SPG Plus 3-Axis Gimbal Rig for iPhone EN 2016.10.7

SPG Plus 3-Axis Gimbal Rig for iPhone EN 2016.10.7
Instruction Manual
1. Product Overview
1/4 inch
screw hole
1/4 inch
screw hole
1/4 inch
screw hole
* The showing smartphone
is only for reference
2. User Guide
Attention !
!
3. Modes / Functions
(1) Please install the iPhone before powering on the gimbal
(2) Please turn off the power when the gimbal is not in use, then remove the iPhone
Install the battery
2
Rolling axis
1/4 inch
screw hole
USB port
Indicator
1
Joystick
3
Tips: Please take off the protective casing of the iPhone
before installation.
(ON / OFF)
Bluetooth
shutter 4
Knob ring
If the iPhone tilted to the right, then
loose the knob ring,move the cross
arm to the left, try to adjust to the
best balance then tight it.
Function button
Blue light flashes once
Blue light flashes twice
Panning and Tilting mode
Blue light flashes for three limes Standby
Blue light constant on
Initialization failure / Malfunction
Red light keeps flashing
Entering standby / Entering power off
Red light flashes three times
4
Lock mode / Initializing
Blue light keeps flashing
Bluetooth Shutter
3
Joystick
Low battery
Joystick
Camera lens
Down
Up
Up
Left
Right
Right
Bluetooth name: FY_SPGPlus_xx
When you change your iPhone, please first shutdown Bluetooth of the previous one, then start Bluetooth pairing for the new one.
10 pieces of pairing info can be stored in this product.
Bluetooth pairing information clear: In boot-up state, long press the Bluetooth Shutter of the gimbal until the red light is
on to clear all the bluetooth pairing info. After clearing, iPhone paired previously need to ignore "FY_SPGPlus_xx" first,
then shutdown the Bluetooth of iPhone and reopen it to pair anew.
Using App: You can perform various settings and operations via specified smartphone app("Feiyu On") when the bluetooth is paired.
If the iPhone tilted to the left, then loose
the knob ring,move the cross arm to the
right, try to adjust to the best balance then
tight it.
Cross arm
Left
Connecting steps:
(1) Turn on the bluetooth of your iPhone.
(2) Connect your iPhone with "FY_SPGPlus_xx".
(3) It can act as a mobile phone camera shutter after a successful connection.
T
L
Down
Tips: Make sure the volume "+" key of your iPhone can control the shooting.
After connecting with bluetooth , the button can be used as shutter function and the gimbal indicator will blinks a green light
every 10 seconds.
GuiLin FeiYu Technology Incorporated Company
Knob ring
OFF:Long press Function Button and release it until the
red light changes from quick flashing to constant.
Panning mode
Power on / off
4
Power on: Long press Function Button and release it until the green light is on.
Power off:Long press Function Button and release it until the red light changes from quick flashing to constant.
Attention: Turn the gimbal on after ensuring the iPhone is secure.
!
If the battery power is too low, the red light will flash 3 times every 5 seconds.
Please shut down the gimbal in time, and recharge or replace the battery.
Mode / Function Operation Instructions
Function
Double tap
Panning and Tilting Mode
Under panning and tilting mode, single tap to switch to lock mode
Triple tap
Rotate 180°in horizontal
Make the lens rotate 180 °
Quadruple tap
Reset
Reset the tilting axis of the gimbal to initial orientation and initial mode
Long press until
the red light
flashes quickly
Standby
Single tap again to awake the gimbal, or triple tap to initialize the gimbal
Panning Mode / Lock Mode
Explanation
Single tap to switch between panning mode and lock mode
4. Charging
5V USB power adapter
(Equipped by user )
Product model
Panning Angle
360°
Batteries (Type:22650)
100°
SPG Plus
Quantity
USB cable
The red indicator light is on during charging, and green light is on after the battery is fully charged.
1
Usage time
8 Hours
1/4 inch screw
1
518g(not including battery and iPhone)
Warranty card
1
Panning Increments
3°/s ~ 150°/s
iPhone 7 Plus/7/6s Plus/6s/6 Plus/6/SE/5c/5s/5
Weight
DISCLAIMER
Prohibit any user for any illegal purpose. Users will be responsible for
all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting
from the debug and use of this product (including the direct, indirect
or third-party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may
cause changes in function descriptions in this user manual, please
read the instructions carefully before upgrading the firmware and use
the corresponding user manual.
Cold shoe mount
User manual
For more information, please visit our official website
www.feiyu-tech.com
Support Email: service@feiyu-tech.com
1
1
Attention
Please correctly assemble the gimbal in
accordance with the diagram.
Please install the iPhone before powering
on the gimbal.
When the gimbal is not in use or placed on
the table, please ensure it is powered off.
After power off, connect the USB cable to USB port, and connect with 5V USB power adapter (equipped by user)
Or take out the battery, and use the corresponding charger to charge the battery (equipped by user).
1
2°/s ~ 75°/s
USB Port
by USB cable .
1
Titling Increments
You can get the latest user manual from the official website:
www.feiyu-tech.com
Feiyu Tech reserves the right to amend this manual and the terms
and conditions of use the product at any time.
Micro-USB
USB cable
320°
Adaption
Function Button
Single tap
Cross arm
ON: Long press Function Button and release it until the
green light is on.
Mode / Status
T
L
Please refer to“Modes / Functions”.
Indicator Status
In standby mode, keep the gimbal in power-up state, the motor stops working, the indicator light flashes for three
times, and single tap again the function button to wake up the gimbal.
Pac kage List
Titling Angle
Rolling Angle
Standby
T = Tight
L = Loose
Handle
You can using the function button to switch the
working mode, power on or power off the gimbal.
6. Parameters
Reset the tilting axis of the gimbal to initial orientation and initial mode.
How to balance adjustment
(2) Lay the gimbal on a static flat surface and triple tap the Function Button. Initialization is successful when the blue
light changes from constant on to flashing 3 times periodically.
Other Functions
Reset
Best Balance
Adjusting steps:
(1) In boot-up state, long press the Function Button until the red light flashes quickly to enter standby status, the blue
light will flash 3 times periodically.
When the initialization failed, the LED indicator will flash quickly, repeat step (2) to reinitialize.
As shown, roll the gimbal slowly to the right (or left) 90°, the rolling axis
automatically follow to the right (or left) is rotated by 90°.
In order to achieve in a better performance of the gimbal,
please try to adjust the iPhone installation to the best balance.
2
The phone stays in its current orientation.
The panning, tilting and rolling direction are all fixed.
Convenient for the iPhone users to shot panorama photo.
Function button
Tilting
1
(3)Under lock mode, the panning angle drifts.
Panorama
Balance Adjustment
3
Panning
axis
2
(2)The roll angle is not parallel to the horizontal surface.
Lock Mode
Install the iPhone
Attach the iPhone by the quick-release adapter, and ensure it is secure.
Remove the handle and insert one
22650 battery into it.
Rolling
Panning Mode
The phone can move to left or right and tilt up and down smoothly along with the handheld moving.
The rolling directions fixed.
2
1
1/4 inch
screw hole
The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal
Panning and Tilting Mode
1
( Initialize the gimbal )
(1)The tilt angle is not leveled with the horizontal surface.
* Boot default mode: Panning mode
Tilting
axis
iPhone 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6
iPhone SE / 5s / 5c / 5
Working Modes
The phone can move to left or right smoothly along with the handheld moving.
The tilting and rolling directions fixed.
Panning
360°
3-Axis Gimbal Rig for iPhone
5. Gimbal Horizontal Angle Adjustment
www.feiyu-tech.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising