Wi-Fi® Video Baby Monitor Camera

Wi-Fi® Video Baby Monitor Camera
USER’S GUIDE
Model: BLINK1
Wi-Fi® Video Baby Monitor Camera
The features described in this user’s guide are subject to
modifications without prior notice.
BLINK1_EU_A6_v9_2012_12_24.indd 1
24/12/2012 11:19 AM
Welcome...
to your new Motorola Baby Monitor Camera!
Thank you for purchasing the BLINK1 Wi-Fi® Video Baby
Monitor Camera. Now you can see and hear your baby sleep in
its room or you can monitor your older children in their playroom.
You can set up and view the camera video from your PC or
Notebook, as well as devices for Android™ or iPhone®/iPad®.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to
provide a copy of your dated sales receipt to confirm warranty
status. Registration is not required for warranty coverage.
For product related questions, please call/e-mail:
+49 (0) 1805 938 802
Email: motorola-mbp@tdm.de
This User’s Guide provides you with all the information you need
to get the most out of your product.
Please read the Safety Instructions on page 5 - 6 before you
install the unit.
Inside the Box
• 1 x Wi-Fi® Camera Unit (in either red, silver, white or black)
• 1 x Power Adapter
Overview of your Camera
1
2
8
3
4
5
9
7
10
6
1. Photo Sensor
(for night mode detection)
2. Infrared LEDs (for night vision)
3. Camera Lens
4. Power/Status LED
5. Microphone
11
6. Speaker
7. ON/OFF Switch
8. Antenna
9. Temperature Sensor
10. Power Adapter Connector
11. Reset Button
Important guidelines for installing your Wi-Fi® Camera Unit
• Use of other 2.4GHz products, such as other wireless
networks, Bluetooth® systems or microwave ovens may
cause interference with this product. Keep the Wi-Fi®
Camera Unit away from these types of products, or turn
them off if they appear to be causing interference.
• Always ensure that you have a good Wi-Fi® connection
available.
BLINK1_EU_A6_v9_2012_12_24.indd 2-3
24/12/2012 11:19 AM
1. Safety Instructions
1. Safety Instructions........................................................................... 5
2. System Requirements...................................................................... 7
3. Getting started - Connecting Devices............................................ 8
3.1 Procedure for resetting the Camera:........................................ 8
3.2 User Account and Camera Setup:
Working with devices for Android™......................................... 9
3.3 User Account and Camera Setup:
Working with iPhone®/iPad®................................................... 13
4. Camera............................................................................................ 19
4.1 Connecting the Camera to Power........................................... 19
4.2 Camera Functions:
Working with PC/Notebook...................................................... 19
4.3 Adding another Camera:
Working with PC/Notebook...................................................... 21
4.4 Viewing another Camera:
Working with PC/Notebook...................................................... 22
4.5 Camera Functions:
Working with devices for Android™....................................... 23
4.6 Adding another Camera:
Working with devices for Android™....................................... 25
4.7 Camera Functions:
Working with iPhone®/iPad®................................................... 28
4.8 Adding another Camera:
Working with iPhone®/iPad®................................................... 31
5. Help.................................................................................................. 31
6. General Information....................................................................... 37
7. Technical Specifications................................................................ 43
4
BLINK1_EU_A6_v9_2012_12_24.indd 4-5
ENGLISH
Table of Contents
Table of Contents
WARNING:
STRANGULATION HAZARD - Keep the adapter
cord out of the baby’s reach.
NEVER place the Wi-Fi® Camera Unit or cords
within the cot. Secure the cord some distance away from
the baby’s reach.
Never use extension cords with AC Adapters. Only use
the AC Adapters provided.
Wi-Fi® CAMERA UNIT SET UP & USE:
• Determine a location for the Wi-Fi® Camera Unit that will
provide the best view of your baby in the cot.
• Place the Wi-Fi® Camera Unit on a flat surface, such as a
dresser, bureau, or shelf, or wall-mount it using the keyhole
slot in the base.
• NEVER place the Wi-Fi® Camera Unit or cords within a
cot.
• Secure the cord to the wall to keep cord away from the
baby’s reach.
WARNING
This Wi-Fi® Camera Unit is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as
described in the User’s Guide, safe to use. Therefore, always
read the instructions in this User’s Guide carefully before using
the device.
Safety Instructions
5
24/12/2012 11:19 AM
• This product is not a toy. Do not allow children to play with it.
• This Wi-Fi® Camera Unit is not a substitute for responsible
adult supervision.
• Keep this user’s guide for future reference.
• Do not place the Wi-Fi® Camera Unit or cables in the cot or
within reach of the baby (the unit should be at least 3 feet
away).
• Keep the cords out of reach of children.
• Do not cover the Wi-Fi® Camera Unit with a towel or
blanket.
• Test the Wi-Fi® Camera Unit and all its functions so that you
are familiar with it prior to use.
• Do not use the Wi-Fi® Camera Unit near water.
• Do not install the Wi-Fi® Camera Unit near a heat source.
2. System Requirements
ENGLISH
• Adult assembly is required. Keep small parts away from
children when assembling.
Web Portal
•
•
•
•
•
•
•
Windows® system XP SP3 or above
Mac OS® version 10.7 or above
Internet Explorer® version 8.0 or above
Firefox® version 11.0 or above
Chrome™ version 18.0 or above
Safari® version 5.1 or above
Java™ version 7 or above
Android™ System
• Version 2.3.6 or above
iPhone®/iPad® iOS
• Version 4.3 or above
• Only use the power adapter provided. Do not use other
power adapters as this may damage the device.
• Never use extension cords with power adapters.
• Do not touch the plug contacts with sharp or metal objects.
6
BLINK1_EU_A6_v9_2012_12_24.indd 6-7
Safety Instructions
System Requirements
7
24/12/2012 11:19 AM
Connect the Camera to the power adapter and plug it into a
suitable mains power socket. The Camera must be within range
of the Wi-Fi® router with which you want it to link.
3.1 Procedure for resetting the Camera:
Note: If your camera is moved from one router (e.g. home) to
another router (e.g. office), then this camera must be reset
again, and then the camera set up again for devices for
Android™ or iPhone®/iPad®.
1. Switch the ON/OFF switch to OFF.
2. Press and hold the RESET button on the underside of
the camera.
3. Switch the ON/OFF switch to ON.
4. Keep pressing the RESET button until you hear a beep
sound.
5. Release the RESET button and wait for the camera to
complete the internal reset procedure.
6. After about 60 seconds you will hear two short beeps and
the green LED starts blinking.
• Please be patient, it may take a few minutes until your camera
appears in your Wi-Fi® devices list, or is added to your account.
3.2 User Account and Camera Setup:
Working with devices for Android™
ENGLISH
3. Getting started - Connecting Devices
• Download and install the application “Monitor Everywhere”
from the Google Play™ Store. Note: If you can’t find the
application, then use your device browser to go to
www.monitoreverywhere.com for advice on how to install.
• Turn on the Wi-Fi® of your device for Android™ and select
your wireless network.
• Switch on the camera (see 3.1 Procedure for resetting the
Camera).
• Run the “Monitor Everywhere” application. After initialisation,
the Baby Monitor Setup wizard appears.
• Select CREATE ACCOUNT.
• Once the camera has been added, the camera view will be
displayed automatically.
Status of LED Indication:
- Reset / Setup state: fast blinking
- Unconnect state: slow blinking
- Connect state: always on
• Select GET STARTED.
• Follow the on-screen instructions and select the camera
and the Wi-Fi® connection that your camera can use. If
necessary enter a password.
• Tap CONNECT TO Wi-Fi.
8
BLINK1_EU_A6_v9_2012_12_24.indd 8-9
Getting started
Getting started: Working with devices for Android™
9
24/12/2012 11:19 AM
• Follow the on screen checklist to ensure that your camera
is power connected and tap NEXT.
• Select the camera from the list.
• Select CREATE ACCOUNT.
• Enter a user name, a password and an e-mail address.
• Agree with the terms of use and select SIGN UP.
• Tap NEXT STEP.
10
Getting started: Working with devices for Android™
BLINK1_EU_A6_v9_2012_12_24.indd 10-11
If you cannot find the camera ID on the list, please reset the
camera with the following procedure:
1. Switch the ON/OFF switch to OFF.
2. Press and hold the RESET button on the underside of
the camera.
3. Switch the ON/OFF switch to ON.
4. Keep pressing the RESET button until you hear a beep
sound.
5. Release the RESET button and wait for the camera to
complete the internal reset procedure.
6. After about 60 seconds you will hear two short beeps and
the green LED starts blinking.
ENGLISH
• Tap NEXT STEP.
• Wait for up to five minutes. Should the connection process
take longer, tap CANCEL and try again.
• Ensure that you have a good Wi-Fi network connection.
Getting started: Working with devices for Android™
11
24/12/2012 11:19 AM
• Tap DONE.
• Tap START MONITOR to show the camera view.
• Tap VIEW to show the camera view and the controls.
3.3 User Account and Camera Setup:
Working with iPhone®/iPad®
• Install the application “Monitor Everywhere” from the
App StoreSM. Note: If you can’t find the application, then use
your device browser to go to www.monitoreverywhere.com
for advice on how to install.
ENGLISH
• Once your camera is installed, you can rename it.
• Run the “Monitor Everywhere” application and follow the
screen number sequence:
Note:
The Camera SSID is printed at the bottom of the Camera, for
example: ID: Camera-1006fa
On your PC/Notebook, devices for Android™ and iPhone®/
iPad®, you will see: Camera-1006fa.
12
Getting started: Working with devices for Android™
BLINK1_EU_A6_v9_2012_12_24.indd 12-13
S1
S2
• Select Setup Monitor Everywhere (pictures S1, 2).
Getting started: Working with iPhone®/iPad®
13
24/12/2012 11:19 AM
ENGLISH
S3
S5
• Tap Continue (picture S3).
• Switch on the camera (see 3.1 Procedure for resetting the
Camera) and follow the on-screen instruction.
S7
S4
• Tap Continue (picture S4).
14
Getting started: Working with iPhone®/iPad®
BLINK1_EU_A6_v9_2012_12_24.indd 14-15
S6
• On your iPhone® or iPad®, under Settings select Wi-Fi, then
select the camera from the network list and wait until it is
connected (pictures S5, 6).
S8
• Tap Configure Camera to Wi-Fi (pictures S7,8).
Getting started: Working with iPhone®/iPad®
15
24/12/2012 11:19 AM
ENGLISH
• Enter ‘Wi-Fi’ password for camera (picture S9), then press
Next.
• Press the iPhone® or iPad® HOME button and run the
“Monitor Everywhere” application again.
• Tap Create Account and enter a user name, a password
and an e-mail address (pictures S12, 13).
S9
• On your iPhone® or iPad®, under Settings select Wi-Fi.
Select your preferred Wi-Fi connection from the network list
and wait until it is connected (pictures S10, 11).
S10
16
S11
Getting started: Working with iPhone®/iPad®
BLINK1_EU_A6_v9_2012_12_24.indd 16-17
S12
S13
• Tap Done, by which you agree to the Terms of Use (picture S14).
S14
Getting started: Working with iPhone®/iPad®
17
24/12/2012 11:19 AM
ENGLISH
4. Camera
4.1 Connecting the Camera to Power
• Insert the small end of the Power Adapter into the Power
Adapter Connector and plug the Power Adapter into a
suitable mains socket.
• Slide the ON/OFF switch to ON, the green Power LED will
light up. (Note: To switch the device off, slide the ON/OFF
switch to OFF.)
S15
S16
• Tap Camera Test (pictures S15, 16).
4.2 Camera Functions:
Working with PC/Notebook
• Go to URL: https://www.monitoreverywhere.com.
• Enter the User Name and Password and then tap LOGIN, if
you have already created an account.
• Select the camera and tap VIEW to see the camera view and
control buttons.
• Tap on the icons for different functions:
S17
S18
• Tap Start monitor (picture S17).
• Tap on the Camera icon to start viewing (picture S18).
18
Getting started: Working with iPhone®/iPad®
BLINK1_EU_A6_v9_2012_12_24.indd 18-19
Camera Functions: Working with PC/Notebook
19
24/12/2012 11:19 AM
-
+ B + + + •
Play Lullaby:
•
--
-
+
+
!
•
CD
0/
+
•
0
#/
+
+
•
Tap the icon to reveal the Play Lullaby menu.
Select one of the five songs to play the lullaby.
Tap
Music OFF to stop playing.
-#B
+
•
5
4#&
+.
•
5
4&
.
•
•
,+
ENGLISH
•
•
C
Temperature:
The current room temperature will always be displayed in
the lower left corner.
• Tap LOGOUT to leave the account.
4.3 Adding another Camera:
Working with PC/Notebook
• Tap on the Monitor Everywhere logo and wait for the camera
list up-date.
+
)
5 •
•
$0
+
Speaker:
51- Tap the icon to turn audio monitoring ON or OFF.
Photo/Video:
Take a picture or record a video and select the space where
it should
be saved on your computer.
• Tap the plus button to add a camera to this account.
Camera Settings:
-
+ B + + + Under
Display, adjust the Video Quality.
•
C
Move
the sliders from left (-) to right (+) to adjust
Contrast,
Brightness, and Volume.
--
-
+
•
•
•
•
CD
•
0
•
•
5
4#&
+.
•
5
4&
.
•
•
,+
Pan and Tilt Function:
Tap the up and down buttons to tilt and the left and right
-#B
+
buttons
to pan.
• Select the Wi-Fi network to be connected with the camera.
If necessary enter the password of the Wi-Fi Network and
tap SUBMIT.
20
5 Camera Functions: Working with PC/Notebook
BLINK1_EU_A6_v9_2012_12_24.indd 20-21
•
Adding Camera: Working withPC/Notebook
21
24/12/2012 11:19 AM
ENGLISH
• Follow the on-screen checklist to ensure that your camera is
power connected. Tap NEXT.
4.5 Camera Functions:
Working with devices for Android™
• Run the “Monitor Everywhere” application.
• Enter the User Name and Password and then tap Login,
if you have already created an Account (see 3. Getting
Started/ Connecting Devices User Account and Camera
Setup).
• Select your camera from the list and then follow any
on-screen instructions to complete the connection process.
4.4 Viewing another Camera:
Working with PC/Notebook
• Tap VIEW OTHER CAMERA to view the camera list and
then pick your choice.
• Tap  to change the camera name or remove a camera
from the list. Tap the return button to return to the camera
list.
• Select the camera and tap View to see the camera view.
Tap the display to reveal the camera control icons.
• Tap on the
icons for different functions:
Camera Settings:
-
+ B + + + Change
Name, Adjust Camera Volume, Adjust Camera
C
Brightness,
Adjust Sound Sensitivity (Level 1(Low): a loud
noise
is required. Level 4 (High): a low noise will trigger
--
-
+
the
notification sent to devices for Android™), Change
CD
Temperature
Unit, Adjust Video Quality, Remove Camera,
0
Show
Information.
•
•
•
•
•
•
•
-#B
+
22
Adding/Viewing Camera: Working with PC/Notebook
•
5
4#&
+.
•
5
4&
.
Camera Functions: Working with devices for Android™
23
BLINK1_EU_A6_v9_2012_12_24.indd 22-23
•
•
,+
24/12/2012 11:19 AM
•
-
+ B + + + -
+ B + + + •
C
•
•
C
•• •
--
-
+
•• C
•
CD
--
-
+
•• •
0
CD
•• --
-
+
•
+
!
•
0
•
CD
0/
+
•
•
0
#/
+
+ -#B
+
•
•
5
4#&
+.
-#B
+
•
5
4&
.
•
5
4#&
+.
-#B
+
Notifications:
Turn ON/OFF the notification function for Sound and
Temperature Alert.
••
•
•
5
4&
.
5
4#&
+.
5
4&
.
,+
Lullaby:
Tap the icon to reveal the Lullaby menu. Turn music ON and
select
one of the five songs. Turn music OFF to stop playing.
,+
•
•
••
5 •
,+
•
5 +
)
•
$0
+
• 5 Microphone:
Tap the icon to turn on the talk back function to the camera.
$0
+
Press
and hold the oval microphone icon to speak, and
$0
+
51- release
it to stop.
••
•
Speaker:
51- 51- Turn audio monitoring ON or OFF.
ENGLISH
Pan and Tilt Function:
Press the up and down button to tilt and the left and right
button to pan.
Temperature:
The display will always show the current room temperature.
• Press the Menu button of your device for Android™ and
select Logout to leave the account.
4.6 Adding another Camera:
Working with devices for Android™
• To add another camera, please follow the screen number
sequence:
Baby.Monitor
Photo/Video:
Take a photo or record a video. Tap the icon to start the
camera function.
Tap the photo icon to activate the camera function.
Tap the video icon to activate the video function. Tap the red
dot to start, and the square to stop recording.
Photos and videos will be stored in the internal flash memory
of your device for Android™. They can be accessed from
Gallery or Media Player. To play videos, please use the
“Monitor Everywhere” application or a 3rd party application,
such as MX player, which is able to play MJPG (Motion-jpeg).
Zoom Function:
Slide the zoom from - to + to enlarge the view and vice
versa.
24
Camera Functions: Working with devices for Android™
BLINK1_EU_A6_v9_2012_12_24.indd 24-25
A1
• Tap Next. (picture A1)
A2
Adding another Camera: Working with devices for Android™ 25
A2.indd 1
17/12/12 2:46 PM
24/12/2012 11:19 AM
• Please be patient, it may take a few minutes until your
camera is added to your account (picture A6).
Baby’s Room
Sam’s Room
• Once the camera has been added, the camera view will be
automatically displayed.
Lucy’s Room
Note:
When you are accessing your camera via a network different
from your home network (over internet) by mobile (such as
devices for Android™ or iPhone ®), the following message will
periodically pop up:
“This video has been viewed for about 5 minutes. Do you want
to continue?”.
Press Yes to continue or No to stop viewing.
A3
A4
• Select your camera (picture A3) and then select your
preferred Wi-Fi® network (picture A4).
A4.indd 1
17/12/12 2:41 PM
Baby’s Room
Baby’s Room
Sam’s Room
Sam’s Room
Lucy’s Room
Baby’s Room
ENGLISH
• If requested, enter your network password (picture A5).
Lucy’s Room
Baby.Monitor
A5
A6
26 Adding another Camera: Working with devices for Android™
A4.indd 1
BLINK1_EU_A6_v9_2012_12_24.indd 26-27
A4.indd 1
17/12/12 2:41 PM
Adding another Camera: Working with devices for Android™ 27
17/12/12 2:41 PM
24/12/2012 11:19 AM
••
C
C
•
••
--
-
+
--
-
+
••
CD
CD
•
+
!
••
0
0
"
60/
+
•
•
"
.#/
+
+
-#B
+
-#B
+
4.7 Camera Functions:
Working with iPhone®/iPad®
•
•
Lullaby:
5
4#&
+.
5
4#&
+.
•
5
4&
.
•
5
4&
.
Tap the icon to reveal the Lullaby menu. Turn music ON and
one of the five songs. Turn music OFF to stop playing.
select
Select
Done or Cancel to return to the camera control icons.
,+
• Run the “Monitor Everywhere” application.
•
• If you have already created an account (see 3. Getting
,+
Started - Connecting Devices User Account and Camera
Microphone:
5 ;.
+
)
Setup), enter your password, then tap Return and Done.
5 Tap
the icon to turn on the talk back function to the camera.
• Tap on the camera icon to show the camera view.
$0
+
Tap
and hold the oval microphone icon to speak, and release
$0
+
• Tap the display to reveal the camera control icons.
it to stop.
•
•
•
•
••
•
Camera Speaker:
51- 51- Tap the icon to
turn audio monitoring ON or OFF.
Photo:
Tap the icon to start the camera function and take a photo.
Under Settings on your iPhone®, select Privacy > Photos.
Turn Baby Cam ON, allowing access to photos. Please
note, that video recording and playback are not supported on
iOS devices.
Zoom Function:
• Tap on the
icons for different functions:
Camera Settings:
-
+ B + + + Slide the zoom from - to + to enlarge the view and vice versa.
Change
Camera Name, Adjust Camera Volume, Adjust
CBrightness, Adjust Sound Sensitivity to trigger
Camera
notification
or Disable the monitor devices microphone to
--
-
+
avoid
notification,
Change Temperature Unit, Set Video
CD
Quality,
Remove this Camera, Show Information.
0
•
•
•
•
•
•
• Tap on Back to return to the camera control icons.
•
-#B
+
•
5
4#&
+.
•
5
4&
.
Pan and Tilt Function:
Tap the up and down buttons to tilt and the left and right
buttons to pan.
Temperature:
The current room temperature is always displayed in the top
left corner.
Tap Cameras to return to the Camera list.
Tap on
to add another camera to the list.
28
•
•
,+
Camera Functions: Working with iPhone®/iPad®
5 BLINK1_EU_A6_v9_2012_12_24.indd
28-29
•
Camera Functions: Working with iPhone®/iPad®
29
24/12/2012 11:19 AM
• Tap Rename to give a camera a new name.
• Tap Alert Settings to receive notifications if a noise is
detected or the temperature in your baby’s room is too high
or too low.
4.8 Adding another Camera:
Working with iPhone®/iPad®
Follow the same steps as under 3.3 User Account and Camera
Setup, Working with iPhone®/iPad®.
ENGLISH
• Tap Remove to take a camera off the list.
ENGLISH
• Tap on Edit:
5. Help
Noise interference
To avoid background noise or echoes, ensure, that there is
enough distance between your device and the Wi-Fi® Camera
Unit.
Use of other 2.4 GHz products, such as Bluetooth systems or
microwave ovens, may cause interference with this product.
Keep the Wi-Fi® Camera Unit at least 5ft away from these
types of products, or turn them off if they appear to be causing
interference.
• If you use Alert Settings, under Settings on your iPhone®/
iPad®, select Notifications > Baby Cam > Notification
Centre ON.
• Select your preferred Alert Style and return to the application
and tap Done.
• Tap Cancel to return to the camera list.
• Tap on Account to change the password.
Lost connection
Check your Wi-Fi settings. If necessary reconnect your Wi-Fi.
Ensure the Wi-Fi® Camera Unit is switched ON. Wait a few
minutes to make the connection with the Wi-Fi system.
If you forgot your password
If you do not remember your password, tap Forgot password
and submit your e-mail address. A new password will be sent to
your e-mail address immediately.
• Tap on Logout to leave the account.
30
Adding another Camera: Working with iPhone®/iPad®
BLINK1_EU_A6_v9_2012_12_24.indd 30-31
Help
31
24/12/2012 11:19 AM
Solution
I am unable to login even after
registration.
Please check your user name and
password.
I receive an error message
saying:
“Email ID is not registered”.
Please ensure that you have
registered with us. Tap Create
Account to create an account to be
able to use the Wi-Fi® Baby Monitor
Unit.
What do I do if I forgot my
password ?
Click on the “Forgot Password” link
on the www.monitoreverywhere.
com website OR your Android™ or
iOS application. We will send a new
password to your registered e-mail ID.
I am unable to receive a new
1. The e-mail might have been sent
password although I have used
to your Junk Mail Folder.
the “Forgot password” option.
Please check your Junk Mail
Folder.
2. There might be a delay in getting
your e-mail. Please wait for a
while and check again.
When I am in “remote mode”,
When you are accessing your
the video stops after 5 minutes. camera via a network different from
How do I view for longer.
your home network (over internet)
your video times out after 5 minutes.
You can click on the Camera again
from the Android™/iOS application to
start streaming again.
If you are accessing from your webbrowser, then you can press on the
Reload button to start viewing your
camera video stream again.
32
BLINK1_EU_A6_v9_2012_12_24.indd 32-33
Help
My Phone application displays
the following message:
“Unable to connect to BMS
server”.
1.Check the Wi-Fi network strength.
2.Check if you are connected to
internet by starting the phone
browser and going to a website
like www.google.com.
3.Try again if you are successful
connecting to internet.
While I am adding a new
camera to my account, I am
not able to find any cameras
to add.
If you are trying to add a camera
which has previously been added
into your account / another account,
you will first have to reset the
camera. This can be done by
pressing and holding the RESET
button at the bottom of the camera
for 6 seconds.
What are the supported
browsers for accessing from
my PC/MAC?
On PC and MAC, we recommend to
use Google Chrome. However the
following browsers are also supported:
PC: Internet Explorer 8 and above
MAC: Safari
ENGLISH
Problem
Description / Error
I am having problems to access Please check your home Wi-Fi router
the camera from remote PC or settings and enable UPNP on your
from my 3G phone.
router for better performance to
stream to a remote device.
If you have multiple Wi-Fi routers at
your home, please configure your
camera to connect to the router
which has the Broadband / line connection.
Help
33
24/12/2012 11:19 AM
Even though I am accessing
my camera from the same
Wi-Fi network, I still find my
camera is shown as remote. I
can only access it for 5 minutes
at a time.
Please check your wireless router
settings. In routers like Buffalo there
is an option called Wireless Isolation.
Please disable this option.
When I try to view the camera,
I get a prompt for camera
firmware upgrade. What should
I do ?
Please upgrade your firmware. This
takes around 5 minutes. We push upgrades from time to time to improve
the camera features.
I am not able to find the iOS
SM.
application in the App Store
This is a known issue for some users
using iOS version 6.0.1. Please
use the following link on your iPad
browser to download the application.
https://itunes.apple.com/us/
app/monitor-everywhere/
id577753318?mt=8&uo=4
I am not able to access my
camera.
Please check if the camera is within
Wi-Fi range. If the LED on your
camera is slow blinking, please try to
move the camera closer to the router
for better Wi-Fi range and try again.
Which platforms are supported
for accessing my camera?
During setup on device for Android™ and iOS, during the last
step I am not able to find my
camera and the setup fails.
Please reset the camera to setup
mode and try again. Press and hold
the RESET button on the bottom
of the camera untill you hear a
long beep. Wait for a minute for the
camera to restart. The camera LED
is blinking fast, indicating that it is in
setup mode.
Android™ OS version 2.3.6 or above
iOS version 4.3 or above
Windows® XP SP3 or above
Internet Explorer®
Chrome™
MAC OS®
Safari®
I do not hear the sound when
I am accessing a remote
camera.
You can tap on the speaker icon
in the video stream screen to hear
audio. By default the audio is not ON
when you are accessing a remote
camera.
34
BLINK1_EU_A6_v9_2012_12_24.indd 34-35
Help
Help
ENGLISH
What is the significance of LED A blinking LED indicates the following
blinking?
status:
Fast blinking: Your camera is in setup
mode. You can add the camera to
your account in this mode. Out of the
box, the camera is in setup mode. To
reset to setup mode, press and hold
the RESET button on the bottom of
the camera untill you hear a long
beep.
Slow blinking: The camera is either
connecting to the router or lost the
link to the router. Please ensure that
the camera is in the Wi-Fi signal
range. In a typical home scenario,
the range is about 80-100feet
LED is stable: The camera is
connected to the Wi-Fi network.
35
24/12/2012 11:19 AM
What does the message
“PAN TILT disabled because of
network speed” mean ?
When you are accessing your
camera from the same wireless
network (Home) in which it is
configured, it is a local camera.
When you are accessing your
camera away from your home it is a
remote camera. You may be using
3G or Wi-Fi connection outside of
your home.
When your network speed is low, the
PAN and TILT is disabled. You can
see the message on the application
screen when this occurs.
I am having problems to access The following links take you to the
my cameras from Internet
troubleshooting guide for Internet
Explorer. What should I do ?
Explorer related issues.
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?nojavaie
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?javadisabledie
I am having problems to access The following links take you to the
my cameras from Google
troubleshooting guide for Google
Chrome™. What should I do ? Chrome™ related issues.
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?nojavach
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?javadisabledch
I am having problems to access The following links take you to the
my cameras from Safari on
troubleshooting guide for Safari on
MAC. What should I do ?
MAC.
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?javadisabledsf
https://monitoreverywhere.com/BMS/
troubleshoot.jsp?nojavasf
36
BLINK1_EU_A6_v9_2012_12_24.indd 36-37
Help
I am not able to access my
cameras on Internet Explorer®.
I am using Internet Explorer®
version 6 OR Version 7.
The minimum requirement is to have
Internet Explorer® version greater
than 7. Please upgrade your
browser. You can also use Google
Chrome™ to access.
ENGLISH
What is the meaning of
“Local camera” and “Remote
Camera”?
6. General Information
If your product is not working properly....
1. Read this User’s Guide.
2. Contact Customer Service at:
+49 (0) 1805 938 802
Email: motorola-mbp@tdm.de
Consumer Products and Accessories Limited
Warranty (“Warranty”)
Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD
(“BINATONE”).
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE
warrants that this Motorola branded product (“Product”) or
certified accessory (“Accessory”) sold for use with this product
that it manufactured to be free from defects in materials and
workmanship under normal consumer usage for the period
outlined below. This Warranty is your exclusive warranty and is
not transferable.
Help
37
24/12/2012 11:19 AM
This Warranty extends only to the first consumer purchaser, and
is not transferable.
What will BINATONE do?
BINATONE or its authorised distributor at its option and within
a commercially reasonable time, will at no charge repair or
replace any Products or Accessories that do not conform to this
Warranty. We may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or parts.
Some jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length
of an implied warranty, so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
rights, and you may also have other rights that vary from one
jurisdiction to another.
Products covered
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS
OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF
OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT
THESE DAMAGES MAY BE DISCLAIMED BY LAW.
38
BLINK1_EU_A6_v9_2012_12_24.indd 38-39
General Information
Length of Coverage
Consumer Products
Two (2) years from the date of
the products original purchase
by the first consumer purchaser
of the product.
Consumer Accessories
Ninety (90) days from the date
of the accessories original
purchase by the first consumer
purchaser of the product.
Consumer Products
and Accessories that
are repaired or replaced
The balance of the original
warranty or for Ninety (90)
days from the date returned to the
consumer, whichever is longer.
What Other Limitations Are There?
General Information
ENGLISH
Who is covered?
39
24/12/2012 11:19 AM
How to Obtain Warranty Service or Other Information?
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Abuse & Misuse. Defects or damage that result from:
(a) improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to
the surface of the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy perspiration, sand,
dirt or the like, extreme heat, or food; (c) use of the Products or
Accessories for commercial purposes or subjecting the Product
or Accessory to abnormal usage or conditions; or (d) other
acts which are not the fault of MOTOROLA or BINATONE, are
excluded from coverage.
Use of Non-Motorola branded Products and Accessories.
Defects or damage that result from the use of Non-Motorola
branded or certified Products or Accessories or other peripheral
equipment are excluded from coverage.
Unauthorised Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone
other than MOTOROLA, BINATONE or its authorised service
centres, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers
or date tags that have been removed, altered or obliterated; (b)
broken seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products or Accessories due to any communication service
or signal you may subscribe to or use with the Products or
Accessories is excluded from coverage.
40
BLINK1_EU_A6_v9_2012_12_24.indd 40-41
ENGLISH
Exclusions
General Information
To obtain service or information, please call/e-mail:
+49 (0) 1805 938 802
Email: motorola-mbp@tdm.de
You will receive instructions on how to ship the Products or
Accessories at your expense and risk, to a BINATONE
Authorised Repair Centre.
To obtain service, you must include: (a) the Product or
Accessory; (b) the original proof of purchase (receipt) which
includes the date, place and seller of the Product; (c) if a
warranty card was included in your box, a completed warranty
card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your
address and telephone number.
These terms and conditions constitute the complete warranty
agreement between you and BINATONE regarding the Products
or Accessories purchased by you, and supersede any prior
agreement or representations, including representations made
in any literature publications or promotional materials issued by
BINATONE or representations made by any agent, employee
or staff of BINATONE, that may have been made in connection
with the said purchase.
General Information
41
24/12/2012 11:19 AM
ENGLISH
DISPOSAL OF THE DEVICE (ENVIRONMENT)
At the end of the product lifecycle, you should not throw this
product into the normal household garbage but bring the product
to a collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user guide and/or box
indicate this. Some of the product materials can be re-used if you
bring them to a recycling point. By reusing some parts or raw
materials from used products you make an important contribution
to the protection of the environment. Please contact your local
authorities in case you need more information on the collection
points in your area.
Batteries must be removed before disposing of the device.
Dispose of the batteries in an environmental manner
according to your country regulations.
42
BLINK1_EU_A6_v9_2012_12_24.indd 42-43
General Information
General Information
43
24/12/2012 11:19 AM
Camera Unit
Wi-Fi
802.11 b/g/n
Image sensor
Colour CMOS
Lens
f 2.6 mm, F = 2.8
IR LED
8 pcs
Power
Adapter:
Type
Input
Output
By Keen Ocean Industrial Ltd.
P/N: S01-005-0050-01000
100-240 VAC, 50/60 Hz, 0.15 A
5 V DC, 1000 mA
Manufactured, distributed or sold by
Binatone Electronics International LTD.,
and the Stylized M logo are trademarks or
registered trademarks of Motorola Trademark
Holdings, LLC. and are used under license.
Mac, Mac OS, iPhone, iPad and Safari are
the trademarks of Apple Inc., registered
in the U.S. and other countries. Android
and Chrome are registered trademarks of
Google Inc., used with permission. Wi-Fi is a
trademark of the Wi-Fi Alliance. Windows XP
and Internet Explorer are trademarks of the
Microsoft group of companies. Oracle and
Java are registered trademarks of Oracle and
property of their respective owners.
© 2012 Motorola Mobility LLC.
All rights reserved.
44
42
BLINK1_EU_A6_v9_2012_12_24.indd 44
General Information
Version 1.0
Printed in China
43
24/12/2012 11:19 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising