Camera Precaution ................................................ 1

Camera Precaution ................................................ 1
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
.u
a
co
m
0.
13
Autogood products Internet store “130”
Co n t en ts
13
0.
co
m
.u
a
Camera Precaution ................................................ 1
Technical Specification .......................................... 2
Camera Description ............................................... 3
Camera Mounting Description ............................... 5
Battery Installation ................................................ 7
Turning On/Off the Camera ................................... 8
Taking Video Footage ............................................ 8
Menu Settings ........................................................ 9
VGA/QVGA Shifting ................................................ 9
Deleting video footage .......................................... 9
Time setting
set the Year/Month/Date/Hour/Minute ............. 10
Playing back video footage on TV ........................ 11
Connecting to PC& PC CAM ................................. 12
Troubleshooting ................................................... 14
Autogood products Internet store “130”
Camera Precaution
Notice the following guidelines when using your camera
*
The action cam is not shock-proof. You should avoid dropping it.
For your safety, do not press the buttons on the camera during sports activities.
* Do not place the camera in a damp or dusty location for extended periods of
time. This may cause a fire or an electrical shock.
* Do not leave the camera in places exposed to extremely high temperatures, such
as under direct sunlight for extended periods of time. This may affect the camera
housing and internal components
* Clean the lens with a blower (typically a small device with a rubber bulb
attached to one end that you pump to produce a stream of air out the other
end), or wipe it with a soft cloth in a spiraling motion to remove fingerprints or
dust.
* We recommend using Alkaline batteries in temperatures between 0 °C to 40'C.
*Turn off the camera before removing the batteries and the memory card. The
card and the data may be damaged if the memory card is inserted or removed
while the camera is still on.
* Remove the batteries and memory card before storing the camera for long
periods of time, then keep it in a well-ventilated place to prevent mould.
13
0.
co
m
.u
a
*
Autogood products Internet store “130”
Technical Specification
'Sensor 1,З Меgа pixels CMOS sensor /*Lens All glass lens
Built-in memory 64MB
*
SD Memory Card slot support up to 8G (Not included)
*
Movie storage:
.u
a
*
co
m
VGA 640 x 480 pixels (50 FPS) QVGA320 x 240 pixels (50 FPS)
Movie format AVI
*
USB
*
Battery 2 x AAalkaline batteries
13
0.
*
Autogood products Internet store “130”
5.
6.
7.
8.
9.
10.
11.
12.
13.
co
m
3.
4.
Lens
Camera grip
Screw
Nut
Handlebar grip
Helmet grip
O-ring
USB cable
AV cable
Short Velcro strap
Long Velcro strap
Rubber head strap
Bolt
0.
2.
13
1.
.u
a
Camera Description
Autogood products Internet store “130”
6.
7.
8.
9.
10.
11.
.u
a
5.
co
m
4.
0.
3.
LCD display
ON/OFF & Enter button
Movie shutter button
Menu button
Microphone
Mini-USB port
AV port
SD card slot
SD card (not included)
Battery door
2X AA Batteries (not included)
13
1.
2.
Autogood products Internet store “130”
Camera Mounting Description
The camera can be mounted in a number of ways Using the straps
provided. Please follow the methods of mounting as suggested below:
Fixing the position of the camera
a) Turn it anti-clockwise to screw the camera tight and fix it into position.
b) Turn it clockwise to unscrew the camera.
.u
a
Mounting the camera onto the helmet using the silicon rubber
strap
1. Thread the silicon rubber strap through the helmet grip.
co
m
2. Mount the helmet grip to the helmet using the silicon rubber strap. 3+4. Slide the camera into
the helmet grip. Turn it anti-clockwise
13
0.
5. Adjust the angle of the camera making sure it's tight. To avoid damaging the camera, the mount
lock at the base must be loosened before twisting the camera.
Autogood products Internet store “130”
Mounting the camera using the Velcro strap:
1+2.Place the helmet grip on the helmet, and thread the Velcro strap
through the helmet grip.
3. Secure the Velcro strap by fastening it through the helmet vents.
co
m
.u
a
4. Slide the
camera into the
helmet grip, and
adjust the angle
of the camera
making. sure it's
tight.
Mounting the camera using the handlebar grip:
1. Place the handlebar grip on the handlebar.
2. Add the screw and nut to hold the handlebar grip securely.
13
0.
3. Slide the camera into the handlebar grip and make sure the handlebar grip is locked with the
camera.
4. Adjust the angle of the camera.
Autogood products Internet store “130”
Battery Installation
1. Unscrew the cover at the end of the unit.
2. Place yourfinger on the 'lip', which is on the bottom half of the rear of
the unit, and open the battery slot door.
3. Insert 2 x AAalkaline batteries into the battery slot according to the
polarity direction as shown.
co
m
.u
a
4. Close the battery slot door and screw on the end of unit cove
Important: When the battery is low, the low battery icon will appear on
the LCD display.
Always upload video footage to your PC prior to
replacing batteries to avoid memory loss
Note:
a) Do not mix old and new batteries together. Replace both batteries at
the same time.
0.
b) Remove the batteries if the camera is not going to
be used for long periods of time. This will save battery life.
13
c) Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries
(nickel-cadmium). Only batteries of the same or equivalent type as
recommended are to be used together.
Non-rechargeable batteries are not to be recharged
Autogood products Internet store “130”
Turning the Camera On
Press and hold the power button, The LCD display will light up (one
beeping sound). It enters video mode, The time displayed on screen is
the remaining time for taking video, the first two numbers display hours,
the last two numbers display minutes.
Turning the Camera Off
.u
a
Press and hold the power ф button for 2 seconds, The LCD display OFF
(you will hear beeping sounds), and then the LCD display will turn off
co
m
after 1 second.
Taking Video Footage
1. Aim at the subject you want to shoot.
2. Press the 'Shutter button' to'start recording. The LCD will
0.
display the time has been recorded. The first two digits are
minutes; the last two digits are seconds.
13
3. Press the Shutter button' again to stop recording, after which
the video remaining time will be shown(The remaining time
is an estimate only).
Remark: The system will stop taking video if the built in memory or external memory is full,
the LCD screen will display "Full".
Autogood products Internet store “130”
Menu Setting
VGA/QVGA Shifting (Video resolution setting)
Press and hold the Menu button for 2 seconds, When the VGA icon
640 x 480 flickers (at
.u
a
the top ofthe LCD display), press the Shutter button once to shift to QVGA
320 x 240, then
press the menu button to confirm. If to quit the setting, press the menu button. To shift from
QVGAto VGA, press the menu button for 2 seconds, when QVGA icon
1 .Default resolution is 640x 480(VGA
).
0.
Deleting video footage
, then press the menu button to confirm. If to quit the
co
m
Shutter button once to shift to VGA
setting, press the menu button. Note:
flickers, press the
flicks , press the shutter
13
Press the Menu button for 2 seconds to enter into setting, the VGA
button, it come out QVGA
setting, then press again the shutter button to enter into the secondary
menu, the letter "D" (mean delete)exist on the LCD screen, the first item display "NO", means delete
no file, press the shutter button again, the second item display "ONE", press the menu button to delete
the last recorded video footage. Press again the shutter button, the third item display "ALL", press
again the
Autogood products Internet store “130”
menu button to delete all the video footage. To quit the menu and return to video mode, press
again the shutter button.
Time Setting
Press the Menu for about 2 seconds to enter setting, the VGA icon
", "NO", "ONE", "ALL" icon, when the icon "ALL" appears, long
.u
a
button repeatedly after it exists "
press the menu
button to enter time setting,
flicks , press the shutter
Set the Year
13
0.
co
m
1. The small icon "Y" flicker, meantime, The 3rd digit of Year flicker, press the 'shutter' button
to adjust number(20X1-20X9), then press the menu button to confirm, after which the last digit
of the
year flicks, press the 'shutter' button to adjust the number(201X-209X) then press the menu
button to confirm.
Set the Month
1 .After setting the year, the small icon "M" flicks on LCD, meantime the second digit of Month
flicks, press the 'shutter' button to adjust number (1-12), then press the menu button to
confirm.
Set the Date
2.After setting the Month, the small icon "D" flicks on LCD, meantime the second digit of date
flicks, press the 'shutter' button to adjust number (01-31) , then press the menu button to
confirm.
Autogood products Internet store “130”
Set the Hour
.u
a
3.After setting the Date, the small icon "H" flicker, meantime, The first digit of hour
flickers, press the 'shutter' button to adjust number(01-24), then press the menu button
to confirm
Set the minute
4.After setting the Date, the small icon "M" flicker, meantime, The first digit of minute
flicker, press the 'shutter' button to adjust number (01-59), then press the menu button to
confirm When time setting finishes, press the menu button to return to video mode.
co
m
Remark: If you want to skip the year, months, or other settings, press the menu to enter
into next setting: e.g. when set the year, if there is no need setting the third
digit, press the menu button once, then it will skip to next setting the forth digit
of year.
13
0.
Playing back video footage on TV
Connect the Action Cam to TV by using the AV cable.
Turn the TV and Action Cam on.
"AU" appears on the Action Cam LCD. TV is under the playback status, press the menu
button on camera you could select next video footage, and press the "shutter" button to
begin to playback the video, press the "shutter" button to pause playback, to continuous
video playing press the "shutter" button again.
During video playing, short press the menu button will stop the playing. Then long press the
menu button it will delete the current video footage. When there is no files in camera memory,
TV will display "NO IMAGE"
Autogood products Internet store “130”
Connecting to PC
.u
a
1.Turn the Action Cam on.
2.Connect the Action Cam to a PC via the USB cable.
3."PC" appears on the Action Cam LCD screen, open "My computer", check a new disk on your
computer, open the new disk you will see the video footages.
Remark: If there is no external memory card, PC will display the built in Memory disk, if
there is SD/MMC card, PC will display SD/MMC card storage disk.
0.
STK02N 2.0, follow the instruction steps until it finishes.
13
E.g.: double click
co
m
PC CAM
Open the disc equipped; install software to the computer as instructed by the following.
Autogood products Internet store “130”
.u
a
co
m
Long press the "Menu" button on camera first, then connect the camera to computer via USB
cable, the camera LCD will display "PC", open the "My computer", double click the camera icon
, you could use it as PC camera.
13
0.
Remark: When the voltage below 2.4V, low battery icon will displayed, you should prepare to
change the battery, when it run out of battery, the camera will continuous beeping, after three
seconds, the camera will shut off automatically.
When system inspect that there is a SD card, SD icon will display on LCD screen.
Additional remark: Ifuse high capacity SD card or there a re many files in storage, pis wait a
while after shift to the delete menu, it may take a longer time than usual to delete the files.
When deleting all the files, the letter "ALL" on the LCD will stop flickering, after it finishes
deleting, it flickers again on LCD.
Autogood products Internet store “130”
Troubleshooting
There's no display
-Are the batteries properly installed? -Do
the batteries need replacing?
0.
co
m
.u
a
After the Action Cam is connected to my PC, it cannot find the
new drive in the 'My Computer' folder
-Make sure each end of the Action Cam USB cable is properly and firmly
connected.
-Make sure your USB port is working properly. Try connecting another USB
device into the port. If the other device does not work, the USB port may
have a malfunction.
13
I can't capture the video footage
-Make sure there is enough space on the internal memory of Action Cam or
the SD card; the display will tell you how much time left for video recording.
-Make sure the SD card is not locked if you have inserted the SD card. It can't
take video ootage if the SD card is locked
Autogood products Internet store “130”
13
0.
co
m
.u
a
The remaining time is not accurate
-The remaining time is not always accurate, it is an estimate.
-The remaining time depends not only on the time recorded, but on the color
density of the video footage. Under conditions with high contrast, such as
outdoors, the actual time available will be less than under low-contrast
conditions, such as indoors.
I can't play the video footage on my television
-Make sure each end of the AV cable is properly and firmly connected to
Action Cam and your television.
-Make sure the Action Cam is turned on.
-Some captured video footage cannot be found when SD card is inserted the
video footage may be stored on the internal memory. Connect the Action Cam
to your PC without an SD card, and it will show the files in the internal
memory.
Tips:
The camera is high speed video camera, to help you to get high quality video
image, pis notice:
High speed branded SD/MMC card is recommended. Please format the SD card
before taking video, follow the steps:
1.
Insert SD card
2.
Turn on the camera
Autogood products Internet store “130”
13
0.
co
m
.u
a
3.
Press the shutter button for about 5 seconds, LCD display "FOR", wait
a moment it returns to video mode, the card is formatted successfully.
Autogood products Internet store “130”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising