IN-DASH 7 WIDE SCREEN 16:9 LCD MONITOR Cautions: Keep lower volumes to concentrate on traffic and road conditions for safety driving. When washing car keep Car DVD AV System (including speaker and disc) from water ordamp inorder to avoid electric shorts or otherdamages. Maintenance consisting of delicate components, please avoid random disassembling or adjusting any parts. If requiring repair, please go tonearby Professional Maintenance Center for an inguiry. This unit is for carwith a 12-voit battery and negative grounding. Laser Disc System Do not put little objects like coins into the product. Do not place screwdrivers or other metals near disc orlaser Disc Player. Car ventilation Parking in direct sunlight for several hours will cause higher temperature in the car, So start the car firstto cool down the internal temp, and then open the AV system. Preset Memory After cut off power supply, preset memory will disappear and the whole system will returnto the prescribed state when delivering from the factory. Installation The unit should be installed horizontal with front side up less than 15° . Video system of a connected component This product is NTSC/PAL system compatible. When connecting other components to this product, be sure components are compatible with the same video systems. Ifit is not, images will not be correctly reproduced. Region numbers: DVD players and DVD discs feature region numbers indicating the area in which they were purchased. Playback of DVD is not possible unless it features the same region number as the DVD player. This product's region number is displayed on the bottom of this product. | cannot choose a ratio of a screen *A DVD disc is manufactured as 16:9 wide, 4:3 Movie, and 4:3 screen according to a normal state of manufacture, a 16:9 wide disc can be seen as a 16:9 wide, 4:3 movie or 4:3 enlarged mode, and a 4:3 disc always provides a 4:3 screen. *After affirming a DVD disc case, choose the function in suit with an action and use. For reference a 4.3 standardized disc does not teleview with an wide. Dolby digital 5.1 channel cubic sound does not sound. *Dolby digital 5.1 channel cubic sound can be heard when it is matched to an exclusive dolby Digital amp, and the disc recorded as ‘Dolby digital 5.1 CH’ among DVD discs is only played. Desirable spoken language and subtitles do not motion. *Only language sounds and subtitles recorded on the DVD disc motion and are replayed according to the recording. A screen angle does not motion during the replay. *The reproduction of a screen angle can be modified only if photographing per each angle is recorded on a DVD disc, and it moves only in case that an indication of angle presents on the product and TV TROUBLESHOOTING Make inquiries to a service center after tuning off the power if the same phenomenon occurs after treating as below. In case that disc is running but an image does not appear or an image appears but the screen quality is bad and shakes. *Confirm the power of the TV is on. *Confirm the connection is good. *Confirm the body is in a state of an instant stop. *Confirm the disc is stained with alien materials or Damaged. *It can be not replayed when the manufacturing state of Disc is bad. *During the replay there can be, in a moment, shakes of screen up-and-down when a screen is changed from dark scene to a bright scene, but it is not a Breakdown and be reassured. The quality of sound does not Make even. *Confirm the connection with a Dolby digital amp. *Confirm the connecting plug is not loose. *Confirm the connecting terminal is not stained By Allen Materials. The remote control does not moion. *Confirm the angle of a remote control and distance is Suitable and there is not any obstacles. “Confirm the flashlight battery of a remote control is enough. An image or sound does not mo, or a disc comes up after 2 to 5 Seconds. *Wasn't the product moved from a cold place to a Warm place suddenly? Replay does not act. *In this case, after drawing out the disc, do not use 1 to 2 hours at the state of the power on.(if dew is Disappeared, you can use again.) *Confirm the disc is inserted. “Confirm the disc is put correctly in order to the Printed side is upside. “In case of a DVD the disc purchased abroad can be not Replayed. “Confirm the regional code number of the disc is 1. No sound *Don't you replay with a slow motion or a screen of a divided movements? (In the state replaying the speed-change screen, it does not sound.No sound *After confirming the connection, ascertain the SET UP is correctly established. *Didn’t you put the disc upside down?(The printed side of the disc should be put upward.)(Wasn't the disc damaged excessively?)(Rub the disc cleanly.) It is not run as the primary set-up of the product. *The setup depends on the function of the disc(that of manufacture), the disc which has the same function as a setup menu is run. Care of discs How to hold disc Do not touch the face of the information side. Do not scratch the disc. Do not bend the disc. When notin use, put away the disc. Do not use irregular and deformed discs. Do not leave the disc in following places: Direct sunlight Near car heaters Dirty, dust and damp areas Seats and dashboards Disc cleaning Use a dry and soft cloth to wipe from center to outward. Cautions on new discs Remove the inner and outer rough edges on new discs with a pencil, which may cause malfunctions. DON'T USED ABNORMITY DISC COARSE EDGE COARSE EDGE The Specifications DVD Output Mode NTSC/PAL Dynamic Range 90dB S/N Ratio 100dB Audio Output 1.0Vrms : Open Output Digital Audio 1.0Vp-p : Open Video Output 1.0vp-p : 750 Power Requirements DC 12V, 1A Power Consumption 12W Dimension 174(D) x 178(W) x 26(H)mm Weight 1.85Kgs Operating Temperature Range 0C-+55C Storage Temperature Range -30C-+60C Operating Humidity Range -30% - 60% D 10 ©) O | 7 == AZ —] = m — — lt — -— —_—t E 5, / ren) <— ve UL MENU ]/ m 7/ - | (O EZ \' - NN ; —) a) Au FE) (mos) (4) 4] e) 4) a) [ [&— ~ | | | | 1.ОРЕМ Press this button to unfold the TFT Screen 2.POWER Turns the power on/off 3.PLAY/PAUSE To start/ Pause 4.DISC IN À Disc is inserted here 5.SKIP Use to skip a scene or music 6.EJECT A Discis ejected by this button 7.IR Transmitter 8.MENU To enter into the main menu of TFT Screen 9.MODE Use this button to choose DVD system or import system 10.V+ To increase the volume level 11.V- To decrease the volume level Scanning Screen You can find the desired screen or song by lapsing time, title, chapter, track. To Scan by Lapsing Time (for example by 1 hour 5 minutes 15 seconds) Press the “(DISP)” button. Press the Arrow buttons to move to time item. Press "(ENTER)" button. Press the buttons “1, 0, 5, 1, 5’ using numeric button, and press the “(ENTER)” button. It plays the section lapsing 1 hour 5 minutes 15 seconds. To Scan by Title, Chapter Press the “(DISP)” button. Press the Arrow buttons to move to title/chapter item. Enter the desired title or chapter, and press the “(ENTER)” button. Description 1.L OUT 2.R OUT 3.4.AUX IN 5.VIDEO IN 6.VIDEO OUT Description m © m O + TU о = m A ® x SC TITLE SUBTITLE RETURN 9) À A MODE DISP OOO a > < 5 > с aA m ZOOM Me. 000 REPEAT DBO ~ A ANI A Y —> — VIN IEA iS) Ls ho RANDOON PROGRAM AUDIO ОФФО ФО ОО NY Y NY == DOVE PBC 00016 ) MENU | DO < (3) г + BREYER © © © © B® O 6 Off : When you do not want to repeat playback Track : when you want to repeat present track Disc : when you want to repeat present disc To Repeat a Particular Section Press the “(A-B)” button at the position from which you want to repeat. Press the A-B button at the starting position and press the “(A-B)” button once more at the end position of the desired section. The selected segment (A-B) will be played repeatedly. To release repeat operation. Press the “(A-B)” button again. Enjoying magnified screen and Changing Camera Angles To Enjoy Magnified Screen (DVD/VCD) You can magnify the screen with 2 phases Press the “(ZOOM)” button in play or pause state and the screen ratio is displayed on screen. Each press of the “(ZOOM)” button enlarges screen in the following sequence 400%, 1600% and Off. You can move magnified screen by pressing the Arrow buttons. Changing Camera Angle (DVD) When a DVD contains multiple angles of a particular scene, you can select the Angle function. Press the “(ANGLE)” button. The Angle icon is present, and the maximum number of screen appears. Press the “(ANGLE)” button, select the Camera Angle you want. If the maximum number of screen is 1, the Camera Angle does not change. Press the “(NEXT)” button Moves to following chapter/track of present chapter/track. To Scan Screens or Songs Fast (DVD/VCD/CD) Press “(FF)” / “(FR)” buttons Play speed changes in the sequence of 2X, 4X, 16X, 100X. Press the “(PLAY)” button to play at normal speed. You can not listen sound during fast forwarding or fast rewinding. Fast forwarding/rewinding does not operate while playing MP3. Slow/Divided motion To playback slow motion. Press the “(SLOW)” button. Play speed changes in the sequence of 1/32, 1/16, 1/8, 1/4, 1/2 each time pressing the “(SLOW)” button. Press the “(PLAY)” button to play at normal speed. You can not listen sound during slow playback. Slow playback does not operate while playing CD/MP3 Repeating Playback To Repeat a Chapter, Title, or Track (DVD/VCD/CD) During playback mode, press the “(REPEAT)” button. Keep pressing "(REPEAT)" button to choose repeating a Chapter, Title, Track, Disc or OFF. DVD mode Off : When you do not want to repeat playback Title : when you want to repeat present title Chapter : when you want to repeat present chapter CD/MP3/VCD Description 1. POWER Press power button to turn On/Off the power 2. Eject use to insert or eject disc 3. MODE Use this button to choose DVD system or import system Note: No signal of video import, mode button is not functional. 4, PAUSE/PLAY Press the button to suspend the playback of CD,MP3,VCD,DVD, Press it again to return to normal playback mode. 5. FF Forwards through the dice form 2X to 100X faster,(VCD:2X to 8X) 6. NEXT Use to move to the next chapter(DVD) or track (VCD,CD,MP3) 7. BACK Move to the previous chapter(DVD) or track (VCD,CD,MP3) FR со Reverse through the disc. 9. STOP Stop the current disc playback. Press STOP to enter the resume stop mode. Press PLAY under the resume stop mode to resume the playback from the location where you stopped the playback previously. Press STOP two times consecutively to enter the clear stop mode. Use the clear stop mode, if PLAY is pressed, the disc will resume the playback from the beginning of the disc. 10. SLOW Forwards or reverse through the disc from 1/2X to 1/32X faster. 11. DISP Shows the information about title chapter of the disc when playing. 12. Number Button Use when making selection on menu screen The number button during the playing mode, you can select any track directly by using number button Note: vcd-PCB mode play, number button is not functional. 13. Repeat Press repeat if user wants to repeat the whole disc or a specific track/chapter of the disc. 14. TITLE In DVD playing mode. Press TITLE key to show all tracks title on TV screen. Then press NUMBER key to choose you desired track number and press ENTER key or PLAY/PAUSE key to start. Note:1. Not title display in MP3,CD mode. 2. For choose a desired language to press title key. 15. SUBTTTLE Press SUBTITLE to bring up the subtitle information shown on the top right comer of the screen. 16. RETUTN Press RETURN to stop the disc play back and get back to the menu. 17. RANDOM Press this button for system ran doming. 18. PROGRAM For MP3/CD disc, it supports a special function: Program Playback, function not available in DVD/VCD disc. It allows you to enter the order in which you want the disc play. 19. AUDIO To select audio system. 20. ANGLE Press ANGLE one time to bring up the angle information shown on the top right corner of the screen. Each time you press ANGLE, the camera angle changes. When camera angle menu is not displayed, press ANGLE to bring up the camera angle menu forcefully 21. MUTE Turn off the sound. 22. ZOOM The ZOOM feature allows you to magnify a certain on the images recorded on the DVD,VCD and other image discs. 23. UP/DOWN/LEFT/RIGHT Down~CH- RIGHT~CH+ 24. ENTER The UP/DOWN/LEFT/RIGHT and ENTER are driver selection you want to playback. 25. SETUP Use to set various functions according to individual preference. 26. VOL+ To increase the volume level. 27. VOL- To decrease the volume level. 28. A-B Repeat the selected segment. 29. РВС When the disc control PBC, press this button to access various camera angles. 30. MENU TO enter into the main menu of DVD disc. DISC PLAYBACK MODE Loading 1. Press EJECT button on unit or remote control to eject disc. The disc will automatically come out. 2. Slightly push the disc into disc window and the disc will be slotted in automatically. Press EJECT button on remote control can also make disc slotted in. Notes: 1 Set the disc securely. Failure to set it securely could result in damage. 2 Do not use cracked or warped discs. Doing so could result in damage. 3 Push DVDs or CDs in with the label (printed) side facing upwards. 3. The player starts loading. Disc Menu You can select the following menu when menu are recorded in discs. To display recorded menu in disc DVD/VCD 2.0 Press the “(DVD MENU)” button on remote control. The menu recorded in discs appears. Menu appears differently depending on discs. Press the arrow buttons to move to item you want, and press the “(ENTER)” button. Setting DVD Setting up language You can set up text language, subtitles, audio language, and disc menu language. Various Language and Subtitle Settings During DVD disc playback, press the "(AUDIO)" button. The current audio language appears on the screen, keep pressing "(AUDIO)" button until the audio language you want appears. Numbers of languages depend the DVD disc. Selecting Subtitles Language Press the “(SUBTITLE)” button to change subtitles. You can select various subtitles English, Japanese, Chinese - by pressing the “(SUBTITLE)” button (DVD), if disc has subtitle information. Turn off subtitles by pressing the “(SUBTITLE)” button, if you do not want subtitles. Scanning Screen/Song To Skip Screens or Songs (DVD/VCD/CD) Press the “(BACK)” button Moves to beginning of present chapter/track. If you press once more, it moves to previous chapter/track.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project