Operating System - PROEMBSW12.zip” from Intel® Download Center.
2. Extract the “PROEMBSW12.zip” file and double click on “PROEMBSW.exe” to start
installation. Click “Next” until installation is completed. This installs the Ethernet
driver at “C:\PROEmbSW12”.
3. For WEC7: Go to “C:\PROEmbSW12\PRO1000\WINCE 6.0\PCIe”, copy
“e1e51ce6.dll” and “e1e51ce6.rel” to C:\WINCE700\platform\INTEL_CS\FILES
Note: These are the Ethernet driver binary files for Ethernet via PCIe* INTEL® PRO/1000
PT SERVER ADAPTER card for Intel® Atom™ E3800 Platform.
4. For WEC2013: Go to “PROEmbSW12\PRO1000\WEC2013”, copy “e1i61ce8.dll”,
“e1iceisr.dll”, “e1i61ce8.rel”, and “e1iceisr.rel” to
C:\WINCE800\platform\INTEL_CS\FILES
Note: These are the Ethernet driver binary files for Ethernet via PCIe* INTEL® GIGABIT
CT DESKTOP ADAPTER card for Intel® Atom™ platform E3800.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
12
Document Number: 332154-005US
Build and Install Instructions
5. Go to the INTEL_CS directory. Open the “INTEL_CS.bat” file and append the
following flag at the end of the file before the line “:not_nm10”:
6. For WEC7:
set CEPB_INTELE1E_PCIE=1
set STATIC_IP=1
For WEC2013:
set CEPB_INTELE1I_PCIE=1
set STATIC_IP=1
7. Go to INTEL_CS\FILES directory. Open the “platform.reg” file and append the
registry entry.
8. For WEC7, copy the registry entry from “C:\PROEmbSW12\PRO1000\WINCE
6.0\PCIe\e1e51ce6.reg” file at the end of the file.
9. For WEC2013, copy the registry entry from
“PROEmbSW12\PRO1000\WEC2013\e1i61ce8.reg” file at the end of the file.
10. Go to INTEL_CS\FILES directory. Open the “platform.bib” file and append the
following at the end of the file:
11. For WEC7:
IF CEPB_INTELE1E_PCIE
E1E51CE6.dll
$(_FLATRELEASEDIR)\E1E51CE6.dll
ENDIF CEPB_INTELE1E_PCIE
NK
SHK
NK
SHK
NK
SHK
For WEC2013:
IF CEPB_INTELE1I_PCIE
E1i61CE8.dll
$(_FLATRELEASEDIR)\E1i61CE8.dll
ENDIF CEPB_INTELE1I_PCIE
E1iCEISR.dll
$(_FLATRELEASEDIR)\E1iCEISR.dll
12. Make sure the following catalog items are enabled: Core OS-> Windows
Embedded Compact-> Applications-End User-> ActiveSync
2.1.6
Enabling SD/SDIO Driver in WEC7 and WEC2013
The SD/SDIO host controller is based on SD3 specification. Therefore, capable of
supporting Ultra High Seed (UHS) speed mode, on top of Default Speed (DS) and HighSpeed (HS). UHS support can, however, be turned off at build time optionally if the
hardware do not support it with the following build variable:
1. Go to INTEL_CS directory. Open the “INTEL_CS.bat” file and append the following
flag at the end of the file before the line “:not_nm10”.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
13
Build and Install Instructions
For WEC7:
set BSP_SDHC_NOUHS=1
For WEC2013:
set BSP_SDHC_NOUHS=1
2.1.7
Enable legacy Programmable Interrupt Controller (PIC)
This BSP is default to build with LAPIC/IOAPIC support. However, user can optionally
enable legacy PIC mode through the build script. This applies to both WEC7 and
WEC2013.
1. Go to INTEL_CS directory. Open the “INTEL_CS.bat” file, locate the line following
line in the script:
if not "%BSP_PLATFORM%"=="0" goto :not_BAYTRAIL
2. Set the BSP_APIC and BSP_ACPICA variable within this section to “0”.
set BSP_APIC=0
set BSP_ACPICA=0
2.1.8
Build the WEC7 and WEC2013 Image in Release Mode
1. Complete all the steps listed in “Creating a Project”.
2. Under the Solution Explorer tab, right click on the project name (default name is
OSDesign1) and select “Properties”.
3. Change the “Configuration” to “INTEL_CS x86 Release”.
4. Select on Configuration Manager.
5. Make sure “Intel_CS x86 Release” is selected in the “Active solution configuration”
field.
6. Make sure “Intel_CS x86 Release” is the selected under “Project
contexts”. Ensure the check box under the “Build” column is checked.
7. Close the project configuration windows.
8. The project is now ready to commence the build. From Microsoft* Visual Studio*
2008, go to the “Build” Menu and click “Build Solution”. The build process typically
takes one-hour to complete. The actual duration of the build completion depends
on the specific hardware of the build machine, software, and platform
configurations chosen. Different stages of building and their progress can be
viewed in the “Output” window.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
14
Document Number: 332154-005US
Build and Install Instructions
9. The build process completes with a sequence of messages shown in “Output”
window similar to the following:
MAKEIMG: BUILDMSG: Calling
C:\WINCE700\OSDesigns\OSDESIGN1\OSDESIGN1\RelDir\INTEL_CS_x86_Release
\PostRomImage.bat
MAKEIMG: BUILDMSG: Calling
C:\WINCE700\OSDesigns\OSDESIGN1\OSDESIGN1\RelDir\INTEL_CS_x86_Release
\PostMakeImg.bat
MAKEIMG: BUILDMSG: Calling
C:\WINCE700\public\common\oak\misc\pbpostmakeimg.bat
MAKEIMG: BUILDMSG: Make Image process completed successfully
BLDDEMO: BUILDMSG: OS image exists at
C:\WINCE700\OSDesigns\OSDESIGN1\OSDESIGN1\RelDir\INTEL_CS_x86_Release
\nk.bin
BLDDEMO: BUILDMSG:
Volume in drive C is OSDisk
BLDDEMO: BUILDMSG:
Volume Serial Number is B820-910F
BLDDEMO: BUILDMSG:
Directory of
C:\WINCE700\OSDesigns\OSDESIGN1\OSDESIGN1\RelDir\INTEL_CS_x86_Release
BLDDEMO: BUILDMSG: 02/14/2011
04:28 PM
37,686,963 NK.bin
BLDDEMO: BUILDMSG:
1 File(s)
37,686,963 bytes
BLDDEMO: BUILDMSG:
0 Dir(s)
52,106,936,320 bytes free
BLDDEMO: BUILDMSG: cebase build complete.
BLDDEMO: BUILDMSG: BldDemo ended at 16:29:01.69 on Mon 02/14/2011
(exit code 0)
BuildLogs: BUILDMSG: Exiting: BldDemo1.bat
-c -qbsp (result code 0).
BuildLogs: BUILDMSG: C:\WINCE700\build.log
BuildLogs: BUILDMSG: C:\WINCE700\build.out
BuildLogs: BUILDMSG: C:\WINCE700\build.wrn
Note: You will see some warnings during the build process and in the eventual output, but
these can be considered harmless.
Once the build is successful, the kernel image nk.bin can be found in the following path:
C:\WINCE700\OSDesigns\OSDesign1\OSDesign1\RelDir\INTEL_CS_x86_Rel
ease
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
15
Build and Install Instructions
2.2
Booting WEC*7 and WEC*2013 on Intel® AtomTM E3800
Product Family and Intel® Celeron® Series Platforms
2.2.1
Setting up the BIOS
The BOOT settings also need to be configured appropriately to boot up the hardware
platform through the relevant boot device. After entering the BIOS, follow the
instructions below to configure:
Go to Intel advanced menu and set below configuration:
 Device Manager -> System Setup > Boot > OS Selection: select WEC7
 Device Manager -> System Setup -> South Cluster Configuration—
LPSS & SCC Configuration
 LPSS & SCC Device Mode = “PCI Mode”
 SCC SD Card for Windows = “Enable”
 Device Manager -> System Setup -> Uncore Configuration
 GOP Driver = “Disable”
 Device Manager -> System Setup -> South Cluster Configuration—
Audio Configuration ->Audio Controller = “Enable”
2.2.2
Boot the WEC7 and WEC2013 Image
The following instructions need to be followed to ensure that your booting device is
enabled properly to boot-up the hardware platform. This example assumes you are
using a SATA Hard Disk as your booting device. You can find the third party tools
mentioned within this subsection online.
1. Install Hewlett Packard* USB Disk Storage Format Tool and Winimage
on your pc/platform builder.
2. Extract win98boot.zip to any folder.
3. Plug in SATA hard disk to pc/platform builder via SATA-USB converter.
4. Run the Hewlett Packard* USB Disk Storage Format Tool.
5. Select the USB drive that you want to make bootable from “Device”.
6. Select FAT32 for the “File System”.
7. Enter the volume label and tick “Quick Format” for faster format time. (Optional)
8. Select “Create a DOS startup disk” and select “using DOS system files located at:”
9. Browse to the extracted win98boot folder by clicking the “…” button.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
16
Document Number: 332154-005US
Build and Install Instructions
10. Click “Start”.
11. The newly formatted SATA hard disk should contain “command.com, io.sys and
msdos.sys”.
12. Open Winimage, click “File” and select “Open”.
13. Search for the cepcboot.144 files from the platform builder and click “Open”.
(C:\WINCE700\platform\CEPC\src\bootloader\dos\bootdisk\diskimage\cepc
boot.144)
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
17
Build and Install Instructions
14. Click “Image” and select “extract”.
15. Browse the path, select “Extract with pathname” and click “OK” to extract the
contents of cepcboot.144.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
18
Document Number: 332154-005US
Build and Install Instructions
16. Copy all the files extracted from cepcboot.144 to the bootable SATA hard disk.
17. Click “No” when a message appears saying that it want to overwrite existing files.
18. You should see the following files inside your bootable SATA hard disk.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
19
Build and Install Instructions
19. Copy nk.bin into the bootable SATA hard disk.
20. Edit the autoexec.bat by deleting all the data inside the autoexec.bat and
replace it with “loadcepc /L:800x600x16 nk.bin”. Save and close it.
21. Now plug in the SATA hard disk to the CRB and it will be able to boot the WEC 7
image (nk.bin) that has been created.
2.2.3
Loading the Image on BIOS through the KITL Connection
This section describes the process for loading the image on the BIOS through the KITL
connection on Baytrail EV/CRB fab3 Rev 03 platform and D0 Processor.
During the development stage, the nk.bin can be transferred between Microsoft*
Platform Builder and the target platform via the Ethernet-based KITL connection. There
are two options in Baytrail EV/CRB fab3, Rev 03 platforms and D0 processors for
Ethernet-based KITL:
Intel® Pro/1000 PT Server Adapter
To build an eboot.bin image that can support the Intel Pro/1000 PT Server Adapter,
make sure the following build setting is enabled in the INTEL_CS.bat file:
set BSP_KITL_POLL_MODE=1
set BSP_KITL_INTELGBE_E1000=1
Note: The eboot.bin is available in C:\WINCE700\OSDesigns\OSDesign1\
OSDesign1\RelDir\INTEL_CS_x86_Release\ when the BSP is built.
Note: Remember to enable KITL (IMGNOKITL=) on the BSP’s project build option as explained
above in order to build an nk.bin image that starts the KITL connection by default.
For details on loading image eboot, refer to: http://msdn.microsoft.com/enus/library/ms930104.aspx
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
20
Document Number: 332154-005US
Build and Install Instructions
2.2.4
Loading nk.bin via eboot.bin over KITL Connection
1. Copy eboot.bin onto the MS-DOS formatted USB mass storage with
loadcepc.exe.
2. Connect the development PC to target platform via Ethernet cable over Gigabit
switch.
3. Configure the development PC Ethernet card with local IP address & mask, e.g.,
172.30.179.1/255.255.255.0
4. On the command prompt of the target platform, type the following “C:\loadcepc
/e:0:0:172.30.179.2 /L:800x600x16 eboot.bin” for the Intel Platform.
5. Once the eboot.bin is loaded, the target platform will send a BOOTME message to
Microsoft* Platform Builder.
6. From Microsoft* Platform Builder, click the menu “Target\Connectivity
Options” and make sure the configurations are as follows:
Note: The target platform is chosen from the “Settings” button next to “Kernel Download:
Ethernet option.”
7. Once the “Target Device Connectivity Options” window is properly configured, click
“Apply” or “Close”.
8. Next, to attach the target platform, click the “Attach Device” button as highlighted
below.
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
September 2016
User Guide
Document Number: 332154-005US
21
Build and Install Instructions
9.
Finally, you will see the nk.bin image is downloaded over the Ethernet link and the
platform is then booted up with KITL messages displayed at the “output” window of
Microsoft* Visual Studio.
§
BSP for WEC*7 and WEC*2013 for Intel® Atom™ Processor E3800 Product Family
/Intel® Celeron® Processor N2807/N2930/J1900 Release
User Guide
September 2016
22
Document Number: 332154-005US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising